Simon Glass [Mon, 14 Aug 2023 22:40:29 +0000 (16:40 -0600)]
expo: Add documentation for the configuration editor
This is mentioned in passing in the 'cedit' command. Its file format is
described under `expo`. But it would be better if it had its own entry
in the documentation.
Add a new 'cedit' entry with a few details about this feature.
Simon Glass [Mon, 14 Aug 2023 22:40:28 +0000 (16:40 -0600)]
expo: Tidy up the expo.py tool and usage
Tidy up this tool a little:
- define which arguments are needed
- split the enum values out into a header file
- warn if no enum values are found
- display the dtc error if something goes wrong
- avoid a Python traceback on error
Simon Glass [Mon, 14 Aug 2023 22:40:24 +0000 (16:40 -0600)]
expo: Refactor menu_build() to return the object created
The caller reads the ID but menu_build() does this again. Add the ID as
a parameter to avoid this. Return the object created so that the caller
can adjust it.
Tom Rini [Thu, 24 Aug 2023 21:42:48 +0000 (17:42 -0400)]
Merge branch '2023-08-24-enable-more-features-in-qemu-arm' into next
To quote the author:
Now that the driver for the Bochs VGA card emulated by QEMU is no longer
limited to x86 architectures, this series enables it on arm and arm64 virtual
machines to provide a graphical interface. In line with that series this also
enables console buffering and USB keyboard.
Tested with the Debian 12 installer using GRUB EFI:
doc: qemu: arm: Add a section on booting Linux distros
Add an example qemu-system-aarch64 command that can make U-Boot on QEMU
boot into the Debian Installer, along with resulting console messages
from U-Boot, based on the existing documentation section for the x86
version.
Commit 02be57caf730 ("riscv: qemu: Enable usb keyboard as an input
device") adds PCI xHCI support to QEMU RISC-V virtual machines and
enables using a USB keyboard as one of the input devices. Similarly,
enable those for ARM virtual machines as well.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng@tinylab.org>
Commit 608b80b5b855 ("riscv: qemu: Enable PRE_CONSOLE_BUFFER") enables
buffering console messages for QEMU RISC-V virtual machines so those
printed before the video console is available will still show up on the
display. Similarly, enable it for ARM virtual machines as well.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Bin Meng <bmeng@tinylab.org>
Commit 716161663ec49 ("riscv: qemu: Enable Bochs video support") enables
a video console for QEMU RISC-V virtual machines using an emulated Bochs
VGA card. Similarly, enable it for ARM virtual machines as well.
Signed-off-by: Alper Nebi Yasak <alpernebiyasak@gmail.com> Reviewed-by: Bin Meng <bmeng@tinylab.org>
Marek Vasut [Wed, 16 Aug 2023 15:05:55 +0000 (17:05 +0200)]
ufs: Implement cache management
Add function to flush and invalidate cache over request and response
queue entries, and perform flush and optional invalidate over block
layer data that are passed into the UFS layer. This makes it possible
to use UFS with caches enabled.
Marek Vasut [Wed, 16 Aug 2023 15:05:54 +0000 (17:05 +0200)]
ufs: Use utp_transfer_req_desc pointer in ufshcd_get_tr_ocs
Use utp_transfer_req_desc pointer to reference to utrdl queue
instead of referencing the queue directly. This makes the code
more consistent. No functional change.
Marek Vasut [Wed, 16 Aug 2023 15:05:53 +0000 (17:05 +0200)]
ufs: Pass hba pointer to ufshcd_prepare_req_desc_hdr()
Pass the hba pointer itself to ufshcd_prepare_req_desc_hdr()
instead of duplicating utp_transfer_req_desc access at each
call site. No functional change.
Marek Vasut [Wed, 16 Aug 2023 15:05:50 +0000 (17:05 +0200)]
ufs: Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS
Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS for host controllers which do not
support 64-bit addressing.
