From 055626acba2754d3311204ad361b1828a4f8aaf6 Mon Sep 17 00:00:00 2001 From: Thomas Chou Date: Sat, 23 Aug 2014 09:10:34 +0800 Subject: [PATCH] nios2: remove EPCS driver The Altera EPCS is SPI flash. We have been using SPI flash driver to access EPCS for years. The old EPCS driver could be removed. Signed-off-by: Thomas Chou --- arch/nios2/cpu/Makefile | 2 +- arch/nios2/cpu/epcs.c | 717 ---------------------------------------- include/nios2-epcs.h | 60 ---- 3 files changed, 1 insertion(+), 778 deletions(-) delete mode 100644 arch/nios2/cpu/epcs.c delete mode 100644 include/nios2-epcs.h diff --git a/arch/nios2/cpu/Makefile b/arch/nios2/cpu/Makefile index bdd983d3f1..3fe7847160 100644 --- a/arch/nios2/cpu/Makefile +++ b/arch/nios2/cpu/Makefile @@ -7,5 +7,5 @@ extra-y = start.o obj-y = exceptions.o -obj-y += cpu.o interrupts.o sysid.o traps.o epcs.o +obj-y += cpu.o interrupts.o sysid.o traps.o obj-y += fdt.o diff --git a/arch/nios2/cpu/epcs.c b/arch/nios2/cpu/epcs.c deleted file mode 100644 index 9758552447..0000000000 --- a/arch/nios2/cpu/epcs.c +++ /dev/null @@ -1,717 +0,0 @@ -/* - * (C) Copyright 2004, Psyent Corporation - * Scott McNutt - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include - -#if defined(CONFIG_SYS_NIOS_EPCSBASE) -#include -#include -#include -#include - - -/*-----------------------------------------------------------------------*/ -#define SHORT_HELP\ - "epcs - read/write Cyclone EPCS configuration device.\n" - -#define LONG_HELP\ - "\n"\ - "epcs erase start [end]\n"\ - " - erase sector start or sectors start through end.\n"\ - "epcs info\n"\ - " - display EPCS device information.\n"\ - "epcs protect on | off\n"\ - " - turn device protection on or off.\n"\ - "epcs read addr offset count\n"\ - " - read count bytes from offset to addr.\n"\ - "epcs write addr offset count\n"\ - " - write count bytes to offset from addr.\n"\ - "epcs verify addr offset count\n"\ - " - verify count bytes at offset from addr." - - -/*-----------------------------------------------------------------------*/ -/* Operation codes for serial configuration devices - */ -#define EPCS_WRITE_ENA 0x06 /* Write enable */ -#define EPCS_WRITE_DIS 0x04 /* Write disable */ -#define EPCS_READ_STAT 0x05 /* Read status */ -#define EPCS_READ_BYTES 0x03 /* Read bytes */ -#define EPCS_READ_ID 0xab /* Read silicon id */ -#define EPCS_WRITE_STAT 0x01 /* Write status */ -#define EPCS_WRITE_BYTES 0x02 /* Write bytes */ -#define EPCS_ERASE_BULK 0xc7 /* Erase entire device */ -#define EPCS_ERASE_SECT 0xd8 /* Erase sector */ - -/* Device status register bits - */ -#define EPCS_STATUS_WIP (1<<0) /* Write in progress */ -#define EPCS_STATUS_WEL (1<<1) /* Write enable latch */ - -/* Misc - */ -#define EPCS_TIMEOUT 100 /* 100 msec timeout */ - -static nios_spi_t *epcs = (nios_spi_t *)CONFIG_SYS_NIOS_EPCSBASE; - -/*********************************************************************** - * Device access - ***********************************************************************/ -static int epcs_cs (int assert) -{ - ulong start; - unsigned tmp; - - - if (assert) { - tmp = readl (&epcs->control); - writel (tmp | NIOS_SPI_SSO, &epcs->control); - } else { - /* Let all bits shift out */ - start = get_timer (0); - while ((readl (&epcs->status) & NIOS_SPI_TMT) == 0) - if (get_timer (start) > EPCS_TIMEOUT) - return (-1); - tmp = readl (&epcs->control); - writel (tmp & ~NIOS_SPI_SSO, &epcs->control); - } - return (0); -} - -static int epcs_tx (unsigned char c) -{ - ulong start; - - start = get_timer (0); - while ((readl (&epcs->status) & NIOS_SPI_TRDY) == 0) - if (get_timer (start) > EPCS_TIMEOUT) - return (-1); - writel (c, &epcs->txdata); - return (0); -} - -static int epcs_rx (void) -{ - ulong start; - - start = get_timer (0); - while ((readl (&epcs->status) & NIOS_SPI_RRDY) == 0) - if (get_timer (start) > EPCS_TIMEOUT) - return (-1); - return (readl (&epcs->rxdata)); -} - -static unsigned char bitrev[] = { - 0x00, 0x08, 0x04, 0x0c, 0x02, 0x0a, 0x06, 0x0e, - 0x01, 0x09, 0x05, 0x0d, 0x03, 0x0b, 0x07, 0x0f -}; - -static unsigned char epcs_bitrev (unsigned char c) -{ - unsigned char val; - - val = bitrev[c>>4]; - val |= bitrev[c & 0x0f]<<4; - return (val); -} - -static void epcs_rcv (unsigned char *dst, int len) -{ - while (len--) { - epcs_tx (0); - *dst++ = epcs_rx (); - } -} - -static void epcs_rrcv (unsigned char *dst, int len) -{ - while (len--) { - epcs_tx (0); - *dst++ = epcs_bitrev (epcs_rx ()); - } -} - -static void epcs_snd (unsigned char *src, int len) -{ - while (len--) { - epcs_tx (*src++); - epcs_rx (); - } -} - -static void epcs_rsnd (unsigned char *src, int len) -{ - while (len--) { - epcs_tx (epcs_bitrev (*src++)); - epcs_rx (); - } -} - -static void epcs_wr_enable (void) -{ - epcs_cs (1); - epcs_tx (EPCS_WRITE_ENA); - epcs_rx (); - epcs_cs (0); -} - -static unsigned char epcs_status_rd (void) -{ - unsigned char status; - - epcs_cs (1); - epcs_tx (EPCS_READ_STAT); - epcs_rx (); - epcs_tx (0); - status = epcs_rx (); - epcs_cs (0); - return (status); -} - -static void epcs_status_wr (unsigned char status) -{ - epcs_wr_enable (); - epcs_cs (1); - epcs_tx (EPCS_WRITE_STAT); - epcs_rx (); - epcs_tx (status); - epcs_rx (); - epcs_cs (0); - return; -} - -/*********************************************************************** - * Device information - ***********************************************************************/ - -static struct epcs_devinfo_t devinfo[] = { - { "EPCS1 ", 0x10, 17, 4, 15, 8, 0x0c }, - { "EPCS4 ", 0x12, 19, 8, 16, 8, 0x1c }, - { "EPCS16", 0x14, 21, 32, 16, 8, 0x1c }, - { "EPCS64", 0x16, 23,128, 16, 8, 0x1c }, - { 0, 0, 0, 0, 0, 0 } -}; - -int epcs_reset (void) -{ - /* When booting from an epcs controller, the epcs bootrom - * code may leave the slave select in an asserted state. - * This causes two problems: (1) The initial epcs access - * will fail -- not a big deal, and (2) a software reset - * will cause the bootrom code to hang since it does not - * ensure the select is negated prior to first access -- a - * big deal. Here we just negate chip select and everything - * gets better :-) - */ - epcs_cs (0); /* Negate chip select */ - return (0); -} - -epcs_devinfo_t *epcs_dev_find (void) -{ - unsigned char buf[4]; - unsigned char id; - int i; - struct epcs_devinfo_t *dev = NULL; - - /* Read silicon id requires 3 "dummy bytes" before it's put - * on the wire. - */ - buf[0] = EPCS_READ_ID; - buf[1] = 0; - buf[2] = 0; - buf[3] = 0; - - epcs_cs (1); - epcs_snd (buf,4); - epcs_rcv (buf,1); - if (epcs_cs (0) == -1) - return (NULL); - id = buf[0]; - - /* Find the info struct */ - i = 0; - while (devinfo[i].name) { - if (id == devinfo[i].id) { - dev = &devinfo[i]; - break; - } - i++; - } - - return (dev); -} - -/*********************************************************************** - * Misc Utilities - ***********************************************************************/ -int epcs_cfgsz (void) -{ - int sz = 0; - unsigned char buf[128]; - unsigned char *p; - struct epcs_devinfo_t *dev = epcs_dev_find (); - - if (!dev) - return (-1); - - /* Read in the first 128 bytes of the device */ - buf[0] = EPCS_READ_BYTES; - buf[1] = 0; - buf[2] = 0; - buf[3] = 0; - - epcs_cs (1); - epcs_snd (buf,4); - epcs_rrcv (buf, sizeof(buf)); - epcs_cs (0); - - /* Search for the starting 0x6a which is followed by the - * 4-byte 'register' and 4-byte bit-count. - */ - p = buf; - while (p < buf + sizeof(buf)-8) { - if ( *p == 0x6a ) { - /* Point to bit count and extract */ - p += 5; - sz = *p++; - sz |= *p++ << 8; - sz |= *p++ << 16; - sz |= *p++ << 24; - /* Convert to byte count */ - sz += 7; - sz >>= 3; - } else if (*p == 0xff) { - /* 0xff is ok ... just skip */ - p++; - continue; - } else { - /* Not 0xff or 0x6a ... something's not - * right ... report 'unknown' (sz=0). - */ - break; - } - } - return (sz); -} - -int epcs_erase (unsigned start, unsigned end) -{ - unsigned off, sectsz; - unsigned char buf[4]; - struct epcs_devinfo_t *dev = epcs_dev_find (); - - if (!dev || (start>end)) - return (-1); - - /* Erase the requested sectors. An address is required - * that lies within the requested sector -- we'll just - * use the first address in the sector. - */ - printf ("epcs erasing sector %d ", start); - if (start != end) - printf ("to %d ", end); - sectsz = (1 << dev->sz_sect); - while (start <= end) { - off = start * sectsz; - start++; - - buf[0] = EPCS_ERASE_SECT; - buf[1] = off >> 16; - buf[2] = off >> 8; - buf[3] = off; - - epcs_wr_enable (); - epcs_cs (1); - epcs_snd (buf,4); - epcs_cs (0); - - printf ("."); /* Some user feedback */ - - /* Wait for erase to complete */ - while (epcs_status_rd() & EPCS_STATUS_WIP) - ; - } - printf (" done.\n"); - return (0); -} - -int epcs_read (ulong addr, ulong off, ulong cnt) -{ - unsigned char buf[4]; - struct epcs_devinfo_t *dev = epcs_dev_find (); - - if (!dev) - return (-1); - - buf[0] = EPCS_READ_BYTES; - buf[1] = off >> 16; - buf[2] = off >> 8; - buf[3] = off; - - epcs_cs (1); - epcs_snd (buf,4); - epcs_rrcv ((unsigned char *)addr, cnt); - epcs_cs (0); - - return (0); -} - -int epcs_write (ulong addr, ulong off, ulong cnt) -{ - ulong wrcnt; - unsigned pgsz; - unsigned char buf[4]; - struct epcs_devinfo_t *dev = epcs_dev_find (); - - if (!dev) - return (-1); - - pgsz = (1<sz_page); - while (cnt) { - if (off % pgsz) - wrcnt = pgsz - (off % pgsz); - else - wrcnt = pgsz; - wrcnt = (wrcnt > cnt) ? cnt : wrcnt; - - buf[0] = EPCS_WRITE_BYTES; - buf[1] = off >> 16; - buf[2] = off >> 8; - buf[3] = off; - - epcs_wr_enable (); - epcs_cs (1); - epcs_snd (buf,4); - epcs_rsnd ((unsigned char *)addr, wrcnt); - epcs_cs (0); - - /* Wait for write to complete */ - while (epcs_status_rd() & EPCS_STATUS_WIP) - ; - - cnt -= wrcnt; - off += wrcnt; - addr += wrcnt; - } - - return (0); -} - -int epcs_verify (ulong addr, ulong off, ulong cnt, ulong *err) -{ - ulong rdcnt; - unsigned char buf[256]; - unsigned char *start,*end; - int i; - - start = end = (unsigned char *)addr; - while (cnt) { - rdcnt = (cnt>sizeof(buf)) ? sizeof(buf) : cnt; - epcs_read ((ulong)buf, off, rdcnt); - for (i=0; isz_sect); - off = sectsz * sect; - end = off + sectsz; - - while (off < end) { - epcs_read ((ulong)buf, off, sizeof(buf)); - for (i=0; i < sizeof(buf); i++) { - if (buf[i] != 0xff) { - *offset = off + i; - return (0); - } - } - off += sizeof(buf); - } - return (1); -} - - -/*********************************************************************** - * Commands - ***********************************************************************/ -static -void do_epcs_info (struct epcs_devinfo_t *dev, int argc, char * const argv[]) -{ - int i; - unsigned char stat; - unsigned tmp; - int erased; - - /* Basic device info */ - printf ("%s: %d kbytes (%d sectors x %d kbytes," - " %d bytes/page)\n", - dev->name, 1 << (dev->size-10), - dev->num_sects, 1 << (dev->sz_sect-10), - 1 << dev->sz_page ); - - /* Status -- for now protection is all-or-nothing */ - stat = epcs_status_rd(); - printf ("status: 0x%02x (WIP:%d, WEL:%d, PROT:%s)\n", - stat, - (stat & EPCS_STATUS_WIP) ? 1 : 0, - (stat & EPCS_STATUS_WEL) ? 