From 2df286390a8009238ab9ccf5694ac088f3f90da3 Mon Sep 17 00:00:00 2001 From: George Hilliard Date: Wed, 30 Sep 2020 09:28:21 -0500 Subject: [PATCH] spi: mvebu_a3700_spi: add support for cs-gpios The device tree has a way to specify GPIO lines as chip selects. From the binding docs: So if for example the controller has 2 CS lines, and the cs-gpios property looks like this: cs-gpios = <&gpio1 0 0> <0> <&gpio1 1 0> <&gpio1 2 0>; Then it should be configured so that num_chipselect = 4 with the following mapping: cs0 : &gpio1 0 0 cs1 : native cs2 : &gpio1 1 0 cs3 : &gpio1 2 0 Add support for this, while retaining backward-compatibility with existing device trees; the driver will preserve existing behavior if a cs-gpios list is not given, or if a particular line is specified as <0> (native). This implementation is inspired by similar implementations in neighboring drivers for other platforms: atmega, mxc, etc. Signed-off-by: George Hilliard Reviewed-by: Stefan Roese --- drivers/spi/mvebu_a3700_spi.c | 41 ++++++++++++++++++++++++++++++----- 1 file changed, 35 insertions(+), 6 deletions(-) diff --git a/drivers/spi/mvebu_a3700_spi.c b/drivers/spi/mvebu_a3700_spi.c index e860b9ec64..eb13cf349e 100644 --- a/drivers/spi/mvebu_a3700_spi.c +++ b/drivers/spi/mvebu_a3700_spi.c @@ -15,6 +15,7 @@ #include #include #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -27,6 +28,7 @@ DECLARE_GLOBAL_DATA_PTR; #define MVEBU_SPI_A3700_SPI_EN_0 BIT(16) #define MVEBU_SPI_A3700_CLK_PRESCALE_MASK 0x1f +#define MAX_CS_COUNT 4 /* SPI registers */ struct spi_reg { @@ -39,16 +41,23 @@ struct spi_reg { struct mvebu_spi_platdata { struct spi_reg *spireg; struct clk clk; + struct gpio_desc cs_gpios[MAX_CS_COUNT]; }; -static void spi_cs_activate(struct spi_reg *reg, int cs) +static void spi_cs_activate(struct mvebu_spi_platdata *plat, int cs) { - setbits_le32(®->ctrl, MVEBU_SPI_A3700_SPI_EN_0 << cs); + if (CONFIG_IS_ENABLED(DM_GPIO) && dm_gpio_is_valid(&plat->cs_gpios[cs])) + dm_gpio_set_value(&plat->cs_gpios[cs], 1); + else + setbits_le32(&plat->spireg->ctrl, MVEBU_SPI_A3700_SPI_EN_0 << cs); } -static void spi_cs_deactivate(struct spi_reg *reg, int cs) +static void spi_cs_deactivate(struct mvebu_spi_platdata *plat, int cs) { - clrbits_le32(®->ctrl, MVEBU_SPI_A3700_SPI_EN_0 << cs); + if (CONFIG_IS_ENABLED(DM_GPIO) && dm_gpio_is_valid(&plat->cs_gpios[cs])) + dm_gpio_set_value(&plat->cs_gpios[cs], 0); + else + clrbits_le32(&plat->spireg->ctrl, MVEBU_SPI_A3700_SPI_EN_0 << cs); } /** @@ -150,7 +159,7 @@ static int mvebu_spi_xfer(struct udevice *dev, unsigned int bitlen, /* Activate CS */ if (flags & SPI_XFER_BEGIN) { debug("SPI: activate cs.\n"); - spi_cs_activate(reg, spi_chip_select(dev)); + spi_cs_activate(plat, spi_chip_select(dev)); } /* Send and/or receive */ @@ -169,7 +178,7 @@ static int mvebu_spi_xfer(struct udevice *dev, unsigned int bitlen, return ret; debug("SPI: deactivate cs.\n"); - spi_cs_deactivate(reg, spi_chip_select(dev)); + spi_cs_deactivate(plat, spi_chip_select(dev)); } return 0; @@ -247,6 +256,26 @@ static int mvebu_spi_probe(struct udevice *bus) writel(data, ®->cfg); + /* Set up CS GPIOs in device tree, if any */ + if (CONFIG_IS_ENABLED(DM_GPIO) && gpio_get_list_count(bus, "cs-gpios") > 0) { + int i; + + for (i = 0; i < ARRAY_SIZE(plat->cs_gpios); i++) { + ret = gpio_request_by_name(bus, "cs-gpios", i, &plat->cs_gpios[i], 0); + if (ret < 0 || !dm_gpio_is_valid(&plat->cs_gpios[i])) { + /* Use the native CS function for this line */ + continue; + } + + ret = dm_gpio_set_dir_flags(&plat->cs_gpios[i], + GPIOD_IS_OUT | GPIOD_ACTIVE_LOW); + if (ret) { + dev_err(bus, "Setting cs %d error\n", i); + return ret; + } + } + } + return 0; } -- 2.39.5