Ported from Linux kernel commit 6554400d6f66 ("scsi: ufs: core: Add UFSHCD_QUIRK_BROKEN_64BIT_ADDRESS")
with ufs_scsi_buffer_aligned() based on U-Boot generic bounce buffer.
In the case of NETLOOP_SUCCESS, the decimal value of the u32 variable
"net_boot_file_size" is printed using "%d", resulting in negative values
being reported for large file sizes. Fix this by using "%u" to print the
decimal value corresponding to the bytes transferred.
Fixes: 1411157d8578 ("net: cosmetic: Fixup var names related to boot file") Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Marek Vasut [Sun, 13 Aug 2023 23:50:00 +0000 (01:50 +0200)]
scsi: Add buffer_aligned check pass-through
Some devices have limited DMA capabilities and require that the
buffers passed to them fit specific properties. Add new optional
callback which can be used at driver level to indicate whether a
buffer alignment is suitable for the device DMA or not. This is
a pass-through callback from block uclass to drivers.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 13 Aug 2023 23:49:59 +0000 (01:49 +0200)]
blk: Add bounce buffer support to read/write operations
Some devices have limited DMA capabilities and require that the
buffers passed to them fit specific properties. Add new optional
callback which can be used at driver level to indicate whether a
buffer alignment is suitable for the device DMA or not, and
trigger use of generic bounce buffer implementation to help use
of unsuitable buffers at the expense of performance degradation.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Block devices with 4k sectors imply the MBR sectors are also 4k instead
of regular 512B. Avoid hard-coding the 512B sector size and isntead read
the current block device sector size from it, and if the sector size is
larger than 512B, use the block device sector size.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Vasut [Sun, 13 Aug 2023 23:47:47 +0000 (01:47 +0200)]
common: bouncebuf: Add missing cast to dma_addr_t
Fix the following warning produced on qemu-x86_64_defconfig:
"
common/bouncebuf.c: In function ‘bounce_buffer_stop’:
common/bouncebuf.c:82:34: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast]
82 | dma_unmap_single((dma_addr_t)state->bounce_buffer,
| ^
"
The warning is valid, the pointer has to be up-cast first.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Andrew Davis <afd@ti.com>
Marek Vasut [Sun, 13 Aug 2023 23:46:45 +0000 (01:46 +0200)]
disk: Extend disk_blk_part_validate() with range checking
Check whether access is out of bounds of the partition and
return an error. This way there is no danger of esp. write
or erase outside of the confines of partition.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 13 Aug 2023 23:46:44 +0000 (01:46 +0200)]
disk: Handle partition to block device offset conversion
Convert the read/write/erase offset from one within a partition
to one within a block device, to correctly access the data on
the block device for both write and erase operations.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 13 Aug 2023 23:46:43 +0000 (01:46 +0200)]
disk: Simplify disk_blk_{write, erase}() using blk_{write, erase}()
These two functions are basically identical, just call the blk_*()
functions from disk_blk_*() functions. The only difference is that
the disk_blk_*() functions have to use parent block device as the
udevice implementing block device operations.
Add documentation on what those functions really do. The documentation
is not wrong even though it likely does look that way. The write/erase
functions really do not take into account the partition offset. This
will be fixed in the next patch.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 13 Aug 2023 23:46:42 +0000 (01:46 +0200)]
disk: Simplify disk_blk_read() using blk_read()
The disk_blk_read() can be simplified using blk_read(), the only
things which needs to be handled are the read offset based on the
partition properties, and the block device ops which are coming
from the parent udevice, not the partition udevice.
The later is currently not implemented correctly as far as I can
tell, since the current code extracts block device descriptor from
the parent udevice which is OK, but extracts block device operations
from the partition udevice, which does not seem OK.
Switching to the blk_read() fixes that too.
The dev_get_blk() usage is simplified using UCLASS_PARTITION check.
