From 04c8b0da684b61c589e521a97f721f6d3fe7b530 Mon Sep 17 00:00:00 2001 From: Simon Glass Date: Wed, 1 Feb 2023 13:20:12 -0700 Subject: [PATCH] sh4: Drop unused kona_i2c driver This is not used. Drop the driver and Kconfig option. Signed-off-by: Simon Glass Reviewed-by: Heiko Schocher --- drivers/i2c/Makefile | 1 - drivers/i2c/kona_i2c.c | 728 ----------------------------------------- 2 files changed, 729 deletions(-) delete mode 100644 drivers/i2c/kona_i2c.c diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile index 920aafb91c..cde0597290 100644 --- a/drivers/i2c/Makefile +++ b/drivers/i2c/Makefile @@ -25,7 +25,6 @@ obj-$(CONFIG_SYS_I2C_IHS) += ihs_i2c.o obj-$(CONFIG_SYS_I2C_INTEL) += intel_i2c.o obj-$(CONFIG_SYS_I2C_IMX_LPI2C) += imx_lpi2c.o obj-$(CONFIG_SYS_I2C_IPROC) += iproc_i2c.o -obj-$(CONFIG_SYS_I2C_KONA) += kona_i2c.o obj-$(CONFIG_SYS_I2C_LPC32XX) += lpc32xx_i2c.o obj-$(CONFIG_SYS_I2C_MESON) += meson_i2c.o obj-$(CONFIG_SYS_I2C_MICROCHIP) += i2c-microchip.o diff --git a/drivers/i2c/kona_i2c.c b/drivers/i2c/kona_i2c.c deleted file mode 100644 index b9b0ff1c39..0000000000 --- a/drivers/i2c/kona_i2c.c +++ /dev/null @@ -1,728 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2013 Broadcom Corporation. - * - * NOTE: This driver should be converted to driver model before June 2017. - * Please see doc/driver-model/i2c-howto.rst for instructions. - */ - -#include -#include -#include -#include -#include -#include -#include -#include - -/* Hardware register offsets and field defintions */ -#define CS_OFFSET 0x00000020 -#define CS_ACK_SHIFT 3 -#define CS_ACK_MASK 0x00000008 -#define CS_ACK_CMD_GEN_START 0x00000000 -#define CS_ACK_CMD_GEN_RESTART 0x00000001 -#define CS_CMD_SHIFT 1 -#define CS_CMD_CMD_NO_ACTION 0x00000000 -#define CS_CMD_CMD_START_RESTART 0x00000001 -#define CS_CMD_CMD_STOP 0x00000002 -#define CS_EN_SHIFT 0 -#define CS_EN_CMD_ENABLE_BSC 0x00000001 - -#define TIM_OFFSET 0x00000024 -#define TIM_PRESCALE_SHIFT 6 -#define TIM_P_SHIFT 3 -#define TIM_NO_DIV_SHIFT 2 -#define TIM_DIV_SHIFT 0 - -#define DAT_OFFSET 0x00000028 - -#define TOUT_OFFSET 0x0000002c - -#define TXFCR_OFFSET 0x0000003c -#define TXFCR_FIFO_FLUSH_MASK 0x00000080 -#define TXFCR_FIFO_EN_MASK 0x00000040 - -#define IER_OFFSET 0x00000044 -#define IER_READ_COMPLETE_INT_MASK 0x00000010 -#define IER_I2C_INT_EN_MASK 0x00000008 -#define IER_FIFO_INT_EN_MASK 0x00000002 -#define IER_NOACK_EN_MASK 0x00000001 - -#define ISR_OFFSET 0x00000048 -#define ISR_RESERVED_MASK 0xffffff60 -#define ISR_CMDBUSY_MASK 0x00000080 -#define ISR_READ_COMPLETE_MASK 0x00000010 -#define ISR_SES_DONE_MASK 0x00000008 -#define ISR_ERR_MASK 0x00000004 -#define ISR_TXFIFOEMPTY_MASK 0x00000002 -#define ISR_NOACK_MASK 0x00000001 - -#define CLKEN_OFFSET 0x0000004c -#define CLKEN_AUTOSENSE_OFF_MASK 