Bin Meng [Wed, 27 May 2020 09:04:52 +0000 (02:04 -0700)]
riscv: sbi: Remove sbi_spec_version
U-Boot defaults to use SBI v0.2. Howerver there is a global variable
sbi_spec_version that stills refers to v0.1. Since it is not used
anywhere, let's remove it.
Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Rick Chen <rick@andestech.com>
Pragnesh Patel [Fri, 29 May 2020 06:03:38 +0000 (11:33 +0530)]
configs: fu540: Add config options for U-Boot SPL
With sifive_fu540_defconfig:
User can use FSBL or u-boot-spl.bin anyone at a time.
For FSBL,
fsbl->fw_payload.bin (opensbi + U-Boot)
For u-boot-spl.bin,
u-boot-spl.bin->FIT image (opensbi + U-Boot proper + dtb)
U-Boot SPL will be loaded by ZSBL from SD card (replace fsbl.bin with
u-boot-spl.bin) and runs in L2 LIM in machine mode and then load FIT
image u-boot.itb from SD card into RAM.
U-Boot SPL expects u-boot.itb FIT image at the starting of SD card sector
number (0x822) of GUID type "2E54B353-1271-4842-806F-E436D6AF6985"
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Pragnesh Patel [Fri, 29 May 2020 06:03:35 +0000 (11:33 +0530)]
riscv: sifive: fu540: add SPL configuration
Add a support for SPL which will boot from L2 LIM (0x0800_0000) and
then SPL will boot U-Boot FIT image (OpenSBI FW_DYNAMIC + u-boot.bin)
from MMC boot devices.
SPL related code is leveraged from FSBL
(https://github.com/sifive/freedom-u540-c000-bootloader.git)
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Pragnesh Patel [Fri, 29 May 2020 06:03:34 +0000 (11:33 +0530)]
riscv: cpu: fu540: Add support for cpu fu540
Add SiFive fu540 cpu to support RISC-V arch
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Pragnesh Patel [Fri, 29 May 2020 06:03:32 +0000 (11:33 +0530)]
riscv: sifive: dts: fu540: set ethernet clock rate
Set ethernet clock rate to 125 Mhz so that it will work with 1000Mbps,
Earlier this is done by FSBL. With this change We can remove the
ethernet clock rate code from FSBL.
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
U-Boot ethernet works with FSBL flow where releasing ethernet clock
reset is part of FSBL itself but with the SPL, We need to release
ethernet clock reset explicitly for U-Boot proper. With this change
Release ethernet clock reset code in FSBL might not be needed or
unaffected.
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Pragnesh Patel [Fri, 29 May 2020 06:03:29 +0000 (11:33 +0530)]
clk: sifive: fu540-prci: Add clock enable and disable ops
Added clock enable and disable functions in prci ops
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Acked-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Pragnesh Patel [Fri, 29 May 2020 06:03:28 +0000 (11:33 +0530)]
riscv: sifive: dts: fu540: add U-Boot dmc node
Add dmc node to enable ddr driver. dmc is used to
initialize the memory controller.
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Devicetree files in FU540 platform is synced from Linux, like other
platforms does. Apart from these U-Boot in FU540 would also require
some U-Boot specific node like clint.
So, create board specific -u-boot.dtsi files. This would help of
maintain U-Boot specific changes separately without touching Linux
dts(i) files which indeed easy for syncing from Linux between
releases.
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Pragnesh Patel [Fri, 29 May 2020 06:03:22 +0000 (11:33 +0530)]
riscv: sifive: fu540: Use OTP DM driver for serial environment variable
Use the OTP DM driver to set the serial environment variable.
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Pragnesh Patel [Fri, 29 May 2020 06:03:21 +0000 (11:33 +0530)]
misc: add driver for the SiFive otp controller
Added a misc driver to handle OTP memory in SiFive SoCs.
Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Tom Rini [Wed, 3 Jun 2020 15:44:12 +0000 (11:44 -0400)]
Merge branch '2020-06-03-misc-bugfixes'
- Update various docs to not have 'ARCH=' in them as that's not part of
how U-Boot builds.
- Add macOS tools-only build to Azure to help catch problems on BSD
hosts with tools.
- Bugfixes from the latest header cleanup around ARCH_DMA_MINALIGN
- Assorted small Kconfig logic/typo corrections
- Add a default hash to FIT images that have their its auto generated.
- Other assorted fixes
Frédéric Danis [Wed, 20 May 2020 07:13:26 +0000 (09:13 +0200)]
bootcount_ext: Add Ext4 build dependency
This config option depends on EXT4 support.
