]>
git.dujemihanovic.xyz Git - u-boot.git/log
Tom Rini [Thu, 10 May 2018 11:15:54 +0000 (07:15 -0400)]
.travis.yml: Further optimizations
- Xilinx aarch64 is caught in the general xilinx arm job, exclude from
the general aarch64 job.
- Give the generic aarch64 job a better name
- Re-sort the PowerPC jobs so that we can complete them a bit quicker.
Signed-off-by: Tom Rini <trini@konsulko.com>
Daniel Schwierzeck [Thu, 10 May 2018 11:15:53 +0000 (07:15 -0400)]
buildman: support newer gcc versions from kernel.org
Add support for gcc versions 7.3.0, 6.4.0 and 4.9.4.
Also use a regex for matching the tarball names. Some gcc versions
use '-ARCH-' instead of '_ARCH-'.
As part of this, we switch TravisCI to also using these toolchains for
all platforms.
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Thu, 10 May 2018 11:15:52 +0000 (07:15 -0400)]
at91: Minor tweaks to SPL logic for space savings on smartweb
- spl_board_init is empty on smartweb so drop that function
- When CONFIG_AT91SAM9_WATCHDOG is set we do not disable the watchdog in
SPL and instead let full U-Boot handle it. Instead of an empty
function just do not call a function.
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Tue, 22 May 2018 17:53:26 +0000 (13:53 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-uniphier
Masahiro Yamada [Tue, 22 May 2018 15:30:54 +0000 (00:30 +0900)]
ARM: dts: uniphier: sync with Linux 4.17-rc6
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Masahiro Yamada [Thu, 17 May 2018 10:55:20 +0000 (19:55 +0900)]
ARM: uniphier: rename environment variable fdt_file to fdtfile
For booting Linux in the generic distro mechanism, cmd/pxe.c
retrieves the FDT file name from "fdtfile" environment variable.
Rename "fdt_file" to "fdtfile" for easier migration to distro boot.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kunihiko Hayashi [Fri, 11 May 2018 09:49:17 +0000 (18:49 +0900)]
ARM: dts: uniphier: change phy-mode to 'internal' for LD11
Change the phy-mode property to 'internal' that means to use a built-in PHY
implemented on LD11 SoC.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kunihiko Hayashi [Fri, 11 May 2018 09:49:16 +0000 (18:49 +0900)]
ARM: dts: uniphier: add clock-names and reset-names to ethernet node
Add clock-names and reset-names because this node recognizes multiple
clocks and resets. ("ether", and so on, for each)
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kunihiko Hayashi [Fri, 11 May 2018 09:49:15 +0000 (18:49 +0900)]
ARM: dts: uniphier: add required clocks and resets to Pro4 ethernet node
The GIO clock/reset, another MAC clock, and the PHY clock are required
for the ethernet of Pro4 SoC.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kunihiko Hayashi [Fri, 11 May 2018 09:49:14 +0000 (18:49 +0900)]
ARM: dts: uniphier: add syscon-phy-mode property to each ethernet node
Add syscon-phy-mode property specifying a phandle of system controller
to each ethernet node.