0x00000080 -#define CLKEN_M_SHIFT 4 -#define CLKEN_N_SHIFT 1 -#define CLKEN_CLKEN_MASK 0x00000001 - -#define FIFO_STATUS_OFFSET 0x00000054 -#define FIFO_STATUS_RXFIFO_EMPTY_MASK 0x00000004 -#define FIFO_STATUS_TXFIFO_EMPTY_MASK 0x00000010 - -#define HSTIM_OFFSET 0x00000058 -#define HSTIM_HS_MODE_MASK 0x00008000 -#define HSTIM_HS_HOLD_SHIFT 10 -#define HSTIM_HS_HIGH_PHASE_SHIFT 5 -#define HSTIM_HS_SETUP_SHIFT 0 - -#define PADCTL_OFFSET 0x0000005c -#define PADCTL_PAD_OUT_EN_MASK 0x00000004 - -#define RXFCR_OFFSET 0x00000068 -#define RXFCR_NACK_EN_SHIFT 7 -#define RXFCR_READ_COUNT_SHIFT 0 -#define RXFIFORDOUT_OFFSET 0x0000006c - -/* Locally used constants */ -#define MAX_RX_FIFO_SIZE 64U /* bytes */ -#define MAX_TX_FIFO_SIZE 64U /* bytes */ - -#define I2C_TIMEOUT 100000 /* usecs */ - -#define WAIT_INT_CHK 100 /* usecs */ -#if I2C_TIMEOUT % WAIT_INT_CHK -#error I2C_TIMEOUT must be a multiple of WAIT_INT_CHK -#endif - -/* Operations that can be commanded to the controller */ -enum bcm_kona_cmd_t { - BCM_CMD_NOACTION = 0, - BCM_CMD_START, - BCM_CMD_RESTART, - BCM_CMD_STOP, -}; - -/* Internal divider settings for standard mode, fast mode and fast mode plus */ -struct bus_speed_cfg { - uint8_t time_m; /* Number of cycles for setup time */ - uint8_t time_n; /* Number of cycles for hold time */ - uint8_t prescale; /* Prescale divider */ - uint8_t time_p; /* Timing coefficient */ - uint8_t no_div; /* Disable clock divider */ - uint8_t time_div; /* Post-prescale divider */ -}; - -static const struct bus_speed_cfg std_cfg_table[] = { - [IC_SPEED_MODE_STANDARD] = {0x01, 0x01, 0x03, 0x06, 0x00, 0x02}, - [IC_SPEED_MODE_FAST] = {0x05, 0x01, 0x03, 0x05, 0x01, 0x02}, - [IC_SPEED_MODE_FAST_PLUS] = {0x01, 0x01, 0x03, 0x01, 0x01, 0x03}, -}; - -struct bcm_kona_i2c_dev { - void *base; - uint speed; - const struct bus_speed_cfg *std_cfg; -}; - -/* Keep these two defines in sync */ -#define DEF_SPD I2C_SPEED_STANDARD_RATE -#define DEF_SPD_ENUM IC_SPEED_MODE_STANDARD - -#define DEF_DEVICE(num) \ -{(void *)CONFIG_SYS_I2C_BASE##num, DEF_SPD, &std_cfg_table[DEF_SPD_ENUM]} - -static struct bcm_kona_i2c_dev g_i2c_devs[CFG_SYS_MAX_I2C_BUS] = { -#ifdef CONFIG_SYS_I2C_BASE0 - DEF_DEVICE(0), -#endif -#ifdef CONFIG_SYS_I2C_BASE1 - DEF_DEVICE(1), -#endif -#ifdef CONFIG_SYS_I2C_BASE2 - DEF_DEVICE(2), -#endif -#ifdef CONFIG_SYS_I2C_BASE3 - DEF_DEVICE(3), -#endif -#ifdef CONFIG_SYS_I2C_BASE4 - DEF_DEVICE(4), -#endif -#ifdef CONFIG_SYS_I2C_BASE5 - DEF_DEVICE(5), -#endif -}; - -#define I2C_M_TEN 0x0010 /* ten bit address */ -#define I2C_M_RD 0x0001 /* read data */ -#define I2C_M_NOSTART 0x4000 /* no restart between msgs */ - -struct kona_i2c_msg { - uint16_t addr; - uint16_t flags; - uint16_t len; - uint8_t *buf; -}; - -static void bcm_kona_i2c_send_cmd_to_ctrl(struct bcm_kona_i2c_dev *dev, - enum bcm_kona_cmd_t cmd) -{ - debug("%s, %d\n", __func__, cmd); - - switch (cmd) { - case BCM_CMD_NOACTION: - writel((CS_CMD_CMD_NO_ACTION << CS_CMD_SHIFT) | - (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT), - dev->base + CS_OFFSET); - break; - - case BCM_CMD_START: - writel((CS_ACK_CMD_GEN_START << CS_ACK_SHIFT) | - (CS_CMD_CMD_START_RESTART << CS_CMD_SHIFT) | - (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT), - dev->base + CS_OFFSET); - break; - - case BCM_CMD_RESTART: - writel((CS_ACK_CMD_GEN_RESTART << CS_ACK_SHIFT) | - (CS_CMD_CMD_START_RESTART << CS_CMD_SHIFT) | - (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT), - dev->base + CS_OFFSET); - break; - - case BCM_CMD_STOP: - writel((CS_CMD_CMD_STOP << CS_CMD_SHIFT) | - (CS_EN_CMD_ENABLE_BSC << CS_EN_SHIFT), - dev->base + CS_OFFSET); - break; - - default: - printf("Unknown command %d\n", cmd); - } -} - -static void bcm_kona_i2c_enable_clock(struct bcm_kona_i2c_dev *dev) -{ - writel(readl(dev->base + CLKEN_OFFSET) | CLKEN_CLKEN_MASK, - dev->base + CLKEN_OFFSET); -} - -static void bcm_kona_i2c_disable_clock(struct bcm_kona_i2c_dev *dev) -{ - writel(readl(dev->base + CLKEN_OFFSET) & ~CLKEN_CLKEN_MASK, - dev->base + CLKEN_OFFSET); -} - -/* Wait until at least one of the mask bit(s) are set */ -static unsigned long wait_for_int_timeout(struct bcm_kona_i2c_dev *dev, - unsigned long time_left, - uint32_t mask) -{ - uint32_t status; - - while (time_left) { - status = readl(dev->base + ISR_OFFSET); - - if ((status & ~ISR_RESERVED_MASK) == 0) { - debug("Bogus I2C interrupt 0x%x\n", status); - continue; - } - - /* Must flush the TX FIFO when NAK detected */ - if (status & ISR_NOACK_MASK) - writel(TXFCR_FIFO_FLUSH_MASK | TXFCR_FIFO_EN_MASK, - dev->base + TXFCR_OFFSET); - - writel(status & ~ISR_RESERVED_MASK, dev->base + ISR_OFFSET); - - if (status & mask) { - /* We are done since one of the mask bits are set */ - return time_left; - } - udelay(WAIT_INT_CHK); - time_left -= WAIT_INT_CHK; - } - return 0; -} - -/* Send command to I2C bus */ -static int bcm_kona_send_i2c_cmd(struct bcm_kona_i2c_dev *dev, - enum bcm_kona_cmd_t cmd) -{ - int rc = 0; - unsigned long time_left = I2C_TIMEOUT; - - /* Send the command */ - bcm_kona_i2c_send_cmd_to_ctrl(dev, cmd); - - /* Wait for transaction to finish or timeout */ - time_left = wait_for_int_timeout(dev, time_left, IER_I2C_INT_EN_MASK); - - if (!time_left) { - printf("controller timed out\n"); - rc = -ETIMEDOUT; - } - - /* Clear command */ - bcm_kona_i2c_send_cmd_to_ctrl(dev, BCM_CMD_NOACTION); - - return rc; -} - -/* Read a single RX FIFO worth of data from the i2c bus */ -static int bcm_kona_i2c_read_fifo_single(struct bcm_kona_i2c_dev *dev, - uint8_t *buf, unsigned int len, - unsigned int last_byte_nak) -{ - unsigned long