If Ext4 write capability is not selected, it generate write error messages
and is unable to maintain boot counter.
Tom Rini [Tue, 26 May 2020 18:36:51 +0000 (14:36 -0400)]
rockchip: Remove ARCH= references from documentation
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.
Acked-by: Kever Yang <kever.yang@rock-chips.com> Cc: Simon Glass <sjg@chromium.org> Cc: Philipp Tomsich <philipp.tomsich@theobroma-systems.com> Acked-by: Klaus Goger <klaus.goger@theobroma-systems.com> Cc: Jagan Teki <jagan@amarulasolutions.com> Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Tue, 26 May 2020 18:36:49 +0000 (14:36 -0400)]
imx: Remove ARCH= references from documentation
When building U-Boot we select the architecture via Kconfig and not ARCH
being passed in via the environment or make cmdline.
Cc: Adam Ford <aford173@gmail.com> Cc: Vanessa Maegima <vanessa.maegima@nxp.com> Cc: Otavio Salvador <otavio@ossystems.com.br> Cc: Igor Opaniuk <igor.opaniuk@toradex.com> Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Wed, 27 May 2020 00:39:03 +0000 (20:39 -0400)]
Azure: Add 'tools-only' build for macOS X hosts
Add building the 'tools-only' target on macOS X 'Catalina'. Hopefully
this will catch changes to host tools that are incompatible on BSD style
environments.
Harald Seiler [Thu, 28 May 2020 15:54:45 +0000 (17:54 +0200)]
tools: fw_env: Fix warning when reading too little
When using CONFIG_ENV_IS_IN_FAT and the config-file specifies a size
larger than what U-Boot wrote into the env-file, a confusing error
message is shown:
$ fw_printenv
Read error on /boot/uboot.env: Success
Fix this by showing a different error message when read returns too
little data.
Simon Glass [Sat, 30 May 2020 16:29:03 +0000 (10:29 -0600)]
usb: ohci: Add header file for ARCH_DMA_MINALIGN
This is defined in the asm/cache.h header file. Update this header file to
include it so it gets the same value consistently across U-Boot.
This fixes 'usb host' on omapl138_lcdk.
Fixes: 90526e9fbac ("common: Drop net.h from common header") Reported-by: Adam Ford <aford173@gmail.com> Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Adam Ford <aford173@gmail.com> Reviewed-by: Tom Rini <trini@konsulko.com>
- Corrected some FSP-M/FSP-S settings for Chromebook Coral
- ICH SPI driver and mrccache fixes for obtaining the SPI memory map
- Fixed various warnings generated by latest version IASL when compiling
ACPI tables
Bin Meng [Mon, 1 Jun 2020 04:15:15 +0000 (21:15 -0700)]
x86: quark: acpi: Replace _ADR() by _UID() in description of PCI host bridge
PCI Firmware specification requires _UID() and doesn't require _ADR()
to be set. Replace latter by former. This fixes the following warning
reported by ACPICA 20200430:
Warning 3073 - Multiple types (Device object requires either a _HID
or _ADR, but not both)
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Bin Meng [Mon, 1 Jun 2020 04:15:14 +0000 (21:15 -0700)]
x86: baytrail: acpi: Replace _ADR() by _UID() in description of PCI host bridge
PCI Firmware specification requires _UID() and doesn't require _ADR()
to be set. Replace latter by former. This fixes the following warning
reported by ACPICA 20200430:
Warning 3073 - Multiple types (Device object requires either a _HID
or _ADR, but not both)
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Bin Meng [Mon, 1 Jun 2020 04:15:13 +0000 (21:15 -0700)]
x86: baytrail: acpi: Create buffers outside of the methods
Create buffers outside of the methods as ACPICA 20200430 complains
about this:
Remark 2173 - Creation of named objects within a method is highly
inefficient, use globals or method local variables instead
(\_SB.PCI0.LPCB.IURT._CRS)
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Andy Shevchenko [Thu, 28 May 2020 09:17:36 +0000 (12:17 +0300)]
x86: tangier: acpi: Drop _HID() where enumerated by _ADR()
ACPICA complains that either _HID() or _ADR() should be used.
For General Purpose DMA we may not drop the _ADR() because
the device is enumerated by PCI. Thus, simple drop _HID().
Reported-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Thu, 28 May 2020 09:17:35 +0000 (12:17 +0300)]
x86: tangier: acpi: Drop _ADR() where _HID() is present
ACPICA complains that either _HID() or _ADR() should be used.
