From 3ead661633293413e9af6d1e20c0a1a362d08ee8 Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Tue, 7 Nov 2023 12:41:01 +0000 Subject: [PATCH] clk/qcom: handle resets and clocks in one device Qualcomm's clock controller blocks actually do much more than it says on the tin.. They provide clocks, resets and power domains. Currently, U-Boot requires one to spawn 2 separate devices for controlling clocks and resets, both spanning the same register space. Refactor the code to make it work with just a single DT node, making it compatible with upstream Linux bindings and dropping the dedicated reset driver in favour of including it in the clock driver. Heavily inspired by Renesas code for a similar hw block. [caleb: moved drivers to clk/qcom, added reset driver and adjusted bind logic. Imported qcom,gcc-ipq4019.h from Linux] Signed-off-by: Konrad Dybcio Reviewed-by: Sumit Garg Signed-off-by: Caleb Connolly --- arch/arm/Kconfig | 1 + arch/arm/dts/qcom-ipq4019.dtsi | 14 +- arch/arm/dts/qcs404-evb.dts | 19 +- drivers/clk/qcom/clock-apq8016.c | 17 ++ drivers/clk/qcom/clock-apq8096.c | 16 ++ drivers/clk/qcom/clock-ipq4019.c | 96 ++++++++- drivers/clk/qcom/clock-qcom.c | 119 +++++++++-- drivers/clk/qcom/clock-qcom.h | 20 +- drivers/clk/qcom/clock-qcs404.c | 50 ++++- drivers/clk/qcom/clock-sdm845.c | 42 ++++ drivers/reset/Kconfig | 7 - drivers/reset/Makefile | 1 - drivers/reset/reset-qcom.c | 195 ------------------ ...{qcom,ipq4019-gcc.h => qcom,gcc-ipq4019.h} | 73 +++++++ .../dt-bindings/reset/qcom,ipq4019-reset.h | 92 --------- 15 files changed, 421 insertions(+), 341 deletions(-) delete mode 100644 drivers/reset/reset-qcom.c rename include/dt-bindings/clock/{qcom,ipq4019-gcc.h => qcom,gcc-ipq4019.h} (58%) delete mode 100644 include/dt-bindings/reset/qcom,ipq4019-reset.h diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 294ab9d0a3..2eef266e1d 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1077,6 +1077,7 @@ config ARCH_SNAPDRAGON select DM select DM_GPIO select DM_SERIAL + select DM_RESET select GPIO_EXTRA_HEADER select MSM_SMEM select OF_CONTROL diff --git a/arch/arm/dts/qcom-ipq4019.dtsi b/arch/arm/dts/qcom-ipq4019.dtsi index 0850ae56e9..f9489e42ea 100644 --- a/arch/arm/dts/qcom-ipq4019.dtsi +++ b/arch/arm/dts/qcom-ipq4019.dtsi @@ -66,14 +66,6 @@ status = "disabled"; }; - reset: gcc-reset@1800000 { - compatible = "qcom,gcc-reset-ipq4019"; - reg = <0x1800000 0x60000>; - #clock-cells = <1>; - #reset-cells = <1>; - bootph-all; - }; - soc_gpios: pinctrl@1000000 { compatible = "qcom,ipq4019-pinctrl"; reg = <0x1000000 0x300000>; @@ -136,7 +128,7 @@ #phy-cells = <0>; reg = <0x9a000 0x800>; reg-names = "phy_base"; - resets = <&reset USB3_UNIPHY_PHY_ARES>; + resets = <&gcc USB3_UNIPHY_PHY_ARES>; reset-names = "por_rst"; status = "disabled"; }; @@ -146,7 +138,7 @@ #phy-cells = <0>; reg = <0xa6000 0x40>; reg-names = "phy_base"; - resets = <&reset USB3_HSPHY_POR_ARES>, <&reset USB3_HSPHY_S_ARES>; + resets = <&gcc USB3_HSPHY_POR_ARES>, <&gcc USB3_HSPHY_S_ARES>; reset-names = "por_rst", "srif_rst"; status = "disabled"; }; @@ -179,7 +171,7 @@ #phy-cells = <0>; reg = <0xa8000 0x40>; reg-names = "phy_base"; - resets = <&reset USB2_HSPHY_POR_ARES>, <&reset USB2_HSPHY_S_ARES>; + resets = <&gcc USB2_HSPHY_POR_ARES>, <&gcc USB2_HSPHY_S_ARES>; reset-names = "por_rst", "srif_rst"; status = "disabled"; }; diff --git a/arch/arm/dts/qcs404-evb.dts b/arch/arm/dts/qcs404-evb.dts index 8d7893c116..84224a8a3d 100644 --- a/arch/arm/dts/qcs404-evb.dts +++ b/arch/arm/dts/qcs404-evb.dts @@ -208,11 +208,6 @@ #address-cells = <0x1>; #size-cells = <0x0>; #clock-cells = <1>; - }; - - reset: gcc-reset@1800000 { - compatible = "qcom,gcc-reset-qcs404"; - reg = <0x1800000 0x80000>; #reset-cells = <1>; }; @@ -245,8 +240,8 @@ clocks = <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, <&gcc GCC_USB3_PHY_PIPE_CLK>; clock-names = "ahb", "pipe"; - resets = <&reset GCC_USB3_PHY_BCR>, - <&reset GCC_USB3PHY_PHY_BCR>; + resets = <&gcc GCC_USB3_PHY_BCR>, + <&gcc GCC_USB3PHY_PHY_BCR>; reset-names = "com", "phy"; }; @@ -257,8 +252,8 @@ clocks = <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; clock-names = "ahb", "sleep"; - resets = <&reset GCC_USB_HS_PHY_CFG_AHB_BCR>, - <&reset GCC_USB2A_PHY_BCR>; + resets = <&gcc GCC_USB_HS_PHY_CFG_AHB_BCR>, + <&gcc GCC_USB2A_PHY_BCR>; reset-names = "phy", "por"; }; @@ -269,8 +264,8 @@ clocks = <&gcc GCC_USB_HS_PHY_CFG_AHB_CLK>, <&gcc GCC_USB2A_PHY_SLEEP_CLK>; clock-names = "ahb", "sleep"; - resets = <&reset GCC_QUSB2_PHY_BCR>, - <&reset GCC_USB2_HS_PHY_ONLY_BCR>; + resets = <&gcc GCC_QUSB2_PHY_BCR>, + <&gcc GCC_USB2_HS_PHY_ONLY_BCR>; reset-names = "phy", "por"; }; @@ -335,7 +330,7 @@ <&gcc GCC_ETH_PTP_CLK>, <&gcc GCC_ETH_RGMII_CLK>; - resets = <&reset GCC_EMAC_BCR>; + resets = <&gcc GCC_EMAC_BCR>; reset-names = "emac"; snps,tso; diff --git a/drivers/clk/qcom/clock-apq8016.c b/drivers/clk/qcom/clock-apq8016.c index 90f2a93d9e..3bddbd2759 100644 --- a/drivers/clk/qcom/clock-apq8016.c +++ b/drivers/clk/qcom/clock-apq8016.c @@ -13,6 +13,7 @@ #include #include #include + #include "clock-qcom.h" /* GPLL0 clock control registers */ @@ -116,3 +117,19 @@ int msm_enable(struct clk *clk) { return 0; } + +static const struct udevice_id gcc_apq8016_of_match[] = { + { + .compatible = "qcom,gcc-apq8016", + /* TODO: add reset map */ + }, + { } +}; + +U_BOOT_DRIVER(gcc_apq8016) = { + .name = "gcc_apq8016", + .id = UCLASS_NOP, + .of_match = gcc_apq8016_of_match, + .bind = qcom_cc_bind, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/clk/qcom/clock-apq8096.c b/drivers/clk/qcom/clock-apq8096.c index d5388c69ae..64b8cdf4c5 100644 --- a/drivers/clk/qcom/clock-apq8096.c +++ b/drivers/clk/qcom/clock-apq8096.c @@ -99,3 +99,19 @@ int msm_enable(struct clk *clk) { return 0; } + +static const struct udevice_id gcc_apq8096_of_match[] = { + { + .compatible = "qcom,gcc-apq8096", + /* TODO: add reset map */ + }, + { } +}; + +U_BOOT_DRIVER(gcc_apq8096) = { + .name = "gcc_apq8096", + .id = UCLASS_NOP, + .of_match = gcc_apq8096_of_match, + .bind = qcom_cc_bind, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/clk/qcom/clock-ipq4019.c b/drivers/clk/qcom/clock-ipq4019.c index 04c99964df..db869f8742 100644 --- a/drivers/clk/qcom/clock-ipq4019.c +++ b/drivers/clk/qcom/clock-ipq4019.c @@ -12,7 +12,7 @@ #include #include #include -#include +#include #include "clock-qcom.h" @@ -49,3 +49,97 @@ int msm_enable(struct clk *clk) } } +static const struct qcom_reset_map gcc_ipq4019_resets[] = { + [WIFI0_CPU_INIT_RESET] = { 0x1f008, 5 }, + [WIFI0_RADIO_SRIF_RESET] = { 0x1f008, 4 }, + [WIFI0_RADIO_WARM_RESET] = { 0x1f008, 3 }, + [WIFI0_RADIO_COLD_RESET] = { 0x1f008, 2 }, + [WIFI0_CORE_WARM_RESET] = { 0x1f008, 1 }, + [WIFI0_CORE_COLD_RESET] = { 0x1f008, 0 }, + [WIFI1_CPU_INIT_RESET] = { 0x20008, 5 }, + [WIFI1_RADIO_SRIF_RESET] = { 0x20008, 4 }, + [WIFI1_RADIO_WARM_RESET] = { 0x20008, 3 }, + [WIFI1_RADIO_COLD_RESET] = { 0x20008, 2 }, + [WIFI1_CORE_WARM_RESET] = { 0x20008, 1 }, + [WIFI1_CORE_COLD_RESET] = { 0x20008, 0 }, + [USB3_UNIPHY_PHY_ARES] = { 0x1e038, 5 }, + [USB3_HSPHY_POR_ARES] = { 0x1e038, 4 }, + [USB3_HSPHY_S_ARES] = { 0x1e038, 2 }, + [USB2_HSPHY_POR_ARES] = { 0x1e01c, 4 }, + [USB2_HSPHY_S_ARES] = { 0x1e01c, 2 }, + [PCIE_PHY_AHB_ARES] = { 0x1d010, 11 }, + [PCIE_AHB_ARES] = { 0x1d010, 10 }, + [PCIE_PWR_ARES] = { 0x1d010, 9 }, + [PCIE_PIPE_STICKY_ARES] = { 0x1d010, 8 }, + [PCIE_AXI_M_STICKY_ARES] = { 0x1d010, 7 }, + [PCIE_PHY_ARES] = { 0x1d010, 6 }, + [PCIE_PARF_XPU_ARES] = { 0x1d010, 5 }, + [PCIE_AXI_S_XPU_ARES] = { 0x1d010, 4 }, + [PCIE_AXI_M_VMIDMT_ARES] = { 0x1d010, 3 }, + [PCIE_PIPE_ARES] = { 0x1d010, 2 }, + [PCIE_AXI_S_ARES] = { 0x1d010, 1 }, + [PCIE_AXI_M_ARES] = { 0x1d010, 0 }, + [ESS_RESET] = { 