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Tom Rini [Sun, 20 May 2018 13:47:45 +0000 (09:47 -0400)]
SPDX: Fixup SPDX tags in a few new files
Signed-off-by: Tom Rini <trini@konsulko.com>
Tom Rini [Sun, 20 May 2018 13:44:38 +0000 (09:44 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-sh
Tom Rini [Sun, 20 May 2018 13:44:13 +0000 (09:44 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-usb
Tom Rini [Sun, 20 May 2018 13:44:05 +0000 (09:44 -0400)]
Merge branch 'master' of git://git.denx.de/u-boot-socfpga
Marek Vasut [Wed, 2 May 2018 10:09:23 +0000 (12:09 +0200)]
ARM: rmobile: Unify Gen2 Makefile entry
Drop per-SoC Makefile entries and replace them with one unified entry
now that the PFC tables are gone. Shuffle the Makefile around a bit
to make it more organized.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Wed, 2 May 2018 10:07:45 +0000 (12:07 +0200)]
ARM: rmobile: Drop old R8A7794 PFC tables
All the boards use new modern PFC framework, the old PFC tables
are no longer used, so remove them.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Wed, 2 May 2018 10:07:18 +0000 (12:07 +0200)]
ARM: rmobile: Drop old R8A7793 PFC tables
All the boards use new modern PFC framework, the old PFC tables
are no longer used, so remove them.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Wed, 2 May 2018 10:06:48 +0000 (12:06 +0200)]
ARM: rmobile: Drop old R8A7792 PFC tables
All the boards use new modern PFC framework, the old PFC tables
are no longer used, so remove them.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Wed, 2 May 2018 10:06:08 +0000 (12:06 +0200)]
ARM: rmobile: Drop old R8A7791 PFC tables
All the boards use new modern PFC framework, the old PFC tables
are no longer used, so remove them.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Wed, 2 May 2018 10:05:08 +0000 (12:05 +0200)]
ARM: rmobile: Drop old R8A7790 PFC tables
All the boards use new modern PFC framework, the old PFC tables
are no longer used, so remove them.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Mon, 30 Apr 2018 12:10:36 +0000 (14:10 +0200)]
ARM: rmobile: Update V2H Blanche
The V2H Blanche port was broken since some time. This patch updates
the V2H Blanche port to use modern frameworks, DM, DT probing, SPL
for the preloading and puts it on par with the M2 Porter board.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Tue, 1 May 2018 06:57:25 +0000 (08:57 +0200)]
ARM: rmobile: Enable DM capable RCar I2C driver on Silk
Enable the DM capable driver instead of the legacy one.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Tue, 1 May 2018 06:57:20 +0000 (08:57 +0200)]
ARM: rmobile: Enable DM capable RCar I2C driver on Lager
Enable the DM capable driver instead of the legacy one.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Sat, 21 Apr 2018 16:57:28 +0000 (18:57 +0200)]
i2c: rcar_i2c: Add DM and DT capable I2C driver
Add derivative of the rcar_i2c driver which is capable of
probing itself from DM and uses DT.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Marek Vasut [Sat, 21 Apr 2018 16:54:27 +0000 (18:54 +0200)]
i2c: rcar_i2c: Remove the driver
Remove the rcar_i2c driver, since it's no longer used by any
board and will be superseded by a DM and DT capable variant.
Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Heiko Schocher <hs@denx.de>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
Tom Rini [Fri, 18 May 2018 21:54:39 +0000 (17:54 -0400)]
Fixup various SPDX tags from the latest merge
Signed-off-by: Tom Rini <trini@konsulko.com>
Mugunthan V N [Fri, 18 May 2018 11:10:27 +0000 (13:10 +0200)]
drivers: usb: dwc3: remove devm_zalloc from linux_compact
devm_zalloc() is already defined in dm/device.h header, so
devm_zalloc can be removed from linux_compact.h beader file.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 18 May 2018 11:15:09 +0000 (13:15 +0200)]
usb: xhci: zynqmp: Remove support for !DM_USB
Switch to DM_USB was done and there is no need to keep !DM_USB code in
tree.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Michal Simek [Fri, 18 May 2018 11:15:08 +0000 (13:15 +0200)]
arm64: zynqmp: Use DWC3 generic driver and DM_USB
Remove harcoded XHCI lists and detect mode, speed based on DT.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Serial-changes: 2
- Remove also XHCI macros from hardware.h
- Remove additional new line in zcu106
Michal Simek [Fri, 18 May 2018 11:15:07 +0000 (13:15 +0200)]
usb: xhci: zynqmp: Add support for DM_USB
The patch is adding support for DM_USB for xhci driver.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Fri, 18 May 2018 11:15:06 +0000 (13:15 +0200)]
usb: dwc3: Add generic DWC3 glue logic driver
By enabling BLK by default this is the next driver which needs to get
support for DM_USB. Adding generic DWC3 glue logic which only
parse nodes and read device mode. Based on it probe proper
host/peripheral DWC3 drivers for it.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Mugunthan V N [Fri, 18 May 2018 11:15:05 +0000 (13:15 +0200)]
usb: common: add support to get maximum speed from dt
Add support to get maximum speed from dt so that usb drivers
makes use of it for DT parsing.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
(rebase and fix errors)
Reviewed-by: Simon Glass <sjg@chromium.org>
Mugunthan V N [Fri, 18 May 2018 11:15:04 +0000 (13:15 +0200)]
usb: dwc3: Add dwc3_init/remove with DM_USB
The patch is preparing dwc3 core for enabling DM_USB with peripheral
driver with using driver model support.