Add non-confusing documentation what this really does.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 13 Aug 2023 23:46:41 +0000 (01:46 +0200)]
disk: Drop always true conditional check
if (device_get_uclass_id(dev) == UCLASS_PARTITION) is always
true, because this disk_blk_read() function calls dev_get_blk()
above and checks its return value for non-NULL. The dev_get_blk()
performs the same device_get_uclass_id(dev) check and returns NULL
if not UCLASS_PARTITION. Drop the duplicate check.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Marek Vasut [Sun, 13 Aug 2023 01:25:59 +0000 (03:25 +0200)]
test: acpi: Handle both 32bit and 64bit ACPI tables
Handle both 32bit and 64bit systems, i.e. sandbox and sandbox64
the same way drivers/cpu/cpu_sandbox.c sets those ACPI tables up.
This fixes "$ ./u-boot -Tc 'ut dm dm_test_acpi_write_tables'"
test failure on sandbox64.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Vasut [Sun, 13 Aug 2023 19:52:19 +0000 (21:52 +0200)]
test: cpu: Handle both 32bit and 64bit CPUs
Handle both 32bit and 64bit systems, i.e. sandbox and sandbox64
the same way drivers/cpu/cpu_sandbox.c does, that is in case
CONFIG_PHYS_64BIT is enabled, assume 64bit address width, else
assume 32bit address width. This fixes ut_dm_dm_test_cpu test
failure on sandbox64.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Vasut [Sun, 13 Aug 2023 05:15:05 +0000 (07:15 +0200)]
configs: sandbox64: Enable video 16bpp and 24bpp support
Align the sandbox64 defconfig with sandbox defconfig. Enable missing
16bpp and 24bpp video support. This fixes ut_dm_dm_test_video_bmp16
and ut_dm_dm_test_video_bmp24 tests .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Vasut [Sun, 13 Aug 2023 03:32:08 +0000 (05:32 +0200)]
test: dm: pinmux: Handle %pa in pinctrl-single mux output
The pinctrl-single driver uses %pa to print register value
in its single_get_pin_muxing() output. Handle this properly
in the test based on CONFIG_PHYS_64BIT .
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Paul Barker [Fri, 18 Aug 2023 13:17:21 +0000 (14:17 +0100)]
arm: rmobile: Fix off-by-one error in cpuinfo
In rmobile_cpuinfo_idx() there is an off-by-one error in accessing the
rmobile_cpuinfo array.
At the end of the loop, i is equal to the array size, i.e.
rmobile_cpuinfo[i] accesses one entry past the end of the array. The
last entry in the array is a fallback value so the loop should count to
ARRAY_SIZE(rmobile_cpuinfo) - 1 instead, this will leave i equal to the
index of the fallback value if no match is found.
Signed-off-by: Paul Barker <paul.barker.ct@bp.renesas.com> Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Tom Rini [Sat, 19 Aug 2023 14:13:28 +0000 (10:13 -0400)]
Merge tag 'doc-2023-10-rc3-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request doc-2023-10-rc3-2
Documentation:
* csf_examples: csf.sh: Remove unneeded export ATF_LOAD_ADDR line
* printf() codes: correct format specifier for unsigned int
* Fix typos in clk.h, irq.h.
* Correct description of proftool
Other:
* Quieten test for erofs filesystem presence
* spl: don't assume NVMe partition 1 exists
Fabio Estevam [Tue, 15 Aug 2023 13:48:01 +0000 (10:48 -0300)]
doc: csf_examples: csf.sh: Remove unneeded export ATF_LOAD_ADDR line
Originally, exporting the ATF_LOAD_ADDR was required, but since binman has
been used to generate the flash.bin, it is no longer needed to do
such manual export.
There is no requirement that a partition 1 exists in a partition table.
We should not try to retrieve information about it.
We should not even try reading with partition number
CONFIG_SYS_NVME_BOOT_PARTITION here as this is done in the fs_set_blk_dev()
call anyway.
