From 23b159ed4af4e25a3a604b2417637fc5d1a8e590 Mon Sep 17 00:00:00 2001 From: AKASHI Takahiro Date: Tue, 14 Nov 2023 11:14:27 +0900 Subject: [PATCH] doc: cmd: add documentation for scmi This is a help text for scmi command. Signed-off-by: AKASHI Takahiro Reviewed-by: Simon Glass Reviewed-by: Etienne Carriere --- doc/usage/cmd/scmi.rst | 126 +++++++++++++++++++++++++++++++++++++++++ doc/usage/index.rst | 1 + 2 files changed, 127 insertions(+) create mode 100644 doc/usage/cmd/scmi.rst diff --git a/doc/usage/cmd/scmi.rst b/doc/usage/cmd/scmi.rst new file mode 100644 index 0000000000..9ea7e0e41d --- /dev/null +++ b/doc/usage/cmd/scmi.rst @@ -0,0 +1,126 @@ +.. SPDX-License-Identifier: GPL-2.0+: + +scmi command +============ + +Synopsis +-------- + +:: + + scmi info + scmi perm_dev + scmi perm_proto + scmi reset + +Description +----------- + +Arm System Control and Management Interface (SCMI hereafter) is a set of +standardised interfaces to manage system resources, like clocks, power +domains, pin controls, reset and so on, in a system-wide manner. + +An entity which provides those services is called a SCMI firmware (or +SCMI server if you like) may be placed/implemented by EL3 software or +by a dedicated system control processor (SCP) or else. + +A user of SCMI interfaces, including U-Boot, is called a SCMI agent and +may issues commands, which are defined in each protocol for specific system +resources, to SCMI server via a communication channel, called a transport. +Those interfaces are independent from the server's implementation thanks to +a transport layer. + +For more details, see the `SCMI specification`_. + +While most of system resources managed under SCMI protocols are implemented +and handled as standard U-Boot devices, for example clk_scmi, scmi command +provides additional management functionality against SCMI server. + +scmi info +~~~~~~~~~ + Show base information about SCMI server and supported protocols + +scmi perm_dev +~~~~~~~~~~~~~ + Allow or deny access permission to the device + +scmi perm_proto +~~~~~~~~~~~~~~~ + Allow or deny access to the protocol on the device + +scmi reset +~~~~~~~~~~ + Reset the already-configured permissions against the device + +Parameters are used as follows: + + + SCMI Agent ID, hex value + + + SCMI Device ID, hex value + + Please note that what a device means is not defined + in the specification. + + + SCMI Protocol ID, hex value + + It must not be 0x10 (base protocol) + + + Flags to control the action, hex value + + 0 to deny, 1 to allow. The other values are reserved and allowed + values may depend on the implemented version of SCMI server in + the future. See SCMI specification for more details. + +Example +------- + +Obtain basic information about SCMI server: + +:: + + => scmi info + SCMI device: scmi + protocol version: 0x20000 + # of agents: 3 + 0: platform + > 1: OSPM + 2: PSCI + # of protocols: 4 + Power domain management + Performance domain management + Clock management + Sensor management + vendor: Linaro + sub vendor: PMWG + impl version: 0x20b0000 + +Ask for access permission to device#0: + +:: + + => scmi perm_dev 1 0 1 + +Reset configurations with all access permission settings retained: + +:: + + => scmi reset 1 0 + +Configuration +------------- + +The scmi command is only available if CONFIG_CMD_SCMI=y. +Default n because this command is mainly for debug purpose. + +Return value +------------ + +The return value ($?) is set to 0 if the operation succeeded, +1 if the operation failed or -1 if the operation failed due to +a syntax error. + +.. _`SCMI specification`: https://developer.arm.com/documentation/den0056/e/?lang=en diff --git a/doc/usage/index.rst b/doc/usage/index.rst index d8e23fcacf..1a626c03c2 100644 --- a/doc/usage/index.rst +++ b/doc/usage/index.rst @@ -94,6 +94,7 @@ Shell commands cmd/rng cmd/saves cmd/sbi + cmd/scmi cmd/scp03 cmd/seama cmd/setexpr -- 2.39.5