The driver will be bound by the DWC3 wrapper driver based on the
dr_mode device tree entry.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
(Remove dwc3-omap changes)
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Patrice Chotard [Fri, 27 Apr 2018 09:01:55 +0000 (11:01 +0200)]
phy: add support for STM32 usb phy controller
This patch adds phy tranceiver driver for STM32 USB PHY
Controller (usbphyc) that provides dual port High-Speed
phy for OTG (single port) and EHCI/OHCI host controller
(two ports).
One port of the phy is shared between the two USB controllers
through a UTMI+ switch.
Signed-off-by: Christophe Kerello <christophe.kerello@st.com>
Signed-off-by: Amelie Delaunay <amelie.delaunay@st.com>
Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Seung-Woo Kim [Thu, 10 May 2018 01:52:15 +0000 (10:52 +0900)]
gadget: f_thor: update to support more than 4GB file as thor 5.0
During file download, it only uses 32bit variable for file size and
it limits maximum file size less than 4GB. Update to support more
than 4GB file with using two 32bit variables for file size as thor
protocol 5.0.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Seung-Woo Kim [Thu, 10 May 2018 01:52:14 +0000 (10:52 +0900)]
gadget: f_thor: fix filename overflow
The thor sender can send filename without null character and it is
used without consideration of overflow. Actually, character array
for filename is assigned with DEFINE_CACHE_ALIGN_BUFFER() and it
is bigger than size of memcpy, so there was no real overflow.
Fix filename overflow for code level integrity.
Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com>
Tom Rini [Fri, 18 May 2018 11:11:11 +0000 (07:11 -0400)]
Merge git://git.denx.de/u-boot-imx
Ley Foon Tan [Fri, 18 May 2018 14:05:35 +0000 (22:05 +0800)]
arm: dts: socfpga: stratix10: update dtsi and dts
Update dtsi and dts files for resets, phy node and other properties.
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Ley Foon Tan [Fri, 18 May 2018 14:05:25 +0000 (22:05 +0800)]
arm: socfpga: misc: Add CONFIG_SYS_L2_PL310 switch
Preparation for Stratix 10 enablement. In ARM64, L2 cache controller is
accessed through processor registers. So, add CONFIG_SYS_L2_PL310 switch
conditional build in order this file can by shared across other SOCFPGAs.
Signed-off-by: Chin Liang See <chin.liang.see@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Ley Foon Tan [Fri, 18 May 2018 14:05:24 +0000 (22:05 +0800)]
arm: socfpga: stratix10: Add pinmux support for Stratix10 SoC
Add pinmux driver support for Stratix SoC
Signed-off-by: Chin Liang See <chin.liang.see@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Ley Foon Tan [Fri, 18 May 2018 14:05:23 +0000 (22:05 +0800)]
arm: socfpga: stratix10: Add reset manager driver for Stratix10 SoC
Add Reset Manager driver support for Stratix SoC
Signed-off-by: Chin Liang See <chin.liang.see@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Ley Foon Tan [Fri, 18 May 2018 14:05:22 +0000 (22:05 +0800)]
arm: socfpga: stratix10: Add clock manager driver for Stratix10 SoC
Add Clock Manager driver support for Stratix SoC
Signed-off-by: Chin Liang See <chin.liang.see@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Ley Foon Tan [Fri, 18 May 2018 14:05:21 +0000 (22:05 +0800)]
arm: socfpga: stratix10: Add watchdog and firewall base addresses
Add the base address for watchdog and firewall.
