From 0040ed7e0c7b655c7e9e60b12a203eb1463ceffe Mon Sep 17 00:00:00 2001 From: Tom Rini Date: Tue, 9 Aug 2022 10:16:21 -0400 Subject: [PATCH] ppc: Remove corenet_ds boards These boards have been orphaned for some time and are behind on various DM migrations. Remove them. Cc: Priyanka Jain Cc: Peng Fan Signed-off-by: Tom Rini --- .azure-pipelines.yml | 4 +- arch/powerpc/cpu/mpc85xx/Kconfig | 1 - board/freescale/corenet_ds/Kconfig | 38 - board/freescale/corenet_ds/MAINTAINERS | 21 - board/freescale/corenet_ds/Makefile | 14 - board/freescale/corenet_ds/corenet_ds.c | 218 ----- board/freescale/corenet_ds/corenet_ds.h | 12 - board/freescale/corenet_ds/ddr.c | 287 ------- board/freescale/corenet_ds/eth_hydra.c | 526 ------------ board/freescale/corenet_ds/eth_p4080.c | 489 ----------- board/freescale/corenet_ds/eth_superhydra.c | 783 ------------------ board/freescale/corenet_ds/p3041ds_ddr.c | 11 - board/freescale/corenet_ds/p4080ds_ddr.c | 346 -------- board/freescale/corenet_ds/p5040ds_ddr.c | 15 - board/freescale/corenet_ds/rcw_p3041ds.cfg | 11 - board/freescale/corenet_ds/rcw_p4080ds.cfg | 11 - board/freescale/corenet_ds/rcw_p5040ds.cfg | 11 - .../{corenet_ds => p2041rdb}/pbi.cfg | 0 .../{corenet_ds => p2041rdb}/rcw_p2041rdb.cfg | 0 configs/P2041RDB_NAND_defconfig | 4 +- configs/P2041RDB_SDCARD_defconfig | 4 +- configs/P2041RDB_SPIFLASH_defconfig | 4 +- configs/P3041DS_NAND_defconfig | 113 --- configs/P3041DS_SDCARD_defconfig | 108 --- configs/P3041DS_SPIFLASH_defconfig | 110 --- configs/P3041DS_defconfig | 105 --- configs/P4080DS_SDCARD_defconfig | 105 --- configs/P4080DS_SPIFLASH_defconfig | 107 --- configs/P4080DS_defconfig | 102 --- configs/P5040DS_NAND_defconfig | 113 --- configs/P5040DS_SDCARD_defconfig | 107 --- configs/P5040DS_SPIFLASH_defconfig | 109 --- configs/P5040DS_defconfig | 104 --- doc/README.pblimage | 2 +- include/configs/P3041DS.h | 18 - include/configs/P4080DS.h | 17 - include/configs/P5040DS.h | 13 - 37 files changed, 8 insertions(+), 4035 deletions(-) delete mode 100644 board/freescale/corenet_ds/Kconfig delete mode 100644 board/freescale/corenet_ds/MAINTAINERS delete mode 100644 board/freescale/corenet_ds/Makefile delete mode 100644 board/freescale/corenet_ds/corenet_ds.c delete mode 100644 board/freescale/corenet_ds/corenet_ds.h delete mode 100644 board/freescale/corenet_ds/ddr.c delete mode 100644 board/freescale/corenet_ds/eth_hydra.c delete mode 100644 board/freescale/corenet_ds/eth_p4080.c delete mode 100644 board/freescale/corenet_ds/eth_superhydra.c delete mode 100644 board/freescale/corenet_ds/p3041ds_ddr.c delete mode 100644 board/freescale/corenet_ds/p4080ds_ddr.c delete mode 100644 board/freescale/corenet_ds/p5040ds_ddr.c delete mode 100644 board/freescale/corenet_ds/rcw_p3041ds.cfg delete mode 100644 board/freescale/corenet_ds/rcw_p4080ds.cfg delete mode 100644 board/freescale/corenet_ds/rcw_p5040ds.cfg rename board/freescale/{corenet_ds => p2041rdb}/pbi.cfg (100%) rename board/freescale/{corenet_ds => p2041rdb}/rcw_p2041rdb.cfg (100%) delete mode 100644 configs/P3041DS_NAND_defconfig delete mode 100644 configs/P3041DS_SDCARD_defconfig delete mode 100644 configs/P3041DS_SPIFLASH_defconfig delete mode 100644 configs/P3041DS_defconfig delete mode 100644 configs/P4080DS_SDCARD_defconfig delete mode 100644 configs/P4080DS_SPIFLASH_defconfig delete mode 100644 configs/P4080DS_defconfig delete mode 100644 configs/P5040DS_NAND_defconfig delete mode 100644 configs/P5040DS_SDCARD_defconfig delete mode 100644 configs/P5040DS_SPIFLASH_defconfig delete mode 100644 configs/P5040DS_defconfig delete mode 100644 include/configs/P3041DS.h delete mode 100644 include/configs/P4080DS.h delete mode 100644 include/configs/P5040DS.h diff --git a/.azure-pipelines.yml b/.azure-pipelines.yml index 053f816db5..b40ce8d3f9 100644 --- a/.azure-pipelines.yml +++ b/.azure-pipelines.yml @@ -517,9 +517,7 @@ stages: non_fsl_ppc: BUILDMAN: "powerpc -x freescale" mpc85xx_freescale: - BUILDMAN: "mpc85xx&freescale -x t208xrdb -x t102* -x p1_p2_rdb_pc -x p1010rdb -x corenet_ds -x bsc91*" - t208xrdb_corenet_ds: - BUILDMAN: "t208xrdb corenet_ds" + BUILDMAN: "mpc85xx&freescale -x t102* -x p1_p2_rdb_pc -x p1010rdb -x bsc91*" fsl_ppc: BUILDMAN: "mpc83xx&freescale" t102x: diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig index 81f7991268..085ddd8439 100644 --- a/arch/powerpc/cpu/mpc85xx/Kconfig +++ b/arch/powerpc/cpu/mpc85xx/Kconfig @@ -1444,7 +1444,6 @@ config FSL_VIA bool source "board/emulation/qemu-ppce500/Kconfig" -source "board/freescale/corenet_ds/Kconfig" source "board/freescale/mpc8548cds/Kconfig" source "board/freescale/p1010rdb/Kconfig" source "board/freescale/p1_p2_rdb_pc/Kconfig" diff --git a/board/freescale/corenet_ds/Kconfig b/board/freescale/corenet_ds/Kconfig deleted file mode 100644 index dbcd1afcba..0000000000 --- a/board/freescale/corenet_ds/Kconfig +++ /dev/null @@ -1,38 +0,0 @@ -if TARGET_P3041DS - -config SYS_BOARD - default "corenet_ds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "P3041DS" - -endif - -if TARGET_P4080DS - -config SYS_BOARD - default "corenet_ds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "P4080DS" - -endif - -if TARGET_P5040DS - -config SYS_BOARD - default "corenet_ds" - -config SYS_VENDOR - default "freescale" - -config SYS_CONFIG_NAME - default "P5040DS" - -endif diff --git a/board/freescale/corenet_ds/MAINTAINERS b/board/freescale/corenet_ds/MAINTAINERS deleted file mode 100644 index f0da86a34c..0000000000 --- a/board/freescale/corenet_ds/MAINTAINERS +++ /dev/null @@ -1,21 +0,0 @@ -CORENET_DS BOARD -#M: - -S: Maintained -F: board/freescale/corenet_ds/ -F: include/configs/P3041DS.h -F: configs/P3041DS_defconfig -F: configs/P3041DS_NAND_defconfig -F: configs/P3041DS_SDCARD_defconfig -F: configs/P3041DS_SPIFLASH_defconfig -F: configs/P3041DS_SRIO_PCIE_BOOT_defconfig -F: include/configs/P4080DS.h -F: configs/P4080DS_defconfig -F: configs/P4080DS_SDCARD_defconfig -F: configs/P4080DS_SPIFLASH_defconfig -F: configs/P4080DS_SRIO_PCIE_BOOT_defconfig -F: include/configs/P5040DS.h -F: configs/P5040DS_defconfig -F: configs/P5040DS_NAND_defconfig -F: configs/P5040DS_SDCARD_defconfig -F: configs/P5040DS_SPIFLASH_defconfig -F: configs/P5040DS_SECURE_BOOT_defconfig diff --git a/board/freescale/corenet_ds/Makefile b/board/freescale/corenet_ds/Makefile deleted file mode 100644 index 4d62fc9ce1..0000000000 --- a/board/freescale/corenet_ds/Makefile +++ /dev/null @@ -1,14 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Copyright 2007-2009 Freescale Semiconductor, Inc. -# (C) Copyright 2001-2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. - -obj-y += corenet_ds.o -obj-y += ddr.o -obj-$(CONFIG_TARGET_P3041DS) += eth_hydra.o -obj-$(CONFIG_TARGET_P4080DS) += eth_p4080.o -obj-$(CONFIG_TARGET_P5040DS) += eth_superhydra.o -obj-$(CONFIG_TARGET_P3041DS) += p3041ds_ddr.o -obj-$(CONFIG_TARGET_P4080DS) += p4080ds_ddr.o -obj-$(CONFIG_TARGET_P5040DS) += p5040ds_ddr.o diff --git a/board/freescale/corenet_ds/corenet_ds.c b/board/freescale/corenet_ds/corenet_ds.c deleted file mode 100644 index 3a83e65f2f..0000000000 --- a/board/freescale/corenet_ds/corenet_ds.c +++ /dev/null @@ -1,218 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "../common/ngpixis.h" -#include "corenet_ds.h" - -DECLARE_GLOBAL_DATA_PTR; - -int checkboard (void) -{ - u8 sw; - struct cpu_type *cpu = gd->arch.cpu; -#if defined(CONFIG_TARGET_P3041DS) || defined(CONFIG_TARGET_P5020DS) || \ - defined(CONFIG_TARGET_P5040DS) - unsigned int i; -#endif - static const char * const freq[] = {"100", "125", "156.25", "212.5" }; - - printf("Board: %sDS, ", cpu->name); - printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ", - in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver)); - - sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH)); - sw = (sw & PIXIS_LBMAP_MASK) >> PIXIS_LBMAP_SHIFT; - - if (sw < 0x8) - printf("vBank: %d\n", sw); - else if (sw == 0x8) - puts("Promjet\n"); - else if (sw == 0x9) - puts("NAND\n"); - else - printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH); - - /* Display the actual SERDES reference clocks as configured by the - * dip switches on the board. Note that the SWx registers could - * technically be set to force the reference clocks to match the - * values that the SERDES expects (or vice versa). For now, however, - * we just display both values and hope the user notices when they - * don't match. - */ - puts("SERDES Reference Clocks: "); -#if defined(CONFIG_TARGET_P3041DS) || defined(CONFIG_TARGET_P5020DS) || \ - defined(CONFIG_TARGET_P5040DS) - sw = in_8(&PIXIS_SW(5)); - for (i = 0; i < 3; i++) { - unsigned int clock = (sw >> (6 - (2 * i))) & 3; - - printf("Bank%u=%sMhz ", i+1, freq[clock]); - } -#ifdef CONFIG_TARGET_P5040DS - /* On P5040DS, SW11[7:8] determines the Bank 4 frequency */ - sw = in_8(&PIXIS_SW(9)); - printf("Bank4=%sMhz ", freq[sw & 3]); -#endif - puts("\n"); -#else - sw = in_8(&PIXIS_SW(3)); - /* SW3[2]: 0 = 100 Mhz, 1 = 125 MHz */ - /* SW3[3]: 0 = 125 Mhz, 1 = 156.25 MHz */ - /* SW3[4]: 0 = 125 Mhz, 1 = 156.25 MHz */ - printf("Bank1=%sMHz ", freq[!!(sw & 0x40)]); - printf("Bank2=%sMHz ", freq[1 + !!(sw & 0x20)]); - printf("Bank3=%sMHz\n", freq[1 + !!(sw & 0x10)]); -#endif - - return 0; -} - -int board_early_init_f(void) -{ - volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - - /* - * P4080 DS board only uses the DDR1_MCK0/3 and DDR2_MCK0/3 - * disable the DDR1_MCK1/2/4/5 and DDR2_MCK1/2/4/5 to reduce - * the noise introduced by these unterminated and unused clock pairs. - */ - setbits_be32(&gur->ddrclkdr, 0x001B001B); - - return 0; -} - -int board_early_init_r(void) -{ - const unsigned int flashbase = CONFIG_SYS_FLASH_BASE; - int flash_esel = find_tlb_idx((void *)flashbase, 1); - - /* - * Remap Boot flash + PROMJET region to caching-inhibited - * so that flash can be erased properly. - */ - - /* Flush d-cache and invalidate i-cache of any FLASH data */ - flush_dcache(); - invalidate_icache(); - - if (flash_esel == -1) { - /* very unlikely unless something is messed up */ - puts("Error: Could not find TLB for FLASH BASE\n"); - flash_esel = 2; /* give our best effort to continue */ - } else { - /* invalidate existing TLB entry for flash + promjet */ - disable_tlb(flash_esel); - } - - set_tlb(1, flashbase, CONFIG_SYS_FLASH_BASE_PHYS, /* tlb, epn, rpn */ - MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G, /* perms, wimge */ - 0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */ - - return 0; -} - -#define NUM_SRDS_BANKS 3 - -int misc_init_r(void) -{ - serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR; - u32 actual[NUM_SRDS_BANKS]; - unsigned int i; - u8 sw; - -#if defined(CONFIG_TARGET_P3041DS) || defined(CONFIG_TARGET_P5020DS) || \ - defined(CONFIG_TARGET_P5040DS) - sw = in_8(&PIXIS_SW(5)); - for (i = 0; i < 3; i++) { - unsigned int clock = (sw >> (6 - (2 * i))) & 3; - switch (clock) { - case 0: - actual[i] = SRDS_PLLCR0_RFCK_SEL_100; - break; - case 1: - actual[i] = SRDS_PLLCR0_RFCK_SEL_125; - break; - case 2: - actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25; - break; - default: - printf("Warning: SDREFCLK%u switch setting of '11' is " - "unsupported\n", i + 1); - break; - } - } -#else - /* Warn if the expected SERDES reference clocks don't match the - * actual reference clocks. This needs to be done after calling - * p4080_erratum_serdes8(), since that function may modify the clocks. - */ - sw = in_8(&PIXIS_SW(3)); - actual[0] = (sw & 0x40) ? - SRDS_PLLCR0_RFCK_SEL_125 : SRDS_PLLCR0_RFCK_SEL_100; - actual[1] = (sw & 0x20) ? - SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125; - actual[2] = (sw & 0x10) ? - SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125; -#endif - - for (i = 0; i < NUM_SRDS_BANKS; i++) { - u32 expected = srds_regs->bank[i].pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK; - if (expected != actual[i]) { - printf("Warning: SERDES bank %u expects reference clock" - " %sMHz, but actual is %sMHz\n", i + 1, - serdes_clock_to_string(expected), - serdes_clock_to_string(actual[i])); - } - } - - return 0; -} - -int ft_board_setup(void *blob, struct bd_info *bd) -{ - phys_addr_t base; - phys_size_t size; - - ft_cpu_setup(blob, bd); - - base = env_get_bootm_low(); - size = env_get_bootm_size(); - - fdt_fixup_memory(blob, (u64)base, (u64)size); - -#ifdef CONFIG_PCI - pci_of_setup(blob, bd); -#endif - - fdt_fixup_liodn(blob); - fsl_fdt_fixup_dr_usb(blob, bd); - -#ifdef CONFIG_SYS_DPAA_FMAN -#ifndef CONFIG_DM_ETH - fdt_fixup_fman_ethernet(blob); -#endif - fdt_fixup_board_enet(blob); -#endif - - return 0; -} diff --git a/board/freescale/corenet_ds/corenet_ds.h b/board/freescale/corenet_ds/corenet_ds.h deleted file mode 100644 index 84e5c4a2de..0000000000 --- a/board/freescale/corenet_ds/corenet_ds.h +++ /dev/null @@ -1,12 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2011 Freescale Semiconductor, Inc. - */ - -#ifndef __CORENET_DS_H__ -#define __CORENET_DS_H__ - -void fdt_fixup_board_enet(void *blob); -void pci_of_setup(void *blob, struct bd_info *bd); - -#endif diff --git a/board/freescale/corenet_ds/ddr.c b/board/freescale/corenet_ds/ddr.c deleted file mode 100644 index 2c440673e7..0000000000 --- a/board/freescale/corenet_ds/ddr.c +++ /dev/null @@ -1,287 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -DECLARE_GLOBAL_DATA_PTR; - - -/* - * Fixed sdram init -- doesn't use serial presence detect. - */ -extern fixed_ddr_parm_t fixed_ddr_parm_0[]; -#if (CONFIG_SYS_NUM_DDR_CTLRS == 2) -extern fixed_ddr_parm_t fixed_ddr_parm_1[]; -#endif - -phys_size_t fixed_sdram(void) -{ - int i; - char buf[32]; - fsl_ddr_cfg_regs_t ddr_cfg_regs; - phys_size_t ddr_size; - unsigned int lawbar1_target_id; - ulong ddr_freq, ddr_freq_mhz; - - ddr_freq = get_ddr_freq(0); - ddr_freq_mhz = ddr_freq / 1000000; - - printf("Configuring DDR for %s MT/s data rate\n", - strmhz(buf, ddr_freq)); - - for (i = 0; fixed_ddr_parm_0[i].max_freq > 0; i++) { - if ((ddr_freq_mhz > fixed_ddr_parm_0[i].min_freq) && - (ddr_freq_mhz <= fixed_ddr_parm_0[i].max_freq)) { - memcpy(&ddr_cfg_regs, - fixed_ddr_parm_0[i].ddr_settings, - sizeof(ddr_cfg_regs)); - break; - } - } - - if (fixed_ddr_parm_0[i].max_freq == 0) - panic("Unsupported DDR data rate %s MT/s data rate\n", - strmhz(buf, ddr_freq)); - - ddr_size = (phys_size_t) CONFIG_SYS_SDRAM_SIZE * 1024 * 1024; - ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 0, 0); - -#if (CONFIG_SYS_NUM_DDR_CTLRS == 2) - memcpy(&ddr_cfg_regs, - fixed_ddr_parm_1[i].ddr_settings, - sizeof(ddr_cfg_regs)); - ddr_cfg_regs.ddr_cdr1 = DDR_CDR1_DHC_EN; - fsl_ddr_set_memctl_regs(&ddr_cfg_regs, 1, 0); -#endif - - /* - * setup laws for DDR. If not interleaving, presuming half memory on - * DDR1 and the other half on DDR2 - */ - if (fixed_ddr_parm_0[i].ddr_settings->cs[0].config & 0x20000000) { - if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, - ddr_size, - LAW_TRGT_IF_DDR_INTRLV) < 0) { - printf("ERROR setting Local Access Windows for DDR\n"); - return 0; - } - } else { -#if (CONFIG_SYS_NUM_DDR_CTLRS == 2) - /* We require both controllers have identical DIMMs */ - lawbar1_target_id = LAW_TRGT_IF_DDR_1; - if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, - ddr_size / 2, - lawbar1_target_id) < 0) { - printf("ERROR setting Local Access Windows for DDR\n"); - return 0; - } - lawbar1_target_id = LAW_TRGT_IF_DDR_2; - if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE + ddr_size / 2, - ddr_size / 2, - lawbar1_target_id) < 0) { - printf("ERROR setting Local Access Windows for DDR\n"); - return 0; - } -#else - lawbar1_target_id = LAW_TRGT_IF_DDR_1; - if (set_ddr_laws(CONFIG_SYS_DDR_SDRAM_BASE, - ddr_size, - lawbar1_target_id) < 0) { - printf("ERROR setting Local Access Windows for DDR\n"); - return 0; - } -#endif - } - return ddr_size; -} - -struct board_specific_parameters { - u32 n_ranks; - u32 datarate_mhz_high; - u32 clk_adjust; - u32 wrlvl_start; - u32 cpo; - u32 write_data_delay; - u32 force_2t; -}; - -/* - * This table contains all valid speeds we want to override with board - * specific parameters. datarate_mhz_high values need to be in ascending order - * for each n_ranks group. - */ -static const struct board_specific_parameters udimm0[] = { - /* - * memory controller 0 - * num| hi| clk| wrlvl | cpo |wrdata|2T - * ranks| mhz|adjst| start | |delay | - */ - {4, 850, 4, 6, 0xff, 2, 0}, - {4, 950, 5, 7, 0xff, 2, 0}, - {4, 1050, 5, 8, 0xff, 2, 0}, - {4, 1250, 5, 10, 0xff, 2, 0}, - {4, 1350, 5, 11, 0xff, 2, 0}, - {4, 1666, 5, 12, 0xff, 2, 0}, - {2, 850, 5, 6, 0xff, 2, 0}, - {2, 1050, 5, 7, 0xff, 2, 0}, - {2, 1250, 4, 6, 0xff, 2, 0}, - {2, 1350, 5, 7, 0xff, 2, 0}, - {2, 1666, 5, 8, 0xff, 2, 0}, - {1, 1250, 4, 6, 0xff, 2, 0}, - {1, 1335, 4, 7, 0xff, 2, 0}, - {1, 1666, 4, 8, 0xff, 2, 0}, - {} -}; - -/* - * The two slots have slightly different timing. The center values are good - * for both slots. We use identical speed tables for them. In future use, if - * DIMMs have fewer center values that require two separated tables, copy the - * udimm0 table to udimm1 and make changes to clk_adjust and wrlvl_start. - */ -static const struct board_specific_parameters *udimms[] = { - udimm0, - udimm0, -}; - -static const struct board_specific_parameters rdimm0[] = { - /* - * memory controller 0 - * num| hi| clk| wrlvl | cpo |wrdata|2T - * ranks| mhz|adjst| start | |delay | - */ - {4, 850, 4, 6, 0xff, 2, 0}, - {4, 950, 5, 7, 0xff, 2, 0}, - {4, 1050, 5, 8, 0xff, 2, 0}, - {4, 1250, 5, 10, 0xff, 2, 0}, - {4, 1350, 5, 11, 0xff, 2, 0}, - {4, 1666, 5, 12, 0xff, 2, 0}, - {2, 850, 4, 6, 0xff, 2, 0}, - {2, 1050, 4, 7, 0xff, 2, 0}, - {2, 1666, 4, 8, 0xff, 2, 0}, - {1, 850, 4, 5, 0xff, 2, 0}, - {1, 950, 4, 7, 0xff, 2, 0}, - {1, 1666, 4, 8, 0xff, 2, 0}, - {} -}; - -/* - * The two slots have slightly different timing. See comments above. - */ -static const struct board_specific_parameters *rdimms[] = { - rdimm0, - rdimm0, -}; - -void fsl_ddr_board_options(memctl_options_t *popts, - dimm_params_t *pdimm, - unsigned int ctrl_num) -{ - const struct board_specific_parameters *pbsp, *pbsp_highest = NULL; - ulong ddr_freq; - - if (ctrl_num > 1) { - printf("Wrong parameter for controller number %d", ctrl_num); - return; - } - if (!pdimm->n_ranks) - return; - - if (popts->registered_dimm_en) - pbsp = rdimms[ctrl_num]; - else - pbsp = udimms[ctrl_num]; - - - /* Get clk_adjust, cpo, write_data_delay,2T, according to the board ddr - * freqency and n_banks specified in board_specific_parameters table. - */ - ddr_freq = get_ddr_freq(0) / 1000000; - while (pbsp->datarate_mhz_high) { - if (pbsp->n_ranks == pdimm->n_ranks) { - if (ddr_freq <= pbsp->datarate_mhz_high) { - popts->cpo_override = pbsp->cpo; - popts->write_data_delay = - pbsp->write_data_delay; - popts->clk_adjust = pbsp->clk_adjust; - popts->wrlvl_start = pbsp->wrlvl_start; - popts->twot_en = pbsp->force_2t; - goto found; - } - pbsp_highest = pbsp; - } - pbsp++; - } - - if (pbsp_highest) { - printf("Error: board specific timing not found " - "for data rate %lu MT/s!\n" - "Trying to use the highest speed (%u) parameters\n", - ddr_freq, pbsp_highest->datarate_mhz_high); - popts->cpo_override = pbsp_highest->cpo; - popts->write_data_delay = pbsp_highest->write_data_delay; - popts->clk_adjust = pbsp_highest->clk_adjust; - popts->wrlvl_start = pbsp_highest->wrlvl_start; - popts->twot_en = pbsp_highest->force_2t; - } else { - panic("DIMM is not supported by this board"); - } -found: - /* - * Factors to consider for half-strength driver enable: - * - number of DIMMs installed - */ - popts->half_strength_driver_enable = 0; - /* - * Write leveling override - */ - popts->wrlvl_override = 1; - popts->wrlvl_sample = 0xf; - - /* - * Rtt and Rtt_WR override - */ - popts->rtt_override = 0; - - /* Enable ZQ calibration */ - popts->zq_en = 1; - - /* DHC_EN =1, ODT = 60 Ohm */ - popts->ddr_cdr1 = DDR_CDR1_DHC_EN; -} - -int dram_init(void) -{ - phys_size_t dram_size; - - puts("Initializing...."); - - if (fsl_use_spd()) { - puts("using SPD\n"); - dram_size = fsl_ddr_sdram(); - } else { - puts("using fixed parameters\n"); - dram_size = fixed_sdram(); - } - - dram_size = setup_ddr_tlbs(dram_size / 0x100000); - dram_size *= 0x100000; - - debug(" DDR: "); - gd->ram_size = dram_size; - - return 0; -} diff --git a/board/freescale/corenet_ds/eth_hydra.c b/board/freescale/corenet_ds/eth_hydra.c deleted file mode 100644 index a27e905ace..0000000000 --- a/board/freescale/corenet_ds/eth_hydra.c +++ /dev/null @@ -1,526 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - * Author: Timur Tabi - */ - -/* - * This file handles the board muxing between the Fman Ethernet MACs and - * the RGMII/SGMII/XGMII PHYs on a Freescale P3041/P5020 "Hydra" reference - * board. The RGMII PHYs are the two on-board 1Gb ports. The SGMII PHYs are - * provided by the standard Freescale four-port SGMII riser card. The 10Gb - * XGMII PHY is provided via the XAUI riser card. Since there is only one - * Fman device on a P3041 and P5020, we only support one SGMII card and one - * RGMII card. - * - * Muxing is handled via the PIXIS BRDCFG1 register. The EMI1 bits control - * muxing among the RGMII PHYs and the SGMII PHYs. The value for RGMII is - * always the same (0). The value for SGMII depends on which slot the riser is - * inserted in. The EMI2 bits control muxing for the the XGMII. Like SGMII, - * the value is based on which slot the XAUI is inserted in. - * - * The SERDES configuration is used to determine where the SGMII and XAUI cards - * exist, and also which Fman MACs are routed to which PHYs. So for a given - * Fman MAC, there is one and only PHY it connects to. MACs cannot be routed - * to PHYs dynamically. - * - * - * This file also updates the device tree in three ways: - * - * 1) The status of each virtual MDIO node that is referenced by an Ethernet - * node is set to "okay". - * - * 2) The phy-handle property of each active Ethernet MAC node is set to the - * appropriate PHY node. - * - * 3) The "mux value" for each virtual MDIO node is set to the correct value, - * if necessary. Some virtual MDIO nodes do not have configurable mux - * values, so those values are hard-coded in the DTS. On the HYDRA board, - * the virtual MDIO node for the SGMII card needs to be updated. - * - * For all this to work, the device tree needs to have the following: - * - * 1) An alias for each PHY node that an Ethernet node could be routed to. - * - * 2) An alias for each real and virtual MDIO node that is disabled by default - * and might need to be enabled, and also might need to have its mux-value - * updated. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "../common/ngpixis.h" -#include "../common/fman.h" - -#ifdef CONFIG_FMAN_ENET - -#define BRDCFG1_EMI1_SEL_MASK 0x78 -#define BRDCFG1_EMI1_SEL_SLOT1 0x10 -#define BRDCFG1_EMI1_SEL_SLOT2 0x20 -#define BRDCFG1_EMI1_SEL_SLOT5 0x30 -#define BRDCFG1_EMI1_SEL_SLOT6 0x40 -#define BRDCFG1_EMI1_SEL_SLOT7 0x50 -#define BRDCFG1_EMI1_SEL_RGMII 0x00 -#define BRDCFG1_EMI1_EN 0x08 -#define BRDCFG1_EMI2_SEL_MASK 0x06 -#define BRDCFG1_EMI2_SEL_SLOT1 0x00 -#define BRDCFG1_EMI2_SEL_SLOT2 0x02 - -#define BRDCFG2_REG_GPIO_SEL 0x20 - -#define PHY_BASE_ADDR 0x00 - -/* - * BRDCFG1 mask and value for each MAC - * - * This array contains the BRDCFG1 values (in mask/val format) that route the - * MDIO bus to a particular RGMII or SGMII PHY. - */ -struct { - u8 mask; - u8 val; -} mdio_mux[NUM_FM_PORTS]; - -/* - * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means - * that the mapping must be determined dynamically, or that the lane maps to - * something other than a board slot - */ -static u8 lane_to_slot[] = { - 7, 7, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0 -}; - -/* - * Set the board muxing for a given MAC - * - * The MDIO layer calls this function every time it wants to talk to a PHY. - */ -void hydra_mux_mdio(u8 mask, u8 val) -{ - clrsetbits_8(&pixis->brdcfg1, mask, val); -} - -struct hydra_mdio { - u8 mask; - u8 val; - struct mii_dev *realbus; -}; - -static int hydra_mdio_read(struct mii_dev *bus, int addr, int devad, - int regnum) -{ - struct hydra_mdio *priv = bus->priv; - - hydra_mux_mdio(priv->mask, priv->val); - - return priv->realbus->read(priv->realbus, addr, devad, regnum); -} - -static int hydra_mdio_write(struct mii_dev *bus, int addr, int devad, - int regnum, u16 value) -{ - struct hydra_mdio *priv = bus->priv; - - hydra_mux_mdio(priv->mask, priv->val); - - return priv->realbus->write(priv->realbus, addr, devad, regnum, value); -} - -static int hydra_mdio_reset(struct mii_dev *bus) -{ - struct hydra_mdio *priv = bus->priv; - - return priv->realbus->reset(priv->realbus); -} - -static void hydra_mdio_set_mux(char *name, u8 mask, u8 val) -{ - struct mii_dev *bus = miiphy_get_dev_by_name(name); - struct hydra_mdio *priv = bus->priv; - - priv->mask = mask; - priv->val = val; -} - -static int hydra_mdio_init(char *realbusname, char *fakebusname) -{ - struct hydra_mdio *hmdio; - struct mii_dev *bus = mdio_alloc(); - - if (!bus) { - printf("Failed to allocate Hydra MDIO bus\n"); - return -1; - } - - hmdio = malloc(sizeof(*hmdio)); - if (!hmdio) { - printf("Failed to allocate Hydra private data\n"); - free(bus); - return -1; - } - - bus->read = hydra_mdio_read; - bus->write = hydra_mdio_write; - bus->reset = hydra_mdio_reset; - strcpy(bus->name, fakebusname); - - hmdio->realbus = miiphy_get_dev_by_name(realbusname); - - if (!hmdio->realbus) { - printf("No bus with name %s\n", realbusname); - free(bus); - free(hmdio); - return -1; - } - - bus->priv = hmdio; - - return mdio_register(bus); -} - -/* - * Given an alias or a path for a node, set the mux value of that node. - * - * If 'alias' is not a valid alias, then it is treated as a full path to the - * node. No error checking is performed. - * - * This function is normally called to set the fsl,hydra-mdio-muxval property - * of a virtual MDIO node. - */ -static void fdt_set_mdio_mux(void *fdt, const char *alias, u32 mux) -{ - const char *path = fdt_get_alias(fdt, alias); - - if (!path) - path = alias; - - do_fixup_by_path(fdt, path, "reg", - &mux, sizeof(mux), 1); - do_fixup_by_path(fdt, path, "fsl,hydra-mdio-muxval", - &mux, sizeof(mux), 1); -} - -/* - * Given the following ... - * - * 1) A pointer to an Fman Ethernet node (as identified by the 'compat' - * compatible string and 'addr' physical address) - * - * 2) An Fman port - * - * ... update the phy-handle property of the Ethernet node to point to the - * right PHY. This assumes that we already know the PHY for each port. That - * information is stored in mdio_mux[]. - * - * The offset of the Fman Ethernet node is also passed in for convenience, but - * it is not used, and we recalculate the offset anyway. - * - * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC. - * Inside the Fman, "ports" are things that connect to MACs. We only call them - * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs - * and ports are the same thing. - * - * Note that this code would be cleaner if had a function called - * fm_info_get_phy_address(), which returns a value from the fm1_dtsec_info[] - * array. That's because all we're doing is figuring out the PHY address for - * a given Fman MAC and writing it to the device tree. Well, we already did - * the hard work to figure that out in board_eth_init(), so it's silly to - * repeat that here. - */ -void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, - enum fm_port port, int offset) -{ - unsigned int mux = mdio_mux[port].val & mdio_mux[port].mask; - char phy[16]; - - if (port == FM1_10GEC1) { - /* XAUI */ - int lane = serdes_get_first_lane(XAUI_FM1); - if (lane >= 0) { - /* The XAUI PHY is identified by the slot */ - sprintf(phy, "phy_xgmii_%u", lane_to_slot[lane]); - fdt_set_phy_handle(fdt, compat, addr, phy); - } - return; - } - - if (mux == (BRDCFG1_EMI1_SEL_RGMII | BRDCFG1_EMI1_EN)) { - /* RGMII */ - /* The RGMII PHY is identified by the MAC connected to it */ - sprintf(phy, "phy_rgmii_%u", port == FM1_DTSEC4 ? 