1 : 0, - (stat & dev->prot_mask) ? "on" : "off" ); - - /* Configuration */ - tmp = epcs_cfgsz (); - if (tmp) { - printf ("config: 0x%06x (%d) bytes\n", tmp, tmp ); - } else { - printf ("config: unknown\n" ); - } - - /* Sector info */ - for (i=0; (i < dev->num_sects) && (argc > 1); i++) { - erased = epcs_sect_erased (i, &tmp, dev); - if ((i & 0x03) == 0) printf ("\n"); - printf ("%4d: %07x ", - i, i*(1<sz_sect) ); - if (erased) - printf ("E "); - else - printf (" "); - } - printf ("\n"); - - return; -} - -static -void do_epcs_erase (struct epcs_devinfo_t *dev, int argc, char * const argv[]) -{ - unsigned start,end; - - if ((argc < 3) || (argc > 4)) { - printf ("USAGE: epcs erase sect [end]\n"); - return; - } - if ((epcs_status_rd() & dev->prot_mask) != 0) { - printf ( "epcs: device protected.\n"); - return; - } - - start = simple_strtoul (argv[2], NULL, 10); - if (argc > 3) - end = simple_strtoul (argv[3], NULL, 10); - else - end = start; - if ((start >= dev->num_sects) || (start > end)) { - printf ("epcs: invalid sector range: [%d:%d]\n", - start, end ); - return; - } - - epcs_erase (start, end); - - return; -} - -static -void do_epcs_protect (struct epcs_devinfo_t *dev, int argc, char * const argv[]) -{ - unsigned char stat; - - /* For now protection is all-or-nothing to keep things - * simple. The protection bits don't map in a linear - * fashion ... and we would rather protect the bottom - * of the device since it contains the config data and - * leave the top unprotected for app use. But unfortunately - * protection works from top-to-bottom so it does - * really help very much from a software app point-of-view. - */ - if (argc < 3) { - printf ("USAGE: epcs protect on | off\n"); - return; - } - if (!dev) - return; - - /* Protection on/off is just a matter of setting/clearing - * all protection bits in the status register. - */ - stat = epcs_status_rd (); - if (strcmp ("on", argv[2]) == 0) { - stat |= dev->prot_mask; - } else if (strcmp ("off", argv[2]) == 0 ) { - stat &= ~dev->prot_mask; - } else { - printf ("epcs: unknown protection: %s\n", argv[2]); - return; - } - epcs_status_wr (stat); - return; -} - -static -void do_epcs_read (struct epcs_devinfo_t *dev, int argc, char * const argv[]) -{ - ulong addr,off,cnt; - ulong sz; - - if (argc < 5) { - printf ("USAGE: epcs read addr offset count\n"); - return; - } - - sz = 1 << dev->size; - addr = simple_strtoul (argv[2], NULL, 16); - off = simple_strtoul (argv[3], NULL, 16); - cnt = simple_strtoul (argv[4], NULL, 16); - if (off > sz) { - printf ("offset is greater than device size" - "... aborting.\n"); - return; - } - if ((off + cnt) > sz) { - printf ("request exceeds device size" - "... truncating.\n"); - cnt = sz - off; - } - printf ("epcs: read %08lx <- %06lx (0x%lx bytes)\n", - addr, off, cnt); - epcs_read (addr, off, cnt); - - return; -} - -static -void do_epcs_write (struct epcs_devinfo_t *dev, int argc, char * const argv[]) -{ - ulong addr,off,cnt; - ulong sz; - ulong err; - - if (argc < 5) { - printf ("USAGE: epcs write addr offset count\n"); - return; - } - if ((epcs_status_rd() & dev->prot_mask) != 0) { - printf ( "epcs: device protected.\n"); - return; - } - - sz = 1 << dev->size; - addr = simple_strtoul (argv[2], NULL, 16); - off = simple_strtoul (argv[3], NULL, 16); - cnt = simple_strtoul (argv[4], NULL, 16); - if (off > sz) { - printf ("offset is greater than device size" - "... aborting.\n"); - return; - } - if ((off + cnt) > sz) { - printf ("request exceeds device size" - "... truncating.\n"); - cnt = sz - off; - } - printf ("epcs: write %08lx -> %06lx (0x%lx bytes)\n", - addr, off, cnt); - epcs_write (addr, off, cnt); - if (epcs_verify (addr, off, cnt, &err) != 0) - printf ("epcs: write error at offset %06lx\n", err); - - return; -} - -static -void do_epcs_verify (struct epcs_devinfo_t *dev, int argc, char * const argv[]) -{ - ulong addr,off,cnt; - ulong sz; - ulong err; - - if (argc < 5) { - printf ("USAGE: epcs verify addr offset count\n"); - return; - } - - sz = 1 << dev->size; - addr = simple_strtoul (argv[2], NULL, 16); - off = simple_strtoul (argv[3], NULL, 16); - cnt = simple_strtoul (argv[4], NULL, 16); - if (off > sz) { - printf ("offset is greater than device size" - "... aborting.