Signed-off-by: Chin Liang See <chin.liang.see@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>
Ben Kalo [Tue, 15 May 2018 16:45:37 +0000 (19:45 +0300)]
ARM: socfpga: Fix Documentation errors in scu_registers
According to ARM Cortex-A9 MPCore TRM section 2.2 - SCU registers
Access Control register offset is 0x50.
Signed-off-by: Ben Kalo <ben.h.kalo@gmail.com>
Cc: Marek Vasut <marex@denx.de>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Tien Fong Chee [Tue, 5 Dec 2017 07:58:08 +0000 (15:58 +0800)]
ARM: socfpga: Adding SoCFPGA info for both SPL and U-Boot
SoC FPGA info is required in both SPL and U-Boot.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Tien Fong Chee [Tue, 5 Dec 2017 07:58:07 +0000 (15:58 +0800)]
ARM: socfpga: Adding clock frequency info for U-Boot
Clock frequency info is required in U-Boot because info would be erased
when transition from SPL to U-Boot.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Tien Fong Chee [Tue, 5 Dec 2017 07:58:04 +0000 (15:58 +0800)]
ARM: socfpga: Enable SPL memory allocation
Enable memory allocation in SPL for preparation to enable FAT
in SPL. Memory allocation is needed by FAT to work properly.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Tien Fong Chee [Tue, 5 Dec 2017 07:58:03 +0000 (15:58 +0800)]
configs: Add DDR Kconfig support for Arria 10
This patch enables DDR Kconfig support for Arria 10.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Tien Fong Chee [Tue, 5 Dec 2017 07:58:02 +0000 (15:58 +0800)]
ARM: socfpga: Add DDR driver for Arria 10
Add DDR driver support for Arria 10.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Tien Fong Chee [Tue, 5 Dec 2017 07:58:01 +0000 (15:58 +0800)]
ARM: socfpga: Add DRAM bank size initialization function
Add function for both multiple DRAM bank and single DRAM bank size
initialization. This common functionality could be used by every single
SOCFPGA board.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Tested-by: Ley Foon Tan <ley.foon.tan@intel.com>
Tien Fong Chee [Tue, 5 Dec 2017 07:58:00 +0000 (15:58 +0800)]
ARM: socfpga: Rename the gen5 sdram driver to more specific name
Current sdram driver is only applied to gen5 device, hence it is better
to rename sdram driver to more specific name which is related to gen5
device.
Signed-off-by: Tien Fong Chee <tien.fong.chee@intel.com>
Marek Vasut [Mon, 23 Apr 2018 20:49:31 +0000 (22:49 +0200)]
ARM: socfpga: Repair A10 EMAC reset handling
The EMAC reset and PHY mode configuration was never working on the
Arria10 SoC, fix this. This patch pulls out the common code into
misc.c and passes the SoC-specific function call in as a function
pointer.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Marek Vasut [Sat, 12 May 2018 10:00:47 +0000 (12:00 +0200)]
ARM: socfpga: Synchronize Arria10 SoCDK SDMMC handoff
Regenerate Altera Arria 10 SoCDK SDMMC handoff file using latest
Quartus to get the new set of clock bindings in.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Marek Vasut [Sun, 22 Apr 2018 23:37:57 +0000 (01:37 +0200)]
ARM: socfpga: Synchronize Arria10 DTs
Synchronize Altera Arria 10 DT sources with Linux 4.16.3 as of commit
ef8216d28a5920022cddcb694d2d75bd1f0035ca
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Marek Vasut [Mon, 7 May 2018 20:29:17 +0000 (22:29 +0200)]
ARM: socfpga: Sort the DT Makefile
Sort the Makefile entries, no functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Marek Vasut [Fri, 11 May 2018 22:09:21 +0000 (00:09 +0200)]
ARM: socfpga: Sync A10 clock manager binding parser
The A10 clock manager parsed DT bindings generated by Quartus the
bsp-editor to configure the A10 clocks. Sadly, those DT bindings
changed at some point. The clock manager patch used the old ones,