Fixes: 8ce6a2e17577 ("spl: blk: Support loading images from fs") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Tom Rini [Fri, 18 Aug 2023 17:45:58 +0000 (13:45 -0400)]
Merge branch '2023-08-18-assorted-updates' into next
- Use built-in ffs/fls on ARM, fix a PIE issue in SPL on ARMv8, bcm283x
and mediatek updates, whitespace fix in UFS uclass, make CI use
"tools-only" defconfig for more tests, add TI TCA9554 GPIO support,
cache alignment fix for SCSI, and fix a problem with
SYS_MMCSD_RAW_MODE_ARGS_SECTOR in SPL.
Jonas Karlman [Thu, 17 Aug 2023 21:52:48 +0000 (21:52 +0000)]
rockchip: rk3566-anbernic-rgxx3: Rename defconfig to include SoC name
Rename defconfig to include SoC name, use similar pattern as other
RK356x boards: <soc>-<name>.dts -> <name>-<soc>_defconfig
Suggested-by: Kever Yang <kever.yang@rock-chips.com> Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Tom Rini [Fri, 18 Aug 2023 14:05:04 +0000 (10:05 -0400)]
Merge tag 'tegra-for-2023.10-rc1' of https://source.denx.de/u-boot/custodians/u-boot-tegra
ARM: tegra: Changes for v2023.10-rc1
This adds support for various new Tegra30 boards (ASUS, LG and HTC) and
has some other minor enhancements, such as enabling the poweroff command
on several Tegra210 and Tegra186 boards.
Tom Rini [Thu, 10 Aug 2023 16:52:24 +0000 (12:52 -0400)]
CI: Switch to tools-only from sandbox_spl for tooling tests
When running tools for various tests use the tools-only build rather
than sandbox_spl. We used sandbox_spl here for historical reasons that
are no longer true.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Elena Popa [Tue, 8 Aug 2023 13:42:15 +0000 (16:42 +0300)]
spl: mmc: Fix check of CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR
When Falcon Mode is enabled, SPL needs to check the value of
CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR. Unfortunately, it was using the
CONFIG_VAL(SYS_MMCSD_RAW_MODE_ARGS_SECTOR) which converts it into
CONFIG_SPL_SYS_MMCSD_RAW_MODE_ARGS_SECTOR when CONFIG_SPL_BUILD is
enabled. CONFIG_SPL_SYS_MMCSD_RAW_MODE_ARGS_SECTOR does not exist in
common/spl/Kconfig. Replaced with
defined(CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR).
Signed-off-by: Elena Popa <elena.popa@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com>
arm: bcm283x undefined reference to "print_cpuinfo"
Builds for Raspberry Pi targets fail when CONFIG_DISPLAY_CPUINFO is
enabled and following error can be seen -
common/board_f.o:(.rodata.init_sequence_f+0x90):
undefined reference to `print_cpuinfo'
Kevin Chen [Thu, 3 Aug 2023 08:12:18 +0000 (16:12 +0800)]
armv8: Skip PIE in SPL due to load alignment fault.
When PIE is enabled in start.S, u-boot/-spl use __rel_dyn_start
and _rel_dyn_end symbol to be loaded to and executed at a
different address than it was linked at.
u-boot-spl.lds is used in SPL build, but relocation information
section(.rela*) were discarded.
In line number 80 in arch/arm/cpu/armv8/u-boot-spl.lds
/DISCARD/ : { *(.rela*) }
If PIE enabled in SPL, __rel_dyn_start which is defined as
.rel_dyn_start in sections.c will be apended to the end of
.bss section.
In our ASPEED case, size of .bss section would let .rel_dyn_start
without 8-byte alignment, leading to alignment fault when
executing ldp instuction in pie_fix_loop.
Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>
Sean Anderson [Mon, 31 Jul 2023 21:27:33 +0000 (17:27 -0400)]
arm: Use builtins for ffs/fls
Since ARMv5, the clz instruction allows for efficient implementation of
ffs/fls with builtins. Until ARMv7 (with Thumb-2), this instruction is
only available in ARM mode. LTO makes it difficult to force specific
functions to be in ARM mode, as it is effectively a form of very
aggressive inlining. To work around this, fls/ffs are implemented in
assembly for ARMv5 and ARMv6 when compiling U-Boot in Thumb mode.