Drop _ADR() where _HID() is present.
Reported-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Thu, 28 May 2020 09:17:34 +0000 (12:17 +0300)]
x86: tangier: acpi: Replace _ADR() by _UID() in description of PCI host bridge
PCI Firmware specification requires _UID() and doesn't require _ADR()
to be set. Replace latter by former.
Reported-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
Andy Shevchenko [Thu, 28 May 2020 09:17:33 +0000 (12:17 +0300)]
x86: tangier: acpi: Create buffers outside of the methods
Create buffers outside of the methods as ACPICA 20200214 complains about this:
Remark 2173 - Creation of named objects within a method is
highly inefficient, use globals or method local variables
instead
Reported-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Wed, 27 May 2020 11:42:13 +0000 (05:42 -0600)]
x86: coral: Correct some FSP-S settings
Some settings were modified slightly in the device-tree conversion. Return
these to their original values. This includes some audio settings and a
few others that have changed.
Note that we still rely on the FSP defaults for most values, so there is
no need to specify a value if the FSP default is suitable.
This makes WiFi work again.
Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Bin Meng <bmeng.cn@gmail.com>
Simon Glass [Wed, 27 May 2020 12:58:49 +0000 (06:58 -0600)]
x86: mrccache: Allow use before driver model is active
The change to avoid searching the device tree does not work on boards
wich don't have driver model set up this early, for example minnowmax.
Put back the old code (converted to livetree) as a fallback for these
devices. Also update the documentation.
This is tested on minnowmax, link, samus and coral.
Fixes: 87f1084a630 (x86: Adjust mrccache_get_region() to use livetree) Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> (on Intel minnowmax)
Simon Glass [Wed, 27 May 2020 12:58:47 +0000 (06:58 -0600)]
x86: spi: Rewrite logic for obtaining the SPI memory map
At present this logic does not work on link and samus, since their SPI
controller is not a PCI device, but a child of the PCH.
Unfortunately, fixing this involves a lot of extra logic. Still, this was
requested in the review of the fix-up patch, so here it is.
Fixes: 92842147c31 ("spi: ich: Add support for get_mmap() method") Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Tested-by: Bin Meng <bmeng.cn@gmail.com> (on Intel minnowmax)
Simon Glass [Wed, 27 May 2020 12:58:46 +0000 (06:58 -0600)]
x86: spi: Add a way to access the SPI mapping via registers
At present the PCI BDF (bus/device/function) is needed to access the SPI
mapping, since the registers are at BAR0. This doesn't work when PCI
auto-config has not been done yet, since BARs are unassigned.
Add another way to find the mapping, using the MMIO base, if the caller
knows this.
Also add a missing function comment.
Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Samuel Holland [Thu, 7 May 2020 23:10:50 +0000 (18:10 -0500)]
net: sun8i_emac: Use consistent clock bitfield definitions
While the R40 uses a different register for EMAC clock configuration
than other chips, the register has a very similar layout. Reuse the
existing bitfield definitions in this file, since they match.
This allows the driver to compile on the H6 platform, where the
CCM_GMAC_CTRL definitions are not present.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Samuel Holland [Thu, 7 May 2020 23:02:33 +0000 (18:02 -0500)]
sunxi: Silence warning about non-static inline function
When compiling with CONFIG_SPL_SERIAL=n, gcc warns about
mbus_configure_port not being marked as static:
In file included from include/common.h:34,
from arch/arm/mach-sunxi/dram_sunxi_dw.c:11:
include/log.h:185:4: warning: 'printf' is static but used in inline function 'mbus_configure_port' which is not static
185 | printf(pr_fmt(fmt), ##args); \
| ^~~~~~
include/log.h:192:2: note: in expansion of macro 'debug_cond'
192 | debug_cond(_DEBUG, fmt, ##args)
| ^~~~~~~~~~
arch/arm/mach-sunxi/dram_sunxi_dw.c:100:2: note: in expansion of macro 'debug'
100 | debug("MBUS port %d cfg0 %08x cfg1 %08x\n", port, cfg0, cfg1);
| ^~~~~
Fix this by updating the function accordingly.
Signed-off-by: Samuel Holland <samuel@sholland.org> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Fixes: 35fa673e0e5f ("sunxi: phy: Add USB PHY support for Allwinner H6") Signed-off-by: Roman Stratiienko <r.stratiienko@gmail.com> Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Wed, 13 May 2020 11:02:42 +0000 (16:32 +0530)]
env: sf: Free the old env_flash
env_flash is a global flash pointer, and the probe would
happen only if env_flash is NULL, but there is no checking
and free the pointer if is not NULL.