\n"); - return; - } - if ((off + cnt) > sz) { - printf ("request exceeds device size" - "... truncating.\n"); - cnt = sz - off; - } - printf ("epcs: verify %08lx -> %06lx (0x%lx bytes)\n", - addr, off, cnt); - if (epcs_verify (addr, off, cnt, &err) != 0) - printf ("epcs: verify error at offset %06lx\n", err); - - return; -} - -/*-----------------------------------------------------------------------*/ -int do_epcs (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - int len; - struct epcs_devinfo_t *dev = epcs_dev_find (); - - if (!dev) { - printf ("epcs: device not found.\n"); - return (-1); - } - - if (argc < 2) { - do_epcs_info (dev, argc, argv); - return (0); - } - - len = strlen (argv[1]); - if (strncmp ("info", argv[1], len) == 0) { - do_epcs_info (dev, argc, argv); - } else if (strncmp ("erase", argv[1], len) == 0) { - do_epcs_erase (dev, argc, argv); - } else if (strncmp ("protect", argv[1], len) == 0) { - do_epcs_protect (dev, argc, argv); - } else if (strncmp ("read", argv[1], len) == 0) { - do_epcs_read (dev, argc, argv); - } else if (strncmp ("write", argv[1], len) == 0) { - do_epcs_write (dev, argc, argv); - } else if (strncmp ("verify", argv[1], len) == 0) { - do_epcs_verify (dev, argc, argv); - } else { - printf ("epcs: unknown operation: %s\n", argv[1]); - } - - return (0); -} - -/*-----------------------------------------------------------------------*/ - - -U_BOOT_CMD( epcs, 5, 0, do_epcs, SHORT_HELP, LONG_HELP ); - -#endif /* CONFIG_NIOS_EPCS */ diff --git a/include/nios2-epcs.h b/include/nios2-epcs.h deleted file mode 100644 index 8c8f2385ee..0000000000 --- a/include/nios2-epcs.h +++ /dev/null @@ -1,60 +0,0 @@ -/* - * (C) Copyright 2004, Psyent Corporation - * Scott McNutt - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************* - * Altera Nios-II EPCS Controller Core interfaces - ************************************************************************/ - -#ifndef __NIOS2_EPCS_H__ -#define __NIOS2_EPCS_H__ - -typedef struct epcs_devinfo_t { - const char *name; /* Device name */ - unsigned char id; /* Device silicon id */ - unsigned char size; /* Total size log2(bytes)*/ - unsigned char num_sects; /* Number of sectors */ - unsigned char sz_sect; /* Sector size log2(bytes) */ - unsigned char sz_page; /* Page size log2(bytes) */ - unsigned char prot_mask; /* Protection mask */ -}epcs_devinfo_t; - -/* Resets the epcs controller -- to prevent (potential) soft-reset - * problems when booting from the epcs controller - */ -extern int epcs_reset (void); - -/* Returns the devinfo struct if EPCS device is found; - * NULL otherwise. - */ -extern epcs_devinfo_t *epcs_dev_find (void); - -/* Returns the number of bytes used by config data. - * Negative on error. - */ -extern int epcs_cfgsz (void); - -/* Erase sectors 'start' to 'end' - return zero on success - */ -extern int epcs_erase (unsigned start, unsigned end); - -/* Read 'cnt' bytes from device offset 'off' into buf at 'addr' - * Zero return on success - */ -extern int epcs_read (ulong addr, ulong off, ulong cnt); - -/* Write 'cnt' bytes to device offset 'off' from buf at 'addr'. - * Zero return on success - */ -extern int epcs_write (ulong addr, ulong off, ulong cnt); - -/* Verify 'cnt' bytes at device offset 'off' comparing with buf - * at 'addr'. On failure, write first invalid offset to *err. - * Zero return on success - */ -extern int epcs_verify (ulong addr, ulong off, ulong cnt, ulong *err); - -#endif /* __NIOS2_EPCS_H__ */ -- 2.39.5