0x12008, 0}, + [GCC_BLSP1_BCR] = {0x01000, 0}, + [GCC_BLSP1_QUP1_BCR] = {0x02000, 0}, + [GCC_BLSP1_UART1_BCR] = {0x02038, 0}, + [GCC_BLSP1_QUP2_BCR] = {0x03008, 0}, + [GCC_BLSP1_UART2_BCR] = {0x03028, 0}, + [GCC_BIMC_BCR] = {0x04000, 0}, + [GCC_TLMM_BCR] = {0x05000, 0}, + [GCC_IMEM_BCR] = {0x0E000, 0}, + [GCC_ESS_BCR] = {0x12008, 0}, + [GCC_PRNG_BCR] = {0x13000, 0}, + [GCC_BOOT_ROM_BCR] = {0x13008, 0}, + [GCC_CRYPTO_BCR] = {0x16000, 0}, + [GCC_SDCC1_BCR] = {0x18000, 0}, + [GCC_SEC_CTRL_BCR] = {0x1A000, 0}, + [GCC_AUDIO_BCR] = {0x1B008, 0}, + [GCC_QPIC_BCR] = {0x1C000, 0}, + [GCC_PCIE_BCR] = {0x1D000, 0}, + [GCC_USB2_BCR] = {0x1E008, 0}, + [GCC_USB2_PHY_BCR] = {0x1E018, 0}, + [GCC_USB3_BCR] = {0x1E024, 0}, + [GCC_USB3_PHY_BCR] = {0x1E034, 0}, + [GCC_SYSTEM_NOC_BCR] = {0x21000, 0}, + [GCC_PCNOC_BCR] = {0x2102C, 0}, + [GCC_DCD_BCR] = {0x21038, 0}, + [GCC_SNOC_BUS_TIMEOUT0_BCR] = {0x21064, 0}, + [GCC_SNOC_BUS_TIMEOUT1_BCR] = {0x2106C, 0}, + [GCC_SNOC_BUS_TIMEOUT2_BCR] = {0x21074, 0}, + [GCC_SNOC_BUS_TIMEOUT3_BCR] = {0x2107C, 0}, + [GCC_PCNOC_BUS_TIMEOUT0_BCR] = {0x21084, 0}, + [GCC_PCNOC_BUS_TIMEOUT1_BCR] = {0x2108C, 0}, + [GCC_PCNOC_BUS_TIMEOUT2_BCR] = {0x21094, 0}, + [GCC_PCNOC_BUS_TIMEOUT3_BCR] = {0x2109C, 0}, + [GCC_PCNOC_BUS_TIMEOUT4_BCR] = {0x210A4, 0}, + [GCC_PCNOC_BUS_TIMEOUT5_BCR] = {0x210AC, 0}, + [GCC_PCNOC_BUS_TIMEOUT6_BCR] = {0x210B4, 0}, + [GCC_PCNOC_BUS_TIMEOUT7_BCR] = {0x210BC, 0}, + [GCC_PCNOC_BUS_TIMEOUT8_BCR] = {0x210C4, 0}, + [GCC_PCNOC_BUS_TIMEOUT9_BCR] = {0x210CC, 0}, + [GCC_TCSR_BCR] = {0x22000, 0}, + [GCC_MPM_BCR] = {0x24000, 0}, + [GCC_SPDM_BCR] = {0x25000, 0}, +}; + +static struct msm_clk_data ipq4019_data = { + .resets = gcc_ipq4019_resets, + .num_resets = ARRAY_SIZE(gcc_ipq4019_resets), +}; + +static const struct udevice_id gcc_ipq4019_of_match[] = { + { + .compatible = "qcom,gcc-ipq4019", + .data = (ulong)&ipq4019_data, + }, + { } +}; + +U_BOOT_DRIVER(gcc_ipq4019) = { + .name = "gcc_ipq4019", + .id = UCLASS_NOP, + .of_match = gcc_ipq4019_of_match, + .bind = qcom_cc_bind, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/clk/qcom/clock-qcom.c b/drivers/clk/qcom/clock-qcom.c index 5914616fba..a661837e4e 100644 --- a/drivers/clk/qcom/clock-qcom.c +++ b/drivers/clk/qcom/clock-qcom.c @@ -1,8 +1,13 @@ -// SPDX-License-Identifier: BSD-3-Clause +// SPDX-License-Identifier: BSD-3-Clause AND GPL-2.0 /* - * Clock drivers for Qualcomm APQ8016, APQ8096 + * Clock and reset drivers for Qualcomm platforms Global Clock + * Controller (GCC). * * (C) Copyright 2015 Mateusz Kulikowski + * (C) Copyright 2020 Sartura Ltd. (reset driver) + * Author: Robert Marko + * (C) Copyright 2022 Linaro Ltd. (reset driver) + * Author: Sumit Garg * * Based on Little Kernel driver, simplified */ @@ -10,9 +15,13 @@ #include #include #include +#include +#include #include #include #include +#include + #include "clock-qcom.h" /* CBCR register fields */ @@ -137,12 +146,15 @@ void clk_rcg_set_rate(phys_addr_t base, const struct bcr_regs *regs, int div, static int msm_clk_probe(struct udevice *dev) { + struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(dev); struct msm_clk_priv *priv = dev_get_priv(dev); priv->base = dev_read_addr(dev); if (priv->base == FDT_ADDR_T_NONE) return -EINVAL; + priv->data = data; + return 0; } @@ -161,22 +173,97 @@ static struct clk_ops msm_clk_ops = { .enable = msm_clk_enable, }; -static const struct udevice_id msm_clk_ids[] = { - { .compatible = "qcom,gcc-msm8916" }, - { .compatible = "qcom,gcc-apq8016" }, - { .compatible = "qcom,gcc-msm8996" }, - { .compatible = "qcom,gcc-apq8096" }, - { .compatible = "qcom,gcc-ipq4019" }, - { .compatible = "qcom,gcc-sdm845" }, - { .compatible = "qcom,gcc-qcs404" }, - { } -}; - -U_BOOT_DRIVER(clk_msm) = { - .name = "clk_msm", +U_BOOT_DRIVER(qcom_clk) = { + .name = "qcom_clk", .id = UCLASS_CLK, - .of_match = msm_clk_ids, .ops = &msm_clk_ops, .priv_auto = sizeof(struct msm_clk_priv), .probe = msm_clk_probe, }; + +int qcom_cc_bind(struct udevice *parent) +{ + struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(parent); + struct udevice *clkdev, *rstdev; + struct driver *drv; + int ret; + + /* Get a handle to the common clk handler */ + drv = lists_driver_lookup_name("qcom_clk"); + if (!drv) + return -ENOENT; + + /* Register the clock controller */ + ret = device_bind_with_driver_data(parent, drv, "qcom_clk", (ulong)data, + dev_ofnode(parent), &clkdev); + if (ret) + return ret; + + /* Bail out early if resets are not specified for this platform */ + if (!data->resets) + return ret; + + /* Get a handle to the common reset handler */ + drv = lists_driver_lookup_name("qcom_reset"); + if (!drv) + return -ENOENT; + + /* Register the reset controller */ + ret = device_bind_with_driver_data(parent, drv, "qcom_reset", (ulong)data, + dev_ofnode(parent), &rstdev); + if (ret) + device_unbind(clkdev); + + return ret; +} + +static int qcom_reset_set(struct reset_ctl *rst, bool assert) +{ + struct msm_clk_data *data = (struct msm_clk_data *)dev_get_driver_data(rst->dev); + void __iomem *base = dev_get_priv(rst->dev); + const struct qcom_reset_map *map; + u32 value; + + map = &data->resets[rst->id]; + + value = readl(base + map->reg); + + if (assert) + value |= BIT(map->bit); + else + value &= ~BIT(map->bit); + + writel(value, base + map->reg); + + return 0; +} + +static int qcom_reset_assert(struct reset_ctl *rst) +{ + return qcom_reset_set(rst, true); +} + +static int qcom_reset_deassert(struct reset_ctl *rst) +{ + return qcom_reset_set(rst, false); +} + +static const struct reset_ops qcom_reset_ops = { + .rst_assert = qcom_reset_assert, + .rst_deassert = qcom_reset_deassert, +}; + +static int qcom_reset_probe(struct udevice *dev) +{ + /* Set our priv pointer to the base address */ + dev_set_priv(dev, (void *)dev_read_addr(dev)); + + return 0; +} + +U_BOOT_DRIVER(qcom_reset) = { + .name = "qcom_reset", + .id = UCLASS_RESET, + .ops = &qcom_reset_ops, + .probe = qcom_reset_probe, +}; diff --git a/drivers/clk/qcom/clock-qcom.h b/drivers/clk/qcom/clock-qcom.h index c90bbefa58..a9f895c242 100644 --- a/drivers/clk/qcom/clock-qcom.h +++ b/drivers/clk/qcom/clock-qcom.h @@ -1,11 +1,9 @@ /* SPDX-License-Identifier: GPL-2.0+ */ /* - * Qualcomm APQ8016, APQ8096, SDM845 - * * (C) Copyright 2017 Jorge Ramirez-Ortiz */ -#ifndef _CLOCK_SNAPDRAGON_H -#define _CLOCK_SNAPDRAGON_H +#ifndef _CLOCK_QCOM_H +#define _CLOCK_QCOM_H #define CFG_CLK_SRC_CXO (0 << 8) #define CFG_CLK_SRC_GPLL0 (1 << 8) @@ -32,10 +30,22 @@ struct bcr_regs { uintptr_t D; }; +struct qcom_reset_map { + unsigned int reg; + u8 bit; +}; + +struct msm_clk_data { + const struct qcom_reset_map *resets; + unsigned long num_resets; +}; + struct msm_clk_priv { - phys_addr_t base; + phys_addr_t base; + struct msm_clk_data *data; }; +int qcom_cc_bind(struct udevice *parent); void clk_enable_gpll0(phys_addr_t base, const struct pll_vote_clk *gpll0); void clk_bcr_update(phys_addr_t apps_cmd_rgcr); void clk_enable_cbc(phys_addr_t cbcr); diff --git a/drivers/clk/qcom/clock-qcs404.c b/drivers/clk/qcom/clock-qcs404.c index 80218af73e..10ac3609be 100644 --- a/drivers/clk/qcom/clock-qcs404.c +++ b/drivers/clk/qcom/clock-qcs404.c @@ -11,9 +11,10 @@ #include #include #include +#include + #include "clock-qcom.h" -#include /* GPLL0 clock control registers */ #define GPLL0_STATUS_ACTIVE BIT(31) @@ -235,3 +236,50 @@ int msm_enable(struct clk *clk) return 0; } + +static const struct qcom_reset_map qcs404_gcc_resets[] = { + [GCC_GENI_IR_BCR] = { 0x0F000 }, + [GCC_CDSP_RESTART] = { 0x18000 }, + [GCC_USB_HS_BCR] = { 0x41000 }, + [GCC_USB2_HS_PHY_ONLY_BCR] = { 0x41034 }, + [GCC_QUSB2_PHY_BCR] = { 0x4103c }, + [GCC_USB_HS_PHY_CFG_AHB_BCR] = { 0x0000c, 1 }, + [GCC_USB2A_PHY_BCR] = { 0x0000c, 0 }, + [GCC_USB3_PHY_BCR] = { 0x39004 }, + [GCC_USB_30_BCR] = { 0x39000 }, + [GCC_USB3PHY_PHY_BCR] = { 0x39008 }, + [GCC_PCIE_0_BCR] = { 0x3e000 }, + [GCC_PCIE_0_PHY_BCR] = { 0x3e004 }, + [GCC_PCIE_0_LINK_DOWN_BCR] = { 0x3e038 }, + [GCC_PCIEPHY_0_PHY_BCR] = { 0x3e03c }, + [GCC_PCIE_0_AXI_MASTER_STICKY_ARES] = { 0x3e040, 6}, + [GCC_PCIE_0_AHB_ARES] = { 0x3e040, 5 }, + [GCC_PCIE_0_AXI_SLAVE_ARES] = { 0x3e040, 4 }, + [GCC_PCIE_0_AXI_MASTER_ARES] = { 0x3e040, 3 }, + [GCC_PCIE_0_CORE_STICKY_ARES] = { 0x3e040, 2 }, + [GCC_PCIE_0_SLEEP_ARES] = { 0x3e040, 1 }, + [GCC_PCIE_0_PIPE_ARES] = { 0x3e040, 0 }, + [GCC_EMAC_BCR] = { 0x4e000 }, + [GCC_WDSP_RESTART] = {0x19000}, +}; + +static const struct msm_clk_data qcs404_gcc_data = { + .resets = qcs404_gcc_resets, + .num_resets = ARRAY_SIZE(qcs404_gcc_resets), +}; + +static const struct udevice_id gcc_qcs404_of_match[] = { + { + .compatible = "qcom,gcc-qcs404", + .data = (ulong)&qcs404_gcc_data + }, + { } +}; + +U_BOOT_DRIVER(gcc_qcs404) = { + .name = "gcc_qcs404", + .id = UCLASS_NOP, + .of_match = gcc_qcs404_of_match, + .bind = qcom_cc_bind, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/clk/qcom/clock-sdm845.c b/drivers/clk/qcom/clock-sdm845.c index 95a057b829..a7a43f69b9 100644 --- a/drivers/clk/qcom/clock-sdm845.c +++ b/drivers/clk/qcom/clock-sdm845.c @@ -15,6 +15,7 @@ #include #include #include + #include "clock-qcom.h" #define F(f, s, h, m, n) { (f), (s), (2 * (h) - 1), (m), (n) } @@ -96,3 +97,44 @@ int msm_enable(struct clk *clk) { return 0; } + +static const struct qcom_reset_map sdm845_gcc_resets[] = { + [GCC_QUPV3_WRAPPER_0_BCR] = { 0x17000 }, + [GCC_QUPV3_WRAPPER_1_BCR] = { 0x18000 }, + [GCC_QUSB2PHY_PRIM_BCR] = { 0x12000 }, + [GCC_QUSB2PHY_SEC_BCR] = { 0x12004 }, + [GCC_SDCC2_BCR] = { 0x14000 }, + [GCC_SDCC4_BCR] = { 0x16000 }, + [GCC_UFS_CARD_BCR] = { 0x75000 }, + [GCC_UFS_PHY_BCR] = { 0x77000 }, + [GCC_USB30_PRIM_BCR] = { 0xf000 }, + [GCC_USB30_SEC_BCR] = { 0x10000 }, + [GCC_USB3_PHY_PRIM_BCR] = { 0x50000 }, + [GCC_USB3PHY_PHY_PRIM_BCR] = { 0x50004 }, + [GCC_USB3_DP_PHY_PRIM_BCR] = { 0x50008 }, + [GCC_USB3_PHY_SEC_BCR] = { 0x5000c }, + [GCC_USB3PHY_PHY_SEC_BCR] = { 0x50010 }, + [GCC_USB3_DP_PHY_SEC_BCR] = { 0x50014 }, + [GCC_USB_PHY_CFG_AHB2PHY_BCR] = { 0x6a000 }, +}; + +static const struct msm_clk_data qcs404_gcc_data = { + .resets = sdm845_gcc_resets, + .num_resets = ARRAY_SIZE(sdm845_gcc_resets), +}; + +static const struct udevice_id gcc_sdm845_of_match[] = { + { + .compatible = "qcom,gcc-sdm845", + .data = (ulong)&qcs404_gcc_data, + }, + { } +}; + +U_BOOT_DRIVER(gcc_sdm845) = { + .name = "gcc_sdm845", + .id = UCLASS_NOP, + .of_match = gcc_sdm845_of_match, + .bind = qcom_cc_bind, + .flags = DM_FLAG_PRE_RELOC, +}; diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 73bbd30692..88e04d93f2 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -156,13 +156,6 @@ config RESET_IMX7 help Support for reset controller on i.MX7/8 SoCs. -config RESET_QCOM - bool "Reset driver for Qualcomm SoCs" - depends on DM_RESET && (ARCH_SNAPDRAGON || ARCH_IPQ40XX) - default y - help - Support for reset controller on Qualcomm SoCs. - config RESET_SIFIVE bool "Reset Driver for SiFive SoC's" depends on DM_RESET && CLK_SIFIVE_PRCI && (TARGET_SIFIVE_UNLEASHED || TARGET_SIFIVE_UNMATCHED) diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index e2239a250a..7b0066f801 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -24,7 +24,6 @@ obj-$(CONFIG_RESET_MTMIPS) += reset-mtmips.o obj-$(CONFIG_RESET_SUNXI) += reset-sunxi.o obj-$(CONFIG_RESET_HISILICON) += reset-hisilicon.o obj-$(CONFIG_RESET_IMX7) += reset-imx7.o -obj-$(CONFIG_RESET_QCOM) += reset-qcom.o obj-$(CONFIG_RESET_SIFIVE) += reset-sifive.o obj-$(CONFIG_RESET_SYSCON) += reset-syscon.o obj-$(CONFIG_RESET_RASPBERRYPI) += reset-raspberrypi.o diff --git a/drivers/reset/reset-qcom.c b/drivers/reset/reset-qcom.c