So, this patch frees the old env_flash, and get the probed
flash in to env_flash pointer and finally check if is not NULL.
Cc: Simon Glass <sjg@chromium.org> Cc: Vignesh R <vigneshr@ti.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Wed, 13 May 2020 10:58:01 +0000 (16:28 +0530)]
cmd: sf Drop reassignment of new into flash
The new pointer points to flash found and that would
assign it to global 'flash' pointer for further flash
operations and also keep track of old flash pointer.
This would happen if the probe is successful or even
failed, but current code assigning new into flash before
and after checking the new.
So, drop the assignment after new checks so flash always
latest new pointer even if probe failed or succeed.
Cc: Simon Glass <sjg@chromium.org> Cc: Vignesh R <vigneshr@ti.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Wed, 13 May 2020 10:02:23 +0000 (15:32 +0530)]
mtd: spi: Call sst_write in _write ops
Currently spi-nor code is assigning _write ops for SST
and other flashes separately.
Just call the sst_write from generic write ops and return
if SST flash found, this way it avoids the confusion of
multiple write ops assignment during the scan and makes
it more feasible for code readability.
No functionality changes.
Cc: Simon Glass <sjg@chromium.org> Cc: Vignesh R <vigneshr@ti.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Wed, 13 May 2020 12:46:39 +0000 (18:16 +0530)]
sf: Drop spl_flash_get_sw_write_prot
The get_sw_write_prot API is used to get the write-protected
bits of flash by reading the status register and other wards
it's API for reading register bits.
1) This kind of requirement can be achieved using existing
flash operations and flash locking API calls instead of
making a separate flash API.
2) Technically there is no real hardware user for this API to
use in the source tree.
3) Having a flash operations API for simple register read bits
also make difficult to extend the flash operations.
4) Instead of touching generic code, it is possible to have
this functionality inside spinor operations in the form of
flash hooks or fixups for associated flash chips.
Considering all these points, this patch drops the get_sw_write_prot
and associated code bases.
Cc: Simon Glass <sjg@chromium.org> Cc: Vignesh R <vigneshr@ti.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Tue, 12 May 2020 18:41:27 +0000 (00:11 +0530)]
mtd: spi: Use CONFIG_IS_ENABLED to prevent ifdef
Use CONFIG_IS_ENABLED to prevent ifdef in sf_probe.c
Cc: Simon Glass <sjg@chromium.org> Cc: Vignesh R <vigneshr@ti.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tom Rini [Mon, 1 Jun 2020 00:07:39 +0000 (20:07 -0400)]
Merge tag 'u-boot-rockchip-20200531' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- Fix mmc of path after syncfrom kernel dts;
- Add dwc3 host support with DM for rk3399;
- Add usb2phy and typec phy for rockchip platform;
- Migrate board list doc to rockchip.rst;
- Add rk3399 Pinebook Pro board support;
- Update dram_init in board_init and add memory node in SPL;
Heiko Stuebner [Mon, 25 May 2020 17:57:25 +0000 (19:57 +0200)]
spl: add fixed memory node in target fdt also when loading ATF
In a loading chain SPL -> ATF (->OP-TEE) -> U-Boot, ATF and a subsequent
OP-TEE will re-use the same fdt as the U-Boot target and may need the
information about usable memory ranges.
Especially OP-TEE needs this to initialize dynamic shared memory
(the only type U-Boot implements when talking to OP-TEE).
So allow spl_fixup_fdt() to take a fdt_blob argument, falling back to
the existing CONFIG_SYS_SPL_ARGS_ADDR if needed and call it from the
ATF path as well.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Philipp Tomsich <philipp.tomsich@theobroma-systems.com>
Heiko Stuebner [Mon, 25 May 2020 17:57:24 +0000 (19:57 +0200)]
rockchip: spl: do full dram_init instead of only probing
Parts of later SPL may need RAM information as well, so do full
dram_init() call, which includes the existing dram probing but also
initializes the ram information in gd.
dram_init() from sdram.c does the following steps:
- uclass_get_device(UCLASS_RAM, ...) like the current code
- ret = ram_get_info(dev, &ram);
- gd->ram_size = ram.size;
CONFIG_SPL_RAM already makes sure that sdram.c gets compiled
and thus no other variant of dram_init() can exist.