this patch replaces the bindings parser with one for the new set.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Marek Vasut [Fri, 11 May 2018 20:26:35 +0000 (22:26 +0200)]
ARM: socfpga: Convert to DM serial
Pull the serial port configuration from DT and use DM serial instead
of having the serial configuration in two places, DT and board config.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Marek Vasut [Fri, 11 May 2018 20:25:59 +0000 (22:25 +0200)]
ARM: socfpga: Clean up Kconfig entries
Shuffle the default Kconfig entries around so it is not such a mess.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Marek Vasut [Sun, 22 Apr 2018 23:26:10 +0000 (01:26 +0200)]
ARM: socfpga: Zap CONFIG_SOCFPGA_VIRTUAL_TARGET
This was never used, is not used anywhere and is just in the way
by adding annoying ifdeffery. Get rid of it.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Marek Vasut [Thu, 26 Apr 2018 20:23:05 +0000 (22:23 +0200)]
ARM: socfpga: Put stack at the end of SRAM
The global data are in the .data section, so there's no point in
reserving any space for it above stack. Put stack at the end of
SRAM.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Marek Vasut [Sat, 12 May 2018 09:56:10 +0000 (11:56 +0200)]
fdt: Add another Altera Arria10 clock init compatible
The DT bindings for the Arria10 clock init have changed, add another
compatible to make them work with U-Boot until a proper clock driver
gets written.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Tom Rini <trini@konsulko.com>
Cc: Chin Liang See <chin.liang.see@intel.com>
Cc: Dinh Nguyen <dinguyen@kernel.org>
Lukasz Majewski [Thu, 26 Apr 2018 13:07:18 +0000 (15:07 +0200)]
arm: imx53: Add support for imx53 boards from K+P
This commit adds support for DDC and HSC boards from
K+P in u-boot.
Console output:
U-Boot
2018.05-rc2-00090-g752b7ed6f9 (Apr 26 2018 - 14:24:24 +0200)
CPU: Freescale i.MX53 rev2.1 at 800 MHz
Reset cause: WDOG
Model: K+P iMX53
DRAM: 512 MiB
MMC: FSL_SDHC: 0
Loading Environment from MMC... OK
In: serial
Out: serial
Err: serial
Module EEPROM:
ID: TQMa53-CB.0401
SN:
63152762
MAC: 00:0b:64:03:14:2a
BBoard:40x0 Rev:10
Net: eth0: ethernet@
63fec000
Hit any key to stop autoboot: 0
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Lukasz Majewski [Tue, 15 May 2018 14:26:43 +0000 (16:26 +0200)]
sandbox: tests: Add tests for mc34708 PMIC device
Following tests has been added for mc34708 device:
- get_test for mc34708 PMIC
- Check if proper number of registers is read
- Check if default (emulated via i2c device) value is properly read
- Check if value write/read operation is correct
- Perform tests to check if pmic_clrsetbits() is working correctly
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Lukasz Majewski [Tue, 15 May 2018 14:26:42 +0000 (16:26 +0200)]
sandbox: tests: Exclude common test code (pmic_get) in test/dm/pmic.c
The common code can be excluded to be reused by tests for other PMIC.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Lukasz Majewski [Tue, 15 May 2018 14:26:41 +0000 (16:26 +0200)]
sandbox: Enable MC34708 PMIC support
This MC34708 PMIC is somewhat special - it used single transfers (R/W) with
3 bytes size - up till now U-Boot's PMICs only used 1 byte.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Lukasz Majewski [Tue, 15 May 2018 14:26:40 +0000 (16:26 +0200)]
sandbox: Enable support for MC34708 PMIC in DTS
This commit also provides the default values of the emulated MC34708 PMIC
internal registers content.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Lukasz Majewski [Tue, 15 May 2018 14:26:39 +0000 (16:26 +0200)]
sandbox: Rewrite i2c_pmic_emul.c to support PMIC with 3 bytes transmission
This change enables support for MC34708 PMIC in sandbox. Now we can
emulate the I2C transfers larger than 1 byte.
