From 10a394ba68967eff24ae4c25737d52e18a486f52 Mon Sep 17 00:00:00 2001 From: Alice Guo Date: Fri, 18 Dec 2020 15:19:27 +0800 Subject: [PATCH] board: imx8mp: add boot.cmd for distro boot on iMX8MP Distro Boot requires a U-Boot-specific script named boot.scr or boot.scr.uimg which contains boot commands to boot the system. The boot.cmd is such a file. Use mkimage to generate boot.scr or boot.scr.uimg from boot.cmd, and the command is: mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Distro Boot Script" -d boot.cmd boot.scr.uimg The boot.cmd file is an example script and can be modified based on needs. bootargs is set in this script and root uses the default value "/dev/mmcblk1p2 rootwait rw" which can be changed by overriding mmcroot. Signed-off-by: Alice Guo --- board/freescale/imx8mp_evk/boot.cmd | 25 +++++++++++++++++++++++++ 1 file changed, 25 insertions(+) create mode 100644 board/freescale/imx8mp_evk/boot.cmd diff --git a/board/freescale/imx8mp_evk/boot.cmd b/board/freescale/imx8mp_evk/boot.cmd new file mode 100644 index 0000000000..10bcced774 --- /dev/null +++ b/board/freescale/imx8mp_evk/boot.cmd @@ -0,0 +1,25 @@ +setenv bootargs console=${console} root=${mmcroot}; + +for boot_target in ${boot_targets}; +do + if test "${boot_target}" = "mmc1" ; then + if fatload mmc 1:${mmcpart} ${kernel_addr_r} ${image}; then + if fatload mmc 1:${mmcpart} ${fdt_addr} ${fdt_file}; then + echo Load image and .dtb from SD card(mmc1); + booti ${kernel_addr_r} - ${fdt_addr}; + exit; + fi + fi + fi + + if test "${boot_target}" = "mmc2" ; then + if fatload mmc 2:${mmcpart} ${kernel_addr_r} ${image}; then + if fatload mmc 2:${mmcpart} ${fdt_addr} ${fdt_file}; then + echo Load image and .dtb from eMMC(mmc2); + booti ${kernel_addr_r} - ${fdt_addr}; + exit; + fi + fi + fi + +done -- 2.39.5