From 4a470044e15031b59b8e66d12e92f2d13da009c9 Mon Sep 17 00:00:00 2001 From: Christophe Kerello Date: Fri, 31 Jul 2020 09:53:36 +0200 Subject: [PATCH] mtd: rawnand: stm32_fmc2: use FMC2_TIMEOUT_5S for timeouts FMC2_TIMEOUT_5S will be used each time that we need to wait. It was seen, during stress tests in an overloaded system, that we could be close to 1 second, even if we never met this value. To be safe, FMC2_TIMEOUT_MS is set to 5 seconds. Signed-off-by: Christophe Kerello Reviewed-by: Patrice Chotard --- drivers/mtd/nand/raw/stm32_fmc2_nand.c | 8 +++++--- 1 file changed, 5 insertions(+), 3 deletions(-) diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c index f43e3ec6b6..2e947a3400 100644 --- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c +++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c @@ -131,6 +131,8 @@ #define FMC2_NSEC_PER_SEC 1000000000L +#define FMC2_TIMEOUT_5S 5000000 + enum stm32_fmc2_ecc { FMC2_ECC_HAM = 1, FMC2_ECC_BCH4 = 4, @@ -339,7 +341,7 @@ static int stm32_fmc2_ham_calculate(struct mtd_info *mtd, const u8 *data, int ret; ret = readl_poll_timeout(fmc2->io_base + FMC2_SR, sr, - sr & FMC2_SR_NWRF, 10000); + sr & FMC2_SR_NWRF, FMC2_TIMEOUT_5S); if (ret < 0) { pr_err("Ham timeout\n"); return ret; @@ -424,7 +426,7 @@ static int stm32_fmc2_bch_calculate(struct mtd_info *mtd, const u8 *data, /* Wait until the BCH code is ready */ ret = readl_poll_timeout(fmc2->io_base + FMC2_BCHISR, bchisr, - bchisr & FMC2_BCHISR_EPBRF, 10000); + bchisr & FMC2_BCHISR_EPBRF, FMC2_TIMEOUT_5S); if (ret < 0) { pr_err("Bch timeout\n"); return ret; @@ -472,7 +474,7 @@ static int stm32_fmc2_bch_correct(struct mtd_info *mtd, u8 *dat, /* Wait until the decoding error is ready */ ret = readl_poll_timeout(fmc2->io_base + FMC2_BCHISR, bchisr, - bchisr & FMC2_BCHISR_DERF, 10000); + bchisr & FMC2_BCHISR_DERF, FMC2_TIMEOUT_5S); if (ret < 0) { pr_err("Bch timeout\n"); return ret; -- 2.39.5