From 49e508e962df731590c3785af0d94493864c61ff Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 6 Aug 2018 21:47:50 +0200 Subject: [PATCH] ARM: socfpga: clk: Make L4SP and MMC clock calculation Gen5 only The L4SP and MMC clock precalculation is specific to Gen5, it is not needed on Arria10/Stratix10. Isolate it to Gen5 until there is a proper clock driver for Gen5, at which point this will go away completely. Signed-off-by: Marek Vasut Cc: Chin Liang See Cc: Dinh Nguyen Cc: Ley Foon Tan --- arch/arm/mach-socfpga/clock_manager.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/mach-socfpga/clock_manager.c b/arch/arm/mach-socfpga/clock_manager.c index 59ede59b59..9f3c643df8 100644 --- a/arch/arm/mach-socfpga/clock_manager.c +++ b/arch/arm/mach-socfpga/clock_manager.c @@ -42,9 +42,11 @@ int cm_wait_for_fsm(void) int set_cpu_clk_info(void) { +#if defined(CONFIG_TARGET_SOCFPGA_GEN5) /* Calculate the clock frequencies required for drivers */ cm_get_l4_sp_clk_hz(); cm_get_mmc_controller_clk_hz(); +#endif gd->bd->bi_arm_freq = cm_get_mpu_clk_hz() / 1000000; gd->bd->bi_dsp_freq = 0; -- 2.39.5