From 0da35fa8d67415c7d595f6a74952905decc2a911 Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Fri, 11 Mar 2022 09:11:56 -0500 Subject: [PATCH] Convert CONFIG_ARMV7_SECURE_BASE et al to Kconfig This converts the following to Kconfig: CONFIG_ARMV7_SECURE_BASE CONFIG_ARMV7_SECURE_MAX_SIZE CONFIG_ARMV7_SECURE_RESERVE_SIZE Signed-off-by: Tom Rini --- arch/arm/cpu/armv7/Kconfig | 31 ++++++++++++++++++++++++++ configs/Bananapi_M2_Ultra_defconfig | 1 + configs/LicheePi_Zero_defconfig | 1 + configs/bananapi_m2_berry_defconfig | 1 + configs/mx7ulp_evk_defconfig | 1 + configs/mx7ulp_evk_plugin_defconfig | 1 + configs/pg_wcom_expu1_defconfig | 1 + configs/pg_wcom_expu1_update_defconfig | 1 + configs/pg_wcom_seli8_defconfig | 1 + configs/pg_wcom_seli8_update_defconfig | 1 + configs/pinecube_defconfig | 1 + include/configs/apalis-tk1.h | 4 ---- include/configs/cei-tk1-som.h | 4 ---- include/configs/jetson-tk1.h | 4 ---- include/configs/ls1021aiot.h | 2 -- include/configs/ls1021aqds.h | 2 -- include/configs/ls1021atsn.h | 2 -- include/configs/ls1021atwr.h | 2 -- include/configs/mx7_common.h | 2 -- include/configs/mx7ulp_com.h | 2 -- include/configs/stm32mp15_common.h | 6 ----- include/configs/sun6i.h | 7 ------ include/configs/sun7i.h | 7 ------ include/configs/sun8i.h | 10 --------- 24 files changed, 41 insertions(+), 54 deletions(-) diff --git a/arch/arm/cpu/armv7/Kconfig b/arch/arm/cpu/armv7/Kconfig index 2eeef3cba9..f1e4e26b8f 100644 --- a/arch/arm/cpu/armv7/Kconfig +++ b/arch/arm/cpu/armv7/Kconfig @@ -27,6 +27,37 @@ config ARMV7_BOOT_SEC_DEFAULT This can be overridden at run-time by setting the bootm_boot_mode env. variable to "sec" or "nonsec". +config HAS_ARMV7_SECURE_BASE + bool "Enable support for a ahardware secure memory area" + default y if ARCH_LS1021A || ARCH_MX7 || ARCH_MX7ULP || ARCH_STM32MP \ + || MACH_SUN6I || MACH_SUN7I || MACH_SUN8I || TEGRA124 + +config ARMV7_SECURE_BASE + hex "Base address for secure mode memory" + depends on HAS_ARMV7_SECURE_BASE + default 0xfff00000 if TEGRA124 + default 0x2ffc0000 if ARCH_STM32MP + default 0x2f000000 if ARCH_MX7ULP + default 0x10010000 if ARCH_LS1021A + default 0x00900000 if ARCH_MX7 + default 0x00044000 if MACH_SUN8I + default 0x00020000 if MACH_SUN6I || MACH_SUN7I + +config ARMV7_SECURE_RESERVE_SIZE + hex + depends on TEGRA124 && HAS_ARMV7_SECURE_BASE + default 0x100000 + help + Reserve top 1M for secure RAM + +config ARMV7_SECURE_MAX_SIZE + hex + depends on ARMV7_SECURE_BASE && ARCH_STM32MP || MACH_SUN6I \ + || MACH_SUN7I || MACH_SUN8I + default 0xbc00 if MACH_SUN8I && !MACH_SUN8I_H3 + default 0x3c00 if MACH_SUN8I && MACH_SUN8I_H3 + default 0x10000 + config ARMV7_VIRT bool "Enable support for hardware virtualization" if EXPERT depends on CPU_V7_HAS_VIRT && ARMV7_NONSEC diff --git a/configs/Bananapi_M2_Ultra_defconfig b/configs/Bananapi_M2_Ultra_defconfig index 8917af3c93..a66aef0755 100644 --- a/configs/Bananapi_M2_Ultra_defconfig +++ b/configs/Bananapi_M2_Ultra_defconfig @@ -9,6 +9,7 @@ CONFIG_MMC0_CD_PIN="PH13" CONFIG_MMC_SUNXI_SLOT_EXTRA=2 CONFIG_USB1_VBUS_PIN="PH23" CONFIG_USB2_VBUS_PIN="PH23" +# CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/LicheePi_Zero_defconfig