Overall, this saves around 75 bytes per call.
This code is synced with v5.15 of the Linux kernel.
Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Roger Quadros [Sat, 5 Aug 2023 08:14:40 +0000 (11:14 +0300)]
arm: dts: k3-am64: Sync DT with Linux v6.5-rc1
Sync all am642-evm/am642-sk related DT files
with Linux v6.5-rc1.
- drop timer1 in favor of main_timer0 in am64-main.dtsi.
Need to delete clock & power domain properties of
main_timer1 in -r5.dts else won't boot. This is because
timer_init is done during rproc_start to start System Firmware,
but we can't do any clock/power-domain operations before
System Firmware starts.
- same constraint applies to main_uart0
- drop cpsw3g custom DT property 'mac_efuse' and custom
DT node cpsw-phy-sel as driver picks these from standard
property/node.
- include board dts file in -r5 dts file to avoid duplication
of nodes. Include -u-boot.dtsi on top.
- drop duplicate nodes in -r5 dts and -u-boot.dtsi
This node should be in the board DT file and should come from upstream.
Moreover, this PMIC is no present on all variants of am642-sk
and will need a separate board DT file.
Jonas Karlman [Thu, 17 Aug 2023 06:04:34 +0000 (06:04 +0000)]
doc: rockchip: Add supported RK3566/RK3568 boards
Update Rockchip documentation to include RK3566/RK3568 boards already
supported. Also list Pine64 boards under RK3566 and drop defconfig to
match other listed boards.
Signed-off-by: Abdellatif El Khlifi <abdellatif.elkhlifi@arm.com> Cc: Tom Rini <trini@konsulko.com> Cc: Simon Glass <sjg@chromium.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Mon, 7 Aug 2023 21:08:11 +0000 (17:08 -0400)]
arm: Add arch/arm/dts/Makefile specifically to MAINTAINERS
In order to reduce the number of people that are cc'd on a patch for
simply touching arch/arm/dts/Makefile (which is a big common file) add
an entry specifically to MAINTAINERS under the ARM entry.
Signed-off-by: Tom Rini <trini@konsulko.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Tom Rini [Wed, 16 Aug 2023 15:23:58 +0000 (11:23 -0400)]
Merge tag 'u-boot-stm32-20230816' of https://source.denx.de/u-boot/custodians/u-boot-stm
DHSOM: Power cycle Buck3 in reset
DHCOM: Switch DWMAC RMII clock to MCO2
stm32f746: fix display pinmux
stm32mp: psci: Inhibit PDDS because CSTBYDIS is set
stm32mp1: DT alignment with v6.4
stm32mp1: add splashscreen with STMicroelectronics logo
stm32mp1: clk: remove error for disabled clock in stm32mp1_clk_get_parent
serial: stm32: Extend TC timeout
Marek Vasut [Wed, 26 Jul 2023 23:58:07 +0000 (01:58 +0200)]
ARM: dts: stm32: Switch DWMAC RMII clock to MCO2 on DHCOM
The DHCOM SoM has two options for supplying ETHRX clock to the DWMAC
block and PHY. Either (1) ETHCK_K generates 50 MHz clock on ETH_CLK
pad for the PHY and the same 50 MHz clock are fed back to ETHRX via
internal eth_clk_fb clock connection OR (2) ETH_CLK is not used at
all, MCO2 generates 50 MHz clock on MCO2 output pad for the PHY and
the same MCO2 clock are fed back into ETHRX via ETH_RX_CLK input pad
using external pad-to-pad connection.
Option (1) has two downsides. ETHCK_K is supplied directly from either
PLL3_Q or PLL4_P, hence the PLL output is limited to exactly 50 MHz and
since the same PLL output is also used to supply SDMMC blocks, the
performance of SD and eMMC access is affected. The second downside is
that using this option, the EMI of the SoM is higher.
