From 068d4c0a11e43cce6e819e19884b49a8bc4e1722 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Mon, 25 Mar 2019 10:34:00 +0000 Subject: [PATCH] pinctrl: at91: add slewrate support for SAM9X60 Add slew rate support for SAM9X60 pin controller. Signed-off-by: Claudiu Beznea --- drivers/pinctrl/pinctrl-at91.c | 34 ++++++++++++++++++++++++++++++ include/dt-bindings/pinctrl/at91.h | 4 ++++ 2 files changed, 38 insertions(+) diff --git a/drivers/pinctrl/pinctrl-at91.c b/drivers/pinctrl/pinctrl-at91.c index 62ee7668ab..27f274ff02 100644 --- a/drivers/pinctrl/pinctrl-at91.c +++ b/drivers/pinctrl/pinctrl-at91.c @@ -37,6 +37,9 @@ struct at91_pinctrl_priv { #define OUTPUT BIT(7) #define OUTPUT_VAL_SHIFT 8 #define OUTPUT_VAL (0x1 << OUTPUT_VAL_SHIFT) +#define SLEWRATE_SHIFT 9 +#define SLEWRATE_MASK 0x1 +#define SLEWRATE (SLEWRATE_MASK << SLEWRATE_SHIFT) #define DEBOUNCE BIT(16) #define DEBOUNCE_VAL_SHIFT 17 #define DEBOUNCE_VAL (0x3fff << DEBOUNCE_VAL_SHIFT) @@ -60,6 +63,13 @@ enum drive_strength_bit { #define DRIVE_STRENGTH_BIT_MSK(name) (DRIVE_STRENGTH_BIT_##name << \ DRIVE_STRENGTH_SHIFT) +enum slewrate_bit { + SLEWRATE_BIT_DIS, + SLEWRATE_BIT_ENA, +}; + +#define SLEWRATE_BIT_MSK(name) (SLEWRATE_BIT_##name << SLEWRATE_SHIFT) + enum at91_mux { AT91_MUX_GPIO = 0, AT91_MUX_PERIPH_A = 1, @@ -95,6 +105,7 @@ struct at91_pinctrl_mux_ops { void (*disable_schmitt_trig)(struct at91_port *pio, u32 mask); void (*set_drivestrength)(struct at91_port *pio, u32 pin, u32 strength); + void (*set_slewrate)(struct at91_port *pio, u32 pin, u32 slewrate); }; static u32 two_bit_pin_value_shift_amount(u32 pin) @@ -270,6 +281,25 @@ static void at91_mux_sam9x60_set_drivestrength(struct at91_port *pio, u32 pin, writel(tmp, reg); } +static void at91_mux_sam9x60_set_slewrate(struct at91_port *pio, u32 pin, + u32 setting) +{ + void *reg = &pio->reserved12[3]; + u32 tmp; + + if (setting < SLEWRATE_BIT_DIS || setting > SLEWRATE_BIT_ENA) + return; + + tmp = readl(reg); + + if (setting == SLEWRATE_BIT_DIS) + tmp &= ~BIT(pin); + else + tmp |= BIT(pin); + + writel(tmp, reg); +} + static struct at91_pinctrl_mux_ops at91rm9200_ops = { .mux_A_periph = at91_mux_set_A_periph, .mux_B_periph = at91_mux_set_B_periph, @@ -310,6 +340,7 @@ static struct at91_pinctrl_mux_ops sam9x60_ops = { .set_pulldown = at91_mux_pio3_set_pulldown, .disable_schmitt_trig = at91_mux_pio3_disable_schmitt_trig, .set_drivestrength = at91_mux_sam9x60_set_drivestrength, + .set_slewrate = at91_mux_sam9x60_set_slewrate, }; static void at91_mux_gpio_disable(struct at91_port *pio, u32 mask) @@ -378,6 +409,9 @@ static int at91_pinconf_set(struct at91_pinctrl_mux_ops *ops, if (ops->set_drivestrength) ops->set_drivestrength(pio, pin, (config & DRIVE_STRENGTH) >> DRIVE_STRENGTH_SHIFT); + if (ops->set_slewrate) + ops->set_slewrate(pio, pin, + (config & SLEWRATE) >> SLEWRATE_SHIFT); return 0; } diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h index 2732d6c0fb..616f5ce400 100644 --- a/include/dt-bindings/pinctrl/at91.h +++ b/include/dt-bindings/pinctrl/at91.h @@ -17,6 +17,7 @@ #define AT91_PINCTRL_DIS_SCHMIT (1 << 4) #define AT91_PINCTRL_OUTPUT (1 << 7) #define AT91_PINCTRL_OUTPUT_VAL(x) ((x & 0x1) << 8) +#define AT91_PINCTRL_SLEWRATE (1 << 9) #define AT91_PINCTRL_DEBOUNCE (1 << 16) #define AT91_PINCTRL_DEBOUNCE_VAL(x) (x << 17) @@ -27,6 +28,9 @@ #define AT91_PINCTRL_DRIVE_STRENGTH_MED (0x2 << 5) #define AT91_PINCTRL_DRIVE_STRENGTH_HI (0x3 << 5) +#define AT91_PINCTRL_SLEWRATE_DIS (0x0 << 9) +#define AT91_PINCTRL_SLEWRATE_ENA (0x1 << 9) + #define AT91_PIOA 0 #define AT91_PIOB 1 #define AT91_PIOC 2 -- 2.39.5