Notable changes for this driver:
- From now on the register number is not equal to index in the buffer,
which emulates the PMIC registers
- The PMIC register's pool is now dynamically allocated up till
64 regs * 3 bytes each = 192 B
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Lukasz Majewski [Tue, 15 May 2018 14:26:38 +0000 (16:26 +0200)]
pmic: Rewrite the pmic command to not only work with single byte transmission
Up till now it was only possible to use 'pmic' command with a single byte
transmission.
The pmic_read|write functions has been replaced with ones, which don't need
the transmission length as a parameter.
Due to that it is possible now to read data from PMICs transmitting more
data than 1 byte at once (e.g. mc34708)
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Lukasz Majewski [Tue, 15 May 2018 14:26:37 +0000 (16:26 +0200)]
pmic: dm: Add support for MC34708 for PMIC DM
This patch adds support for MC34708 PMIC, to be used with driver model
(DM).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Lukasz Majewski [Tue, 15 May 2018 14:26:36 +0000 (16:26 +0200)]
pmic: dm: Rewrite pmic_reg_{read|write|clrsetbits} to support 3 bytes transmissions
This commit provides support for transmissions larger than 1 byte for
PMIC devices used with DM (e.g. MC34708 from NXP).
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Lukasz Majewski [Tue, 15 May 2018 14:26:35 +0000 (16:26 +0200)]
pmic: Add support for setting transmission length in uclass private data
The struct uc_pmic_priv's trans_len field stores the number of types to
be transmitted per PMIC transfer.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Lukasz Majewski [Tue, 15 May 2018 14:26:34 +0000 (16:26 +0200)]
pmic: fsl: Define number of bytes sent at once by MC34708 PMIC
This patch adds definition of the number of bytes sent at once by the
MC34708 PMIC.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Lukasz Majewski [Tue, 15 May 2018 14:26:33 +0000 (16:26 +0200)]
pmic: fsl: Provide some more definitions for MC34708 PMIC
This commit adds some more defines for MC34708 PMIC.
Signed-off-by: Lukasz Majewski <lukma@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Jagan Teki [Mon, 7 May 2018 05:51:40 +0000 (11:21 +0530)]
configs: imx6dl-mamoj: Enable HAB
Enable Secure boot(HAB) for BTicino Mamoj board.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Mon, 7 May 2018 05:51:39 +0000 (11:21 +0530)]
configs: imx6dl-mamoj: Add Falcon mode support
Add Falcon mode support to boot Linux directly after SPL.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Mon, 7 May 2018 05:51:38 +0000 (11:21 +0530)]
configs: imx6dl-mamoj: Add DFU support
Add DFU support for BTicino Mamoj board and update
the same steps in README.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Jagan Teki [Mon, 7 May 2018 05:51:37 +0000 (11:21 +0530)]
configs: imx6dl_mamoj: Enable fastboot and ums
Enable fastboot and ums for host to interact eMMC on
Mamoj board.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Jagan Teki [Mon, 7 May 2018 05:51:36 +0000 (11:21 +0530)]
i.MX6DL: mamoj: Add PFUZE100 support
MX6DL Mamoj boards has Freescale PFUZE100 PMIC, add support
for it through DM_PMIC dt definition.
