From 215f1d5794c6174ec0413eb6ff7f322ed284cc5b Mon Sep 17 00:00:00 2001 From: Marek Vasut Date: Mon, 4 Mar 2024 17:16:05 +0100 Subject: [PATCH] mtd: spi-nor: Clear Winbond SR3 WPS bit on boot Some Winbond SPI NORs have special SR3 register which is used among other things to control whether non-standard "Individual Block/Sector Write Protection" (WPS bit) locking scheme is activated. This non-standard locking scheme is not supported by either U-Boot or Linux SPI NOR stack so make sure it is disabled, otherwise the SPI NOR may appear locked for no obvious reason. This SR3 WPS appears e.g. on W25Q16FW which has the same ID as W25Q16DW, but the W25Q16DW does not implement the SR3 WPS bit. Signed-off-by: Marek Vasut --- drivers/mtd/spi/spi-nor-core.c | 47 ++++++++++++++++++++++++++++++++++ include/linux/mtd/spi-nor.h | 5 ++++ 2 files changed, 52 insertions(+) diff --git a/drivers/mtd/spi/spi-nor-core.c b/drivers/mtd/spi/spi-nor-core.c index 032e429d3f..24c6c31c04 100644 --- a/drivers/mtd/spi/spi-nor-core.c +++ b/drivers/mtd/spi/spi-nor-core.c @@ -595,6 +595,24 @@ static int read_cr(struct spi_nor *nor) } #endif +/** + * read_sr3() - Read status register 3 unique to newer Winbond flashes + * @nor: pointer to a 'struct spi_nor' + */ +static int read_sr3(struct spi_nor *nor) +{ + int ret; + u8 val; + + ret = nor->read_reg(nor, SPINOR_OP_RDSR3, &val, 1); + if (ret < 0) { + dev_dbg(nor->dev, "error %d reading SR3\n", ret); + return ret; + } + + return val; +} + /* * Write status register 1 byte * Returns negative if error occurred. @@ -605,6 +623,17 @@ static int write_sr(struct spi_nor *nor, u8 val) return nor->write_reg(nor, SPINOR_OP_WRSR, nor->cmd_buf, 1); } +/** + * write_sr3() - Write status register 3 unique to newer Winbond flashes + * @nor: pointer to a 'struct spi_nor' + * @val: value to be written into SR3 + */ +static int write_sr3(struct spi_nor *nor, u8 val) +{ + nor->cmd_buf[0] = val; + return nor->write_reg(nor, SPINOR_OP_WRSR3, nor->cmd_buf, 1); +} + /* * Set write enable latch with Write Enable command. * Returns negative if error occurred. @@ -4225,6 +4254,24 @@ static int spi_nor_init(struct spi_nor *nor) write_enable(nor); write_sr(nor, 0); spi_nor_wait_till_ready(nor); + + /* + * Some Winbond SPI NORs have special SR3 register which is + * used among other things to control whether non-standard + * "Individual Block/Sector Write Protection" (WPS bit) + * locking scheme is activated. This non-standard locking + * scheme is not supported by either U-Boot or Linux SPI + * NOR stack so make sure it is disabled, otherwise the + * SPI NOR may appear locked for no obvious reason. + */ + if (JEDEC_MFR(nor->info) == SNOR_MFR_WINBOND) { + err = read_sr3(nor); + if (err > 0 && err & SR3_WPS) { + write_enable(nor); + write_sr3(nor, err & ~SR3_WPS); + write_disable(nor); + } + } } if (nor->quad_enable) { diff --git a/include/linux/mtd/spi-nor.h b/include/linux/mtd/spi-nor.h index d5f4faf0a6..047e83e846 100644 --- a/include/linux/mtd/spi-nor.h +++ b/include/linux/mtd/spi-nor.h @@ -48,6 +48,8 @@ #define SPINOR_OP_WRSR 0x01 /* Write status register 1 byte */ #define SPINOR_OP_RDSR2 0x3f /* Read status register 2 */ #define SPINOR_OP_WRSR2 0x3e /* Write status register 2 */ +#define SPINOR_OP_RDSR3 0x15 /* Read status register 3 */ +#define SPINOR_OP_WRSR3 0x11 /* Write status register 3 */ #define SPINOR_OP_READ 0x03 /* Read data bytes (low frequency) */ #define SPINOR_OP_READ_FAST 0x0b /* Read data bytes (high frequency) */ #define SPINOR_OP_READ_1_1_2 0x3b /* Read data bytes (Dual Output SPI) */ @@ -186,6 +188,9 @@ */ #define SNOR_FLASH_CNT_MAX 2 +/* Status Register 3 bits. */ +#define SR3_WPS BIT(2) + /* For Cypress flash. */ #define SPINOR_OP_RD_ANY_REG 0x65 /* Read any register */ #define SPINOR_OP_WR_ANY_REG 0x71 /* Write any register */ -- 2.39.5