From 4509b9ff0b8cb26907f9e9c3571b43565c859275 Mon Sep 17 00:00:00 2001 From: Neha Malcom Francis Date: Wed, 15 Nov 2023 15:40:24 +0530 Subject: [PATCH] arm: dts: k3-*-binman: Move to using templated FITs Reduce redundancy in code by using templates to generate the A72 boot binaries (tispl.bin and u-boot.img) as well as R5 boot binary sysfw.itb (for legacy boot following devices J721E and AM65x). Signed-off-by: Neha Malcom Francis Acked-by: Andrew Davis Reviewed-by: Simon Glass Reviewed-by: Manorit Chawdhry --- arch/arm/dts/k3-am625-sk-binman.dtsi | 157 +-------- .../dts/k3-am625-verdin-wifi-dev-binman.dtsi | 155 +------- arch/arm/dts/k3-am62a-sk-binman.dtsi | 158 +-------- arch/arm/dts/k3-am64x-binman.dtsi | 151 +------- arch/arm/dts/k3-am65x-binman.dtsi | 273 +------------- arch/arm/dts/k3-j7200-binman.dtsi | 159 +-------- arch/arm/dts/k3-j721e-binman.dtsi | 332 +----------------- arch/arm/dts/k3-j721s2-binman.dtsi | 157 +-------- 8 files changed, 54 insertions(+), 1488 deletions(-) diff --git a/arch/arm/dts/k3-am625-sk-binman.dtsi b/arch/arm/dts/k3-am625-sk-binman.dtsi index 41277bf4bf..b7b5368886 100644 --- a/arch/arm/dts/k3-am625-sk-binman.dtsi +++ b/arch/arm/dts/k3-am625-sk-binman.dtsi @@ -141,10 +141,7 @@ #ifdef CONFIG_TARGET_AM625_A53_EVM -#define SPL_NODTB "spl/u-boot-spl-nodtb.bin" #define SPL_AM625_SK_DTB "spl/dts/k3-am625-sk.dtb" - -#define UBOOT_NODTB "u-boot-nodtb.bin" #define AM625_SK_DTB "u-boot.dtb" &binman { @@ -155,55 +152,11 @@ }; }; ti-spl { - filename = "tispl.bin"; - pad-byte = <0xff>; + insert-template = <&ti_spl_template>; fit { - description = "Configuration to load ATF and SPL"; - #address-cells = <1>; - images { - - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - ti-secure { - content = <&atf>; - keyfile = "custMpk.pem"; - }; - atf: atf-bl31 { - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - ti-secure { - content = <&tee>; - keyfile = "custMpk.pem"; - }; - tee: tee-os { - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; ti-secure { content = <&dm>; keyfile = "custMpk.pem"; @@ -213,23 +166,6 @@ }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - ti-secure { - content = <&u_boot_spl_nodtb>; - keyfile = "custMpk.pem"; - }; - u_boot_spl_nodtb: blob-ext { - filename = SPL_NODTB; - }; - }; - fdt-0 { description = "k3-am625-sk"; type = "flat_dt"; @@ -263,29 +199,12 @@ &binman { u-boot { - filename = "u-boot.img"; - pad-byte = <0xff>; + insert-template = <&u_boot_template>; fit { - description = "FIT image with multiple configurations"; - images { uboot { - description = "U-Boot for AM625 board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - ti-secure { - content = <&u_boot_nodtb>; - keyfile = "custMpk.pem"; - }; - u_boot_nodtb: u-boot-nodtb { - }; - hash { - algo = "crc32"; - }; + description = "U-Boot for AM625 Board"; }; fdt-0 { @@ -323,67 +242,17 @@ &binman { ti-spl_unsigned { - filename = "tispl.bin_unsigned"; - pad-byte = <0xff>; + insert-template = <&ti_spl_unsigned_template>; fit { - description = "Configuration to load ATF and SPL"; - #address-cells = <1>; - images { - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - atf-bl31 { - filename = "bl31.bin"; - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - tee-os { - filename = "tee-raw.bin"; - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; blob-ext { filename = "ti-dm.bin"; }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - blob { - filename = "spl/u-boot-spl-nodtb.bin"; - }; - }; - fdt-0 { description = "k3-am625-sk"; type = "flat_dt"; @@ -411,26 +280,12 @@ &binman { u-boot_unsigned { - filename = "u-boot.img_unsigned"; - pad-byte = <0xff>; + insert-template = <&u_boot_unsigned_template>; fit { - description = "FIT image with multiple configurations"; - images { uboot { - description = "U-Boot for AM625 board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - blob { - filename = UBOOT_NODTB; - }; - hash { - algo = "crc32"; - }; + description = "U-Boot for AM625 Board"; }; fdt-0 { diff --git a/arch/arm/dts/k3-am625-verdin-wifi-dev-binman.dtsi b/arch/arm/dts/k3-am625-verdin-wifi-dev-binman.dtsi index 9c2d1df6b7..ed2c4482ef 100644 --- a/arch/arm/dts/k3-am625-verdin-wifi-dev-binman.dtsi +++ b/arch/arm/dts/k3-am625-verdin-wifi-dev-binman.dtsi @@ -206,10 +206,7 @@ #ifdef CONFIG_TARGET_VERDIN_AM62_A53 -#define SPL_NODTB "spl/u-boot-spl-nodtb.bin" #define SPL_VERDIN_AM62_DTB "spl/dts/k3-am625-verdin-wifi-dev.dtb" - -#define UBOOT_NODTB "u-boot-nodtb.bin" #define VERDIN_AM62_DTB "u-boot.dtb" &binman { @@ -220,54 +217,12 @@ }; }; ti-spl { - filename = "tispl.bin"; - pad-byte = <0xff>; + insert-template = <&ti_spl_template>; fit { - description = "Configuration to load ATF and SPL"; - #address-cells = <1>; images { - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - ti-secure { - content = <&atf>; - keyfile = "custMpk.pem"; - }; - atf: atf-bl31 { - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - ti-secure { - content = <&tee>; - keyfile = "custMpk.pem"; - }; - tee: tee-os { - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; ti-secure { content = <&dm>; keyfile = "custMpk.pem"; @@ -277,23 +232,6 @@ }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - ti-secure { - content = <&u_boot_spl_nodtb>; - keyfile = "custMpk.pem"; - }; - u_boot_spl_nodtb: blob-ext { - filename = SPL_NODTB; - }; - }; - fdt-0 { description = "k3-am625-verdin-wifi-dev"; type = "flat_dt"; @@ -325,29 +263,12 @@ &binman { u-boot { - filename = "u-boot.img"; - pad-byte = <0xff>; + insert-template = <&u_boot_template>; fit { - description = "FIT image with multiple configurations"; - images { uboot { - description = "U-Boot for AM625 board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - ti-secure { - content = <&u_boot_nodtb>; - keyfile = "custMpk.pem"; - }; - u_boot_nodtb: u-boot-nodtb { - }; - hash { - algo = "crc32"; - }; + description = "U-Boot fot AM625 Verdin Board"; }; fdt-0 { @@ -384,66 +305,16 @@ &binman { ti-spl_unsigned { - filename = "tispl.bin_unsigned"; - pad-byte = <0xff>; + insert-template = <&ti_spl_unsigned_template>; fit { - description = "Configuration to load ATF and SPL"; - #address-cells = <1>; - images { - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - atf-bl31 { - filename = "bl31.bin"; - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - tee-os { - filename = "tee-raw.bin"; - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; blob-ext { filename = "ti-dm.bin"; }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - blob { - filename = "spl/u-boot-spl-nodtb.bin"; - }; - }; - fdt-0 { description = "k3-am625-verdin-wifi-dev"; type = "flat_dt"; @@ -471,26 +342,12 @@ &binman { u-boot_unsigned { - filename = "u-boot.img_unsigned"; - pad-byte = <0xff>; + insert-template = <&u_boot_unsigned_template>; fit { - description = "FIT image with multiple configurations"; - images { uboot { - description = "U-Boot for AM625 board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - blob { - filename = UBOOT_NODTB; - }; - hash { - algo = "crc32"; - }; + description = "U-Boot for AM625 Verdin Board"; }; fdt-0 { diff --git a/arch/arm/dts/k3-am62a-sk-binman.dtsi b/arch/arm/dts/k3-am62a-sk-binman.dtsi index de09430d93..c5e027d44d 100644 --- a/arch/arm/dts/k3-am62a-sk-binman.dtsi +++ b/arch/arm/dts/k3-am62a-sk-binman.dtsi @@ -144,10 +144,7 @@ #ifdef CONFIG_TARGET_AM62A7_A53_EVM -#define SPL_NODTB "spl/u-boot-spl-nodtb.bin" #define SPL_AM62A7_SK_DTB "spl/dts/k3-am62a7-sk.dtb" - -#define UBOOT_NODTB "u-boot-nodtb.bin" #define AM62A7_SK_DTB "u-boot.dtb" &binman { @@ -158,55 +155,11 @@ }; }; ti-spl { - filename = "tispl.bin"; - pad-byte = <0xff>; + insert-template = <&ti_spl_template>; fit { - description = "Configuration to load ATF and SPL"; - #address-cells = <1>; - images { - - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - ti-secure { - content = <&atf>; - keyfile = "custMpk.pem"; - }; - atf: atf-bl31 { - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - ti-secure { - content = <&tee>; - keyfile = "custMpk.pem"; - }; - tee: tee-os { - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; ti-secure { content = <&dm>; keyfile = "custMpk.pem"; @@ -216,23 +169,6 @@ }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - ti-secure { - content = <&u_boot_spl_nodtb>; - keyfile = "custMpk.pem"; - }; - u_boot_spl_nodtb: blob-ext { - filename = SPL_NODTB; - }; - }; - fdt-0 { description = "k3-am62a7-sk"; type = "flat_dt"; @@ -266,29 +202,12 @@ &binman { u-boot { - filename = "u-boot.img"; - pad-byte = <0xff>; + insert-template = <&u_boot_template>; fit { - description = "FIT image with multiple configurations"; - images { uboot { - description = "U-Boot for AM62Ax board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - ti-secure { - content = <&u_boot_nodtb>; - keyfile = "custMpk.pem"; - }; - u_boot_nodtb: u-boot-nodtb { - }; - hash { - algo = "crc32"; - }; + description = "U-Boot for AM62Ax Board"; }; fdt-0 { @@ -326,67 +245,16 @@ &binman { ti-spl_unsigned { - filename = "tispl.bin_unsigned"; - pad-byte = <0xff>; + insert-template = <&ti_spl_unsigned_template>; fit { - description = "Configuration to load ATF and SPL"; - #address-cells = <1>; - images { - - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - atf-bl31 { - filename = "bl31.bin"; - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - tee-os { - filename = "tee-raw.bin"; - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; blob-ext { filename = "ti-dm.bin"; }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - blob { - filename = "spl/u-boot-spl-nodtb.bin"; - }; - }; - fdt-0 { description = "k3-am62a7-sk"; type = "flat_dt"; @@ -414,26 +282,12 @@ &binman { u-boot_unsigned { - filename = "u-boot.img_unsigned"; - pad-byte = <0xff>; + insert-template = <&u_boot_unsigned_template>; fit { - description = "FIT image with multiple configurations"; - images { uboot { - description = "U-Boot for AM62Ax board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - blob { - filename = UBOOT_NODTB; - }; - hash { - algo = "crc32"; - }; + description = "U-Boot for AM62Ax Board"; }; fdt-0 { diff --git a/arch/arm/dts/k3-am64x-binman.dtsi b/arch/arm/dts/k3-am64x-binman.dtsi index a5e54006b4..88df214954 100644 --- a/arch/arm/dts/k3-am64x-binman.dtsi +++ b/arch/arm/dts/k3-am64x-binman.dtsi @@ -118,87 +118,27 @@ #ifdef CONFIG_TARGET_AM642_A53_EVM -#define SPL_NODTB "spl/u-boot-spl-nodtb.bin" #define SPL_AM642_EVM_DTB "spl/dts/k3-am642-evm.dtb" #define SPL_AM642_SK_DTB "spl/dts/k3-am642-sk.dtb" -#define UBOOT_NODTB "u-boot-nodtb.bin" #define AM642_EVM_DTB "u-boot.dtb" #define AM642_SK_DTB "arch/arm/dts/k3-am642-sk.dtb" &binman { ti-spl { - filename = "tispl.bin"; - pad-byte = <0xff>; + insert-template = <&ti_spl_template>; fit { description = "Configuration to load ATF and SPL"; #address-cells = <1>; images { - - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - ti-secure { - content = <&atf>; - keyfile = "custMpk.pem"; - }; - atf: atf-bl31 { - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - ti-secure { - content = <&tee>; - keyfile = "custMpk.pem"; - }; - tee: tee-os { - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; blob-ext { filename = "/dev/null"; }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - ti-secure { - content = <&u_boot_spl_nodtb>; - keyfile = "custMpk.pem"; - - }; - u_boot_spl_nodtb: blob-ext { - filename = SPL_NODTB; - }; - }; fdt-0 { description = "k3-am642-evm"; @@ -254,29 +194,12 @@ &binman { u-boot { - filename = "u-boot.img"; - pad-byte = <0xff>; + insert-template = <&u_boot_template>; fit { - description = "FIT image with multiple configurations"; - images { uboot { - description = "U-Boot for AM64 board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - ti-secure { - content = <&u_boot_nodtb>; - keyfile = "custMpk.pem"; - }; - u_boot_nodtb: u-boot-nodtb { - }; - hash { - algo = "crc32"; - }; + description = "U-Boot for AM64 Board"; }; fdt-0 { @@ -340,65 +263,17 @@ &binman { ti-spl_unsigned { - filename = "tispl.bin_unsigned"; - pad-byte = <0xff>; + insert-template = <&ti_spl_unsigned_template>; fit { - description = "Configuration to load ATF and SPL"; - #address-cells = <1>; - images { - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - atf-bl31 { - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - tee-os { - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; blob-ext { filename = "/dev/null"; }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - blob { - filename = "spl/u-boot-spl-nodtb.bin"; - }; - }; - fdt-0 { description = "k3-am642-evm"; type = "flat_dt"; @@ -443,26 +318,12 @@ &binman { u-boot_unsigned { - filename = "u-boot.img_unsigned"; - pad-byte = <0xff>; + insert-template = <&u_boot_unsigned_template>; fit { - description = "FIT image with multiple configurations"; - images { uboot { - description = "U-Boot for AM64 board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - blob { - filename = UBOOT_NODTB; - }; - hash { - algo = "crc32"; - }; + description = "U-Boot for AM64 Board"; }; fdt-0 { diff --git a/arch/arm/dts/k3-am65x-binman.dtsi b/arch/arm/dts/k3-am65x-binman.dtsi index 59605ca597..8cc24da1f3 100644 --- a/arch/arm/dts/k3-am65x-binman.dtsi +++ b/arch/arm/dts/k3-am65x-binman.dtsi @@ -42,77 +42,7 @@ }; itb { filename = "sysfw-am65x_sr2-hs-evm.itb"; - fit { - description = "SYSFW and Config fragments"; - #address-cells = <1>; - images { - sysfw.bin { - description = "sysfw"; - type = "firmware"; - arch = "arm"; - compression = "none"; - blob-ext { - filename = "sysfw.bin"; - }; - }; - board-cfg.bin { - description = "board-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - ti-secure { - content = <&board_cfg>; - keyfile = "custMpk.pem"; - }; - board_cfg: board-cfg { - filename = "board-cfg.bin"; - type = "blob-ext"; - }; - }; - pm-cfg.bin { - description = "pm-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - ti-secure { - content = <&pm_cfg>; - keyfile = "custMpk.pem"; - }; - pm_cfg: pm-cfg { - filename = "pm-cfg.bin"; - type = "blob-ext"; - }; - }; - rm-cfg.bin { - description = "rm-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - ti-secure { - content = <&rm_cfg>; - keyfile = "custMpk.pem";\ - }; - rm_cfg: rm-cfg { - filename = "rm-cfg.bin"; - type = "blob-ext"; - }; - }; - sec-cfg.bin { - description = "sec-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - ti-secure { - content = <&sec_cfg>; - keyfile = "custMpk.pem"; - }; - sec_cfg: sec-cfg { - filename = "sec-cfg.bin"; - type = "blob-ext"; - }; - }; - }; - }; + insert-template = <&itb_template>; }; }; @@ -149,55 +79,14 @@ itb_gp { filename = "sysfw-am65x_sr2-gp-evm.itb"; symlink = "sysfw.itb"; + insert-template = <&itb_unsigned_template>; fit { - description = "SYSFW and Config fragments"; - #address-cells = <1>; images { sysfw.bin { - description = "sysfw"; - type = "firmware"; - arch = "arm"; - compression = "none"; blob-ext { filename = "sysfw.bin_gp"; }; }; - board-cfg.bin { - description = "board-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - blob-ext { - filename = "board-cfg.bin"; - }; - }; - pm-cfg.bin { - description = "pm-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - blob-ext { - filename = "pm-cfg.bin"; - }; - }; - rm-cfg.bin { - description = "rm-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - blob-ext { - filename = "rm-cfg.bin"; - }; - }; - sec-cfg.bin { - description = "sec-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - blob-ext { - filename = "sec-cfg.bin"; - }; - }; }; }; }; @@ -206,86 +95,22 @@ #ifdef CONFIG_TARGET_AM654_A53_EVM -#define SPL_NODTB "spl/u-boot-spl-nodtb.bin" #define SPL_AM654_EVM_DTB "spl/dts/k3-am654-base-board.dtb" - -#define