0 : 1); - fdt_set_phy_handle(fdt, compat, addr, phy); - return; - } - - /* If it's not RGMII or XGMII, it must be SGMII */ - if (mux) { - /* The SGMII PHY is identified by the MAC connected to it */ - sprintf(phy, "phy_sgmii_%x", - CONFIG_SYS_FM1_DTSEC1_PHY_ADDR + (port - FM1_DTSEC1)); - fdt_set_phy_handle(fdt, compat, addr, phy); - } -} - -#define PIXIS_SW2_LANE_23_SEL 0x80 -#define PIXIS_SW2_LANE_45_SEL 0x40 -#define PIXIS_SW2_LANE_67_SEL_MASK 0x30 -#define PIXIS_SW2_LANE_67_SEL_5 0x00 -#define PIXIS_SW2_LANE_67_SEL_6 0x20 -#define PIXIS_SW2_LANE_67_SEL_7 0x10 -#define PIXIS_SW2_LANE_8_SEL 0x08 -#define PIXIS_SW2_LANE_1617_SEL 0x04 - -/* - * Initialize the lane_to_slot[] array. - * - * On the P4080DS "Expedition" board, the mapping of SERDES lanes to board - * slots is hard-coded. On the Hydra board, however, the mapping is controlled - * by board switch SW2, so the lane_to_slot[] array needs to be dynamically - * initialized. - */ -static void initialize_lane_to_slot(void) -{ - u8 sw2 = in_8(&PIXIS_SW(2)); - - lane_to_slot[2] = (sw2 & PIXIS_SW2_LANE_23_SEL) ? 7 : 4; - lane_to_slot[3] = lane_to_slot[2]; - - lane_to_slot[4] = (sw2 & PIXIS_SW2_LANE_45_SEL) ? 7 : 6; - lane_to_slot[5] = lane_to_slot[4]; - - switch (sw2 & PIXIS_SW2_LANE_67_SEL_MASK) { - case PIXIS_SW2_LANE_67_SEL_5: - lane_to_slot[6] = 5; - break; - case PIXIS_SW2_LANE_67_SEL_6: - lane_to_slot[6] = 6; - break; - case PIXIS_SW2_LANE_67_SEL_7: - lane_to_slot[6] = 7; - break; - } - lane_to_slot[7] = lane_to_slot[6]; - - lane_to_slot[8] = (sw2 & PIXIS_SW2_LANE_8_SEL) ? 3 : 0; - - lane_to_slot[16] = (sw2 & PIXIS_SW2_LANE_1617_SEL) ? 1 : 0; - lane_to_slot[17] = lane_to_slot[16]; -} - -#endif /* #ifdef CONFIG_FMAN_ENET */ - -/* - * Configure the status for the virtual MDIO nodes - * - * Rather than create the virtual MDIO nodes from scratch for each active - * virtual MDIO, we expect the DTS to have the nodes defined already, and we - * only enable the ones that are actually active. - * - * We assume that the DTS already hard-codes the status for all the - * virtual MDIO nodes to "disabled", so all we need to do is enable the - * active ones. - * - * For SGMII, we also need to set the mux value in the node. - */ -void fdt_fixup_board_enet(void *fdt) -{ -#ifdef CONFIG_FMAN_ENET - unsigned int i; - int lane; - - for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { - int idx = i - FM1_DTSEC1; - - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx); - if (lane >= 0) { - fdt_status_okay_by_alias(fdt, "emi1_sgmii"); - /* Also set the MUX value */ - fdt_set_mdio_mux(fdt, "emi1_sgmii", - mdio_mux[i].val); - } - break; - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_TXID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_ID: - fdt_status_okay_by_alias(fdt, "emi1_rgmii"); - break; - default: - break; - } - } - - lane = serdes_get_first_lane(XAUI_FM1); - if (lane >= 0) - fdt_status_okay_by_alias(fdt, "emi2_xgmii"); -#endif -} - -int board_eth_init(struct bd_info *bis) -{ -#ifdef CONFIG_FMAN_ENET - struct fsl_pq_mdio_info dtsec_mdio_info; - struct tgec_mdio_info tgec_mdio_info; - unsigned int i, slot; - int lane; - struct mii_dev *bus; - - printf("Initializing Fman\n"); - - initialize_lane_to_slot(); - - /* We want to use the PIXIS to configure MUX routing, not GPIOs. */ - setbits_8(&pixis->brdcfg2, BRDCFG2_REG_GPIO_SEL); - - memset(mdio_mux, 0, sizeof(mdio_mux)); - - dtsec_mdio_info.regs = - (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR; - dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; - - /* Register the real 1G MDIO bus */ - fsl_pq_mdio_init(bis, &dtsec_mdio_info); - - tgec_mdio_info.regs = - (struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; - tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; - - /* Register the real 10G MDIO bus */ - fm_tgec_mdio_init(bis, &tgec_mdio_info); - - /* Register the three virtual MDIO front-ends */ - hydra_mdio_init(DEFAULT_FM_MDIO_NAME, "HYDRA_RGMII_MDIO"); - hydra_mdio_init(DEFAULT_FM_MDIO_NAME, "HYDRA_SGMII_MDIO"); - - /* - * Program the DTSEC PHY addresses assuming that they are all SGMII. - * For any DTSEC that's RGMII, we'll override its PHY address later. - * We assume that DTSEC5 is only used for RGMII. - */ - fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC4_PHY_ADDR); - - for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { - int idx = i - FM1_DTSEC1; - - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx); - if (lane < 0) - break; - slot = lane_to_slot[lane]; - mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK; - switch (slot) { - case 1: - /* Always DTSEC5 on Bank 3 */ - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 | - BRDCFG1_EMI1_EN; - break; - case 2: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 | - BRDCFG1_EMI1_EN; - break; - case 5: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 | - BRDCFG1_EMI1_EN; - break; - case 6: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 | - BRDCFG1_EMI1_EN; - break; - case 7: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 | - BRDCFG1_EMI1_EN; - break; - }; - - hydra_mdio_set_mux("HYDRA_SGMII_MDIO", - mdio_mux[i].mask, mdio_mux[i].val); - fm_info_set_mdio(i, - miiphy_get_dev_by_name("HYDRA_SGMII_MDIO")); - break; - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_TXID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_ID: - /* - * If DTSEC4 is RGMII, then it's routed via via EC1 to - * the first on-board RGMII port. If DTSEC5 is RGMII, - * then it's routed via via EC2 to the second on-board - * RGMII port. The other DTSECs cannot be routed to - * RGMII. - */ - fm_info_set_phy_address(i, i == FM1_DTSEC4 ? 0 : 1); - mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK; - mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII | - BRDCFG1_EMI1_EN; - hydra_mdio_set_mux("HYDRA_RGMII_MDIO", - mdio_mux[i].mask, mdio_mux[i].val); - fm_info_set_mdio(i, - miiphy_get_dev_by_name("HYDRA_RGMII_MDIO")); - break; - case PHY_INTERFACE_MODE_NA: - fm_info_set_phy_address(i, 0); - break; - default: - printf("Fman1: DTSEC%u set to unknown interface %i\n", - idx + 1, fm_info_get_enet_if(i)); - fm_info_set_phy_address(i, 0); - break; - } - } - - bus = miiphy_get_dev_by_name("HYDRA_SGMII_MDIO"); - set_sgmii_phy(bus, FM1_DTSEC1, CONFIG_SYS_NUM_FM1_DTSEC, PHY_BASE_ADDR); - - /* - * For 10G, we only support one XAUI card per Fman. If present, then we - * force its routing and never touch those bits again, which removes the - * need for Linux to do any muxing. This works because of the way - * BRDCFG1 is defined, but it's a bit hackish. - * - * The PHY address for the XAUI card depends on which slot it's in. The - * macros we use imply that the PHY address is based on which FM, but - * that's not true. On the P4080DS, FM1 could only use XAUI in slot 5, - * and FM2 could only use a XAUI in slot 4. On the Hydra board, we - * check the actual slot and just use the macros as-is, even though - * the P3041 and P5020 only have one Fman. - */ - lane = serdes_get_first_lane(XAUI_FM1); - if (lane >= 0) { - slot = lane_to_slot[lane]; - if (slot == 1) { - /* XAUI card is in slot 1 */ - clrsetbits_8(&pixis->brdcfg1, BRDCFG1_EMI2_SEL_MASK, - BRDCFG1_EMI2_SEL_SLOT1); - fm_info_set_phy_address(FM1_10GEC1, - CONFIG_SYS_FM1_10GEC1_PHY_ADDR); - } else { - /* XAUI card is in slot 2 */ - clrsetbits_8(&pixis->brdcfg1, BRDCFG1_EMI2_SEL_MASK, - BRDCFG1_EMI2_SEL_SLOT2); - fm_info_set_phy_address(FM1_10GEC1, - CONFIG_SYS_FM2_10GEC1_PHY_ADDR); - } - } - - fm_info_set_mdio(FM1_10GEC1, - miiphy_get_dev_by_name(DEFAULT_FM_TGEC_MDIO_NAME)); - - cpu_eth_init(bis); -#endif - - return pci_eth_init(bis); -} diff --git a/board/freescale/corenet_ds/eth_p4080.c b/board/freescale/corenet_ds/eth_p4080.c deleted file mode 100644 index df5a69bcba..0000000000 --- a/board/freescale/corenet_ds/eth_p4080.c +++ /dev/null @@ -1,489 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "../common/ngpixis.h" -#include "../common/fman.h" -#include - -#define EMI_NONE 0xffffffff -#define EMI_MASK 0xf0000000 -#define EMI1_RGMII 0x0 -#define EMI1_SLOT3 0x80000000 /* bank1 EFGH */ -#define EMI1_SLOT4 0x40000000 /* bank2 ABCD */ -#define EMI1_SLOT5 0xc0000000 /* bank3 ABCD */ -#define EMI2_SLOT4 0x10000000 /* bank2 ABCD */ -#define EMI2_SLOT5 0x30000000 /* bank3 ABCD */ -#define EMI1_MASK 0xc0000000 -#define EMI2_MASK 0x30000000 - -#define PHY_BASE_ADDR 0x00 -#define PHY_BASE_ADDR_SLOT5 0x10 - -static int mdio_mux[NUM_FM_PORTS]; - -static char *mdio_names[16] = { - "P4080DS_MDIO0", - "P4080DS_MDIO1", - NULL, - "P4080DS_MDIO3", - "P4080DS_MDIO4", - NULL, NULL, NULL, - "P4080DS_MDIO8", - NULL, NULL, NULL, - "P4080DS_MDIO12", - NULL, NULL, NULL, -}; - -/* - * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means - * that the mapping must be determined dynamically, or that the lane maps to - * something other than a board slot. - */ -static u8 lane_to_slot[] = { - 1, 1, 2, 2, 3, 3, 3, 3, 6, 6, 4, 4, 4, 4, 5, 5, 5, 5 -}; - -static char *p4080ds_mdio_name_for_muxval(u32 muxval) -{ - return mdio_names[(muxval & EMI_MASK) >> 28]; -} - -struct mii_dev *mii_dev_for_muxval(u32 muxval) -{ - struct mii_dev *bus; - char *name = p4080ds_mdio_name_for_muxval(muxval); - - if (!name) { - printf("No bus for muxval %x\n", muxval); - return NULL; - } - - bus = miiphy_get_dev_by_name(name); - - if (!bus) { - printf("No bus by name %s\n", name); - return NULL; - } - - return bus; -} - -#if defined(CONFIG_SYS_P4080_ERRATUM_SERDES9) && defined(CONFIG_PHY_TERANETICS) -int board_phy_config(struct phy_device *phydev) -{ - if (phydev->drv->config) - phydev->drv->config(phydev); - if (phydev->drv->uid == PHY_UID_TN2020) { - unsigned long timeout = 1 * 1000; /* 1 seconds */ - enum srds_prtcl device; - - /* - * Wait for the XAUI to come out of reset. This is when it - * starts transmitting alignment signals. - */ - while (--timeout) { - int reg = phy_read(phydev, MDIO_MMD_PHYXS, MDIO_CTRL1); - if (reg < 0) { - printf("TN2020: Error reading from PHY at " - "address %u\n", phydev->addr); - break; - } - /* - * Note that we've never actually seen - * MDIO_CTRL1_RESET set to 1. - */ - if ((reg & MDIO_CTRL1_RESET) == 0) - break; - udelay(1000); - } - - if (!timeout) { - printf("TN2020: Timeout waiting for PHY at address %u " - " to reset.