From 091442993c0f3ac8f34d15099a207a078dc56d0c Mon Sep 17 00:00:00 2001 From: Andre Przywara Date: Tue, 13 Jun 2023 23:35:06 +0100 Subject: [PATCH] net: sunxi_emac: chase DT nodes to find PHY regulator At the moment the sun4i EMAC driver relies on hardcoded CONFIG_MACPWR Kconfig symbols to enable potential PHY regulators. As we want to get rid of those, we need to find the regulator by chasing up the DT. The sun4i-emac binding puts the PHY regulator into the MDIO node, which is the parent of the PHY device. U-Boot does not have (and does not need) an MDIO driver, so we need to chase down the regulator through the EMAC node: we follow the "phy-handle" property to find the PHY node, then go up to its parent, where we find the "phy-supply" link to the regulator. Let U-Boot find the associated regulator device, and put that into the private device struct, so we can find and enable the regulator at probe time, later. Signed-off-by: Andre Przywara Reviewed-by: Sam Edwards Reviewed-by: Samuel Holland --- drivers/net/sunxi_emac.c | 38 ++++++++++++++++++++++++++++++++++++++ 1 file changed, 38 insertions(+) diff --git a/drivers/net/sunxi_emac.c b/drivers/net/sunxi_emac.c index 4c90d4b498..b599b84852 100644 --- a/drivers/net/sunxi_emac.c +++ b/drivers/net/sunxi_emac.c @@ -17,6 +17,7 @@ #include #include #include +#include /* EMAC register */ struct emac_regs { @@ -165,6 +166,7 @@ struct emac_eth_dev { struct phy_device *phydev; int link_printed; uchar rx_buf[EMAC_RX_BUFSIZE]; + struct udevice *phy_reg; }; struct emac_rxhdr { @@ -572,6 +574,9 @@ static int sunxi_emac_eth_probe(struct udevice *dev) if (ret) return ret; + if (priv->phy_reg) + regulator_set_enable(priv->phy_reg, true); + return sunxi_emac_init_phy(priv, dev); } @@ -585,9 +590,42 @@ static const struct eth_ops sunxi_emac_eth_ops = { static int sunxi_emac_eth_of_to_plat(struct udevice *dev) { struct eth_pdata *pdata = dev_get_plat(dev); + struct emac_eth_dev *priv = dev_get_priv(dev); + struct ofnode_phandle_args args; + ofnode phy_node, mdio_node; + int ret; pdata->iobase = dev_read_addr(dev); + phy_node = dev_get_phy_node(dev); + if (phy_node == ofnode_null()) { + dev_err(dev, "failed to get PHY node\n"); + return ret; + } + /* + * The PHY regulator is in the MDIO node, not the EMAC or PHY node. + * U-Boot does not have (and does not need) a device driver for the + * MDIO device, so just "pass through" that DT node to get to the + * regulator phandle. + * The PHY regulator is optional, though: ignore if we cannot find + * a phy-supply property. + */ + mdio_node = ofnode_get_parent(phy_node); + ret= ofnode_parse_phandle_with_args(mdio_node, "phy-supply", NULL, 0, 0, + &args); + if (ret && ret != -ENOENT) { + dev_err(dev, "failed to get PHY supply node\n"); + return ret; + } + if (!ret) { + ret = uclass_get_device_by_ofnode(UCLASS_REGULATOR, args.node, + &priv->phy_reg); + if (ret) { + dev_err(dev, "failed to get PHY regulator node\n"); + return ret; + } + } + return 0; } -- 2.39.5