b/configs/LicheePi_Zero_defconfig index b50bae9bbd..9815348bad 100644 --- a/configs/LicheePi_Zero_defconfig +++ b/configs/LicheePi_Zero_defconfig @@ -4,4 +4,5 @@ CONFIG_DEFAULT_DEVICE_TREE="sun8i-v3s-licheepi-zero" CONFIG_SPL=y CONFIG_MACH_SUN8I_V3S=y CONFIG_DRAM_CLK=360 +# CONFIG_HAS_ARMV7_SECURE_BASE is not set # CONFIG_NETDEVICES is not set diff --git a/configs/bananapi_m2_berry_defconfig b/configs/bananapi_m2_berry_defconfig index 2d65d0fd19..a35fcdb64e 100644 --- a/configs/bananapi_m2_berry_defconfig +++ b/configs/bananapi_m2_berry_defconfig @@ -6,6 +6,7 @@ CONFIG_MACH_SUN8I_R40=y CONFIG_DRAM_CLK=576 CONFIG_MMC0_CD_PIN="PH13" CONFIG_USB1_VBUS_PIN="PH23" +# CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_AHCI=y # CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set CONFIG_SPL_I2C=y diff --git a/configs/mx7ulp_evk_defconfig b/configs/mx7ulp_evk_defconfig index 4f641471ac..192e9df2e4 100644 --- a/configs/mx7ulp_evk_defconfig +++ b/configs/mx7ulp_evk_defconfig @@ -10,6 +10,7 @@ CONFIG_ENV_OFFSET=0xC0000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk" CONFIG_TARGET_MX7ULP_EVK=y +# CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_SYS_LOAD_ADDR=0x60800000 CONFIG_OF_BOARD_SETUP=y CONFIG_USE_BOOTCOMMAND=y diff --git a/configs/mx7ulp_evk_plugin_defconfig b/configs/mx7ulp_evk_plugin_defconfig index 0f8e9e886e..a152c6e93a 100644 --- a/configs/mx7ulp_evk_plugin_defconfig +++ b/configs/mx7ulp_evk_plugin_defconfig @@ -10,6 +10,7 @@ CONFIG_ENV_OFFSET=0xC0000 CONFIG_DM_GPIO=y CONFIG_DEFAULT_DEVICE_TREE="imx7ulp-evk" CONFIG_TARGET_MX7ULP_EVK=y +# CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_SYS_LOAD_ADDR=0x60800000 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loadimage; then run mmcboot; fi; fi; fi" diff --git a/configs/pg_wcom_expu1_defconfig b/configs/pg_wcom_expu1_defconfig index 648cb2c840..04b8d26c8e 100644 --- a/configs/pg_wcom_expu1_defconfig +++ b/configs/pg_wcom_expu1_defconfig @@ -21,6 +21,7 @@ CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-expu1" CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020 CONFIG_SYS_CLK_FREQ=66666666 +# CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x82000000 diff --git a/configs/pg_wcom_expu1_update_defconfig b/configs/pg_wcom_expu1_update_defconfig index f4895553d2..351bc83803 100644 --- a/configs/pg_wcom_expu1_update_defconfig +++ b/configs/pg_wcom_expu1_update_defconfig @@ -19,6 +19,7 @@ CONFIG_SYS_I2C_MXC_I2C3=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-expu1" CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020 +# CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x82000000 diff --git a/configs/pg_wcom_seli8_defconfig b/configs/pg_wcom_seli8_defconfig index bca016314e..8e54fa5d57 100644 --- a/configs/pg_wcom_seli8_defconfig +++ b/configs/pg_wcom_seli8_defconfig @@ -21,6 +21,7 @@ CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-seli8" CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020 CONFIG_SYS_CLK_FREQ=66666666 +# CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x82000000 diff --git