pmic log:
Reviewed-by: Stefano Babic <sbabic@denx.de>
========
=> pmic list
| Name | Parent name | Parent uclass @ seq
| pfuze100@08 | i2c@
021f8000 | i2c @ 3
=> pmic dev pfuze100@08
dev: 0 @ pfuze100@08
=> pmic dump
Dump pmic: pfuze100@08 registers
0x00: 10 00 00 21 00 01 3f 01 00 7f 00 00 00 00 00 81
0x10: 00 00 3f 00 00 00 00 00 00 00 00 10 00 00 00 00
0x20: 2b 2b 2b 08 c4 00 00 00 00 00 00 00 00 00 2b 2b
0x30: 2b 08 c4 00 00 72 72 72 08 d4 00 00 2c 2c 2c 08
0x40: e4 00 00 2c 2c 2c 08 e4 00 00 6f 6f 6f 08 f4 00
0x50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x60: 00 00 00 00 00 00 48 00 00 00 10 06 1e 1e 17 10
0x70: 1a 1f 00 00 00 00 00 00 00 00 00 00 00 00 00
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Jagan Teki [Mon, 7 May 2018 05:51:35 +0000 (11:21 +0530)]
i.MX6DL: mamoj: Add I2C support
i.MX6DL Mamoj has i2c3 and i2c4 buses, add support
through DM_I2C with dt definition.
i2c log:
Reviewed-by: Stefano Babic <sbabic@denx.de>
=======
=> i2c bus
Bus 2: i2c@
021a8000
Bus 3: i2c@
021f8000
=> i2c dev 2
Setting bus to 2
=> i2c speed 400000
Setting bus speed to 400000 Hz
=> i2c probe
Valid chip addresses: 20 51 53
=> i2c md 53 0xff
00ff: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
=> i2c md 51 0xff
00ff: a8 08 40 50 09 43 46 52 42 18 80 8e ae a9 d0 53 ..@P.CFRB......S
=> i2c dev 3
Setting bus to 3
=> i2c speed 100000
Setting bus speed to 100000 Hz
=> i2c probe
Valid chip addresses: 08 40 48 4B
=> i2c md 08 0xff
00ff: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Jagan Teki [Mon, 7 May 2018 05:51:34 +0000 (11:21 +0530)]
i.MX6: board: Add BTicino i.MX6DL Mamoj initial support
Add initial support for i.MX6DL BTicino Mamoj board.
Mamoh board added:
- SPL
- SPL_DM
- SPL_OF_CONTROL
- DM for U-Boot proper
- OF_CONTROL for U-Boot proper
- eMMC
- FEC
- Boot from eMMC
- Boot from USB SDP
Signed-off-by: Simone CIANNI <simone.cianni@bticino.it>
Signed-off-by: Raffaele RECALCATI <raffaele.recalcati@bticino.it>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Wed, 11 Apr 2018 12:32:23 +0000 (18:02 +0530)]
ARM: i.MX6: dts: Build dtb based on SOC type
Build dtb's based on SOC type instead building arch type.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Wed, 11 Apr 2018 12:32:22 +0000 (18:02 +0530)]
ARM: dts: i.MX6UL: U-Boot specific dts for u-boot, dm-spl
u-boot,dm-spl property is specific to U-Boot, so move it into
*u-boot.dtsi files for relevant i.MX6UL files.
This make syncing Linux dts files straight forward.
Also update the MAINTAINERS file for dts files.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Wed, 11 Apr 2018 12:32:21 +0000 (18:02 +0530)]
ARM: dts: imx6ul-isiot: Move usdhc2 into dtsi
Move usdhc2 node along with pinctrl to imx6ul-isiot.dts
from imx6ul-isiot-emmc.dts
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Jagan Teki [Wed, 11 Apr 2018 12:32:20 +0000 (18:02 +0530)]
ARM: dts: i.MX6QDL: U-Boot specific dts for u-boot, dm-spl
u-boot,dm-spl property is specific to U-Boot, so move it into
*u-boot.dtsi files for relevant i.MX6QDL files.
This make syncing Linux dts files straight forward.
Also update the MAINTAINERS file for dts files.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Guillaume GARDET [Wed, 18 Apr 2018 15:04:59 +0000 (17:04 +0200)]
imx6: sabrelite: update defconfig to use distro defaults
Boot tested with boot.scr script and EFI/Grub2 on mmc0 and mmc1 slots on sabrelite board.
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Guillaume GARDET [Wed, 18 Apr 2018 15:04:58 +0000 (17:04 +0200)]
imx6: Convert sabrelite and nitrogen6x boards to distro boot support
Boot tested on sabrelite board.