Option (2) solves both of those problems, so implement it here. In this
case, the PLL4_P is no longer limited and can be operated faster, at
100 MHz, which improves SDMMC performance (read performance is improved
from ~41 MiB/s to ~57 MiB/s with dd if=/dev/mmcblk1 of=/dev/null bs=64M
count=1). The EMI interference also decreases.
Ported from Linux kernel commit 73ab99aad50cd ("ARM: dts: stm32: Switch DWMAC RMII clock to MCO2 on DHCOM")
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Marek Vasut [Thu, 6 Jul 2023 21:32:27 +0000 (23:32 +0200)]
ARM: stm32: Inhibit PDDS because CSTBYDIS is set
The PWR_MPUCR CSTBYDIS bit is set, therefore the CA cores can never
enter CStandby state and would always end up in CStop state. Clear
the PDDS bit, which indicates the CA cores can enter CStandby state
as it makes little sense to keep it set with CSTBYDIS also set.
This does however fix a problem too. When both PWR_MPUCR and PWR_MCUCR
PDDS bits are set, then the chip enters CStandby state even though the
PWR_MCUCR CSTBYDIS is set. Clearing the PWR_MPUCR PDDS prevents that
from happening.
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Patrick Delaunay [Fri, 23 Jun 2023 13:05:16 +0000 (15:05 +0200)]
clk: stm32mp1: remove error for disabled clock in stm32mp1_clk_get_parent
To disabled a clock in clock tree initialization for a mux of STM32MP15,
the selected clock source index is set with the latest possible index for
the number of bit used. Today this valid configuration cause a error
in U-Boot messages, for example with CLK_ETH_DISABLED, when this clock
is not needed for the used ETH PHY without crystal:
no parents defined for clk id 123
This patch change the level of this message to avoid this trace for
valid clock tree.
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Marek Vasut [Wed, 17 May 2023 22:02:39 +0000 (00:02 +0200)]
ARM: stm32: Power cycle Buck3 in reset on DHSOM
In case the DHSOM is in suspend state and either reset button is pushed
or IWDG2 triggers a watchdog reset, then DRAM initialization could fail
as follows:
Avoid this failure by not keeping any Buck regulators enabled during reset,
let the SoC and DRAMs power cycle fully. Since the change which keeps Buck3
VDD enabled during reset is ST specific, move this addition to ST specific
SPL board initialization so that it wouldn't affect the DHSOM .
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Tom Rini [Wed, 16 Aug 2023 01:49:34 +0000 (21:49 -0400)]
Merge branch '2023-08-15-add-SGMII-support-for-TI-j7200' into next
To quote the author:
This series adds support for SGMII mode to the CPSW driver to enable the
functionality on TI's J7200 SoC.
Supporting SGMII mode also requires changes to the WIZ driver which acts
as a wrapper for the SerDes used by the CPSW MAC to transmit data to the
Ethernet PHY daughtercard mounted on the I2C GPIO Expander 2 connector
on the J7200 EVM.
Powering on and resetting the Ethernet PHY requires MDIO support which
is added to the CPSW driver.
For supporting DMA transactions from the MAIN CPSW instance to the A72
Host on J7200 SoC, the corresponding PSI-L endpoint information is added
for the J721E SoC, which is applicable to J7200 SoC as well.
The SGMII daughtercard used for testing SGMII mode has TI's DP83869 PHY.
Thus, enable the config for DP83869 driver functionality. Also, enable
GPIO HOG config.
configs: j7200_evm_a72: Enable configs for SGMII support with MAIN CPSW0
The MAIN CPSW0 instance of CPSW Ethernet Switch on TI's J7200 SoC
supports SGMII mode. To enable support for utilizing the SGMII
daughtercard with TI's DP83869 PHY, enable the corresponding config.
Also, since the SGMII daughtercard is connected to the I2C GPIO
Expander 2 connector on the J7200 EVM, powering on the Ethernet PHY and
resetting it requires GPIO Hogging capability. Enable it as well.
projects / u-boot.git / log