So it's the same functionality as before and only adds that the
SPL now aquires knowledge about the amount of available ram,
which it didn't know about before.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
As discussed at https://lore.kernel.org/linux-arm-kernel/b726290c-1038-3771-5187-6ac370bc92c9@arm.com/T/
the defconfig for rpi4 miss CONFIG_ARCH_FIXUP_FDT_MEMORY.
Without it, booting with an initrd fail.
Tom Rini [Sat, 30 May 2020 03:54:01 +0000 (23:54 -0400)]
Merge tag 'bugfixes-for-v2020.07-rc4' of https://gitlab.denx.de/u-boot/custodians/u-boot-i2c
i2c changes for v2020.07-rc4
- fix eeprom issue with AT24MAC402 (address != 0)
- fix in i2c-uclass.c when compiling compiling with -Wtype-limits
- designware_i2c: small fixes:
- check if the device is powered
- tidy up use of NULL priv
Sean Anderson [Mon, 4 May 2020 20:28:36 +0000 (16:28 -0400)]
patman: Modify functional tests for new behavior
This patch adds or modifies functional tests for the Cover-changes,
Commit-changes, and Series-process-log tags in order to account for new
behavior added in the previous few patches. The '(no changes since v1)'
case is not tested for, since that would need an additional commit to test
in addition to testing the existing code paths.
Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Sean Anderson [Mon, 4 May 2020 20:28:35 +0000 (16:28 -0400)]
patman: Support multi-line changes in changelogs
This patch adds support to multi-line changes. That is, if one has a line
in a changelog like
- Do a thing but
it spans multiple lines
Using Series-process-log sort would sort as if those lines were unrelated.
With this patch, any change line starting with whitespace will be
considered part of the change before it.
Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Sean Anderson [Mon, 4 May 2020 20:28:34 +0000 (16:28 -0400)]
patman: Add new tags for finer-grained changelog control
By default patman generates a combined changelog for the cover letter. This
may not always be desirable.
Many patches may have the same changes. These can be coalesced with
"Series-process-log: uniq", but this is imperfect. Similar changes like
"Move foo to patch 7" will not be merged with the similar "Move foo to this
patch from patch 6".
Changes may not make sense outside of the patch they are written for. For
example, a change line of "Add check for bar" does not make sense outside
of the context in which bar might be checked for. Some changes like "New"
or "Lint" may be repeated many times throughout different change logs, but
carry no useful information in a summary.
Lastly, I like to summarize the broad strokes of the changes I have made in
the cover letter, while documenting all the details in the appropriate
patches. I think this makes it easier to get a good feel for what has
changed, without making it difficult to wade through every change in the
whole series.
This patch adds two new tags to add changelog entries which only appear in
the cover letter, or only appear in the commit. Changes documented with
"Commit-changes" will only appear in the commit, and will not appear in the
cover letter. Changes documented with "Cover-changes" will not appear in
any commit, and will only appear in the cover letter.
Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Sean Anderson [Mon, 4 May 2020 20:28:33 +0000 (16:28 -0400)]
patman: Suppress empty changelog entries
Patman outputs a line for every edition of the series in every patch,
regardless of whether any changes were made. This can result in many
redundant lines in patch changelogs, especially when a patch did not exist
before a certain revision. For example, the existing behaviour could result
in a changelog of
Changes in v7: None
Changes in v6: None
Changes in v5:
- Make a change
Changes in v4: None
Changes in v3:
- New
Changes in v2: None
With this patch applied and with --no-empty-changes, the same patch would
look like
(no changes since v5)
Changes in v5:
- Make a change
Changes in v3:
- New
This is entirely aesthetic, but I think it reduces clutter, especially for
patches added later on in a series.
Signed-off-by: Sean Anderson <seanga2@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Bin Meng [Mon, 4 May 2020 07:52:44 +0000 (00:52 -0700)]
patman: Add an option to create patches without binary contents
Some mailing lists have size limits and when we add binary contents
to our patches it's easy to exceed the size limits.
Git supports a command line option "--no-binary" to generate patches
without any binary contents. Add an option in patman to handle this.
Note with this option patches cannot be applied properly, but they
are still useful for code review.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Stefan Roese [Wed, 29 Apr 2020 07:08:44 +0000 (09:08 +0200)]
dm: core: Reorder include files in read.c
Including the assembler headers before including common.h etc leads to
compilation errors upon MIPS64 based platforms using OF_LIVE. This
patch reorders the include files to the "correct" oder.
Signed-off-by: Stefan Roese <sr@denx.de> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
projects / u-boot.git / log