\n", phydev->addr); - } - - switch (phydev->addr) { - case CONFIG_SYS_FM1_10GEC1_PHY_ADDR: - device = XAUI_FM1; - break; - case CONFIG_SYS_FM2_10GEC1_PHY_ADDR: - device = XAUI_FM2; - break; - default: - device = NONE; - } - - serdes_reset_rx(device); - } - - return 0; -} -#endif - -struct p4080ds_mdio { - u32 muxval; - struct mii_dev *realbus; -}; - -static void p4080ds_mux_mdio(u32 muxval) -{ - ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - uint gpioval = in_be32(&pgpio->gpdat) & ~(EMI_MASK); - gpioval |= muxval; - - out_be32(&pgpio->gpdat, gpioval); -} - -static int p4080ds_mdio_read(struct mii_dev *bus, int addr, int devad, - int regnum) -{ - struct p4080ds_mdio *priv = bus->priv; - - p4080ds_mux_mdio(priv->muxval); - - return priv->realbus->read(priv->realbus, addr, devad, regnum); -} - -static int p4080ds_mdio_write(struct mii_dev *bus, int addr, int devad, - int regnum, u16 value) -{ - struct p4080ds_mdio *priv = bus->priv; - - p4080ds_mux_mdio(priv->muxval); - - return priv->realbus->write(priv->realbus, addr, devad, regnum, value); -} - -static int p4080ds_mdio_reset(struct mii_dev *bus) -{ - struct p4080ds_mdio *priv = bus->priv; - - return priv->realbus->reset(priv->realbus); -} - -static int p4080ds_mdio_init(char *realbusname, u32 muxval) -{ - struct p4080ds_mdio *pmdio; - struct mii_dev *bus = mdio_alloc(); - - if (!bus) { - printf("Failed to allocate P4080DS MDIO bus\n"); - return -1; - } - - pmdio = malloc(sizeof(*pmdio)); - if (!pmdio) { - printf("Failed to allocate P4080DS private data\n"); - free(bus); - return -1; - } - - bus->read = p4080ds_mdio_read; - bus->write = p4080ds_mdio_write; - bus->reset = p4080ds_mdio_reset; - sprintf(bus->name, p4080ds_mdio_name_for_muxval(muxval)); - - pmdio->realbus = miiphy_get_dev_by_name(realbusname); - - if (!pmdio->realbus) { - printf("No bus with name %s\n", realbusname); - free(bus); - free(pmdio); - return -1; - } - - pmdio->muxval = muxval; - bus->priv = pmdio; - - return mdio_register(bus); -} - -void board_ft_fman_fixup_port(void *blob, char * prop, phys_addr_t pa, - enum fm_port port, int offset) -{ - if (mdio_mux[port] == EMI1_RGMII) - fdt_set_phy_handle(blob, prop, pa, "phy_rgmii"); - - if (mdio_mux[port] == EMI1_SLOT3) { - int idx = port - FM2_DTSEC1 + 5; - char phy[16]; - - sprintf(phy, "phy%d_slot3", idx); - - fdt_set_phy_handle(blob, prop, pa, phy); - } -} - -void fdt_fixup_board_enet(void *fdt) -{ - int i; - - /* - * P4080DS can be configured in many different ways, supporting a number - * of combinations of ethernet devices and phy types. In order to - * have just one device tree for all of those configurations, we fix up - * the tree here. By default, the device tree configures FM1 and FM2 - * for SGMII, and configures XAUI on both 10G interfaces. So we have - * a number of different variables to track: - * - * 1) Whether the device is configured at all. Whichever devices are - * not enabled should be disabled by setting the "status" property - * to "disabled". - * 2) What the PHY interface is. If this is an RGMII connection, - * we should change the "phy-connection-type" property to - * "rgmii" - * 3) Which PHY is being used. Because the MDIO buses are muxed, - * we need to redirect the "phy-handle" property to point at the - * PHY on the right slot/bus. - */ - - /* We've got six MDIO nodes that may or may not need to exist */ - fdt_status_disabled_by_alias(fdt, "emi1_slot3"); - fdt_status_disabled_by_alias(fdt, "emi1_slot4"); - fdt_status_disabled_by_alias(fdt, "emi1_slot5"); - fdt_status_disabled_by_alias(fdt, "emi2_slot4"); - fdt_status_disabled_by_alias(fdt, "emi2_slot5"); - - for (i = 0; i < NUM_FM_PORTS; i++) { - switch (mdio_mux[i]) { - case EMI1_SLOT3: - fdt_status_okay_by_alias(fdt, "emi1_slot3"); - break; - case EMI1_SLOT4: - fdt_status_okay_by_alias(fdt, "emi1_slot4"); - break; - case EMI1_SLOT5: - fdt_status_okay_by_alias(fdt, "emi1_slot5"); - break; - case EMI2_SLOT4: - fdt_status_okay_by_alias(fdt, "emi2_slot4"); - break; - case EMI2_SLOT5: - fdt_status_okay_by_alias(fdt, "emi2_slot5"); - break; - } - } -} - -int board_eth_init(struct bd_info *bis) -{ -#ifdef CONFIG_FMAN_ENET - ccsr_gpio_t *pgpio = (void *)(CONFIG_SYS_MPC85xx_GPIO_ADDR); - int i; - struct fsl_pq_mdio_info dtsec_mdio_info; - struct tgec_mdio_info tgec_mdio_info; - struct mii_dev *bus; - - /* Initialize the mdio_mux array so we can recognize empty elements */ - for (i = 0; i < NUM_FM_PORTS; i++) - mdio_mux[i] = EMI_NONE; - - /* The first 4 GPIOs are outputs to control MDIO bus muxing */ - out_be32(&pgpio->gpdir, EMI_MASK); - - dtsec_mdio_info.regs = - (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR; - dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; - - /* Register the 1G MDIO bus */ - fsl_pq_mdio_init(bis, &dtsec_mdio_info); - - tgec_mdio_info.regs = - (struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; - tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; - - /* Register the 10G MDIO bus */ - fm_tgec_mdio_init(bis, &tgec_mdio_info); - - /* Register the 6 muxing front-ends to the MDIO buses */ - p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_RGMII); - p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT3); - p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4); - p4080ds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5); - p4080ds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2_SLOT4); - p4080ds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2_SLOT5); - - fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC3, CONFIG_SYS_FM1_DTSEC3_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC4, CONFIG_SYS_FM1_DTSEC4_PHY_ADDR); - fm_info_set_phy_address(FM1_10GEC1, CONFIG_SYS_FM1_10GEC1_PHY_ADDR); - -#if (CONFIG_SYS_NUM_FMAN == 2) - fm_info_set_phy_address(FM2_DTSEC1, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC2, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC3, CONFIG_SYS_FM2_DTSEC3_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, CONFIG_SYS_FM2_DTSEC4_PHY_ADDR); - fm_info_set_phy_address(FM2_10GEC1, CONFIG_SYS_FM2_10GEC1_PHY_ADDR); -#endif - - for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { - int idx = i - FM1_DTSEC1, lane, slot; - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx); - if (lane < 0) - break; - slot = lane_to_slot[lane]; - switch (slot) { - case 3: - mdio_mux[i] = EMI1_SLOT3; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - case 4: - mdio_mux[i] = EMI1_SLOT4; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - case 5: - mdio_mux[i] = EMI1_SLOT5; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - }; - break; - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_TXID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_ID: - fm_info_set_phy_address(i, 0); - mdio_mux[i] = EMI1_RGMII; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - default: - break; - } - } - bus = mii_dev_for_muxval(EMI1_SLOT5); - set_sgmii_phy(bus, FM1_DTSEC1, - CONFIG_SYS_NUM_FM1_DTSEC, PHY_BASE_ADDR_SLOT5); - - for (i = FM1_10GEC1; i < FM1_10GEC1 + CONFIG_SYS_NUM_FM1_10GEC; i++) { - int idx = i - FM1_10GEC1, lane, slot; - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_XGMII: - lane = serdes_get_first_lane(XAUI_FM1 + idx); - if (lane < 0) - break; - slot = lane_to_slot[lane]; - switch (slot) { - case 4: - mdio_mux[i] = EMI2_SLOT4; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - case 5: - mdio_mux[i] = EMI2_SLOT5; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - }; - break; - default: - break; - } - } - -#if (CONFIG_SYS_NUM_FMAN == 2) - for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { - int idx = i - FM2_DTSEC1, lane, slot; - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx); - if (lane < 0) - break; - slot = lane_to_slot[lane]; - switch (slot) { - case 3: - mdio_mux[i] = EMI1_SLOT3; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - case 4: - mdio_mux[i] = EMI1_SLOT4; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - case 5: - mdio_mux[i] = EMI1_SLOT5; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - }; - break; - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_TXID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_ID: - fm_info_set_phy_address(i, 0); - mdio_mux[i] = EMI1_RGMII; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - default: - break; - } - } - - bus = mii_dev_for_muxval(EMI1_SLOT3); - set_sgmii_phy(bus, FM2_DTSEC1, CONFIG_SYS_NUM_FM2_DTSEC, PHY_BASE_ADDR); - bus = mii_dev_for_muxval(EMI1_SLOT4); - set_sgmii_phy(bus, FM2_DTSEC1, CONFIG_SYS_NUM_FM2_DTSEC, PHY_BASE_ADDR); - - for (i = FM2_10GEC1; i < FM2_10GEC1 + CONFIG_SYS_NUM_FM2_10GEC; i++) { - int idx = i - FM2_10GEC1, lane, slot; - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_XGMII: - lane = serdes_get_first_lane(XAUI_FM2 + idx); - if (lane < 0) - break; - slot = lane_to_slot[lane]; - switch (slot) { - case 4: - mdio_mux[i] = EMI2_SLOT4; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - case 5: - mdio_mux[i] = EMI2_SLOT5; - fm_info_set_mdio(i, - mii_dev_for_muxval(mdio_mux[i])); - break; - }; - break; - default: - break; - } - } -#endif - - cpu_eth_init(bis); -#endif /* CONFIG_FMAN_ENET */ - - return pci_eth_init(bis); -} diff --git a/board/freescale/corenet_ds/eth_superhydra.c b/board/freescale/corenet_ds/eth_superhydra.c deleted file mode 100644 index 55bac0f761..0000000000 --- a/board/freescale/corenet_ds/eth_superhydra.c +++ /dev/null @@ -1,783 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - * Author: Srikanth Srinivasan - */ - -/* - * This file handles the board muxing between the Fman Ethernet MACs and - * the RGMII/SGMII/XGMII PHYs on a Freescale P5040 "Super Hydra" reference - * board. The RGMII PHYs are the two on-board 1Gb ports. The SGMII PHYs are - * provided by the standard Freescale four-port SGMII riser card. The 10Gb - * XGMII PHYs are provided via the XAUI riser card. The P5040 has 2 FMans - * and 5 1G interfaces and 10G interface per FMan. Based on the options in - * the RCW, we could have upto 3 SGMII cards and 1 XAUI card at a time. - * - * Muxing is handled via the PIXIS BRDCFG1 register. The EMI1 bits control - * muxing among the RGMII PHYs and the SGMII PHYs. The value for RGMII is - * always the same (0). The value for SGMII depends on which slot the riser is - * inserted in. The EMI2 bits control muxing for the the XGMII. Like SGMII, - * the value is based on which slot the XAUI is inserted in. - * - * The SERDES configuration is used to determine where the SGMII and XAUI cards - * exist, and also which Fman's MACs are routed to which PHYs. So for a given - * Fman MAC, there is one and only PHY it connects to. MACs cannot be routed - * to PHYs dynamically. - * - * - * This file also updates the device tree in three ways: - * - * 1) The status of each virtual MDIO node that is referenced by an Ethernet - * node is set to "okay". - * - * 2) The phy-handle property of each active Ethernet MAC node is set to the - * appropriate PHY node. - * - * 3) The "mux value" for each virtual MDIO node is set to the correct value, - * if necessary. Some virtual MDIO nodes do not have configurable mux - * values, so those values are hard-coded in the DTS. On the HYDRA board, - * the virtual MDIO node for the SGMII card needs to be updated. - * - * For all this to work, the device tree needs to have the following: - * - * 1) An alias for each PHY node that an Ethernet node could be routed to. - * - * 2) An alias for each real and virtual MDIO node that is disabled by default - * and might need to be enabled, and also might need to have its mux-value - * updated. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "../common/ngpixis.h" -#include "../common/fman.h" - -#ifdef CONFIG_FMAN_ENET - -#define BRDCFG1_EMI1_SEL_MASK 0x70 -#define BRDCFG1_EMI1_SEL_SLOT1 0x10 -#define BRDCFG1_EMI1_SEL_SLOT2 0x20 -#define BRDCFG1_EMI1_SEL_SLOT5 0x30 -#define BRDCFG1_EMI1_SEL_SLOT6 0x40 -#define BRDCFG1_EMI1_SEL_SLOT7 0x50 -#define BRDCFG1_EMI1_SEL_SLOT3 0x60 -#define BRDCFG1_EMI1_SEL_RGMII 0x00 -#define BRDCFG1_EMI1_EN 0x08 -#define BRDCFG1_EMI2_SEL_MASK 0x06 -#define BRDCFG1_EMI2_SEL_SLOT1 0x00 -#define BRDCFG1_EMI2_SEL_SLOT2 0x02 - -#define BRDCFG2_REG_GPIO_SEL 0x20 - -/* SGMII */ -#define PHY_BASE_ADDR 0x00 -#define REGNUM 0x00 -#define PORT_NUM_FM1 0x04 -#define PORT_NUM_FM2 0x02 - -/* - * BRDCFG1 mask and value for each MAC - * - * This array contains the BRDCFG1 values (in mask/val format) that route the - * MDIO bus to a particular RGMII or SGMII PHY. - */ -static struct { - u8 mask; - u8 val; -} mdio_mux[NUM_FM_PORTS]; - -/* - * Mapping of all 18 SERDES lanes to board slots. A value of '0' here means - * that the mapping must be determined dynamically, or that the lane maps to - * something other than a board slot - */ -static u8 lane_to_slot[] = { - 7, 7, 0, 0, 0, 0, 0, 0, 0, 0, 2, 2, 2, 2, 1, 1, 0, 0, 0, 0 -}; - -/* - * Set the board muxing for a given MAC - * - * The MDIO layer calls this function every time it wants to talk to a PHY. - */ -void super_hydra_mux_mdio(u8 mask, u8 val) -{ - clrsetbits_8(&pixis->brdcfg1, mask, val); -} - -struct super_hydra_mdio { - u8 mask; - u8 val; - struct mii_dev *realbus; -}; - -static int super_hydra_mdio_read(struct mii_dev *bus, int addr, int devad, - int regnum) -{ - struct super_hydra_mdio *priv = bus->priv; - - super_hydra_mux_mdio(priv->mask, priv->val); - - return priv->realbus->read(priv->realbus, addr, devad, regnum); -} - -static int super_hydra_mdio_write(struct mii_dev *bus, int addr, int devad, - int regnum, u16 value) -{ - struct super_hydra_mdio *priv = bus->priv; - - super_hydra_mux_mdio(priv->mask, priv->val); - - return priv->realbus->write(priv->realbus, addr, devad, regnum, value); -} - -static int super_hydra_mdio_reset(struct mii_dev *bus) -{ - struct super_hydra_mdio *priv = bus->priv; - - return priv->realbus->reset(priv->realbus); -} - -static void super_hydra_mdio_set_mux(char *name, u8 mask, u8 val) -{ - struct mii_dev *bus = miiphy_get_dev_by_name(name); - struct super_hydra_mdio *priv = bus->priv; - - priv->mask = mask; - priv->val = val; -} - -static int super_hydra_mdio_init(char *realbusname, char *fakebusname) -{ - struct super_hydra_mdio *hmdio; - struct mii_dev *bus = mdio_alloc(); - - if (!bus) { - printf("Failed to allocate Hydra MDIO bus\n"); - return -1; - } - - hmdio = malloc(sizeof(*hmdio)); - if (!hmdio) { - printf("Failed to allocate Hydra private data\n"); - free(bus); - return -1; - } - - bus->read = super_hydra_mdio_read; - bus->write = super_hydra_mdio_write; - bus->reset = super_hydra_mdio_reset; - strcpy(bus->name, fakebusname); - - hmdio->realbus = miiphy_get_dev_by_name(realbusname); - - if (!hmdio->realbus) { - printf("No