time_left = I2C_TIMEOUT; - - /* Start the RX FIFO */ - writel((last_byte_nak << RXFCR_NACK_EN_SHIFT) | - (len << RXFCR_READ_COUNT_SHIFT), dev->base + RXFCR_OFFSET); - - /* Wait for FIFO read to complete */ - time_left = - wait_for_int_timeout(dev, time_left, IER_READ_COMPLETE_INT_MASK); - - if (!time_left) { - printf("RX FIFO time out\n"); - return -EREMOTEIO; - } - - /* Read data from FIFO */ - for (; len > 0; len--, buf++) - *buf = readl(dev->base + RXFIFORDOUT_OFFSET); - - return 0; -} - -/* Read any amount of data using the RX FIFO from the i2c bus */ -static int bcm_kona_i2c_read_fifo(struct bcm_kona_i2c_dev *dev, - struct kona_i2c_msg *msg) -{ - unsigned int bytes_to_read = MAX_RX_FIFO_SIZE; - unsigned int last_byte_nak = 0; - unsigned int bytes_read = 0; - int rc; - - uint8_t *tmp_buf = msg->buf; - - while (bytes_read < msg->len) { - if (msg->len - bytes_read <= MAX_RX_FIFO_SIZE) { - last_byte_nak = 1; /* NAK last byte of transfer */ - bytes_to_read = msg->len - bytes_read; - } - - rc = bcm_kona_i2c_read_fifo_single(dev, tmp_buf, bytes_to_read, - last_byte_nak); - if (rc < 0) - return -EREMOTEIO; - - bytes_read += bytes_to_read; - tmp_buf += bytes_to_read; - } - - return 0; -} - -/* Write a single byte of data to the i2c bus */ -static int bcm_kona_i2c_write_byte(struct bcm_kona_i2c_dev *dev, uint8_t data, - unsigned int nak_expected) -{ - unsigned long time_left = I2C_TIMEOUT; - unsigned int nak_received; - - /* Clear pending session done interrupt */ - writel(ISR_SES_DONE_MASK, dev->base + ISR_OFFSET); - - /* Send one byte of data */ - writel(data, dev->base + DAT_OFFSET); - - time_left = wait_for_int_timeout(dev, time_left, IER_I2C_INT_EN_MASK); - - if (!time_left) { - debug("controller timed out\n"); - return -ETIMEDOUT; - } - - nak_received = readl(dev->base + CS_OFFSET) & CS_ACK_MASK ? 1 : 0; - - if (nak_received ^ nak_expected) { - debug("unexpected NAK/ACK\n"); - return -EREMOTEIO; - } - - return 0; -} - -/* Write a single TX FIFO worth of data to the i2c bus */ -static int bcm_kona_i2c_write_fifo_single(struct bcm_kona_i2c_dev *dev, - uint8_t *buf, unsigned int len) -{ - int k; - unsigned long time_left = I2C_TIMEOUT; - unsigned int fifo_status; - - /* Write data into FIFO */ - for (k = 0; k < len; k++) - writel(buf[k], (dev->base + DAT_OFFSET)); - - /* Wait for FIFO to empty */ - do { - time_left = - wait_for_int_timeout(dev, time_left, - (IER_FIFO_INT_EN_MASK | - IER_NOACK_EN_MASK)); - fifo_status = readl(dev->base + FIFO_STATUS_OFFSET); - } while (time_left && !