From 433eb4affc497ed9e88e1e758bc3e1f21c6fda4d Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 17 Aug 2021 17:59:40 -0400 Subject: [PATCH] siemens: Move CONFIG_SYS_I2C_EEPROM_ADDR usage out of CONFIG namespace The instances of CONFIG_SYS_I2C_EEPROM_ADDR on these platforms doesn't match up with the rest of the EERPOM related defines in U-Boot. Move these out of the CONFIG namespace rather than make complex Kconfig logic. Cc: Samuel Egli Cc: Anatolij Gustschin Cc: Heiko Schocher Signed-off-by: Tom Rini Reviewed-by: Heiko Schocher Reviewed-by: Anatolij Gustschin --- board/siemens/common/board.c | 3 ++- board/siemens/draco/board.c | 12 ++++++++---- include/configs/draco.h | 4 ---- 3 files changed, 10 insertions(+), 9 deletions(-) diff --git a/board/siemens/common/board.c b/board/siemens/common/board.c index 1bdf404ac3..56283660d3 100644 --- a/board/siemens/common/board.c +++ b/board/siemens/common/board.c @@ -70,6 +70,7 @@ void sdram_init(void) #endif /* #ifdef CONFIG_SPL_BUILD */ #ifndef CONFIG_SPL_BUILD +#define FACTORYSET_EEPROM_ADDR 0x50 /* * Basic board specific setup. Pinmux has been handled already. */ @@ -87,7 +88,7 @@ int board_init(void) gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; #ifdef CONFIG_FACTORYSET - factoryset_read_eeprom(CONFIG_SYS_I2C_EEPROM_ADDR); + factoryset_read_eeprom(FACTORYSET_EEPROM_ADDR); #endif gpmc_init(); diff --git a/board/siemens/draco/board.c b/board/siemens/draco/board.c index af35bc188e..f898bba4b0 100644 --- a/board/siemens/draco/board.c +++ b/board/siemens/draco/board.c @@ -132,12 +132,16 @@ struct am335x_nand_geometry { u8 nand_bus; }; +#define EEPROM_ADDR 0x50 +#define EEPROM_ADDR_DDR3 0x90 +#define EEPROM_ADDR_CHIP 0x120 + static int draco_read_nand_geometry(void) { struct am335x_nand_geometry geo; /* Read NAND geometry */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0x80, 2, + if (i2c_read(EEPROM_ADDR, 0x80, 2, (uchar *)&geo, sizeof(struct am335x_nand_geometry))) { printf("Could not read the NAND geomtery; something fundamentally wrong on the I2C bus.\n"); return -EIO; @@ -160,20 +164,20 @@ static int draco_read_nand_geometry(void) static int read_eeprom(void) { /* Check if baseboard eeprom is available */ - if (i2c_probe(CONFIG_SYS_I2C_EEPROM_ADDR)) { + if (i2c_probe(EEPROM_ADDR)) { printf("Could not probe the EEPROM; something fundamentally wrong on the I2C bus.\n"); return 1; } #ifdef CONFIG_SPL_BUILD /* Read Siemens eeprom data (DDR3) */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_ADDR_DDR3, 2, + if (i2c_read(EEPROM_ADDR, EEPROM_ADDR_DDR3, 2, (uchar *)&settings.ddr3, sizeof(struct ddr3_data))) { printf("Could not read the EEPROM; something fundamentally wrong on the I2C bus.\nUse default DDR3 timings\n"); set_default_ddr3_timings(); } /* Read Siemens eeprom data (CHIP) */ - if (i2c_read(CONFIG_SYS_I2C_EEPROM_ADDR, EEPROM_ADDR_CHIP, 2, + if (i2c_read(EEPROM_ADDR, EEPROM_ADDR_CHIP, 2, (uchar *)&settings.chip, sizeof(settings.chip))) printf("Could not read chip settings\n"); diff --git a/include/configs/draco.h b/include/configs/draco.h index 396eb7ded5..7c1f071d99 100644 --- a/include/configs/draco.h +++ b/include/configs/draco.h @@ -32,10 +32,6 @@ /* I2C Configuration */ #define CONFIG_SYS_I2C_SPEED 100000 -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 -#define EEPROM_ADDR_DDR3 0x90 -#define EEPROM_ADDR_CHIP 0x120 - #define CONFIG_FACTORYSET /* Define own nand partitions */ -- 2.39.5