bus with name %s\n", realbusname); - free(bus); - free(hmdio); - return -1; - } - - bus->priv = hmdio; - - return mdio_register(bus); -} - -/* - * Given the following ... - * - * 1) A pointer to an Fman Ethernet node (as identified by the 'compat' - * compatible string and 'addr' physical address) - * - * 2) An Fman port - * - * ... update the phy-handle property of the Ethernet node to point to the - * right PHY. This assumes that we already know the PHY for each port. That - * information is stored in mdio_mux[]. - * - * The offset of the Fman Ethernet node is also passed in for convenience, but - * it is not used. - * - * Note that what we call "Fman ports" (enum fm_port) is really an Fman MAC. - * Inside the Fman, "ports" are things that connect to MACs. We only call them - * ports in U-Boot because on previous Ethernet devices (e.g. Gianfar), MACs - * and ports are the same thing. - */ -void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr, - enum fm_port port, int offset) -{ - enum srds_prtcl device; - int lane, slot, phy; - char alias[32]; - - /* RGMII and XGMII are already mapped correctly in the DTS */ - - if (fm_info_get_enet_if(port) == PHY_INTERFACE_MODE_SGMII) { - device = serdes_device_from_fm_port(port); - lane = serdes_get_first_lane(device); - slot = lane_to_slot[lane]; - phy = fm_info_get_phy_address(port); - - sprintf(alias, "phy_sgmii_slot%u_%x", slot, phy); - fdt_set_phy_handle(fdt, compat, addr, alias); - } -} - -#define PIXIS_SW2_LANE_23_SEL 0x80 -#define PIXIS_SW2_LANE_45_SEL 0x40 -#define PIXIS_SW2_LANE_67_SEL_MASK 0x30 -#define PIXIS_SW2_LANE_67_SEL_5 0x00 -#define PIXIS_SW2_LANE_67_SEL_6 0x20 -#define PIXIS_SW2_LANE_67_SEL_7 0x10 -#define PIXIS_SW2_LANE_8_SEL 0x08 -#define PIXIS_SW2_LANE_1617_SEL 0x04 -#define PIXIS_SW11_LANE_9_SEL 0x04 -/* - * Initialize the lane_to_slot[] array. - * - * On the P4080DS "Expedition" board, the mapping of SERDES lanes to board - * slots is hard-coded. On the Hydra board, however, the mapping is controlled - * by board switch SW2, so the lane_to_slot[] array needs to be dynamically - * initialized. - */ -static void initialize_lane_to_slot(void) -{ - u8 sw2 = in_8(&PIXIS_SW(2)); - /* SW11 appears in the programming model as SW9 */ - u8 sw11 = in_8(&PIXIS_SW(9)); - - lane_to_slot[2] = (sw2 & PIXIS_SW2_LANE_23_SEL) ? 7 : 4; - lane_to_slot[3] = lane_to_slot[2]; - - lane_to_slot[4] = (sw2 & PIXIS_SW2_LANE_45_SEL) ? 7 : 6; - lane_to_slot[5] = lane_to_slot[4]; - - switch (sw2 & PIXIS_SW2_LANE_67_SEL_MASK) { - case PIXIS_SW2_LANE_67_SEL_5: - lane_to_slot[6] = 5; - break; - case PIXIS_SW2_LANE_67_SEL_6: - lane_to_slot[6] = 6; - break; - case PIXIS_SW2_LANE_67_SEL_7: - lane_to_slot[6] = 7; - break; - } - lane_to_slot[7] = lane_to_slot[6]; - - lane_to_slot[8] = (sw2 & PIXIS_SW2_LANE_8_SEL) ? 3 : 0; - lane_to_slot[9] = (sw11 & PIXIS_SW11_LANE_9_SEL) ? 0 : 3; - - lane_to_slot[16] = (sw2 & PIXIS_SW2_LANE_1617_SEL) ? 1 : 0; - lane_to_slot[17] = lane_to_slot[16]; -} - -#endif /* #ifdef CONFIG_FMAN_ENET */ - -/* - * Configure the status for the virtual MDIO nodes - * - * Rather than create the virtual MDIO nodes from scratch for each active - * virtual MDIO, we expect the DTS to have the nodes defined already, and we - * only enable the ones that are actually active. - * - * We assume that the DTS already hard-codes the status for all the - * virtual MDIO nodes to "disabled", so all we need to do is enable the - * active ones. - */ -void fdt_fixup_board_enet(void *fdt) -{ -#ifdef CONFIG_FMAN_ENET - enum fm_port i; - int lane, slot; - - for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { - int idx = i - FM1_DTSEC1; - - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx); - if (lane >= 0) { - char alias[32]; - - slot = lane_to_slot[lane]; - sprintf(alias, "hydra_sg_slot%u", slot); - fdt_status_okay_by_alias(fdt, alias); - debug("Enabled MDIO node %s (slot %i)\n", - alias, slot); - } - break; - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_TXID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_ID: - fdt_status_okay_by_alias(fdt, "hydra_rg"); - debug("Enabled MDIO node hydra_rg\n"); - break; - default: - break; - } - } - - lane = serdes_get_first_lane(XAUI_FM1); - if (lane >= 0) { - char alias[32]; - - slot = lane_to_slot[lane]; - sprintf(alias, "hydra_xg_slot%u", slot); - fdt_status_okay_by_alias(fdt, alias); - debug("Enabled MDIO node %s (slot %i)\n", alias, slot); - } - -#if CONFIG_SYS_NUM_FMAN == 2 - for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { - int idx = i - FM2_DTSEC1; - - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx); - if (lane >= 0) { - char alias[32]; - - slot = lane_to_slot[lane]; - sprintf(alias, "hydra_sg_slot%u", slot); - fdt_status_okay_by_alias(fdt, alias); - debug("Enabled MDIO node %s (slot %i)\n", - alias, slot); - } - break; - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_TXID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_ID: - fdt_status_okay_by_alias(fdt, "hydra_rg"); - debug("Enabled MDIO node hydra_rg\n"); - break; - default: - break; - } - } - - lane = serdes_get_first_lane(XAUI_FM2); - if (lane >= 0) { - char alias[32]; - - slot = lane_to_slot[lane]; - sprintf(alias, "hydra_xg_slot%u", slot); - fdt_status_okay_by_alias(fdt, alias); - debug("Enabled MDIO node %s (slot %i)\n", alias, slot); - } -#endif /* CONFIG_SYS_NUM_FMAN == 2 */ -#endif /* CONFIG_FMAN_ENET */ -} - -/* - * Mapping of SerDes Protocol to MDIO MUX value and PHY address. - * - * Fman 1: - * DTSEC1 | DTSEC2 | DTSEC3 | DTSEC4 - * Mux Phy | Mux Phy | Mux Phy | Mux Phy - * Value Addr | Value Addr | Value Addr | Value Addr - * 0x00 2 1c | 2 1d | 2 1e | 2 1f - * 0x01 | | 6 1c | - * 0x02 | | 3 1c | 3 1d - * 0x03 2 1c | 2 1d | 2 1e | 2 1f - * 0x04 2 1c | 2 1d | 2 1e | 2 1f - * 0x05 | | 3 1c | 3 1d - * 0x06 2 1c | 2 1d | 2 1e | 2 1f - * 0x07 | | 6 1c | - * 0x11 2 1c | 2 1d | 2 1e | 2 1f - * 0x2a 2 | | 2 1e | 2 1f - * 0x34 6 1c | 6 1d | 4 1e | 4 1f - * 0x35 | | 3 1c | 3 1d - * 0x36 6 1c | 6 1d | 4 1e | 4 1f - * | | | - * Fman 2: | | | - * DTSEC1 | DTSEC2 | DTSEC3 | DTSEC4 - * EMI1 | EMI1 | EMI1 | EMI1 - * Mux Phy | Mux Phy | Mux Phy | Mux Phy - * Value Addr | Value Addr | Value Addr | Value Addr - * 0x00 | | 6 1c | 6 1d - * 0x01 | | | - * 0x02 | | 6 1c | 6 1d - * 0x03 3 1c | 3 1d | 6 1c | 6 1d - * 0x04 3 1c | 3 1d | 6 1c | 6 1d - * 0x05 | | 6 1c | 6 1d - * 0x06 | | 6 1c | 6 1d - * 0x07 | | | - * 0x11 | | | - * 0x2a | | | - * 0x34 | | | - * 0x35 | | | - * 0x36 | | | - */ - -int board_eth_init(struct bd_info *bis) -{ -#ifdef CONFIG_FMAN_ENET - struct fsl_pq_mdio_info dtsec_mdio_info; - struct tgec_mdio_info tgec_mdio_info; - unsigned int i, slot; - int lane; - struct mii_dev *bus; - int qsgmii; - int phy_real_addr; - ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR); - int srds_prtcl = (in_be32(&gur->rcwsr[4]) & - FSL_CORENET_RCWSR4_SRDS_PRTCL) >> 26; - - printf("Initializing Fman\n"); - - initialize_lane_to_slot(); - - /* We want to use the PIXIS to configure MUX routing, not GPIOs. */ - setbits_8(&pixis->brdcfg2, BRDCFG2_REG_GPIO_SEL); - - memset(mdio_mux, 0, sizeof(mdio_mux)); - - dtsec_mdio_info.regs = - (struct tsec_mii_mng *)CONFIG_SYS_FM1_DTSEC1_MDIO_ADDR; - dtsec_mdio_info.name = DEFAULT_FM_MDIO_NAME; - - /* Register the real 1G MDIO bus */ - fsl_pq_mdio_init(bis, &dtsec_mdio_info); - - tgec_mdio_info.regs = - (struct tgec_mdio_controller *)CONFIG_SYS_FM1_TGEC_MDIO_ADDR; - tgec_mdio_info.name = DEFAULT_FM_TGEC_MDIO_NAME; - - /* Register the real 10G MDIO bus */ - fm_tgec_mdio_init(bis, &tgec_mdio_info); - - /* Register the three virtual MDIO front-ends */ - super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME, - "SUPER_HYDRA_RGMII_MDIO"); - super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME, - "SUPER_HYDRA_FM1_SGMII_MDIO"); - super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME, - "SUPER_HYDRA_FM2_SGMII_MDIO"); - super_hydra_mdio_init(DEFAULT_FM_MDIO_NAME, - "SUPER_HYDRA_FM3_SGMII_MDIO"); - super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, - "SUPER_HYDRA_FM1_TGEC_MDIO"); - super_hydra_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, - "SUPER_HYDRA_FM2_TGEC_MDIO"); - - /* - * Program the DTSEC PHY addresses assuming that they are all SGMII. - * For any DTSEC that's RGMII, we'll override its PHY address later. - * We assume that DTSEC5 is only used for RGMII. - */ - fm_info_set_phy_address(FM1_DTSEC1, CONFIG_SYS_FM1_DTSEC1_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC2, CONFIG_SYS_FM1_DTSEC2_PHY_ADDR); - fm_info_set_phy_address(FM1_10GEC1, CONFIG_SYS_FM2_10GEC1_PHY_ADDR); - -#if (CONFIG_SYS_NUM_FMAN == 2) - fm_info_set_phy_address(FM2_DTSEC1, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC2, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC3, CONFIG_SYS_FM2_DTSEC1_PHY_ADDR); - fm_info_set_phy_address(FM2_DTSEC4, CONFIG_SYS_FM2_DTSEC2_PHY_ADDR); - fm_info_set_phy_address(FM2_10GEC1, CONFIG_SYS_FM1_10GEC1_PHY_ADDR); -#endif - - switch (srds_prtcl) { - case 0: - case 3: - case 4: - case 6: - case 0x11: - case 0x2a: - case 0x34: - case 0x36: - fm_info_set_phy_address(FM1_DTSEC3, - CONFIG_SYS_FM1_DTSEC3_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC4, - CONFIG_SYS_FM1_DTSEC4_PHY_ADDR); - break; - case 1: - case 2: - case 5: - case 7: - case 0x35: - fm_info_set_phy_address(FM1_DTSEC3, - CONFIG_SYS_FM1_DTSEC1_PHY_ADDR); - fm_info_set_phy_address(FM1_DTSEC4, - CONFIG_SYS_FM1_DTSEC2_PHY_ADDR); - break; - default: - printf("Fman: Unsupport SerDes Protocol 0x%02x\n", srds_prtcl); - break; - } - - for (i = FM1_DTSEC1; i < FM1_DTSEC1 + CONFIG_SYS_NUM_FM1_DTSEC; i++) { - int idx = i - FM1_DTSEC1; - - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(SGMII_FM1_DTSEC1 + idx); - if (lane < 0) - break; - slot = lane_to_slot[lane]; - mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK; - debug("FM1@DTSEC%u expects SGMII in slot %u\n", - idx + 1, slot); - switch (slot) { - case 1: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 | - BRDCFG1_EMI1_EN; - break; - case 2: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 | - BRDCFG1_EMI1_EN; - break; - case 3: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT3 | - BRDCFG1_EMI1_EN; - break; - case 5: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 | - BRDCFG1_EMI1_EN; - break; - case 6: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 | - BRDCFG1_EMI1_EN; - break; - case 7: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 | - BRDCFG1_EMI1_EN; - break; - }; - - super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_SGMII_MDIO", - mdio_mux[i].mask, mdio_mux[i].val); - fm_info_set_mdio(i, - miiphy_get_dev_by_name("SUPER_HYDRA_FM1_SGMII_MDIO")); - break; - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_TXID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_ID: - /* - * FM1 DTSEC5 is routed via EC1 to the first on-board - * RGMII port. FM2 DTSEC5 is routed via EC2 to the - * second on-board RGMII port. The other DTSECs cannot - * be routed to RGMII. - */ - debug("FM1@DTSEC%u is RGMII at address %u\n", - idx + 1, 0); - fm_info_set_phy_address(i, 0); - mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK; - mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII | - BRDCFG1_EMI1_EN; - super_hydra_mdio_set_mux("SUPER_HYDRA_RGMII_MDIO", - mdio_mux[i].mask, mdio_mux[i].val); - fm_info_set_mdio(i, - miiphy_get_dev_by_name("SUPER_HYDRA_RGMII_MDIO")); - break; - case PHY_INTERFACE_MODE_NA: - fm_info_set_phy_address(i, 0); - break; - default: - printf("Fman1: DTSEC%u set to unknown interface %i\n", - idx + 1, fm_info_get_enet_if(i)); - fm_info_set_phy_address(i, 0); - break; - } - } - - bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM1_SGMII_MDIO"); - qsgmii = is_qsgmii_riser_card(bus, PHY_BASE_ADDR, PORT_NUM_FM1, REGNUM); - - if (qsgmii) { - for (i = FM1_DTSEC1; i < FM1_DTSEC1 + PORT_NUM_FM1; i++) { - if (fm_info_get_enet_if(i) == - PHY_INTERFACE_MODE_SGMII) { - phy_real_addr = PHY_BASE_ADDR + i - FM1_DTSEC1; - fm_info_set_phy_address(i, phy_real_addr); - } - } - switch (srds_prtcl) { - case 0x00: - case 0x03: - case 0x04: - case 0x06: - case 0x11: - case 0x2a: - case 0x34: - case 0x36: - fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR + 2); - fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 3); - break; - case 0x01: - case 0x02: - case 0x05: - case 0x07: - case 0x35: - fm_info_set_phy_address(FM1_DTSEC3, PHY_BASE_ADDR + 0); - fm_info_set_phy_address(FM1_DTSEC4, PHY_BASE_ADDR + 1); - break; - default: - break; - } - } - - /* - * For 10G, we only support one XAUI card per Fman. If present, then we - * force its routing and never touch those bits again, which removes the - * need for Linux to do any muxing. This works because of the way - * BRDCFG1 is defined, but it's a bit hackish. - * - * The PHY address for the XAUI card depends on which slot it's in. The - * macros we use imply that the PHY address is based on which FM, but - * that's not true. On the P4080DS, FM1 could only use XAUI in slot 5, - * and FM2 could only use a XAUI in slot 4. On the Hydra board, we - * check the actual slot and just use the macros as-is, even though - * the P3041 and P5020 only have one Fman. - */ - lane = serdes_get_first_lane(XAUI_FM1); - if (lane >= 0) { - debug("FM1@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]); - mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK; - mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT2; - super_hydra_mdio_set_mux("SUPER_HYDRA_FM1_TGEC_MDIO", - mdio_mux[i].mask, mdio_mux[i].val); - } - - fm_info_set_mdio(FM1_10GEC1, - miiphy_get_dev_by_name("SUPER_HYDRA_FM1_TGEC_MDIO")); - -#if (CONFIG_SYS_NUM_FMAN == 2) - for (i = FM2_DTSEC1; i < FM2_DTSEC1 + CONFIG_SYS_NUM_FM2_DTSEC; i++) { - int idx = i - FM2_DTSEC1; - - switch (fm_info_get_enet_if(i)) { - case PHY_INTERFACE_MODE_SGMII: - lane = serdes_get_first_lane(SGMII_FM2_DTSEC1 + idx); - if (lane < 0) - break; - slot = lane_to_slot[lane]; - mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK; - debug("FM2@DTSEC%u expects SGMII in slot %u\n", - idx + 1, slot); - switch (slot) { - case 1: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT1 | - BRDCFG1_EMI1_EN; - break; - case 2: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT2 | - BRDCFG1_EMI1_EN; - break; - case 3: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT3 | - BRDCFG1_EMI1_EN; - break; - case 5: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT5 | - BRDCFG1_EMI1_EN; - break; - case 6: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT6 | - BRDCFG1_EMI1_EN; - break; - case 7: - mdio_mux[i].val = BRDCFG1_EMI1_SEL_SLOT7 | - BRDCFG1_EMI1_EN; - break; - }; - - if (i == FM2_DTSEC1 || i == FM2_DTSEC2) { - super_hydra_mdio_set_mux( - "SUPER_HYDRA_FM3_SGMII_MDIO", - mdio_mux[i].mask, - mdio_mux[i].val); - fm_info_set_mdio(i, miiphy_get_dev_by_name( - "SUPER_HYDRA_FM3_SGMII_MDIO")); - } else { - super_hydra_mdio_set_mux( - "SUPER_HYDRA_FM2_SGMII_MDIO", - mdio_mux[i].mask, - mdio_mux[i].val); - fm_info_set_mdio(i, miiphy_get_dev_by_name( - "SUPER_HYDRA_FM2_SGMII_MDIO")); - } - - break; - case PHY_INTERFACE_MODE_RGMII: - case PHY_INTERFACE_MODE_RGMII_TXID: - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_ID: - /* - * FM1 DTSEC5 is routed via EC1 to the first on-board - * RGMII port. FM2 DTSEC5 is routed via EC2 to the - * second on-board RGMII port. The other DTSECs cannot - * be routed to RGMII. - */ - debug("FM2@DTSEC%u is RGMII at address %u\n", - idx + 1, 1); - fm_info_set_phy_address(i, 1); - mdio_mux[i].mask = BRDCFG1_EMI1_SEL_MASK; - mdio_mux[i].val = BRDCFG1_EMI1_SEL_RGMII | - BRDCFG1_EMI1_EN; - super_hydra_mdio_set_mux("SUPER_HYDRA_RGMII_MDIO", - mdio_mux[i].mask, mdio_mux[i].val); - fm_info_set_mdio(i, - miiphy_get_dev_by_name("SUPER_HYDRA_RGMII_MDIO")); - break; - case PHY_INTERFACE_MODE_NA: - fm_info_set_phy_address(i, 0); - break; - default: - printf("Fman2: DTSEC%u set to unknown interface %i\n", - idx + 1, fm_info_get_enet_if(i)); - fm_info_set_phy_address(i, 0); - break; - } - } - - bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM2_SGMII_MDIO"); - set_sgmii_phy(bus, FM2_DTSEC3, PORT_NUM_FM2, PHY_BASE_ADDR); - bus = miiphy_get_dev_by_name("SUPER_HYDRA_FM3_SGMII_MDIO"); - set_sgmii_phy(bus, FM2_DTSEC1, PORT_NUM_FM2, PHY_BASE_ADDR); - - /* - * For 10G, we only support one XAUI card per Fman. If present, then we - * force its routing and never touch those bits again, which removes the - * need for Linux to do any muxing. This works because of the way - * BRDCFG1 is defined, but it's a bit hackish. - * - * The PHY address for the XAUI card depends on which slot it's in. The - * macros we use imply that the PHY address is based on which FM, but - * that's not true. On the P4080DS, FM1 could only use XAUI in slot 5, - * and FM2 could only use a XAUI in slot 4. On the Hydra board, we - * check the actual slot and just use the macros as-is, even though - * the P3041 and P5020 only have one Fman. - */ - lane = serdes_get_first_lane(XAUI_FM2); - if (lane >= 0) { - debug("FM2@TGEC1 expects XAUI in slot %u\n", lane_to_slot[lane]); - mdio_mux[i].mask = BRDCFG1_EMI2_SEL_MASK; - mdio_mux[i].val = BRDCFG1_EMI2_SEL_SLOT1; - super_hydra_mdio_set_mux("SUPER_HYDRA_FM2_TGEC_MDIO", - mdio_mux[i].mask, mdio_mux[i].val); - } - - fm_info_set_mdio(FM2_10GEC1, - miiphy_get_dev_by_name("SUPER_HYDRA_FM2_TGEC_MDIO")); - -#endif - - cpu_eth_init(bis); -#endif - - return pci_eth_init(bis); -} diff --git a/board/freescale/corenet_ds/p3041ds_ddr.c b/board/freescale/corenet_ds/p3041ds_ddr.c deleted file mode 100644 index c62d85ccc0..0000000000 --- a/board/freescale/corenet_ds/p3041ds_ddr.c +++ /dev/null @@ -1,11 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2009-2010 Freescale Semiconductor, Inc. - */ - -#include -#include - -fixed_ddr_parm_t fixed_ddr_parm_0[] = { - {0, 0, NULL} -}; diff --git a/board/freescale/corenet_ds/p4080ds_ddr.c b/board/freescale/corenet_ds/p4080ds_ddr.c deleted file mode 100644 index 9839eaceaf..0000000000 --- a/board/freescale/corenet_ds/p4080ds_ddr.c +++ /dev/null @@ -1,346 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - */ - -#include -#include - -#define CONFIG_SYS_DDR_TIMING_3_1200 0x01030000 -#define CONFIG_SYS_DDR_TIMING_0_1200 0xCC550104 -#define CONFIG_SYS_DDR_TIMING_1_1200 0x868FAA45 -#define CONFIG_SYS_DDR_TIMING_2_1200 0x0FB8A912 -#define CONFIG_SYS_DDR_MODE_1_1200 0x00441A40 -#define CONFIG_SYS_DDR_MODE_2_1200 0x00100000 -#define CONFIG_SYS_DDR_INTERVAL_1200 0x12480100 -#define CONFIG_SYS_DDR_CLK_CTRL_1200 0x02800000 - -#define CONFIG_SYS_DDR_TIMING_3_1000 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0_1000 0xCC440104 -#define CONFIG_SYS_DDR_TIMING_1_1000 0x727DF944 -#define CONFIG_SYS_DDR_TIMING_2_1000 0x0FB088CF -#define CONFIG_SYS_DDR_MODE_1_1000 0x00441830 -#define CONFIG_SYS_DDR_MODE_2_1000 0x00080000 -#define CONFIG_SYS_DDR_INTERVAL_1000 0x0F3C0100 -#define CONFIG_SYS_DDR_CLK_CTRL_1000 0x02800000 - -#define CONFIG_SYS_DDR_TIMING_3_900 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0_900 0xCC440104 -#define CONFIG_SYS_DDR_TIMING_1_900 0x616ba844 -#define CONFIG_SYS_DDR_TIMING_2_900 0x0fb088ce -#define CONFIG_SYS_DDR_MODE_1_900 0x00441620 -#define CONFIG_SYS_DDR_MODE_2_900 0x00080000 -#define CONFIG_SYS_DDR_INTERVAL_900 0x0db60100 -#define CONFIG_SYS_DDR_CLK_CTRL_900 0x02800000 - -#define CONFIG_SYS_DDR_TIMING_3_800 0x00020000 -#define CONFIG_SYS_DDR_TIMING_0_800 0xcc330104 -#define CONFIG_SYS_DDR_TIMING_1_800 0x6f6b4744 -#define CONFIG_SYS_DDR_TIMING_2_800 0x0fa888cc -#define CONFIG_SYS_DDR_MODE_1_800 0x00441420 -#define CONFIG_SYS_DDR_MODE_2_800 0x00000000 -#define CONFIG_SYS_DDR_INTERVAL_800 0x0c300100 -#define CONFIG_SYS_DDR_CLK_CTRL_800 0x02800000 - -#define CONFIG_SYS_DDR_CS0_BNDS 0x000000FF -#define CONFIG_SYS_DDR_CS1_BNDS 0x00000000 -#define CONFIG_SYS_DDR_CS2_BNDS 0x000000FF -#define CONFIG_SYS_DDR_CS3_BNDS 0x000000FF -#define CONFIG_SYS_DDR2_CS0_BNDS 0x000000FF -#define CONFIG_SYS_DDR2_CS1_BNDS 0x00000000 -#define CONFIG_SYS_DDR2_CS2_BNDS 0x000000FF -#define CONFIG_SYS_DDR2_CS3_BNDS 0x000000FF -#define CONFIG_SYS_DDR_CS0_CONFIG 0xA0044202 -#define CONFIG_SYS_DDR_CS0_CONFIG_2 0x00000000 -#define CONFIG_SYS_DDR_CS1_CONFIG 0x80004202 -#define CONFIG_SYS_DDR_CS2_CONFIG 0x00000000 -#define CONFIG_SYS_DDR_CS3_CONFIG 0x00000000 -#define CONFIG_SYS_DDR2_CS0_CONFIG 0x80044202 -#define CONFIG_SYS_DDR2_CS1_CONFIG 0x80004202 -#define CONFIG_SYS_DDR2_CS2_CONFIG 0x00000000 -#define CONFIG_SYS_DDR2_CS3_CONFIG 0x00000000 -#define CONFIG_SYS_DDR_INIT_ADDR 0x00000000 -#define CONFIG_SYS_DDR_INIT_EXT_ADDR 0x00000000 -#define CONFIG_SYS_DDR_CS1_CONFIG 0x80004202 -#define CONFIG_SYS_DDR_TIMING_4 0x00000001 -#define CONFIG_SYS_DDR_TIMING_5 0x02401400 -#define CONFIG_SYS_DDR_MODE_CONTROL 0x00000000 -#define CONFIG_SYS_DDR_ZQ_CNTL 0x89080600 -#define CONFIG_SYS_DDR_WRLVL_CNTL 0x8675F607 -#define CONFIG_SYS_DDR_SDRAM_CFG 0xE7044000 -#define CONFIG_SYS_DDR_SDRAM_CFG2 0x24401031 -#define CONFIG_SYS_DDR_RCW_1 0x00000000 -#define CONFIG_SYS_DDR_RCW_2 0x00000000 -#define CONFIG_MEM_INIT_VALUE 0xdeadbeef - -fsl_ddr_cfg_regs_t ddr_cfg_regs_800 = { - .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, - .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS, - .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS, - .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS, - .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG, - .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG, - .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800, - .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fsl_ddr_cfg_regs_t ddr_cfg_regs_800_2nd = { - .cs[0].bnds = CONFIG_SYS_DDR2_CS0_BNDS, - .cs[1].bnds = CONFIG_SYS_DDR2_CS1_BNDS, - .cs[2].bnds = CONFIG_SYS_DDR2_CS2_BNDS, - .cs[3].bnds = CONFIG_SYS_DDR2_CS3_BNDS, - .cs[0].config = CONFIG_SYS_DDR2_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .cs[1].config = CONFIG_SYS_DDR2_CS1_CONFIG, - .cs[2].config = CONFIG_SYS_DDR2_CS2_CONFIG, - .cs[3].config = CONFIG_SYS_DDR2_CS3_CONFIG, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_800, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_800, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_800, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_800, - .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_800, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_800, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_800, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_800, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fsl_ddr_cfg_regs_t ddr_cfg_regs_900 = { - .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, - .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS, - .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS, - .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS, - .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG, - .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG, - .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_900, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_900, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_900, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_900, - .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_900, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_900, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_900, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_900, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fsl_ddr_cfg_regs_t ddr_cfg_regs_900_2nd = { - .cs[0].bnds = CONFIG_SYS_DDR2_CS0_BNDS, - .cs[1].bnds = CONFIG_SYS_DDR2_CS1_BNDS, - .cs[2].bnds = CONFIG_SYS_DDR2_CS2_BNDS, - .cs[3].bnds = CONFIG_SYS_DDR2_CS3_BNDS, - .cs[0].config = CONFIG_SYS_DDR2_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .cs[1].config = CONFIG_SYS_DDR2_CS1_CONFIG, - .cs[2].config = CONFIG_SYS_DDR2_CS2_CONFIG, - .cs[3].config = CONFIG_SYS_DDR2_CS3_CONFIG, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_900, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_900, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_900, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_900, - .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_900, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_900, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_900, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_900, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fsl_ddr_cfg_regs_t ddr_cfg_regs_1000 = { - .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, - .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS, - .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS, - .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS, - .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG, - .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG, - .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1000, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1000, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1000, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1000, - .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1000, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1000, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1000, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1000, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fsl_ddr_cfg_regs_t ddr_cfg_regs_1000_2nd = { - .cs[0].bnds = CONFIG_SYS_DDR2_CS0_BNDS, - .cs[1].bnds = CONFIG_SYS_DDR2_CS1_BNDS, - .cs[2].bnds = CONFIG_SYS_DDR2_CS2_BNDS, - .cs[3].bnds = CONFIG_SYS_DDR2_CS3_BNDS, - .cs[0].config = CONFIG_SYS_DDR2_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .cs[1].config = CONFIG_SYS_DDR2_CS1_CONFIG, - .cs[2].config = CONFIG_SYS_DDR2_CS2_CONFIG, - .cs[3].config = CONFIG_SYS_DDR2_CS3_CONFIG, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1000, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1000, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1000, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1000, - .