a/configs/pg_wcom_seli8_update_defconfig b/configs/pg_wcom_seli8_update_defconfig index af1812b67d..1ca468afa6 100644 --- a/configs/pg_wcom_seli8_update_defconfig +++ b/configs/pg_wcom_seli8_update_defconfig @@ -19,6 +19,7 @@ CONFIG_SYS_I2C_MXC_I2C3=y CONFIG_DEFAULT_DEVICE_TREE="ls1021a-pg-wcom-seli8" CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SYS_BOOTCOUNT_ADDR=0x70000020 +# CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_AHCI=y CONFIG_DISTRO_DEFAULTS=y CONFIG_SYS_LOAD_ADDR=0x82000000 diff --git a/configs/pinecube_defconfig b/configs/pinecube_defconfig index e779663a0d..28e347b4d9 100644 --- a/configs/pinecube_defconfig +++ b/configs/pinecube_defconfig @@ -7,6 +7,7 @@ CONFIG_SUNXI_DRAM_DDR3_1333=y CONFIG_DRAM_CLK=504 CONFIG_DRAM_ODT_EN=y CONFIG_I2C0_ENABLE=y +# CONFIG_HAS_ARMV7_SECURE_BASE is not set CONFIG_SPL_I2C=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h index 57192649ec..da935f77b9 100644 --- a/include/configs/apalis-tk1.h +++ b/include/configs/apalis-tk1.h @@ -114,8 +114,4 @@ #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" -/* Reserve top 1M for secure RAM */ -#define CONFIG_ARMV7_SECURE_BASE 0xfff00000 -#define CONFIG_ARMV7_SECURE_RESERVE_SIZE 0x00100000 - #endif /* __CONFIG_H */ diff --git a/include/configs/cei-tk1-som.h b/include/configs/cei-tk1-som.h index 2c406d3186..1cc8609102 100644 --- a/include/configs/cei-tk1-som.h +++ b/include/configs/cei-tk1-som.h @@ -28,8 +28,4 @@ #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" -/* Reserve top 1M for secure RAM */ -#define CONFIG_ARMV7_SECURE_BASE 0xfff00000 -#define CONFIG_ARMV7_SECURE_RESERVE_SIZE 0x00100000 - #endif /* __CONFIG_H */ diff --git a/include/configs/jetson-tk1.h b/include/configs/jetson-tk1.h index a3c385b6e2..b4c42fd372 100644 --- a/include/configs/jetson-tk1.h +++ b/include/configs/jetson-tk1.h @@ -26,8 +26,4 @@ #include "tegra-common-usb-gadget.h" #include "tegra-common-post.h" -/* Reserve top 1M for secure RAM */ -#define CONFIG_ARMV7_SECURE_BASE 0xfff00000 -#define CONFIG_ARMV7_SECURE_RESERVE_SIZE 0x00100000 - #endif /* __CONFIG_H */ diff --git a/include/configs/ls1021aiot.h b/include/configs/ls1021aiot.h index 4e5228aa21..810eee895b 100644 --- a/include/configs/ls1021aiot.h +++ b/include/configs/ls1021aiot.h @@ -7,8 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR - #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR #define CONFIG_SYS_INIT_RAM_SIZE OCRAM_SIZE diff --git a/include/configs/ls1021aqds.h b/include/configs/ls1021aqds.h index b6501e87b4..27a074c745 100644 --- a/include/configs/ls1021aqds.h +++ b/include/configs/ls1021aqds.h @@ -7,8 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR - #define CONFIG_DEEP_SLEEP #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR diff --git a/include/configs/ls1021atsn.h b/include/configs/ls1021atsn.h index 824078dd27..3742203278 100644 --- a/include/configs/ls1021atsn.h +++ b/include/configs/ls1021atsn.h @@ -6,8 +6,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR - #define CONFIG_DEEP_SLEEP #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR diff --git a/include/configs/ls1021atwr.h b/include/configs/ls1021atwr.h