From 15ca9ebb074e9eca5a8264c93f5678df240fa54d Mon Sep 17 00:00:00 2001 From: Manish Narani Date: Wed, 14 Jul 2021 06:17:19 -0600 Subject: [PATCH] arm64: zynqmp: Move USB3 PHY properties from DWC3 node to USB node Move the PHY properties from DWC3 node to USB node in ZynqMP DTs as here the USB3 PHY used is PSGTR, which is connected to Xilinx USB core. This PHY initialization should be handled from Xilinx USB core as the prerequisite register configurations are done here only. Signed-off-by: Manish Narani Signed-off-by: Michal Simek --- arch/arm/dts/zynqmp-p-a2197-00-revA.dts | 4 ++-- arch/arm/dts/zynqmp-sck-kv-g-revA.dts | 4 ++-- arch/arm/dts/zynqmp-sck-kv-g-revB.dts | 4 ++-- arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts | 4 ++-- arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts | 8 ++++---- arch/arm/dts/zynqmp-zcu100-revC.dts | 8 ++++---- arch/arm/dts/zynqmp-zcu102-revA.dts | 4 ++-- arch/arm/dts/zynqmp-zcu104-revA.dts | 4 ++-- arch/arm/dts/zynqmp-zcu104-revC.dts | 4 ++-- arch/arm/dts/zynqmp-zcu106-revA.dts | 4 ++-- arch/arm/dts/zynqmp-zcu111-revA.dts | 4 ++-- arch/arm/dts/zynqmp-zcu208-revA.dts | 4 ++-- arch/arm/dts/zynqmp-zcu216-revA.dts | 4 ++-- 13 files changed, 30 insertions(+), 30 deletions(-) diff --git a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts index d50b335e67..c893aaaafd 100644 --- a/arch/arm/dts/zynqmp-p-a2197-00-revA.dts +++ b/arch/arm/dts/zynqmp-p-a2197-00-revA.dts @@ -545,6 +545,8 @@ status = "okay"; xlnx,usb-polarity = <0>; xlnx,usb-reset-mode = <0>; + phy-names = "usb3-phy"; + phys = <&psgtr 1 PHY_TYPE_USB3 0 1>; }; &dwc3_0 { @@ -553,8 +555,6 @@ snps,dis_u2_susphy_quirk; snps,dis_u3_susphy_quirk; maximum-speed = "super-speed"; - phy-names = "usb3-phy"; - phys = <&psgtr 1 PHY_TYPE_USB3 0 1>; }; &usb1 { diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts index 59d5751e06..4e8086c82f 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts +++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts @@ -125,6 +125,8 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; usbhub: usb5744 { /* u43 */ compatible = "microchip,usb5744"; reset-gpios = <&gpio 44 GPIO_ACTIVE_HIGH>; @@ -135,8 +137,6 @@ status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts index b5443afff9..048d5665c5 100644 --- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts +++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts @@ -109,14 +109,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 1>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts index b92a2ee3e6..4a87bd6a6a 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm015-dc1.dts @@ -424,14 +424,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts index 344323ab7f..13812470ae 100644 --- a/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts +++ b/arch/arm/dts/zynqmp-zc1751-xm017-dc3.dts @@ -221,27 +221,27 @@ &usb0 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 0 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 0 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; /* ULPI SMSC USB3320 */ &usb1 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; }; &dwc3_1 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 3 PHY_TYPE_USB3 1 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu100-revC.dts b/arch/arm/dts/zynqmp-zcu100-revC.dts index 2d61577478..ea630a43dc 100644 --- a/arch/arm/dts/zynqmp-zcu100-revC.dts +++ b/arch/arm/dts/zynqmp-zcu100-revC.dts @@ -561,13 +561,13 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 0>; }; &dwc3_0 { status = "okay"; dr_mode = "peripheral"; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 0>; maximum-speed = "super-speed"; }; @@ -576,13 +576,13 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb1_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 3 PHY_TYPE_USB3 1 0>; }; &dwc3_1 { status = "okay"; dr_mode = "host"; - phy-names = "usb3-phy"; - phys = <&psgtr 3 PHY_TYPE_USB3 1 0>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu102-revA.dts b/arch/arm/dts/zynqmp-zcu102-revA.dts index c1af5fc635..1b1cabb004 100644 --- a/arch/arm/dts/zynqmp-zcu102-revA.dts +++ b/arch/arm/dts/zynqmp-zcu102-revA.dts @@ -1019,14 +1019,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu104-revA.dts b/arch/arm/dts/zynqmp-zcu104-revA.dts index 7e5eca82fd..9cd30447eb 100644 --- a/arch/arm/dts/zynqmp-zcu104-revA.dts +++ b/arch/arm/dts/zynqmp-zcu104-revA.dts @@ -502,14 +502,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu104-revC.dts b/arch/arm/dts/zynqmp-zcu104-revC.dts index f4ebcbb318..45191569c1 100644 --- a/arch/arm/dts/zynqmp-zcu104-revC.dts +++ b/arch/arm/dts/zynqmp-zcu104-revC.dts @@ -514,14 +514,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu106-revA.dts b/arch/arm/dts/zynqmp-zcu106-revA.dts index ac6689c167..50cc72eb92 100644 --- a/arch/arm/dts/zynqmp-zcu106-revA.dts +++ b/arch/arm/dts/zynqmp-zcu106-revA.dts @@ -1012,14 +1012,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu111-revA.dts b/arch/arm/dts/zynqmp-zcu111-revA.dts index 8d57ca2b3b..2b15ce1ea8 100644 --- a/arch/arm/dts/zynqmp-zcu111-revA.dts +++ b/arch/arm/dts/zynqmp-zcu111-revA.dts @@ -849,14 +849,14 @@ status = "okay"; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_usb0_default>; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu208-revA.dts b/arch/arm/dts/zynqmp-zcu208-revA.dts index d3e20ae85d..32a6e6fb55 100644 --- a/arch/arm/dts/zynqmp-zcu208-revA.dts +++ b/arch/arm/dts/zynqmp-zcu208-revA.dts @@ -692,13 +692,13 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; diff --git a/arch/arm/dts/zynqmp-zcu216-revA.dts b/arch/arm/dts/zynqmp-zcu216-revA.dts index ae7c181968..1e347036d0 100644 --- a/arch/arm/dts/zynqmp-zcu216-revA.dts +++ b/arch/arm/dts/zynqmp-zcu216-revA.dts @@ -696,13 +696,13 @@ /* ULPI SMSC USB3320 */ &usb0 { status = "okay"; + phy-names = "usb3-phy"; + phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; }; &dwc3_0 { status = "okay"; dr_mode = "host"; snps,usb3_lpm_capable; - phy-names = "usb3-phy"; - phys = <&psgtr 2 PHY_TYPE_USB3 0 2>; maximum-speed = "super-speed"; }; -- 2.39.5