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1000, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1000, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1000, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1000, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fsl_ddr_cfg_regs_t ddr_cfg_regs_1200 = { - .cs[0].bnds = CONFIG_SYS_DDR_CS0_BNDS, - .cs[1].bnds = CONFIG_SYS_DDR_CS1_BNDS, - .cs[2].bnds = CONFIG_SYS_DDR_CS2_BNDS, - .cs[3].bnds = CONFIG_SYS_DDR_CS3_BNDS, - .cs[0].config = CONFIG_SYS_DDR_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .cs[1].config = CONFIG_SYS_DDR_CS1_CONFIG, - .cs[2].config = CONFIG_SYS_DDR_CS2_CONFIG, - .cs[3].config = CONFIG_SYS_DDR_CS3_CONFIG, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1200, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1200, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1200, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1200, - .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1200, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1200, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1200, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1200, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fsl_ddr_cfg_regs_t ddr_cfg_regs_1200_2nd = { - .cs[0].bnds = CONFIG_SYS_DDR2_CS0_BNDS, - .cs[1].bnds = CONFIG_SYS_DDR2_CS1_BNDS, - .cs[2].bnds = CONFIG_SYS_DDR2_CS2_BNDS, - .cs[3].bnds = CONFIG_SYS_DDR2_CS3_BNDS, - .cs[0].config = CONFIG_SYS_DDR2_CS0_CONFIG, - .cs[0].config_2 = CONFIG_SYS_DDR_CS0_CONFIG_2, - .cs[1].config = CONFIG_SYS_DDR2_CS1_CONFIG, - .cs[2].config = CONFIG_SYS_DDR2_CS2_CONFIG, - .cs[3].config = CONFIG_SYS_DDR2_CS3_CONFIG, - .timing_cfg_3 = CONFIG_SYS_DDR_TIMING_3_1200, - .timing_cfg_0 = CONFIG_SYS_DDR_TIMING_0_1200, - .timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1_1200, - .timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2_1200, - .ddr_sdram_cfg = CONFIG_SYS_DDR_SDRAM_CFG, - .ddr_sdram_cfg_2 = CONFIG_SYS_DDR_SDRAM_CFG2, - .ddr_sdram_mode = CONFIG_SYS_DDR_MODE_1_1200, - .ddr_sdram_mode_2 = CONFIG_SYS_DDR_MODE_2_1200, - .ddr_sdram_md_cntl = CONFIG_SYS_DDR_MODE_CONTROL, - .ddr_sdram_interval = CONFIG_SYS_DDR_INTERVAL_1200, - .ddr_data_init = CONFIG_MEM_INIT_VALUE, - .ddr_sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CTRL_1200, - .ddr_init_addr = CONFIG_SYS_DDR_INIT_ADDR, - .ddr_init_ext_addr = CONFIG_SYS_DDR_INIT_EXT_ADDR, - .timing_cfg_4 = CONFIG_SYS_DDR_TIMING_4, - .timing_cfg_5 = CONFIG_SYS_DDR_TIMING_5, - .ddr_zq_cntl = CONFIG_SYS_DDR_ZQ_CNTL, - .ddr_wrlvl_cntl = CONFIG_SYS_DDR_WRLVL_CNTL, - .ddr_sdram_rcw_1 = CONFIG_SYS_DDR_RCW_1, - .ddr_sdram_rcw_2 = CONFIG_SYS_DDR_RCW_2 -}; - -fixed_ddr_parm_t fixed_ddr_parm_0[] = { - {750, 850, &ddr_cfg_regs_800}, - {850, 950, &ddr_cfg_regs_900}, - {950, 1050, &ddr_cfg_regs_1000}, - {1050, 1250, &ddr_cfg_regs_1200}, - {0, 0, NULL} -}; - -fixed_ddr_parm_t fixed_ddr_parm_1[] = { - {750, 850, &ddr_cfg_regs_800_2nd}, - {850, 950, &ddr_cfg_regs_900_2nd}, - {950, 1050, &ddr_cfg_regs_1000_2nd}, - {1050, 1250, &ddr_cfg_regs_1200_2nd}, - {0, 0, NULL} -}; diff --git a/board/freescale/corenet_ds/p5040ds_ddr.c b/board/freescale/corenet_ds/p5040ds_ddr.c deleted file mode 100644 index 112733be78..0000000000 --- a/board/freescale/corenet_ds/p5040ds_ddr.c +++ /dev/null @@ -1,15 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright 2009-2010 Freescale Semiconductor, Inc. - */ - -#include -#include - -fixed_ddr_parm_t fixed_ddr_parm_0[] = { - {0, 0, NULL} -}; - -fixed_ddr_parm_t fixed_ddr_parm_1[] = { - {0, 0, NULL} -}; diff --git a/board/freescale/corenet_ds/rcw_p3041ds.cfg b/board/freescale/corenet_ds/rcw_p3041ds.cfg deleted file mode 100644 index 8813156219..0000000000 --- a/board/freescale/corenet_ds/rcw_p3041ds.cfg +++ /dev/null @@ -1,11 +0,0 @@ -# -# Default RCW for P3041DS. -# - -#PBL preamble and RCW header -aa55aa55 010e0100 -#64 bytes RCW data -12600000 00000000 241C0000 00000000 -D8984A01 03002000 58000000 41000000 -00000000 00000000 00000000 10070000 -00000000 00000000 00000000 00000000 diff --git a/board/freescale/corenet_ds/rcw_p4080ds.cfg b/board/freescale/corenet_ds/rcw_p4080ds.cfg deleted file mode 100644 index 6a26339599..0000000000 --- a/board/freescale/corenet_ds/rcw_p4080ds.cfg +++ /dev/null @@ -1,11 +0,0 @@ -# -# Default RCW for P4080DS. -# - -#PBL preamble and RCW header -aa55aa55 010e0100 -#64 bytes RCW data -105a0000 00000000 1e1e181e 0000cccc -58400000 3c3c2000 58000000 e1000000 -00000000 00000000 00000000 008b6000 -00000000 00000000 00000000 00000000 diff --git a/board/freescale/corenet_ds/rcw_p5040ds.cfg b/board/freescale/corenet_ds/rcw_p5040ds.cfg deleted file mode 100644 index 82fa7417d9..0000000000 --- a/board/freescale/corenet_ds/rcw_p5040ds.cfg +++ /dev/null @@ -1,11 +0,0 @@ -# -# Default RCW for P5040DS. -# - -#PBL preamble and RCW header -aa55aa55 010e0100 -#64 bytes RCW data -0c580000 00000000 22121200 00000000 -089c4400 00283000 58000000 61000000 -00000000 00000000 00000000 10070000 -00000000 00000000 00000000 00000000 diff --git a/board/freescale/corenet_ds/pbi.cfg b/board/freescale/p2041rdb/pbi.cfg similarity index 100% rename from board/freescale/corenet_ds/pbi.cfg rename to board/freescale/p2041rdb/pbi.cfg diff --git a/board/freescale/corenet_ds/rcw_p2041rdb.cfg b/board/freescale/p2041rdb/rcw_p2041rdb.cfg similarity index 100% rename from board/freescale/corenet_ds/rcw_p2041rdb.cfg rename to board/freescale/p2041rdb/rcw_p2041rdb.cfg diff --git a/configs/P2041RDB_NAND_defconfig b/configs/P2041RDB_NAND_defconfig index 0e8c2aa00b..cc62719a89 100644 --- a/configs/P2041RDB_NAND_defconfig +++ b/configs/P2041RDB_NAND_defconfig @@ -21,8 +21,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p2041rdb.cfg" +CONFIG_SYS_FSL_PBL_PBI="board/freescale/p2041rdb/pbi.cfg" +CONFIG_SYS_FSL_PBL_RCW="board/freescale/p2041rdb/rcw_p2041rdb.cfg" CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" diff --git a/configs/P2041RDB_SDCARD_defconfig b/configs/P2041RDB_SDCARD_defconfig index 5b9f5a4469..b0e4bb8963 100644 --- a/configs/P2041RDB_SDCARD_defconfig +++ b/configs/P2041RDB_SDCARD_defconfig @@ -21,8 +21,8 @@ CONFIG_OF_BOARD_SETUP=y CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p2041rdb.cfg" +CONFIG_SYS_FSL_PBL_PBI="board/freescale/p2041rdb/pbi.cfg" +CONFIG_SYS_FSL_PBL_RCW="board/freescale/p2041rdb/rcw_p2041rdb.cfg" CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" diff --git a/configs/P2041RDB_SPIFLASH_defconfig b/configs/P2041RDB_SPIFLASH_defconfig index 0a061610c0..517c7d25ed 100644 --- a/configs/P2041RDB_SPIFLASH_defconfig +++ b/configs/P2041RDB_SPIFLASH_defconfig @@ -23,8 +23,8 @@ CONFIG_OF_STDOUT_VIA_ALIAS=y CONFIG_DYNAMIC_SYS_CLK_FREQ=y CONFIG_RAMBOOT_PBL=y CONFIG_SPIFLASH=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p2041rdb.cfg" +CONFIG_SYS_FSL_PBL_PBI="board/freescale/p2041rdb/pbi.cfg" +CONFIG_SYS_FSL_PBL_RCW="board/freescale/p2041rdb/rcw_p2041rdb.cfg" CONFIG_BOOTDELAY=10 CONFIG_USE_BOOTCOMMAND=y CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" diff --git a/configs/P3041DS_NAND_defconfig b/configs/P3041DS_NAND_defconfig deleted file mode 100644 index 7afb7a45ec..0000000000 --- a/configs/P3041DS_NAND_defconfig +++ /dev/null @@ -1,113 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFFF40000 -CONFIG_SYS_MALLOC_LEN=0x100000 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_OFFSET=0xE0000 -CONFIG_DEFAULT_DEVICE_TREE="p3041ds" -CONFIG_MPC85xx=y -CONFIG_TARGET_P3041DS=y -CONFIG_MPC85XX_HAVE_RESET_VECTOR=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_PCIE4=y -CONFIG_SYS_FSL_NUM_CC_PLLS=2 -CONFIG_MP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p3041ds.cfg" -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" -CONFIG_ARCH_MISC_INIT=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_ID_EEPROM=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PBSIZE=276 -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC1" -CONFIG_DM=y -CONFIG_FSL_SATA_V2=y -CONFIG_SYS_SATA_MAX_DEVICE=2 -CONFIG_FSL_CAAM=y -CONFIG_SYS_SPD_BUS_NUM=1 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_BR0_PRELIM_BOOL=y -CONFIG_SYS_BR0_PRELIM=0xFFA00C21 -CONFIG_SYS_OR0_PRELIM=0xFFFC0796 -CONFIG_SYS_BR1_PRELIM_BOOL=y -CONFIG_SYS_BR1_PRELIM=0xE0001001 -CONFIG_SYS_OR1_PRELIM=0xF8000FF7 -CONFIG_SYS_BR2_PRELIM_BOOL=y -CONFIG_SYS_BR2_PRELIM=0xE8001001 -CONFIG_SYS_OR2_PRELIM=0xF8000F85 -CONFIG_SYS_BR3_PRELIM_BOOL=y -CONFIG_SYS_BR3_PRELIM=0xFFDF0801 -CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_ELBC=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x100000 -CONFIG_MII=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_NAND=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P3041DS_SDCARD_defconfig b/configs/P3041DS_SDCARD_defconfig deleted file mode 100644 index 35e2e4f161..0000000000 --- a/configs/P3041DS_SDCARD_defconfig +++ /dev/null @@ -1,108 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFFF40000 -CONFIG_SYS_MALLOC_LEN=0x100000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0xCF400 -CONFIG_DEFAULT_DEVICE_TREE="p3041ds" -CONFIG_MPC85xx=y -CONFIG_TARGET_P3041DS=y -CONFIG_MPC85XX_HAVE_RESET_VECTOR=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_PCIE4=y -CONFIG_SYS_FSL_NUM_CC_PLLS=2 -CONFIG_MP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p3041ds.cfg" -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" -CONFIG_ARCH_MISC_INIT=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_ID_EEPROM=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PBSIZE=276 -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC1" -CONFIG_DM=y -CONFIG_FSL_SATA_V2=y -CONFIG_SYS_SATA_MAX_DEVICE=2 -CONFIG_FSL_CAAM=y -CONFIG_SYS_SPD_BUS_NUM=1 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_BR0_PRELIM_BOOL=y -CONFIG_SYS_BR0_PRELIM=0xE8001001 -CONFIG_SYS_OR0_PRELIM=0xF8000F85 -CONFIG_SYS_BR1_PRELIM_BOOL=y -CONFIG_SYS_BR1_PRELIM=0xE0001001 -CONFIG_SYS_OR1_PRELIM=0xF8000FF7 -CONFIG_SYS_BR3_PRELIM_BOOL=y -CONFIG_SYS_BR3_PRELIM=0xFFDF0801 -CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0xD2000 -CONFIG_MII=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_MMC=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P3041DS_SPIFLASH_defconfig b/configs/P3041DS_SPIFLASH_defconfig deleted file mode 100644 index 2e50dc44f7..0000000000 --- a/configs/P3041DS_SPIFLASH_defconfig +++ /dev/null @@ -1,110 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFFF40000 -CONFIG_SYS_MALLOC_LEN=0x100000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="p3041ds" -CONFIG_MPC85xx=y -CONFIG_TARGET_P3041DS=y -CONFIG_MPC85XX_HAVE_RESET_VECTOR=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_PCIE4=y -CONFIG_SYS_FSL_NUM_CC_PLLS=2 -CONFIG_MP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SPIFLASH=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p3041ds.cfg" -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" -CONFIG_ARCH_MISC_INIT=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_ID_EEPROM=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PBSIZE=276 -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC1" -CONFIG_DM=y -CONFIG_FSL_SATA_V2=y -CONFIG_SYS_SATA_MAX_DEVICE=2 -CONFIG_FSL_CAAM=y -CONFIG_SYS_SPD_BUS_NUM=1 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_BR0_PRELIM_BOOL=y -CONFIG_SYS_BR0_PRELIM=0xE8001001 -CONFIG_SYS_OR0_PRELIM=0xF8000F85 -CONFIG_SYS_BR1_PRELIM_BOOL=y -CONFIG_SYS_BR1_PRELIM=0xE0001001 -CONFIG_SYS_OR1_PRELIM=0xF8000FF7 -CONFIG_SYS_BR3_PRELIM_BOOL=y -CONFIG_SYS_BR3_PRELIM=0xFFDF0801 -CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x110000 -CONFIG_MII=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P3041DS_defconfig b/configs/P3041DS_defconfig deleted file mode 100644 index b494dfa822..0000000000 --- a/configs/P3041DS_defconfig +++ /dev/null @@ -1,105 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xEFF40000 -CONFIG_SYS_MALLOC_LEN=0x100000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_DEFAULT_DEVICE_TREE="p3041ds" -CONFIG_ENV_ADDR=0xEFF20000 -CONFIG_MPC85xx=y -CONFIG_TARGET_P3041DS=y -CONFIG_MPC85XX_HAVE_RESET_VECTOR=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_PCIE4=y -CONFIG_SYS_FSL_NUM_CC_PLLS=2 -CONFIG_MP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" -CONFIG_ARCH_MISC_INIT=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_ID_EEPROM=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PBSIZE=276 -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC1" -CONFIG_DM=y -CONFIG_FSL_SATA_V2=y -CONFIG_SYS_SATA_MAX_DEVICE=2 -CONFIG_FSL_CAAM=y -CONFIG_SYS_SPD_BUS_NUM=1 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_BR0_PRELIM_BOOL=y -CONFIG_SYS_BR0_PRELIM=0xE8001001 -CONFIG_SYS_OR0_PRELIM=0xF8000F85 -CONFIG_SYS_BR1_PRELIM_BOOL=y -CONFIG_SYS_BR1_PRELIM=0xE0001001 -CONFIG_SYS_OR1_PRELIM=0xF8000FF7 -CONFIG_SYS_BR3_PRELIM_BOOL=y -CONFIG_SYS_BR3_PRELIM=0xFFDF0801 -CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0xEFF00000 -CONFIG_MII=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P4080DS_SDCARD_defconfig b/configs/P4080DS_SDCARD_defconfig deleted file mode 100644 index b872878888..0000000000 --- a/configs/P4080DS_SDCARD_defconfig +++ /dev/null @@ -1,105 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFFF40000 -CONFIG_SYS_MALLOC_LEN=0x100000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0xCF400 -CONFIG_DEFAULT_DEVICE_TREE="p4080ds" -CONFIG_MPC85xx=y -CONFIG_TARGET_P4080DS=y -CONFIG_MPC85XX_HAVE_RESET_VECTOR=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_SYS_FSL_NUM_CC_PLLS=4 -CONFIG_MP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p4080ds.cfg" -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" -CONFIG_ARCH_MISC_INIT=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_ID_EEPROM=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PBSIZE=276 -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC1" -CONFIG_DM=y -CONFIG_LBA48=y -CONFIG_FSL_CAAM=y -CONFIG_SYS_SPD_BUS_NUM=1 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_BR0_PRELIM_BOOL=y -CONFIG_SYS_BR0_PRELIM=0xE8001001 -CONFIG_SYS_OR0_PRELIM=0xF8000F85 -CONFIG_SYS_BR1_PRELIM_BOOL=y -CONFIG_SYS_BR1_PRELIM=0xE0001001 -CONFIG_SYS_OR1_PRELIM=0xF8000FF7 -CONFIG_SYS_BR3_PRELIM_BOOL=y -CONFIG_SYS_BR3_PRELIM=0xFFDF0801 -CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0xD2000 -CONFIG_MII=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_MMC=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P4080DS_SPIFLASH_defconfig b/configs/P4080DS_SPIFLASH_defconfig deleted file mode 100644 index cdd956b9f9..0000000000 --- a/configs/P4080DS_SPIFLASH_defconfig +++ /dev/null @@ -1,107 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFFF40000 -CONFIG_SYS_MALLOC_LEN=0x100000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="p4080ds" -CONFIG_MPC85xx=y -CONFIG_TARGET_P4080DS=y -CONFIG_MPC85XX_HAVE_RESET_VECTOR=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_SYS_FSL_NUM_CC_PLLS=4 -CONFIG_MP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SPIFLASH=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p4080ds.cfg" -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" -CONFIG_ARCH_MISC_INIT=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_ID_EEPROM=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PBSIZE=276 -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC1" -CONFIG_DM=y -CONFIG_LBA48=y -CONFIG_FSL_CAAM=y -CONFIG_SYS_SPD_BUS_NUM=1 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_BR0_PRELIM_BOOL=y -CONFIG_SYS_BR0_PRELIM=0xE8001001 -CONFIG_SYS_OR0_PRELIM=0xF8000F85 -CONFIG_SYS_BR1_PRELIM_BOOL=y -CONFIG_SYS_BR1_PRELIM=0xE0001001 -CONFIG_SYS_OR1_PRELIM=0xF8000FF7 -CONFIG_SYS_BR3_PRELIM_BOOL=y -CONFIG_SYS_BR3_PRELIM=0xFFDF0801 -CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x110000 -CONFIG_MII=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P4080DS_defconfig b/configs/P4080DS_defconfig deleted file mode 100644 index 6b22602e67..0000000000 --- a/configs/P4080DS_defconfig +++ /dev/null @@ -1,102 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xEFF40000 -CONFIG_SYS_MALLOC_LEN=0x100000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_DEFAULT_DEVICE_TREE="p4080ds" -CONFIG_ENV_ADDR=0xEFF20000 -CONFIG_MPC85xx=y -CONFIG_TARGET_P4080DS=y -CONFIG_MPC85XX_HAVE_RESET_VECTOR=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_SYS_FSL_NUM_CC_PLLS=4 -CONFIG_MP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" -CONFIG_ARCH_MISC_INIT=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_ID_EEPROM=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PBSIZE=276 -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC1" -CONFIG_DM=y -CONFIG_LBA48=y -CONFIG_FSL_CAAM=y -CONFIG_SYS_SPD_BUS_NUM=1 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_BR0_PRELIM_BOOL=y -CONFIG_SYS_BR0_PRELIM=0xE8001001 -CONFIG_SYS_OR0_PRELIM=0xF8000F85 -CONFIG_SYS_BR1_PRELIM_BOOL=y -CONFIG_SYS_BR1_PRELIM=0xE0001001 -CONFIG_SYS_OR1_PRELIM=0xF8000FF7 -CONFIG_SYS_BR3_PRELIM_BOOL=y -CONFIG_SYS_BR3_PRELIM=0xFFDF0801 -CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0xEFF00000 -CONFIG_MII=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P5040DS_NAND_defconfig b/configs/P5040DS_NAND_defconfig deleted file mode 100644 index b36f525cc1..0000000000 --- a/configs/P5040DS_NAND_defconfig +++ /dev/null @@ -1,113 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFFF40000 -CONFIG_SYS_MALLOC_LEN=0x100000 -CONFIG_ENV_SIZE=0x20000 -CONFIG_ENV_OFFSET=0xE0000 -CONFIG_DEFAULT_DEVICE_TREE="p5040ds" -CONFIG_MPC85xx=y -CONFIG_TARGET_P5040DS=y -CONFIG_MPC85XX_HAVE_RESET_VECTOR=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_SYS_FSL_NUM_CC_PLLS=3 -CONFIG_MP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p5040ds.cfg" -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" -CONFIG_ARCH_MISC_INIT=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_ID_EEPROM=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PBSIZE=276 -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_NAND=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC1" -CONFIG_DM=y -CONFIG_FSL_SATA_V2=y -CONFIG_SYS_SATA_MAX_DEVICE=2 -CONFIG_FSL_CAAM=y -CONFIG_SYS_SPD_BUS_NUM=1 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_BR0_PRELIM_BOOL=y -CONFIG_SYS_BR0_PRELIM=0xFFA00C21 -CONFIG_SYS_OR0_PRELIM=0xFFFC0796 -CONFIG_SYS_BR1_PRELIM_BOOL=y -CONFIG_SYS_BR1_PRELIM=0xE0001001 -CONFIG_SYS_OR1_PRELIM=0xF8000FF7 -CONFIG_SYS_BR2_PRELIM_BOOL=y -CONFIG_SYS_BR2_PRELIM=0xE8001001 -CONFIG_SYS_OR2_PRELIM=0xF8000F85 -CONFIG_SYS_BR3_PRELIM_BOOL=y -CONFIG_SYS_BR3_PRELIM=0xFFDF0801 -CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_MTD_RAW_NAND=y -CONFIG_NAND_FSL_ELBC=y -CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x100000 -CONFIG_MII=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_NAND=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P5040DS_SDCARD_defconfig b/configs/P5040DS_SDCARD_defconfig deleted file mode 100644 index 4111901fc4..0000000000 --- a/configs/P5040DS_SDCARD_defconfig +++ /dev/null @@ -1,107 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFFF40000 -CONFIG_SYS_MALLOC_LEN=0x100000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0xCF400 -CONFIG_DEFAULT_DEVICE_TREE="p5040ds" -CONFIG_MPC85xx=y -CONFIG_TARGET_P5040DS=y -CONFIG_MPC85XX_HAVE_RESET_VECTOR=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_SYS_FSL_NUM_CC_PLLS=3 -CONFIG_MP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p5040ds.cfg" -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" -CONFIG_ARCH_MISC_INIT=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_ID_EEPROM=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PBSIZE=276 -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_MMC=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC1" -CONFIG_DM=y -CONFIG_FSL_SATA_V2=y -CONFIG_SYS_SATA_MAX_DEVICE=2 -CONFIG_FSL_CAAM=y -CONFIG_SYS_SPD_BUS_NUM=1 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_BR0_PRELIM_BOOL=y -CONFIG_SYS_BR0_PRELIM=0xE8001001 -CONFIG_SYS_OR0_PRELIM=0xF8000F85 -CONFIG_SYS_BR1_PRELIM_BOOL=y -CONFIG_SYS_BR1_PRELIM=0xE0001001 -CONFIG_SYS_OR1_PRELIM=0xF8000FF7 -CONFIG_SYS_BR3_PRELIM_BOOL=y -CONFIG_SYS_BR3_PRELIM=0xFFDF0801 -CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0xD2000 -CONFIG_MII=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_MMC=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P5040DS_SPIFLASH_defconfig b/configs/P5040DS_SPIFLASH_defconfig deleted file mode 100644 index 5d493ee89c..0000000000 --- a/configs/P5040DS_SPIFLASH_defconfig +++ /dev/null @@ -1,109 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xFFF40000 -CONFIG_SYS_MALLOC_LEN=0x100000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_OFFSET=0x100000 -CONFIG_ENV_SECT_SIZE=0x10000 -CONFIG_DEFAULT_DEVICE_TREE="p5040ds" -CONFIG_MPC85xx=y -CONFIG_TARGET_P5040DS=y -CONFIG_MPC85XX_HAVE_RESET_VECTOR=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_SYS_FSL_NUM_CC_PLLS=3 -CONFIG_MP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_RAMBOOT_PBL=y -CONFIG_SPIFLASH=y -CONFIG_SYS_FSL_PBL_PBI="board/freescale/corenet_ds/pbi.cfg" -CONFIG_SYS_FSL_PBL_RCW="board/freescale/corenet_ds/rcw_p5040ds.cfg" -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" -CONFIG_ARCH_MISC_INIT=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_ID_EEPROM=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PBSIZE=276 -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC1" -CONFIG_DM=y -CONFIG_FSL_SATA_V2=y -CONFIG_SYS_SATA_MAX_DEVICE=2 -CONFIG_FSL_CAAM=y -CONFIG_SYS_SPD_BUS_NUM=1 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_BR0_PRELIM_BOOL=y -CONFIG_SYS_BR0_PRELIM=0xE8001001 -CONFIG_SYS_OR0_PRELIM=0xF8000F85 -CONFIG_SYS_BR1_PRELIM_BOOL=y -CONFIG_SYS_BR1_PRELIM=0xE0001001 -CONFIG_SYS_OR1_PRELIM=0xF8000FF7 -CONFIG_SYS_BR3_PRELIM_BOOL=y -CONFIG_SYS_BR3_PRELIM=0xFFDF0801 -CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0x110000 -CONFIG_MII=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/configs/P5040DS_defconfig b/configs/P5040DS_defconfig deleted file mode 100644 index dbcb02765d..0000000000 --- a/configs/P5040DS_defconfig +++ /dev/null @@ -1,104 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xEFF40000 -CONFIG_SYS_MALLOC_LEN=0x100000 -CONFIG_ENV_SIZE=0x2000 -CONFIG_ENV_SECT_SIZE=0x20000 -CONFIG_DEFAULT_DEVICE_TREE="p5040ds" -CONFIG_ENV_ADDR=0xEFF20000 -CONFIG_MPC85xx=y -CONFIG_TARGET_P5040DS=y -CONFIG_MPC85XX_HAVE_RESET_VECTOR=y -CONFIG_ENABLE_36BIT_PHYS=y -CONFIG_SYS_BOOK3E_HV=y -CONFIG_SYS_CACHE_STASHING=y -CONFIG_PCIE1=y -CONFIG_PCIE2=y -CONFIG_PCIE3=y -CONFIG_SYS_FSL_NUM_CC_PLLS=3 -CONFIG_MP=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_DYNAMIC_SYS_CLK_FREQ=y -CONFIG_BOOTDELAY=10 -CONFIG_USE_BOOTCOMMAND=y -CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/$bdev rw console=$consoledev,$baudrate $othbootargs;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr - $fdtaddr" -CONFIG_ARCH_MISC_INIT=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_ID_EEPROM=y -CONFIG_HUSH_PARSER=y -CONFIG_SYS_PBSIZE=276 -CONFIG_CMD_IMLS=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_USB=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_EXT2=y -CONFIG_CMD_FAT=y -CONFIG_OF_CONTROL=y -CONFIG_ENV_OVERWRITE=y -CONFIG_ENV_IS_IN_FLASH=y -CONFIG_USE_BOOTFILE=y -CONFIG_BOOTFILE="uImage" -CONFIG_USE_ETHPRIME=y -CONFIG_ETHPRIME="FM1@DTSEC1" -CONFIG_DM=y -CONFIG_FSL_SATA_V2=y -CONFIG_SYS_SATA_MAX_DEVICE=2 -CONFIG_FSL_CAAM=y -CONFIG_SYS_SPD_BUS_NUM=1 -CONFIG_DDR_ECC=y -CONFIG_ECC_INIT_VIA_DDRCONTROLLER=y -CONFIG_SYS_BR0_PRELIM_BOOL=y -CONFIG_SYS_BR0_PRELIM=0xE8001001 -CONFIG_SYS_OR0_PRELIM=0xF8000F85 -CONFIG_SYS_BR1_PRELIM_BOOL=y -CONFIG_SYS_BR1_PRELIM=0xE0001001 -CONFIG_SYS_OR1_PRELIM=0xF8000FF7 -CONFIG_SYS_BR3_PRELIM_BOOL=y -CONFIG_SYS_BR3_PRELIM=0xFFDF0801 -CONFIG_SYS_OR3_PRELIM=0xFFFFEFF7 -CONFIG_DM_I2C=y -CONFIG_I2C_SET_DEFAULT_BUS_NUM=y -CONFIG_SYS_I2C_FSL=y -CONFIG_SYS_I2C_EEPROM_ADDR=0x57 -CONFIG_FSL_ESDHC=y -CONFIG_MTD=y -CONFIG_MTD_NOR_FLASH=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_SYS_FLASH_EMPTY_INFO=y -CONFIG_SYS_FLASH_CFI=y -CONFIG_SYS_FLASH_QUIET_TEST=y -CONFIG_SYS_MAX_FLASH_SECT=1024 -CONFIG_SYS_MAX_FLASH_BANKS=2 -CONFIG_DM_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=10000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_PHYLIB=y -CONFIG_PHYLIB_10G=y -CONFIG_PHY_TERANETICS=y -CONFIG_PHY_VITESSE=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_FMAN_FW_ADDR=0xEFF00000 -CONFIG_MII=y -CONFIG_DM_PCI_COMPAT=y -CONFIG_PCIE_FSL=y -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_DM_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_USB=y -CONFIG_USB_EHCI_FSL=y -CONFIG_USB_MAX_CONTROLLER_COUNT=2 -CONFIG_USB_STORAGE=y -CONFIG_ADDR_MAP=y -CONFIG_SYS_NUM_ADDR_MAP=64 diff --git a/doc/README.pblimage b/doc/README.pblimage index 7fdd26b71b..58202c14a2 100644 --- a/doc/README.pblimage +++ b/doc/README.pblimage @@ -61,7 +61,7 @@ Following steps describe it in detail. Board specific configuration file specifications: ------------------------------------------------ 1. Configuration files rcw.cfg and pbi.cfg must present in the -board/freescale/corenet_ds/, rcw.cfg is for RCW, pbi.cfg is for +board/freescale// directory, rcw.cfg is for RCW, pbi.cfg is for PBI instructions. File name must not be changed since they are used in Makefile. 2. These files can have empty lines and lines starting with "#" as first diff --git a/include/configs/P3041DS.h b/include/configs/P3041DS.h deleted file mode 100644 index 42e507bac0..0000000000 --- a/include/configs/P3041DS.h +++ /dev/null @@ -1,18 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2010-2011 Freescale Semiconductor, Inc. - */ - -/* - * P3041 DS board configuration file - * - */ -#define CONFIG_SYS_DPAA_RMAN - -#define CONFIG_SYS_SRIO -#define CONFIG_SRIO1 /* SRIO port 1 */ -#define CONFIG_SRIO2 /* SRIO port 2 */ -#define CONFIG_SRIO_PCIE_BOOT_MASTER -#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ - -#include "corenet_ds.h" diff --git a/include/configs/P4080DS.h b/include/configs/P4080DS.h deleted file mode 100644 index fd558398e4..0000000000 --- a/include/configs/P4080DS.h +++ /dev/null @@ -1,17 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - */ - -/* - * P4080 DS board configuration file - * Also supports P4040 DS - */ - -#define CONFIG_SYS_SRIO -#define CONFIG_SRIO1 /* SRIO port 1 */ -#define CONFIG_SRIO2 /* SRIO port 2 */ -#define CONFIG_SRIO_PCIE_BOOT_MASTER -#define CONFIG_ICS307_REFCLK_HZ 33333000 /* ICS307 ref clk freq */ - -#include "corenet_ds.h" diff --git a/include/configs/P5040DS.h b/include/configs/P5040DS.h deleted file mode 100644 index c8fc879d2f..0000000000 --- a/include/configs/P5040DS.h +++ /dev/null @@ -1,13 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright 2009-2011 Freescale Semiconductor, Inc. - */ - -/* - * P5040 DS board configuration file - * - */ - -#define CONFIG_ICS307_REFCLK_HZ 25000000 /* ICS307 ref clk freq */ - -#include "corenet_ds.h" -- 2.39.5