From 532ededd5cbff3d55e8c8e5b6377cec9e90f2152 Mon Sep 17 00:00:00 2001 From: Jean-Jacques Hiblot Date: Thu, 29 Nov 2018 10:57:47 +0100 Subject: [PATCH] board: ti: am57xx: remove USB platform code Signed-off-by: Jean-Jacques Hiblot Reviewed-by: Tom Rini --- board/ti/am57xx/board.c | 85 ----------------------------------------- 1 file changed, 85 deletions(-) diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c index bed2eb3c39..8dfb2eea43 100644 --- a/board/ti/am57xx/board.c +++ b/board/ti/am57xx/board.c @@ -883,91 +883,6 @@ int spl_start_uboot(void) } #endif -#if defined(CONFIG_USB_DWC3) && !CONFIG_IS_ENABLED(DM_USB) -static struct dwc3_device usb_otg_ss2 = { - .maximum_speed = USB_SPEED_HIGH, - .base = DRA7_USB_OTG_SS2_BASE, - .tx_fifo_resize = false, - .index = 1, -}; - -static struct dwc3_omap_device usb_otg_ss2_glue = { - .base = (void *)DRA7_USB_OTG_SS2_GLUE_BASE, - .utmi_mode = DWC3_OMAP_UTMI_MODE_SW, - .index = 1, -}; - -static struct ti_usb_phy_device usb_phy2_device = { - .usb2_phy_power = (void *)DRA7_USB2_PHY2_POWER, - .index = 1, -}; - -int usb_gadget_handle_interrupts(int index) -{ - u32 status; - - status = dwc3_omap_uboot_interrupt_status(index); - if (status) - dwc3_uboot_handle_interrupt(index); - - return 0; -} - -int board_usb_init(int index, enum usb_init_type init) -{ - enable_usb_clocks(index); - switch (index) { - case 0: - if (init == USB_INIT_DEVICE) { - printf("port %d can't be used as device\n", index); - disable_usb_clocks(index); - return -EINVAL; - } - break; - case 1: - if (init == USB_INIT_DEVICE) { -#ifdef CONFIG_USB_DWC3 - usb_otg_ss2.dr_mode = USB_DR_MODE_PERIPHERAL; - usb_otg_ss2_glue.vbus_id_status = OMAP_DWC3_VBUS_VALID; - ti_usb_phy_uboot_init(&usb_phy2_device); - dwc3_omap_uboot_init(&usb_otg_ss2_glue); - dwc3_uboot_init(&usb_otg_ss2); -#endif - } else { - printf("port %d can't be used as host\n", index); - disable_usb_clocks(index); - return -EINVAL; - } - - break; - default: - printf("Invalid Controller Index\n"); - } - - return 0; -} - -int board_usb_cleanup(int index, enum usb_init_type init) -{ -#ifdef CONFIG_USB_DWC3 - switch (index) { - case 0: - case 1: - if (init == USB_INIT_DEVICE) { - ti_usb_phy_uboot_exit(index); - dwc3_uboot_exit(index); - dwc3_omap_uboot_exit(index); - } - break; - default: - printf("Invalid Controller Index\n"); - } -#endif - disable_usb_clocks(index); - return 0; -} -#endif /* defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_XHCI_OMAP) */ - #ifdef CONFIG_DRIVER_TI_CPSW /* Delay value to add to calibrated value */ -- 2.39.5