From 2232d5f5b7ef1d49814686573f34624891f0c7f1 Mon Sep 17 00:00:00 2001 From: Peng Fan Date: Thu, 5 May 2022 15:43:30 +0800 Subject: [PATCH] imx: imx8mm_mx8menlo: Enable DM_SERIAL Enable CONFIG_DM_SERIAL. uart2 and its pinmux was already marked with u-boot,dm-spl. Signed-off-by: Peng Fan Reviewed-by: Fabio Estevam --- board/menlo/mx8menlo/mx8menlo.c | 9 --------- configs/imx8mm-mx8menlo_defconfig | 1 + include/configs/imx8mm-mx8menlo.h | 3 --- 3 files changed, 1 insertion(+), 12 deletions(-) diff --git a/board/menlo/mx8menlo/mx8menlo.c b/board/menlo/mx8menlo/mx8menlo.c index a4d0becdcc..95ff95ad36 100644 --- a/board/menlo/mx8menlo/mx8menlo.c +++ b/board/menlo/mx8menlo/mx8menlo.c @@ -12,15 +12,8 @@ #include #include -#define UART_PAD_CTRL (PAD_CTL_PUE | PAD_CTL_PE | PAD_CTL_DSE4) #define WDOG_PAD_CTRL (PAD_CTL_DSE6 | PAD_CTL_ODE | PAD_CTL_PUE | PAD_CTL_PE) -/* Verdin UART_3, Console/Debug UART */ -static iomux_v3_cfg_t const uart_pads[] = { - IMX8MM_PAD_SAI3_TXFS_UART2_RX | MUX_PAD_CTRL(UART_PAD_CTRL), - IMX8MM_PAD_SAI3_TXC_UART2_TX | MUX_PAD_CTRL(UART_PAD_CTRL), -}; - static iomux_v3_cfg_t const wdog_pads[] = { IMX8MM_PAD_GPIO1_IO02_WDOG1_WDOG_B | MUX_PAD_CTRL(WDOG_PAD_CTRL), }; @@ -48,8 +41,6 @@ void board_early_init(void) set_wdog_reset(wdog); - imx_iomux_v3_setup_multiple_pads(uart_pads, ARRAY_SIZE(uart_pads)); - init_uart_clk(1); setup_snvs(); diff --git a/configs/imx8mm-mx8menlo_defconfig b/configs/imx8mm-mx8menlo_defconfig index 0d3e19e5e3..a4164951de 100644 --- a/configs/imx8mm-mx8menlo_defconfig +++ b/configs/imx8mm-mx8menlo_defconfig @@ -105,6 +105,7 @@ CONFIG_DM_PMIC_PFUZE100=y CONFIG_DM_REGULATOR=y CONFIG_DM_REGULATOR_FIXED=y CONFIG_DM_REGULATOR_GPIO=y +CONFIG_DM_SERIAL=y CONFIG_MXC_UART=y CONFIG_SYSRESET=y CONFIG_SPL_SYSRESET=y diff --git a/include/configs/imx8mm-mx8menlo.h b/include/configs/imx8mm-mx8menlo.h index fd1831622f..530ecd1d46 100644 --- a/include/configs/imx8mm-mx8menlo.h +++ b/include/configs/imx8mm-mx8menlo.h @@ -30,7 +30,4 @@ "initrd_addr=0x43800000\0" \ "kernel_image=fitImage\0" -#undef CONFIG_MXC_UART_BASE -#define CONFIG_MXC_UART_BASE UART2_BASE_ADDR - #endif /* __IMX8MM_MX8MENLO_H */ -- 2.39.5