(fifo_status & FIFO_STATUS_TXFIFO_EMPTY_MASK)); - - /* Check if there was a NAK */ - if (readl(dev->base + CS_OFFSET) & CS_ACK_MASK) { - printf("unexpected NAK\n"); - return -EREMOTEIO; - } - - /* Check if a timeout occurred */ - if (!time_left) { - printf("completion timed out\n"); - return -EREMOTEIO; - } - - return 0; -} - -/* Write any amount of data using TX FIFO to the i2c bus */ -static int bcm_kona_i2c_write_fifo(struct bcm_kona_i2c_dev *dev, - struct kona_i2c_msg *msg) -{ - unsigned int bytes_to_write = MAX_TX_FIFO_SIZE; - unsigned int bytes_written = 0; - int rc; - - uint8_t *tmp_buf = msg->buf; - - while (bytes_written < msg->len) { - if (msg->len - bytes_written <= MAX_TX_FIFO_SIZE) - bytes_to_write = msg->len - bytes_written; - - rc = bcm_kona_i2c_write_fifo_single(dev, tmp_buf, - bytes_to_write); - if (rc < 0) - return -EREMOTEIO; - - bytes_written += bytes_to_write; - tmp_buf += bytes_to_write; - } - - return 0; -} - -/* Send i2c address */ -static int bcm_kona_i2c_do_addr(struct bcm_kona_i2c_dev *dev, - struct kona_i2c_msg *msg) -{ - unsigned char addr; - - if (msg->flags & I2C_M_TEN) { - /* First byte is 11110XX0 where XX is upper 2 bits */ - addr = 0xf0 | ((msg->addr & 0x300) >> 7); - if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0) - return -EREMOTEIO; - - /* Second byte is the remaining 8 bits */ - addr = msg->addr & 0xff; - if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0) - return -EREMOTEIO; - - if (msg->flags & I2C_M_RD) { - /* For read, send restart command */ - if (bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART) < 0) - return -EREMOTEIO; - - /* Then re-send the first byte with the read bit set */ - addr = 0xf0 | ((msg->addr & 0x300) >> 7) | 0x01; - if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0) - return -EREMOTEIO; - } - } else { - addr = msg->addr << 1; - - if (msg->flags & I2C_M_RD) - addr |= 1; - - if (bcm_kona_i2c_write_byte(dev, addr, 0) < 0) - return -EREMOTEIO; - } - - return 0; -} - -static void bcm_kona_i2c_enable_autosense(struct bcm_kona_i2c_dev *dev) -{ - writel(readl(dev->base + CLKEN_OFFSET) & ~CLKEN_AUTOSENSE_OFF_MASK, - dev->base + CLKEN_OFFSET); -} - -static void bcm_kona_i2c_config_timing(struct bcm_kona_i2c_dev *dev) -{ - writel(readl(dev->base + HSTIM_OFFSET) & ~HSTIM_HS_MODE_MASK, - dev->base + HSTIM_OFFSET); - - writel((dev->std_cfg->prescale << TIM_PRESCALE_SHIFT) | - (dev->std_cfg->time_p << TIM_P_SHIFT) | - (dev->std_cfg->no_div << TIM_NO_DIV_SHIFT) | - (dev->std_cfg->time_div << TIM_DIV_SHIFT), - dev->base + TIM_OFFSET); - - writel((dev->std_cfg->time_m << CLKEN_M_SHIFT) | - (dev->std_cfg->time_n << CLKEN_N_SHIFT) | - CLKEN_CLKEN_MASK, dev->base + CLKEN_OFFSET); -} - -/* Master transfer function */ -static int bcm_kona_i2c_xfer(struct bcm_kona_i2c_dev *dev, - struct kona_i2c_msg msgs[], int num) -{ - struct kona_i2c_msg *pmsg; - int rc = 0; - int i; - - /* Enable pad output */ - writel(0, dev->base + PADCTL_OFFSET); - - /* Enable internal clocks */ - bcm_kona_i2c_enable_clock(dev); - - /* Send start command */ - rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_START); - if (rc < 0) { - printf("Start command failed rc = %d\n", rc); - goto xfer_disable_pad; - } - - /* Loop through all messages */ - for (i = 0; i < num; i++) { - pmsg = &msgs[i]; - - /* Send restart for subsequent messages */ - if ((i != 0) && ((pmsg->flags & I2C_M_NOSTART) == 0)) { - rc = bcm_kona_send_i2c_cmd(dev, BCM_CMD_RESTART); - if (rc < 0) { - printf("restart cmd failed rc = %d\n", rc); - goto xfer_send_stop; - } - } - - /* Send slave address */ - if (!(pmsg->flags & I2C_M_NOSTART)) { - rc = bcm_kona_i2c_do_addr(dev, pmsg); - if (rc < 0) { - debug("NAK from addr %2.2x msg#%d rc = %d\n", - pmsg->addr, i, rc); - goto xfer_send_stop; - } - } - - /* Perform data transfer */ - if (pmsg->flags & I2C_M_RD) { - rc = bcm_kona_i2c_read_fifo(dev, pmsg); - if (rc < 0) { - printf("read failure\n"); - goto xfer_send_stop; - } - } else { - rc = bcm_kona_i2c_write_fifo(dev, pmsg); - if (rc < 0) { - printf("write failure"); - goto xfer_send_stop; - } - } - } - - rc = num; - -xfer_send_stop: - /* Send a STOP command */ - bcm_kona_send_i2c_cmd(dev, BCM_CMD_STOP); - -xfer_disable_pad: - /* Disable pad output */ - writel(PADCTL_PAD_OUT_EN_MASK, dev->base + PADCTL_OFFSET); - - /* Stop internal clock */ - bcm_kona_i2c_disable_clock(dev); - - return rc; -} - -static uint bcm_kona_i2c_assign_bus_speed(struct bcm_kona_i2c_dev *dev, - uint speed) -{ - switch (speed) { - case I2C_SPEED_STANDARD_RATE: - dev->std_cfg = &std_cfg_table[IC_SPEED_MODE_STANDARD]; - break; - case I2C_SPEED_FAST_RATE: - dev->std_cfg = &std_cfg_table[IC_SPEED_MODE_FAST]; - break; - case I2C_SPEED_FAST_PLUS_RATE: - dev->std_cfg = &std_cfg_table[IC_SPEED_MODE_FAST_PLUS]; - break; - default: - printf("%d hz bus speed not supported\n", speed); - return -EINVAL; - } - dev->speed = speed; - return 0; -} - -static void bcm_kona_i2c_init(struct bcm_kona_i2c_dev *dev) -{ - /* Parse bus speed */ - bcm_kona_i2c_assign_bus_speed(dev, dev->speed); - - /* Enable internal clocks */ - bcm_kona_i2c_enable_clock(dev); - - /* Configure internal dividers */ - bcm_kona_i2c_config_timing(dev); - - /* Disable timeout */ - writel(0, dev->base + TOUT_OFFSET); - - /* Enable autosense */ - bcm_kona_i2c_enable_autosense(dev); - - /* Enable TX FIFO */ - writel(TXFCR_FIFO_FLUSH_MASK | TXFCR_FIFO_EN_MASK, - dev->base + TXFCR_OFFSET); - - /* Mask all interrupts */ - writel(0, dev->base + IER_OFFSET); - - /* Clear all pending interrupts */ - writel(ISR_CMDBUSY_MASK | - ISR_READ_COMPLETE_MASK | - ISR_SES_DONE_MASK | - ISR_ERR_MASK | - ISR_TXFIFOEMPTY_MASK | ISR_NOACK_MASK, dev->base + ISR_OFFSET); - - /* Enable the controller but leave it idle */ - bcm_kona_i2c_send_cmd_to_ctrl(dev, BCM_CMD_NOACTION); - - /* Disable pad output */ - writel(PADCTL_PAD_OUT_EN_MASK, dev->base + PADCTL_OFFSET); -} - -/* - * uboot layer - */ -struct bcm_kona_i2c_dev *kona_get_dev(struct i2c_adapter *adap) -{ - return &g_i2c_devs[adap->hwadapnr]; -} - -static void kona_i2c_init(struct i2c_adapter *adap, int speed, int slaveaddr) -{ - struct bcm_kona_i2c_dev *dev = kona_get_dev(adap); - - if (clk_bsc_enable(dev->base)) - return; - - bcm_kona_i2c_init(dev); -} - -static int kona_i2c_read(struct i2c_adapter *adap, uchar chip, uint addr, - int alen, uchar *buffer, int len) -{ - /* msg[0] writes the addr, msg[1] reads the data */ - struct kona_i2c_msg msg[2]; - unsigned char msgbuf0[64]; - struct bcm_kona_i2c_dev *dev = kona_get_dev(adap); - - msg[0].addr = chip; - msg[0].flags = 0; - msg[0].len = 1; - msg[0].buf = msgbuf0; /* msgbuf0 contains incrementing reg addr */ - - msg[1].addr = chip; - msg[1].flags = I2C_M_RD; - /* msg[1].buf dest ptr increments each read */ - - msgbuf0[0] = (unsigned char)addr; - msg[1].buf = buffer; - msg[1].len = len; - if (bcm_kona_i2c_xfer(dev, msg, 2) < 0) { - /* Sending 2 i2c messages */ - kona_i2c_init(adap, adap->speed, adap->slaveaddr); - debug("I2C read: I/O error\n"); - return -EIO; - } - return 0; -} - -static int kona_i2c_write(struct i2c_adapter *adap, uchar chip, uint addr, - int alen, uchar *buffer, int len) -{ - struct kona_i2c_msg msg[1]; - unsigned char msgbuf0[64]; - unsigned int i; - struct bcm_kona_i2c_dev *dev = kona_get_dev(adap); - - msg[0].addr = chip; - msg[0].flags = 0; - msg[0].len = 2; /* addr byte plus data */ - msg[0].buf = msgbuf0; - - for (i = 0; i < len; i++) { - msgbuf0[0] = addr++; - msgbuf0[1] = buffer[i]; - if (bcm_kona_i2c_xfer(dev, msg, 1) < 0) { - kona_i2c_init(adap, adap->speed, adap->slaveaddr); - debug("I2C write: I/O error\n"); - return -EIO; - } - } - return 0; -} - -static int kona_i2c_probe(struct i2c_adapter *adap, uchar chip) -{ - uchar tmp; - - /* - * read addr 0x0 of the given chip. - */ - return kona_i2c_read(adap, chip, 0x0, 1, &tmp, 1); -} - -static uint kona_i2c_set_bus_speed(struct i2c_adapter *adap, uint speed) -{ - struct bcm_kona_i2c_dev *dev = kona_get_dev(adap); - return bcm_kona_i2c_assign_bus_speed(dev, speed); -} - -/* - * Register kona i2c adapters. Keep the order below so - * that the bus number matches the adapter number. - */ -#define DEF_ADAPTER(num) \ -U_BOOT_I2C_ADAP_COMPLETE(kona##num, kona_i2c_init, kona_i2c_probe, \ - kona_i2c_read, kona_i2c_write, \ - kona_i2c_set_bus_speed, DEF_SPD, 0x00, num) - -#ifdef CONFIG_SYS_I2C_BASE0 - DEF_ADAPTER(0) -#endif -#ifdef CONFIG_SYS_I2C_BASE1 - DEF_ADAPTER(1) -#endif -#ifdef CONFIG_SYS_I2C_BASE2 - DEF_ADAPTER(2) -#endif -#ifdef CONFIG_SYS_I2C_BASE3 - DEF_ADAPTER(3) -#endif -#ifdef CONFIG_SYS_I2C_BASE4 - DEF_ADAPTER(4) -#endif -#ifdef CONFIG_SYS_I2C_BASE5 - DEF_ADAPTER(5) -#endif -- 2.39.5