index fada8aa61d..a2e4c80bd9 100644 --- a/include/configs/ls1021atwr.h +++ b/include/configs/ls1021atwr.h @@ -7,8 +7,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -#define CONFIG_ARMV7_SECURE_BASE OCRAM_BASE_S_ADDR - #define CONFIG_DEEP_SLEEP #define CONFIG_SYS_INIT_RAM_ADDR OCRAM_BASE_ADDR diff --git a/include/configs/mx7_common.h b/include/configs/mx7_common.h index 2e976df698..76c374af25 100644 --- a/include/configs/mx7_common.h +++ b/include/configs/mx7_common.h @@ -31,8 +31,6 @@ /* MMC */ -#define CONFIG_ARMV7_SECURE_BASE 0x00900000 - /* * If we have defined the OPTEE ram size and not OPTEE it means that we were * launched by OPTEE, because of that we shall skip all the low level diff --git a/include/configs/mx7ulp_com.h b/include/configs/mx7ulp_com.h index 319de9b014..d3ba144927 100644 --- a/include/configs/mx7ulp_com.h +++ b/include/configs/mx7ulp_com.h @@ -70,7 +70,5 @@ #define CONFIG_SYS_INIT_SP_ADDR \ (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET) -#define CONFIG_ARMV7_SECURE_BASE 0x2F000000 - #define CONFIG_MXC_USB_PORTSC (PORT_PTS_UTMI | PORT_PTS_PTW) #endif /* __CONFIG_H */ diff --git a/include/configs/stm32mp15_common.h b/include/configs/stm32mp15_common.h index 175d546a15..6b40cdb017 100644 --- a/include/configs/stm32mp15_common.h +++ b/include/configs/stm32mp15_common.h @@ -10,12 +10,6 @@ #include #include -#ifdef CONFIG_ARMV7_PSCI -/* PSCI support */ -#define CONFIG_ARMV7_SECURE_BASE STM32_SYSRAM_BASE -#define CONFIG_ARMV7_SECURE_MAX_SIZE STM32_SYSRAM_SIZE -#endif - /* * Configuration of the external SRAM memory used by U-Boot */ diff --git a/include/configs/sun6i.h b/include/configs/sun6i.h index 1e490daac1..0b1fedda10 100644 --- a/include/configs/sun6i.h +++ b/include/configs/sun6i.h @@ -10,13 +10,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * A31 specific configuration - */ - -#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE -#define CONFIG_ARMV7_SECURE_MAX_SIZE (64 * 1024) /* 64 KB */ - /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sun7i.h b/include/configs/sun7i.h index 803a7514cc..bc2779fa26 100644 --- a/include/configs/sun7i.h +++ b/include/configs/sun7i.h @@ -8,13 +8,6 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* - * A20 specific configuration - */ - -#define CONFIG_ARMV7_SECURE_BASE SUNXI_SRAM_B_BASE -#define CONFIG_ARMV7_SECURE_MAX_SIZE (64 * 1024) /* 64 KB */ - /* * Include common sunxi configuration where most the settings are */ diff --git a/include/configs/sun8i.h b/include/configs/sun8i.h index 5636356366..106139d090 100644 --- a/include/configs/sun8i.h +++ b/include/configs/sun8i.h @@ -14,16 +14,6 @@ #include -#ifdef SUNXI_SRAM_A2_SIZE -/* - * If the SoC has enough SRAM A2, use that for the secure monitor. - * Skip the first 16 KiB of SRAM A2, which is not usable, as only certain bytes - * are writable. Reserve the last 17 KiB for the resume shim and SCP firmware. - */ -#define CONFIG_ARMV7_SECURE_BASE (SUNXI_SRAM_A2_BASE + 16 * 1024) -#define CONFIG_ARMV7_SECURE_MAX_SIZE (SUNXI_SRAM_A2_SIZE - 33 * 1024) -#endif - /* * Include common sunxi configuration where most the settings are */ -- 2.39.5