UBOOT_NODTB "u-boot-nodtb.bin" #define AM654_EVM_DTB "u-boot.dtb" &binman { ti-spl { - filename = "tispl.bin"; - pad-byte = <0xff>; + insert-template = <&ti_spl_template>; fit { - description = "Configuration to load ATF and SPL"; - #address-cells = <1>; - images { - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - ti-secure { - content = <&atf>; - keyfile = "custMpk.pem"; - }; - atf: atf-bl31 { - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - ti-secure { - content = <&tee>; - keyfile = "custMpk.pem"; - }; - tee: tee-os { - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; blob-ext { filename = "/dev/null"; }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - ti-secure { - content = <&u_boot_spl_nodtb>; - keyfile = "custMpk.pem"; - - }; - u_boot_spl_nodtb: blob-ext { - filename = SPL_NODTB; - }; - }; - fdt-0 { description = "k3-am654-base-board"; type = "flat_dt"; @@ -317,29 +142,12 @@ &binman { u-boot { - filename = "u-boot.img"; - pad-byte = <0xff>; + insert-template = <&u_boot_template>; fit { - description = "FIT image with multiple configurations"; - images { uboot { - description = "U-Boot for AM65 board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - ti-secure { - content = <&u_boot_nodtb>; - keyfile = "custMpk.pem"; - }; - u_boot_nodtb: u-boot-nodtb { - }; - hash { - algo = "crc32"; - }; + description = "U-Boot for AM65 Board"; }; fdt-0 { @@ -378,67 +186,16 @@ &binman { ti-spl_unsigned { - filename = "tispl.bin_unsigned"; - pad-byte = <0xff>; + insert-template = <&ti_spl_unsigned_template>; fit { - description = "Configuration to load ATF and SPL"; - #address-cells = <1>; - images { - - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - atf-bl31 { - filename = "bl31.bin"; - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - tee-os { - filename = "tee-raw.bin"; - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; blob-ext { filename = "/dev/null"; }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - blob-ext { - filename = SPL_NODTB; - }; - }; - fdt-0 { description = "k3-j721e-common-proc-board"; type = "flat_dt"; @@ -466,26 +223,12 @@ &binman { u-boot_unsigned { - filename = "u-boot.img_unsigned"; - pad-byte = <0xff>; + insert-template = <&u_boot_unsigned_template>; fit { - description = "FIT image with multiple configurations"; - images { uboot { - description = "U-Boot for AM65 board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - blob { - filename = UBOOT_NODTB; - }; - hash { - algo = "crc32"; - }; + description = "U-Boot for AM65 Board"; }; fdt-0 { diff --git a/arch/arm/dts/k3-j7200-binman.dtsi b/arch/arm/dts/k3-j7200-binman.dtsi index 14f7dea65e..10c9d6cba7 100644 --- a/arch/arm/dts/k3-j7200-binman.dtsi +++ b/arch/arm/dts/k3-j7200-binman.dtsi @@ -180,10 +180,7 @@ #ifdef CONFIG_TARGET_J7200_A72_EVM -#define SPL_NODTB "spl/u-boot-spl-nodtb.bin" #define SPL_J7200_EVM_DTB "spl/dts/k3-j7200-common-proc-board.dtb" - -#define UBOOT_NODTB "u-boot-nodtb.bin" #define J7200_EVM_DTB "u-boot.dtb" &binman { @@ -194,82 +191,20 @@ }; }; ti-spl { - filename = "tispl.bin"; - pad-byte = <0xff>; + insert-template = <&ti_spl_template>; fit { - description = "Configuration to load ATF and SPL"; - #address-cells = <1>; - images { - - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - ti-secure { - content = <&atf>; - keyfile = "custMpk.pem"; - }; - atf: atf-bl31 { - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - ti-secure { - content = <&tee>; - keyfile = "custMpk.pem"; - }; - tee: tee-os { - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; ti-secure { content = <&dm>; keyfile = "custMpk.pem"; }; - dm: blob-ext { filename = "ti-dm.bin"; }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - ti-secure { - content = <&u_boot_spl_nodtb>; - keyfile = "custMpk.pem"; - }; - u_boot_spl_nodtb: blob-ext { - filename = SPL_NODTB; - }; - }; - fdt-0 { description = "k3-j7200-common-proc-board"; type = "flat_dt"; @@ -302,29 +237,12 @@ &binman { u-boot { - filename = "u-boot.img"; - pad-byte = <0xff>; + insert-template = <&u_boot_template>; fit { - description = "FIT image with multiple configurations"; - images { uboot { - description = "U-Boot for J7200 board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - ti-secure { - content = <&u_boot_nodtb>; - keyfile = "custMpk.pem"; - }; - u_boot_nodtb: u-boot-nodtb { - }; - hash { - algo = "crc32"; - }; + description = "U-Boot for J7200 Board"; }; fdt-0 { @@ -362,67 +280,16 @@ &binman { ti-spl_unsigned { - filename = "tispl.bin_unsigned"; - pad-byte = <0xff>; + insert-template = <&ti_spl_unsigned_template>; fit { - description = "Configuration to load ATF and SPL"; - #address-cells = <1>; - images { - - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - atf-bl31 { - filename = "bl31.bin"; - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - tee-os { - filename = "tee-raw.bin"; - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; blob-ext { filename = "ti-dm.bin"; }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - blob { - filename = SPL_NODTB; - }; - }; - fdt-1 { description = "k3-j7200-common-proc-board"; type = "flat_dt"; @@ -450,26 +317,12 @@ &binman { u-boot_unsigned { - filename = "u-boot.img_unsigned"; - pad-byte = <0xff>; + insert-template = <&u_boot_unsigned_template>; fit { - description = "FIT image with multiple configurations"; - images { uboot { - description = "U-Boot for J7200 board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - blob { - filename = UBOOT_NODTB; - }; - hash { - algo = "crc32"; - }; + description = "U-Boot for J7200 Board"; }; fdt-1 { diff --git a/arch/arm/dts/k3-j721e-binman.dtsi b/arch/arm/dts/k3-j721e-binman.dtsi index 4f566c21a9..5ddb474e3a 100644 --- a/arch/arm/dts/k3-j721e-binman.dtsi +++ b/arch/arm/dts/k3-j721e-binman.dtsi @@ -42,78 +42,7 @@ }; itb { filename = "sysfw-j721e_sr1_1-hs-evm.itb"; - fit { - description = "SYSFW and Config fragments"; - #address-cells = <1>; - images { - sysfw.bin { - description = "sysfw"; - type = "firmware"; - arch = "arm"; - compression = "none"; - blob-ext { - filename = "sysfw.bin"; - }; - }; - board-cfg.bin { - description = "board-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - ti-secure { - content = <&board_cfg>; - keyfile = "custMpk.pem"; - }; - board_cfg: board-cfg { - filename = "board-cfg.bin"; - type = "blob-ext"; - }; - - }; - pm-cfg.bin { - description = "pm-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - ti-secure { - content = <&pm_cfg>; - keyfile = "custMpk.pem"; - }; - pm_cfg: pm-cfg { - filename = "pm-cfg.bin"; - type = "blob-ext"; - }; - }; - rm-cfg.bin { - description = "rm-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - ti-secure { - content = <&rm_cfg>; - keyfile = "custMpk.pem"; - }; - rm_cfg: rm-cfg { - filename = "rm-cfg.bin"; - type = "blob-ext"; - }; - }; - sec-cfg.bin { - description = "sec-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - ti-secure { - content = <&sec_cfg>; - keyfile = "custMpk.pem"; - }; - sec_cfg: sec-cfg { - filename = "sec-cfg.bin"; - type = "blob-ext"; - }; - }; - }; - }; + insert-template = <&itb_template>; }; }; @@ -145,62 +74,7 @@ }; itb_fs { filename = "sysfw-j721e_sr2-hs-fs-evm.itb"; - fit { - description = "SYSFW and Config fragments"; - #address-cells = <1>; - images { - sysfw.bin { - description = "sysfw"; - type = "firmware"; - arch = "arm"; - compression = "none"; - blob-ext { - filename = "sysfw.bin_fs"; - }; - }; - board-cfg.bin { - description = "board-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - board-cfg { - filename = "board-cfg.bin"; - type = "blob-ext"; - }; - - }; - pm-cfg.bin { - description = "pm-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - pm-cfg { - filename = "pm-cfg.bin"; - type = "blob-ext"; - }; - }; - rm-cfg.bin { - description = "rm-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - rm-cfg { - filename = "rm-cfg.bin"; - type = "blob-ext"; - }; - }; - sec-cfg.bin { - description = "sec-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - sec-cfg { - filename = "sec-cfg.bin"; - type = "blob-ext"; - }; - }; - }; - }; + insert-template = <&itb_unsigned_template>; }; }; @@ -237,55 +111,15 @@ itb_gp { filename = "sysfw-j721e-gp-evm.itb"; symlink = "sysfw.itb"; + insert-template = <&itb_unsigned_template>; + fit { - description = "SYSFW and Config fragments"; - #address-cells = <1>; images { sysfw.bin { - description = "sysfw"; - type = "firmware"; - arch = "arm"; - compression = "none"; blob-ext { filename = "sysfw.bin_gp"; }; }; - board-cfg.bin { - description = "board-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - blob-ext { - filename = "board-cfg.bin"; - }; - }; - pm-cfg.bin { - description = "pm-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - blob-ext { - filename = "pm-cfg.bin"; - }; - }; - rm-cfg.bin { - description = "rm-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - blob-ext { - filename = "rm-cfg.bin"; - }; - }; - sec-cfg.bin { - description = "sec-cfg"; - type = "firmware"; - arch = "arm"; - compression = "none"; - blob-ext { - filename = "sec-cfg.bin"; - }; - }; }; }; }; @@ -294,11 +128,9 @@ #ifdef CONFIG_TARGET_J721E_A72_EVM -#define SPL_NODTB "spl/u-boot-spl-nodtb.bin" #define SPL_J721E_EVM_DTB "spl/dts/k3-j721e-common-proc-board.dtb" #define SPL_J721E_SK_DTB "spl/dts/k3-j721e-sk.dtb" -#define UBOOT_NODTB "u-boot-nodtb.bin" #define J721E_EVM_DTB "u-boot.dtb" #define J721E_SK_DTB "arch/arm/dts/k3-j721e-sk.dtb" @@ -310,55 +142,11 @@ }; }; ti-spl { - filename = "tispl.bin"; - pad-byte = <0xff>; + insert-template = <&ti_spl_template>; fit { - description = "Configuration to load ATF and SPL"; - #address-cells = <1>; - images { - - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - ti-secure { - content = <&atf>; - keyfile = "custMpk.pem"; - }; - atf: atf-bl31 { - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - ti-secure { - content = <&tee>; - keyfile = "custMpk.pem"; - }; - tee: tee-os { - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; ti-secure { content = <&dm>; keyfile = "custMpk.pem"; @@ -368,24 +156,6 @@ }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - ti-secure { - content = <&u_boot_spl_nodtb>; - keyfile = "custMpk.pem"; - - }; - u_boot_spl_nodtb: blob-ext { - filename = SPL_NODTB; - }; - }; - fdt-0 { description = "k3-j721e-common-proc-board"; type = "flat_dt"; @@ -439,29 +209,12 @@ &binman { u-boot { - filename = "u-boot.img"; - pad-byte = <0xff>; - + insert-template = <&u_boot_template>; fit { - description = "FIT image with multiple configurations"; images { uboot { - description = "U-Boot for j721e board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - ti-secure { - content = <&u_boot_nodtb>; - keyfile = "custMpk.pem"; - }; - u_boot_nodtb: u-boot-nodtb { - }; - hash { - algo = "crc32"; - }; + description = "U-Boot for J721E Board"; }; fdt-0 { @@ -524,67 +277,16 @@ &binman { ti-spl_unsigned { - filename = "tispl.bin_unsigned"; - pad-byte = <0xff>; + insert-template = <&ti_spl_unsigned_template>; fit { - description = "Configuration to load ATF and SPL"; - #address-cells = <1>; - images { - - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - atf-bl31 { - filename = "bl31.bin"; - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - tee-os { - filename = "tee-raw.bin"; - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; blob-ext { filename = "ti-dm.bin"; }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - blob-ext { - filename = SPL_NODTB; - }; - }; - fdt-0 { description = "k3-j721e-common-proc-board"; type = "flat_dt"; @@ -629,26 +331,12 @@ &binman { u-boot_unsigned { - filename = "u-boot.img_unsigned"; - pad-byte = <0xff>; + insert-template = <&u_boot_unsigned_template>; fit { - description = "FIT image with multiple configurations"; - images { uboot { - description = "U-Boot for j721e board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - blob { - filename = UBOOT_NODTB; - }; - hash { - algo = "crc32"; - }; + description = "U-Boot for J721E Board"; }; fdt-0 { diff --git a/arch/arm/dts/k3-j721s2-binman.dtsi b/arch/arm/dts/k3-j721s2-binman.dtsi index 5bca4e94ec..3922007b3b 100644 --- a/arch/arm/dts/k3-j721s2-binman.dtsi +++ b/arch/arm/dts/k3-j721s2-binman.dtsi @@ -141,11 +141,9 @@ #ifdef CONFIG_TARGET_J721S2_A72_EVM -#define SPL_NODTB "spl/u-boot-spl-nodtb.bin" #define SPL_J721S2_EVM_DTB "spl/dts/k3-j721s2-common-proc-board.dtb" #define SPL_AM68_SK_DTB "spl/dts/k3-am68-sk-base-board.dtb" -#define UBOOT_NODTB "u-boot-nodtb.bin" #define J721S2_EVM_DTB "u-boot.dtb" #define AM68_SK_DTB "arch/arm/dts/k3-am68-sk-base-board.dtb" @@ -157,55 +155,11 @@ }; }; ti-spl { - filename = "tispl.bin"; - pad-byte = <0xff>; + insert-template = <&ti_spl_template>; fit { - description = "Configuration to load ATF and SPL"; - #address-cells = <1>; - images { - - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - ti-secure { - content = <&atf>; - keyfile = "custMpk.pem"; - }; - atf: atf-bl31 { - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - ti-secure { - content = <&tee>; - keyfile = "custMpk.pem"; - }; - tee: tee-os { - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; ti-secure { content = <&dm>; keyfile = "custMpk.pem"; @@ -215,23 +169,6 @@ }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - ti-secure { - content = <&u_boot_spl_nodtb>; - keyfile = "custMpk.pem"; - }; - u_boot_spl_nodtb: blob-ext { - filename = SPL_NODTB; - }; - }; - fdt-0 { description = "k3-j721s2-common-proc-board"; type = "flat_dt"; @@ -285,29 +222,12 @@ &binman { u-boot { - filename = "u-boot.img"; - pad-byte = <0xff>; + insert-template = <&u_boot_template>; fit { - description = "FIT image with multiple configurations"; - images { uboot { - description = "U-Boot for J721S2 board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - ti-secure { - content = <&u_boot_nodtb>; - keyfile = "custMpk.pem"; - }; - u_boot_nodtb: u-boot-nodtb { - }; - hash { - algo = "crc32"; - }; + description = "U-Boot for J721S2 Board"; }; fdt-0 { @@ -371,67 +291,16 @@ &binman { ti-spl_unsigned { - filename = "tispl.bin_unsigned"; - pad-byte = <0xff>; + insert-template = <&ti_spl_unsigned_template>; fit { - description = "Configuration to load ATF and SPL"; - #address-cells = <1>; - images { - - atf { - description = "ARM Trusted Firmware"; - type = "firmware"; - arch = "arm64"; - compression = "none"; - os = "arm-trusted-firmware"; - load = ; - entry = ; - atf-bl31 { - filename = "bl31.bin"; - }; - }; - - tee { - description = "OP-TEE"; - type = "tee"; - arch = "arm64"; - compression = "none"; - os = "tee"; - load = <0x9e800000>; - entry = <0x9e800000>; - tee-os { - filename = "tee-raw.bin"; - }; - }; - dm { - description = "DM binary"; - type = "firmware"; - arch = "arm32"; - compression = "none"; - os = "DM"; - load = <0x89000000>; - entry = <0x89000000>; blob-ext { filename = "ti-dm.bin"; }; }; - spl { - description = "SPL (64-bit)"; - type = "standalone"; - os = "U-Boot"; - arch = "arm64"; - compression = "none"; - load = ; - entry = ; - blob { - filename = "spl/u-boot-spl-nodtb.bin"; - }; - }; - fdt-0 { description = "k3-j721s2-common-proc-board"; type = "flat_dt"; @@ -475,26 +344,12 @@ &binman { u-boot_unsigned { - filename = "u-boot.img_unsigned"; - pad-byte = <0xff>; + insert-template = <&u_boot_unsigned_template>; fit { - description = "FIT image with multiple configurations"; - images { uboot { - description = "U-Boot for J721S2 board"; - type = "firmware"; - os = "u-boot"; - arch = "arm"; - compression = "none"; - load = ; - blob { - filename = UBOOT_NODTB; - }; - hash { - algo = "crc32"; - }; + description = "U-Boot for J721S2 Board"; }; fdt-0 { -- 2.39.5