From 0fd1359c5a9ba79a6bb408859e3376242a513ae2 Mon Sep 17 00:00:00 2001 From: "Andrew F. Davis" Date: Thu, 17 Jan 2019 13:43:05 -0600 Subject: [PATCH] ARM: mach-omap2: Kconfig: Allow OMAP5 devices to set entry point Like AM33xx and AM43xx, DRA7xx and AM57xx devices may need to have an non-standard boot address in memory. This may be due to the device being a high security variant, which place the Initial SoftWare (ISW) after certificates and secure software. Allow these devices to set this from Kconfig. Signed-off-by: Andrew F. Davis --- arch/arm/mach-omap2/Kconfig | 15 +++++++++++++++ arch/arm/mach-omap2/am33xx/Kconfig | 15 --------------- include/configs/ti_omap5_common.h | 2 +- 3 files changed, 16 insertions(+), 16 deletions(-) diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 58e545a45b..d9bdcb355a 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -167,6 +167,21 @@ config TI_SECURE_EMIF_PROTECTED_REGION_SIZE using hardware memory firewalls. This value must be smaller than the TI_SECURE_EMIF_TOTAL_REGION_SIZE value. +if AM43XX || AM33XX || OMAP54XX +config ISW_ENTRY_ADDR + hex "Address in memory or XIP address of bootloader entry point" + default 0x402F4000 if AM43XX + default 0x402F0400 if AM33XX + default 0x40301350 if OMAP54XX + help + After any reset, the boot ROM searches the boot media for a valid + boot image. For non-XIP devices, the ROM then copies the image into + internal memory. For all boot modes, after the ROM processes the + boot image it eventually computes the entry point address depending + on the device type (secure/non-secure), boot media (xip/non-xip) and + image headers. +endif + source "arch/arm/mach-omap2/omap3/Kconfig" source "arch/arm/mach-omap2/omap4/Kconfig" diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index 57284c4ae1..4f15346c86 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -275,21 +275,6 @@ config SPL_RTC_DDR_SUPPORT endif if AM43XX || AM33XX -config ISW_ENTRY_ADDR - hex "Address in memory or XIP flash of bootloader entry point" - default 0x402F4000 if AM43XX - default 0x402F0400 if AM33XX - help - After any reset, the boot ROM on the AM43XX SOC - searches the boot media for a valid boot image. - For non-XIP devices, the ROM then copies the - image into internal memory. - For all boot modes, after the ROM processes the - boot image it eventually computes the entry - point address depending on the device type - (secure/non-secure), boot media (xip/non-xip) and - image headers. - config PUB_ROM_DATA_SIZE hex "Size in bytes of the L3 SRAM reserved by ROM to store data" default 0x8400 diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h index 8bf4a6b7e9..ba57c40182 100644 --- a/include/configs/ti_omap5_common.h +++ b/include/configs/ti_omap5_common.h @@ -81,7 +81,7 @@ * RAM from address 0x40301350 (0x40300000+0x1000(reserved)+0x350(cert)). */ #define TI_OMAP5_SECURE_BOOT_RESV_SRAM_SZ 0x1000 -#define CONFIG_SPL_TEXT_BASE 0x40301350 +#define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR /* If no specific start address is specified then the secure EMIF * region will be placed at the end of the DDR space. In order to prevent * the main u-boot relocation from clobbering that memory and causing a -- 2.39.5