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Cc: Troy Kisky <troy.kisky@boundarydevices.com>
Cc: Stefano Babic <sbabic@denx.de>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Denis Pynkin <denis.pynkin@collabora.com>
Tom Rini [Thu, 17 May 2018 16:38:30 +0000 (12:38 -0400)]
Merge git://www.denx.de/git/u-boot-marvell
Chris Packham [Thu, 17 May 2018 12:12:04 +0000 (00:12 +1200)]
net: MVGBE don't automatically select PHYLIB
When Kconfig support was added for MVGBE it included automatically
selected PHYLIB support. But MVGBE does not need PHYLIB it will build
fine without it. Commit
ed52ea507f12 ("net: add Kconfig for MVGBE")
should have been a no-op in terms of build size but because of the
selecting PHYLIB the openrd configs increased in size.
Remove the automatic selection of PHYLIB, boards that need it will have
already enabled it in their config header file.
Fixes: commit ed52ea507f12 ("net: add Kconfig for MVGBE")
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Tue, 8 May 2018 10:34:21 +0000 (22:34 +1200)]
ARM: kirkwood: Add device-tree for sheevaplug
Import the dts files from Linux 4.17 and enable device tree control in
u-boot.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Tue, 8 May 2018 10:34:20 +0000 (22:34 +1200)]
ARM: kirkwood: Add device-tree for pogo_e02
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Tue, 8 May 2018 10:34:19 +0000 (22:34 +1200)]
ARM: kirkwood: Add device-tree for openrd
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Tue, 8 May 2018 10:34:17 +0000 (22:34 +1200)]
ARM: kirkwood: Add device-tree for nas220
Import the dts file from Linux 4.17 and enable CONFIG_OF_CONTROL.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Tue, 8 May 2018 10:34:16 +0000 (22:34 +1200)]
ARM: kirkwood: Add device-tree for iconnect
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Tue, 8 May 2018 10:34:15 +0000 (22:34 +1200)]
ARM: kirkwood: Add device-tree for ib62x0
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Tue, 8 May 2018 10:34:14 +0000 (22:34 +1200)]
ARM: kirkwood: Add device-tree for guruplug
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Tue, 8 May 2018 10:34:13 +0000 (22:34 +1200)]
ARM: kirkwood: Add device-tree for goflexhome
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Tue, 8 May 2018 10:34:12 +0000 (22:34 +1200)]
ARM: kirkwood: Add device-tree for dockstar
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Tue, 8 May 2018 10:34:11 +0000 (22:34 +1200)]
ARM: kirkwood: Add device-tree for dns325
Import the dts files from Linux 4.17 and enable CONFIG_OF_CONTROL.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Chris Packham [Tue, 8 May 2018 10:34:10 +0000 (22:34 +1200)]
ARM: add devicetree files for kirkwood SoC
These files are taken verbatim from the Linux kernel 4.17
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Stefan Roese <sr@denx.de>
Lukasz Majewski [Thu, 26 Apr 2018 11:19:13 +0000 (13:19 +0200)]
dts: pinctrl: Provide IMX_PAD_SION definition for imx53 pinctrl
The SION pin must be set for proper operation of I2C when DM is enabled.
When legacy I2C is used, this bit is set implicitly in the u-boot code:
arch/arm/include/asm/arch-mx5/iomux-mx53.h:92:
MX53_PAD_KEY_ROW3__I2C2_SDA = IOMUX_PAD(0x368, 0x040, 4 |
IOMUX_CONFIG_SION, 0x820, 0, NO_PAD_CTRL),
The Linux kernel uses similar approach with:
arch/arm/boot/dts/imx53-tqma53.dtsi:182:
MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
After applying this patch it is possible to have the I2C working with DM
on imx53 devices:
MX53_PAD_KEY_ROW3__I2C2_SDA (0x1ee | IMX_PAD_SION)
Signed-off-by: Lukasz Majewski <lukma@denx.de>