From 15df6b31b62671d4e2347131bdbf4c07a305cab1 Mon Sep 17 00:00:00 2001 From: Harald Seiler Date: Wed, 15 Apr 2020 20:04:53 +0200 Subject: [PATCH] ARM: imx6: DHCOM i.MX6 PDK: Convert to DM_ETH Use DM_ETH instead of legacy networking. Add VIO as a fixed regulator to the relevant device-trees and augment the FEC node with properties for the reset GPIO. It should be noted that the relevant properties for the reset GPIO already exist in the PHY node (reset-gpios, reset-delay-us, reset-post-delay-us) but U-Boot currently ignores those and only supports the bus-level reset properties in the FEC node (phy-reset-gpios, phy-reset-duration, phy-reset-post-delay). Signed-off-by: Harald Seiler --- arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi | 6 +++ arch/arm/dts/imx6q-dhcom-pdk2-u-boot.dtsi | 2 + arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi | 21 +++++++++ board/dhelectronics/dh_imx6/dh_imx6.c | 51 +-------------------- configs/dh_imx6_defconfig | 2 + 5 files changed, 33 insertions(+), 49 deletions(-) create mode 100644 arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi create mode 100644 arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi diff --git a/arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi b/arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi new file mode 100644 index 0000000000..fc7dffea2a --- /dev/null +++ b/arch/arm/dts/imx6dl-dhcom-pdk2-u-boot.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright (C) 2020 Harald Seiler + */ + +#include "imx6qdl-dhcom-pdk2-u-boot.dtsi" diff --git a/arch/arm/dts/imx6q-dhcom-pdk2-u-boot.dtsi b/arch/arm/dts/imx6q-dhcom-pdk2-u-boot.dtsi index b94231edb3..026342df5a 100644 --- a/arch/arm/dts/imx6q-dhcom-pdk2-u-boot.dtsi +++ b/arch/arm/dts/imx6q-dhcom-pdk2-u-boot.dtsi @@ -3,6 +3,8 @@ * Copyright (C) 2019 Claudius Heine */ +#include "imx6qdl-dhcom-pdk2-u-boot.dtsi" + / { wdt-reboot { compatible = "wdt-reboot"; diff --git a/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi b/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi new file mode 100644 index 0000000000..a54e421de3 --- /dev/null +++ b/arch/arm/dts/imx6qdl-dhcom-pdk2-u-boot.dtsi @@ -0,0 +1,21 @@ +// SPDX-License-Identifier: (GPL-2.0+) +/* + * Copyright (C) 2020 Harald Seiler + */ + +/ { + fec_vio: regulator-fec { + compatible = "regulator-fixed"; + + regulator-name = "fec-vio"; + gpio = <&gpio1 7 GPIO_ACTIVE_LOW>; + }; +}; + +&fec { + phy-reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>; + phy-reset-duration = <1>; + phy-reset-post-delay = <10>; + + phy-supply = <&fec_vio>; +}; diff --git a/board/dhelectronics/dh_imx6/dh_imx6.c b/board/dhelectronics/dh_imx6/dh_imx6.c index 33ce7e8ff1..b6f8b11a10 100644 --- a/board/dhelectronics/dh_imx6/dh_imx6.c +++ b/board/dhelectronics/dh_imx6/dh_imx6.c @@ -28,10 +28,7 @@ #include #include #include -#include #include -#include -#include #include #include @@ -52,24 +49,6 @@ int overwrite_console(void) return 1; } -#ifdef CONFIG_FEC_MXC -static void eth_phy_reset(void) -{ - /* Reset PHY */ - gpio_direction_output(IMX_GPIO_NR(5, 0) , 0); - udelay(500); - gpio_set_value(IMX_GPIO_NR(5, 0), 1); - - /* Enable VIO */ - gpio_direction_output(IMX_GPIO_NR(1, 7) , 0); - - /* - * KSZ9021 PHY needs at least 10 mSec after PHY reset - * is released to stabilize - */ - mdelay(10); -} - static int setup_fec_clock(void) { struct iomuxc *iomuxc_regs = (struct iomuxc *)IOMUXC_BASE_ADDR; @@ -80,34 +59,6 @@ static int setup_fec_clock(void) return enable_fec_anatop_clock(0, ENET_50MHZ); } -int board_eth_init(bd_t *bis) -{ - uint32_t base = IMX_FEC_BASE; - struct mii_dev *bus = NULL; - struct phy_device *phydev = NULL; - - gpio_request(IMX_GPIO_NR(5, 0), "PHY-reset"); - gpio_request(IMX_GPIO_NR(1, 7), "VIO"); - - setup_fec_clock(); - - eth_phy_reset(); - - bus = fec_get_miibus(base, -1); - if (!bus) - return -EINVAL; - - /* Scan PHY 0 */ - phydev = phy_find_by_mask(bus, 0xf, PHY_INTERFACE_MODE_RGMII); - if (!phydev) { - printf("Ethernet PHY not found!\n"); - return -EINVAL; - } - - return fec_probe(bis, -1, base, bus, phydev); -} -#endif - #ifdef CONFIG_USB_EHCI_MX6 static void setup_usb(void) { @@ -190,6 +141,8 @@ int board_init(void) setup_dhcom_mac_from_fuse(); + setup_fec_clock(); + return 0; } diff --git a/configs/dh_imx6_defconfig b/configs/dh_imx6_defconfig index cbfc3c394e..40de1d8203 100644 --- a/configs/dh_imx6_defconfig +++ b/configs/dh_imx6_defconfig @@ -74,6 +74,8 @@ CONFIG_SPI_FLASH_MTD=y CONFIG_PHYLIB=y CONFIG_PHY_MICREL=y CONFIG_PHY_MICREL_KSZ90X1=y +CONFIG_DM_ETH=y +CONFIG_DM_MDIO=y CONFIG_FEC_MXC=y CONFIG_MII=y CONFIG_PINCTRL=y -- 2.39.5