From 352ba256daafcd9b11d8196e662168558033b091 Mon Sep 17 00:00:00 2001 From: Sam Edwards Date: Wed, 11 Oct 2023 19:47:56 -0600 Subject: [PATCH] sunxi: psci: implement PSCI on R528 This patch adds the necessary code to make nonsec booting and PSCI secondary core management functional on the R528/T113. Signed-off-by: Sam Edwards Tested-by: Maksim Kiselev Tested-by: Kevin Amadiva Reviewed-by: Andre Przywara --- arch/arm/cpu/armv7/Kconfig | 3 +- arch/arm/cpu/armv7/sunxi/psci.c | 52 ++++++++++++++++++++++++++++++++- arch/arm/mach-sunxi/Kconfig | 4 +++ 3 files changed, 57 insertions(+), 2 deletions(-) diff --git a/arch/arm/cpu/armv7/Kconfig b/arch/arm/cpu/armv7/Kconfig index f015d133cb..4eb34b7b44 100644 --- a/arch/arm/cpu/armv7/Kconfig +++ b/arch/arm/cpu/armv7/Kconfig @@ -61,8 +61,9 @@ config ARMV7_SECURE_MAX_SIZE config ARM_GIC_BASE_ADDRESS hex depends on ARMV7_NONSEC - depends on ARCH_EXYNOS5 + depends on ARCH_EXYNOS5 || MACH_SUN8I_R528 default 0x10480000 if ARCH_EXYNOS5 + default 0x03020000 if MACH_SUN8I_R528 help Override the GIC base address if the Arm Cortex defined CBAR/PERIPHBASE system register holds the wrong value. diff --git a/arch/arm/cpu/armv7/sunxi/psci.c b/arch/arm/cpu/armv7/sunxi/psci.c index 207aa6bc4b..5cb8cfa6cf 100644 --- a/arch/arm/cpu/armv7/sunxi/psci.c +++ b/arch/arm/cpu/armv7/sunxi/psci.c @@ -47,6 +47,24 @@ #define SUN8I_R40_PWR_CLAMP(cpu) (0x120 + (cpu) * 0x4) #define SUN8I_R40_SRAMC_SOFT_ENTRY_REG0 (0xbc) +/* + * R528 is also different, as it has both cores powered up (but held in reset + * state) after the SoC is reset. Like the R40, it uses a "soft" entry point + * address register, but unlike the R40, it uses a newer "CPUX" block to manage + * CPU state, rather than the older CPUCFG system. + */ +#define SUN8I_R528_SOFT_ENTRY (0x1c8) +#define SUN8I_R528_C0_RST_CTRL (0x0000) +#define SUN8I_R528_C0_CTRL_REG0 (0x0010) +#define SUN8I_R528_C0_CPU_STATUS (0x0080) + +#define SUN8I_R528_C0_STATUS_STANDBYWFI (16) + +/* Only newer cores have this additional IP block. */ +#ifndef SUNXI_R_CPUCFG_BASE +#define SUNXI_R_CPUCFG_BASE 0 +#endif + static void __secure cp15_write_cntp_tval(u32 tval) { asm volatile ("mcr p15, 0, %0, c14, c2, 0" : : "r" (tval)); @@ -103,10 +121,12 @@ static void __secure clamp_set(u32 *clamp) static void __secure sunxi_cpu_set_entry(int __always_unused cpu, void *entry) { - /* secondary core entry address is programmed differently on R40 */ if (IS_ENABLED(CONFIG_MACH_SUN8I_R40)) { writel((u32)entry, SUNXI_SRAMC_BASE + SUN8I_R40_SRAMC_SOFT_ENTRY_REG0); + } else if (IS_ENABLED(CONFIG_MACH_SUN8I_R528)) { + writel((u32)entry, + SUNXI_R_CPUCFG_BASE + SUN8I_R528_SOFT_ENTRY); } else { writel((u32)entry, SUNXI_CPUCFG_BASE + SUNXI_PRIV0); } @@ -125,6 +145,9 @@ static void __secure sunxi_cpu_set_power(int cpu, bool on) } else if (IS_ENABLED(CONFIG_MACH_SUN8I_R40)) { clamp = (void *)SUNXI_CPUCFG_BASE + SUN8I_R40_PWR_CLAMP(cpu); pwroff = (void *)SUNXI_CPUCFG_BASE + SUN8I_R40_PWROFF; + } else if (IS_ENABLED(CONFIG_MACH_SUN8I_R528)) { + /* R528 leaves both cores powered up, manages them via reset */ + return; } else { if (IS_ENABLED(CONFIG_MACH_SUN6I) || IS_ENABLED(CONFIG_MACH_SUN8I_H3)) @@ -152,11 +175,27 @@ static void __secure sunxi_cpu_set_power(int cpu, bool on) static void __secure sunxi_cpu_set_reset(int cpu, bool reset) { + if (IS_ENABLED(CONFIG_MACH_SUN8I_R528)) { + if (reset) + clrbits_le32(SUNXI_CPUCFG_BASE + SUN8I_R528_C0_RST_CTRL, + BIT(cpu)); + else + setbits_le32(SUNXI_CPUCFG_BASE + SUN8I_R528_C0_RST_CTRL, + BIT(cpu)); + + return; + } + writel(reset ? 0b00 : 0b11, SUNXI_CPUCFG_BASE + SUNXI_CPU_RST(cpu)); } static void __secure sunxi_cpu_set_locking(int cpu, bool lock) { + if (IS_ENABLED(CONFIG_MACH_SUN8I_R528)) { + /* Not required on R528 */ + return; + } + if (lock) clrbits_le32(SUNXI_CPUCFG_BASE + SUNXI_DBG_CTRL1, BIT(cpu)); else @@ -165,11 +204,22 @@ static void __secure sunxi_cpu_set_locking(int cpu, bool lock) static bool __secure sunxi_cpu_poll_wfi(int cpu) { + if (IS_ENABLED(CONFIG_MACH_SUN8I_R528)) { + return !!(readl(SUNXI_CPUCFG_BASE + SUN8I_R528_C0_CPU_STATUS) & + BIT(SUN8I_R528_C0_STATUS_STANDBYWFI + cpu)); + } + return !!(readl(SUNXI_CPUCFG_BASE + SUNXI_CPU_STATUS(cpu)) & BIT(2)); } static void __secure sunxi_cpu_invalidate_cache(int cpu) { + if (IS_ENABLED(CONFIG_MACH_SUN8I_R528)) { + clrbits_le32(SUNXI_CPUCFG_BASE + SUN8I_R528_C0_CTRL_REG0, + BIT(cpu)); + return; + } + clrbits_le32(SUNXI_CPUCFG_BASE + SUNXI_GEN_CTRL, BIT(cpu)); } diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig index d976203ee7..40ca7d7b3a 100644 --- a/arch/arm/mach-sunxi/Kconfig +++ b/arch/arm/mach-sunxi/Kconfig @@ -349,6 +349,10 @@ config MACH_SUN8I_R40 config MACH_SUN8I_R528 bool "sun8i (Allwinner R528)" select CPU_V7A + select CPU_V7_HAS_NONSEC + select CPU_V7_HAS_VIRT + select ARCH_SUPPORT_PSCI + select SPL_ARMV7_SET_CORTEX_SMPEN select SUNXI_GEN_NCAT2 select SUNXI_NEW_PINCTRL select MMC_SUNXI_HAS_NEW_MODE -- 2.39.5