deleted file mode 100644 index 94315e76d5..0000000000 --- a/drivers/reset/reset-qcom.c +++ /dev/null @@ -1,195 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (c) 2020 Sartura Ltd. - * Copyright (c) 2022 Linaro Ltd. - * - * Author: Robert Marko - * Sumit Garg - * - * Based on Linux driver - */ - -#include -#include -#include -#include -#include -#include - -struct qcom_reset_priv { - phys_addr_t base; -}; - -struct qcom_reset_map { - unsigned int reg; - u8 bit; -}; - -#ifdef CONFIG_ARCH_IPQ40XX -#include -static const struct qcom_reset_map gcc_qcom_resets[] = { - [WIFI0_CPU_INIT_RESET] = { 0x1f008, 5 }, - [WIFI0_RADIO_SRIF_RESET] = { 0x1f008, 4 }, - [WIFI0_RADIO_WARM_RESET] = { 0x1f008, 3 }, - [WIFI0_RADIO_COLD_RESET] = { 0x1f008, 2 }, - [WIFI0_CORE_WARM_RESET] = { 0x1f008, 1 }, - [WIFI0_CORE_COLD_RESET] = { 0x1f008, 0 }, - [WIFI1_CPU_INIT_RESET] = { 0x20008, 5 }, - [WIFI1_RADIO_SRIF_RESET] = { 0x20008, 4 }, - [WIFI1_RADIO_WARM_RESET] = { 0x20008, 3 }, - [WIFI1_RADIO_COLD_RESET] = { 0x20008, 2 }, - [WIFI1_CORE_WARM_RESET] = { 0x20008, 1 }, - [WIFI1_CORE_COLD_RESET] = { 0x20008, 0 }, - [USB3_UNIPHY_PHY_ARES] = { 0x1e038, 5 }, - [USB3_HSPHY_POR_ARES] = { 0x1e038, 4 }, - [USB3_HSPHY_S_ARES] = { 0x1e038, 2 }, - [USB2_HSPHY_POR_ARES] = { 0x1e01c, 4 }, - [USB2_HSPHY_S_ARES] = { 0x1e01c, 2 }, - [PCIE_PHY_AHB_ARES] = { 0x1d010, 11 }, - [PCIE_AHB_ARES] = { 0x1d010, 10 }, - [PCIE_PWR_ARES] = { 0x1d010, 9 }, - [PCIE_PIPE_STICKY_ARES] = { 0x1d010, 8 }, - [PCIE_AXI_M_STICKY_ARES] = { 0x1d010, 7 }, - [PCIE_PHY_ARES] = { 0x1d010, 6 }, - [PCIE_PARF_XPU_ARES] = { 0x1d010, 5 }, - [PCIE_AXI_S_XPU_ARES] = { 0x1d010, 4 }, - [PCIE_AXI_M_VMIDMT_ARES] = { 0x1d010, 3 }, - [PCIE_PIPE_ARES] = { 0x1d010, 2 }, - [PCIE_AXI_S_ARES] = { 0x1d010, 1 }, - [PCIE_AXI_M_ARES] = { 0x1d010, 0 }, - [ESS_RESET] = { 0x12008, 0}, - [GCC_BLSP1_BCR] = {0x01000, 0}, - [GCC_BLSP1_QUP1_BCR] = {0x02000, 0}, - [GCC_BLSP1_UART1_BCR] = {0x02038, 0}, - [GCC_BLSP1_QUP2_BCR] = {0x03008, 0}, - [GCC_BLSP1_UART2_BCR] = {0x03028, 0}, - [GCC_BIMC_BCR] = {0x04000, 0}, - [GCC_TLMM_BCR] = {0x05000, 0}, - [GCC_IMEM_BCR] = {0x0E000, 0}, - [GCC_ESS_BCR] = {0x12008, 0}, - [GCC_PRNG_BCR] = {0x13000, 0}, - [GCC_BOOT_ROM_BCR] = {0x13008, 0}, - [GCC_CRYPTO_BCR] = {0x16000, 0}, - [GCC_SDCC1_BCR] = {0x18000, 0}, - [GCC_SEC_CTRL_BCR] = {0x1A000, 0}, - [GCC_AUDIO_BCR] = {0x1B008, 0}, - [GCC_QPIC_BCR] = {0x1C000, 0}, - [GCC_PCIE_BCR] = {0x1D000, 0}, - [GCC_USB2_BCR] = {0x1E008, 0}, - [GCC_USB2_PHY_BCR] = {0x1E018, 0}, - [GCC_USB3_BCR] = {0x1E024, 0}, - [GCC_USB3_PHY_BCR] = {0x1E034, 0}, - [GCC_SYSTEM_NOC_BCR] = {0x21000, 0}, - [GCC_PCNOC_BCR] = {0x2102C, 0}, - [GCC_DCD_BCR] = {0x21038, 0}, - [GCC_SNOC_BUS_TIMEOUT0_BCR] = {0x21064, 0}, - [GCC_SNOC_BUS_TIMEOUT1_BCR] = {0x2106C, 0}, - [GCC_SNOC_BUS_TIMEOUT2_BCR] = {0x21074, 0}, - [GCC_SNOC_BUS_TIMEOUT3_BCR] = {0x2107C, 0}, - [GCC_PCNOC_BUS_TIMEOUT0_BCR] = {0x21084, 0}, - [GCC_PCNOC_BUS_TIMEOUT1_BCR] = {0x2108C, 0}, - [GCC_PCNOC_BUS_TIMEOUT2_BCR] = {0x21094, 0}, - [GCC_PCNOC_BUS_TIMEOUT3_BCR] = {0x2109C, 0}, - [GCC_PCNOC_BUS_TIMEOUT4_BCR] = {0x210A4, 0}, - [GCC_PCNOC_BUS_TIMEOUT5_BCR] = {0x210AC, 0}, - [GCC_PCNOC_BUS_TIMEOUT6_BCR] = {0x210B4, 0}, - [GCC_PCNOC_BUS_TIMEOUT7_BCR] = {0x210BC, 0}, - [GCC_PCNOC_BUS_TIMEOUT8_BCR] = {0x210C4, 0}, - [GCC_PCNOC_BUS_TIMEOUT9_BCR] = {0x210CC, 0}, - [GCC_TCSR_BCR] = {0x22000, 0}, - [GCC_MPM_BCR] = {0x24000, 0}, - [GCC_SPDM_BCR] = {0x25000, 0}, -}; -#endif - -#ifdef CONFIG_TARGET_QCS404EVB -#include -static const struct qcom_reset_map gcc_qcom_resets[] = { - [GCC_GENI_IR_BCR] = { 0x0F000 }, - [GCC_CDSP_RESTART] = { 0x18000 }, - [GCC_USB_HS_BCR] = { 0x41000 }, - [GCC_USB2_HS_PHY_ONLY_BCR] = { 0x41034 }, - [GCC_QUSB2_PHY_BCR] = { 0x4103c }, - [GCC_USB_HS_PHY_CFG_AHB_BCR] = { 0x0000c, 1 }, - [GCC_USB2A_PHY_BCR] = { 0x0000c, 0 }, - [GCC_USB3_PHY_BCR] = { 0x39004 }, - [GCC_USB_30_BCR] = { 0x39000 }, - [GCC_USB3PHY_PHY_BCR] = { 0x39008 }, - [GCC_PCIE_0_BCR] = { 0x3e000 }, - [GCC_PCIE_0_PHY_BCR] = { 0x3e004 }, - [GCC_PCIE_0_LINK_DOWN_BCR] = { 0x3e038 }, - [GCC_PCIEPHY_0_PHY_BCR] = { 0x3e03c }, - [GCC_PCIE_0_AXI_MASTER_STICKY_ARES] = { 0x3e040, 6}, - [GCC_PCIE_0_AHB_ARES] = { 0x3e040, 5 }, - [GCC_PCIE_0_AXI_SLAVE_ARES] = { 0x3e040, 4 }, - [GCC_PCIE_0_AXI_MASTER_ARES] = { 0x3e040, 3 }, - [GCC_PCIE_0_CORE_STICKY_ARES] = { 0x3e040, 2 }, - [GCC_PCIE_0_SLEEP_ARES] = { 0x3e040, 1 }, - [GCC_PCIE_0_PIPE_ARES] = { 0x3e040, 0 }, - [GCC_EMAC_BCR] = { 0x4e000 }, - [GCC_WDSP_RESTART] = {0x19000}, -}; -#endif - -static int qcom_reset_assert(struct reset_ctl *rst) -{ - struct qcom_reset_priv *priv = dev_get_priv(rst->dev); - const struct qcom_reset_map *reset_map = gcc_qcom_resets; - const struct qcom_reset_map *map; - u32 value; - - map = &reset_map[rst->id]; - - value = readl(priv->base + map->reg); - value |= BIT(map->bit); - writel(value, priv->base + map->reg); - - return 0; -} - -static int qcom_reset_deassert(struct reset_ctl *rst) -{ - struct qcom_reset_priv *priv = dev_get_priv(rst->dev); - const struct qcom_reset_map *reset_map = gcc_qcom_resets; - const struct qcom_reset_map *map; - u32 value; - - map = &reset_map[rst->id]; - - value = readl(priv->base + map->reg); - value &= ~BIT(map->bit); - writel(value, priv->base + map->reg); - - return 0; -} - -static const struct reset_ops qcom_reset_ops = { - .rst_assert = qcom_reset_assert, - .rst_deassert = qcom_reset_deassert, -}; - -static const struct udevice_id qcom_reset_ids[] = { - { .compatible = "qcom,gcc-reset-ipq4019" }, - { .compatible = "qcom,gcc-reset-qcs404" }, - { } -}; - -static int qcom_reset_probe(struct udevice *dev) -{ - struct qcom_reset_priv *priv = dev_get_priv(dev); - - priv->base = dev_read_addr(dev); - if (priv->base == FDT_ADDR_T_NONE) - return -EINVAL; - - return 0; -} - -U_BOOT_DRIVER(qcom_reset) = { - .name = "qcom_reset", - .id = UCLASS_RESET, - .of_match = qcom_reset_ids, - .ops = &qcom_reset_ops, - .probe = qcom_reset_probe, - .priv_auto = sizeof(struct qcom_reset_priv), -}; diff --git a/include/dt-bindings/clock/qcom,ipq4019-gcc.h b/include/dt-bindings/clock/qcom,gcc-ipq4019.h similarity index 58% rename from include/dt-bindings/clock/qcom,ipq4019-gcc.h rename to include/dt-bindings/clock/qcom,gcc-ipq4019.h index 7130e222e4..7e8a7be6dc 100644 --- a/include/dt-bindings/clock/qcom,ipq4019-gcc.h +++ b/include/dt-bindings/clock/qcom,gcc-ipq4019.h @@ -93,4 +93,77 @@ #define GCC_APSS_CPU_PLLDIV_CLK 74 #define GCC_PCNOC_AHB_CLK_SRC 75 +#define WIFI0_CPU_INIT_RESET 0 +#define WIFI0_RADIO_SRIF_RESET 1 +#define WIFI0_RADIO_WARM_RESET 2 +#define WIFI0_RADIO_COLD_RESET 3 +#define WIFI0_CORE_WARM_RESET 4 +#define WIFI0_CORE_COLD_RESET 5 +#define WIFI1_CPU_INIT_RESET 6 +#define WIFI1_RADIO_SRIF_RESET 7 +#define WIFI1_RADIO_WARM_RESET 8 +#define WIFI1_RADIO_COLD_RESET 9 +#define WIFI1_CORE_WARM_RESET 10 +#define WIFI1_CORE_COLD_RESET 11 +#define USB3_UNIPHY_PHY_ARES 12 +#define USB3_HSPHY_POR_ARES 13 +#define USB3_HSPHY_S_ARES 14 +#define USB2_HSPHY_POR_ARES 15 +#define USB2_HSPHY_S_ARES 16 +#define PCIE_PHY_AHB_ARES 17 +#define PCIE_AHB_ARES 18 +#define PCIE_PWR_ARES 19 +#define PCIE_PIPE_STICKY_ARES 20 +#define PCIE_AXI_M_STICKY_ARES 21 +#define PCIE_PHY_ARES 22 +#define PCIE_PARF_XPU_ARES 23 +#define PCIE_AXI_S_XPU_ARES 24 +#define PCIE_AXI_M_VMIDMT_ARES 25 +#define PCIE_PIPE_ARES 26 +#define PCIE_AXI_S_ARES 27 +#define PCIE_AXI_M_ARES 28 +#define ESS_RESET 29 +#define GCC_BLSP1_BCR 30 +#define GCC_BLSP1_QUP1_BCR 31 +#define GCC_BLSP1_UART1_BCR 32 +#define GCC_BLSP1_QUP2_BCR 33 +#define GCC_BLSP1_UART2_BCR 34 +#define GCC_BIMC_BCR 35 +#define GCC_TLMM_BCR 36 +#define GCC_IMEM_BCR 37 +#define GCC_ESS_BCR 38 +#define GCC_PRNG_BCR 39 +#define GCC_BOOT_ROM_BCR 40 +#define GCC_CRYPTO_BCR 41 +#define GCC_SDCC1_BCR 42 +#define GCC_SEC_CTRL_BCR 43 +#define GCC_AUDIO_BCR 44 +#define GCC_QPIC_BCR 45 +#define GCC_PCIE_BCR 46 +#define GCC_USB2_BCR 47 +#define GCC_USB2_PHY_BCR 48 +#define GCC_USB3_BCR 49 +#define GCC_USB3_PHY_BCR 50 +#define GCC_SYSTEM_NOC_BCR 51 +#define GCC_PCNOC_BCR 52 +#define GCC_DCD_BCR 53 +#define GCC_SNOC_BUS_TIMEOUT0_BCR 54 +#define GCC_SNOC_BUS_TIMEOUT1_BCR 55 +#define GCC_SNOC_BUS_TIMEOUT2_BCR 56 +#define GCC_SNOC_BUS_TIMEOUT3_BCR 57 +#define GCC_PCNOC_BUS_TIMEOUT0_BCR 58 +#define GCC_PCNOC_BUS_TIMEOUT1_BCR 59 +#define GCC_PCNOC_BUS_TIMEOUT2_BCR 60 +#define GCC_PCNOC_BUS_TIMEOUT3_BCR 61 +#define GCC_PCNOC_BUS_TIMEOUT4_BCR 62 +#define GCC_PCNOC_BUS_TIMEOUT5_BCR 63 +#define GCC_PCNOC_BUS_TIMEOUT6_BCR 64 +#define GCC_PCNOC_BUS_TIMEOUT7_BCR 65 +#define GCC_PCNOC_BUS_TIMEOUT8_BCR 66 +#define GCC_PCNOC_BUS_TIMEOUT9_BCR 67 +#define GCC_TCSR_BCR 68 +#define GCC_QDSS_BCR 69 +#define GCC_MPM_BCR 70 +#define GCC_SPDM_BCR 71 + #endif diff --git a/include/dt-bindings/reset/qcom,ipq4019-reset.h b/include/dt-bindings/reset/qcom,ipq4019-reset.h deleted file mode 100644 index ed047d7402..0000000000 --- a/include/dt-bindings/reset/qcom,ipq4019-reset.h +++ /dev/null @@ -1,92 +0,0 @@ -/* Copyright (c) 2015 The Linux Foundation. All rights reserved. - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above - * copyright notice and this permission notice appear in all copies. - * - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF - * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - * - */ -#ifndef __QCOM_RESET_IPQ4019_H__ -#define __QCOM_RESET_IPQ4019_H__ - -#define WIFI0_CPU_INIT_RESET 0 -#define WIFI0_RADIO_SRIF_RESET 1 -#define WIFI0_RADIO_WARM_RESET 2 -#define WIFI0_RADIO_COLD_RESET 3 -#define WIFI0_CORE_WARM_RESET 4 -#define WIFI0_CORE_COLD_RESET 5 -#define WIFI1_CPU_INIT_RESET 6 -#define WIFI1_RADIO_SRIF_RESET 7 -#define WIFI1_RADIO_WARM_RESET 8 -#define WIFI1_RADIO_COLD_RESET 9 -#define WIFI1_CORE_WARM_RESET 10 -#define WIFI1_CORE_COLD_RESET 11 -#define USB3_UNIPHY_PHY_ARES 12 -#define USB3_HSPHY_POR_ARES 13 -#define USB3_HSPHY_S_ARES 14 -#define USB2_HSPHY_POR_ARES 15 -#define USB2_HSPHY_S_ARES 16 -#define PCIE_PHY_AHB_ARES 17 -#define PCIE_AHB_ARES 18 -#define PCIE_PWR_ARES 19 -#define PCIE_PIPE_STICKY_ARES 20 -#define PCIE_AXI_M_STICKY_ARES 21 -#define PCIE_PHY_ARES 22 -#define PCIE_PARF_XPU_ARES 23 -#define PCIE_AXI_S_XPU_ARES 24 -#define PCIE_AXI_M_VMIDMT_ARES 25 -#define PCIE_PIPE_ARES 26 -#define PCIE_AXI_S_ARES 27 -#define PCIE_AXI_M_ARES 28 -#define ESS_RESET 29 -#define GCC_BLSP1_BCR 30 -#define GCC_BLSP1_QUP1_BCR 31 -#define GCC_BLSP1_UART1_BCR 32 -#define GCC_BLSP1_QUP2_BCR 33 -#define GCC_BLSP1_UART2_BCR 34 -#define GCC_BIMC_BCR 35 -#define GCC_TLMM_BCR 36 -#define GCC_IMEM_BCR 37 -#define GCC_ESS_BCR 38 -#define GCC_PRNG_BCR 39 -#define GCC_BOOT_ROM_BCR 40 -#define GCC_CRYPTO_BCR 41 -#define GCC_SDCC1_BCR 42 -#define GCC_SEC_CTRL_BCR 43 -#define GCC_AUDIO_BCR 44 -#define GCC_QPIC_BCR 45 -#define GCC_PCIE_BCR 46 -#define GCC_USB2_BCR 47 -#define GCC_USB2_PHY_BCR 48 -#define GCC_USB3_BCR 49 -#define GCC_USB3_PHY_BCR 50 -#define GCC_SYSTEM_NOC_BCR 51 -#define GCC_PCNOC_BCR 52 -#define GCC_DCD_BCR 53 -#define GCC_SNOC_BUS_TIMEOUT0_BCR 54 -#define GCC_SNOC_BUS_TIMEOUT1_BCR 55 -#define GCC_SNOC_BUS_TIMEOUT2_BCR 56 -#define GCC_SNOC_BUS_TIMEOUT3_BCR 57 -#define GCC_PCNOC_BUS_TIMEOUT0_BCR 58 -#define GCC_PCNOC_BUS_TIMEOUT1_BCR 59 -#define GCC_PCNOC_BUS_TIMEOUT2_BCR 60 -#define GCC_PCNOC_BUS_TIMEOUT3_BCR 61 -#define GCC_PCNOC_BUS_TIMEOUT4_BCR 62 -#define GCC_PCNOC_BUS_TIMEOUT5_BCR 63 -#define GCC_PCNOC_BUS_TIMEOUT6_BCR 64 -#define GCC_PCNOC_BUS_TIMEOUT7_BCR 65 -#define GCC_PCNOC_BUS_TIMEOUT8_BCR 66 -#define GCC_PCNOC_BUS_TIMEOUT9_BCR 67 -#define GCC_TCSR_BCR 68 -#define GCC_QDSS_BCR 69 -#define GCC_MPM_BCR 70 -#define GCC_SPDM_BCR 71 - -#endif -- 2.39.5