Martin Fuzzey [Wed, 13 Jan 2021 10:21:03 +0000 (11:21 +0100)]
w1: mxc: fix build
Now that header files no longer include common.h it must be included
first.
Otherwise the build fails with errors like
include/asm/arch/clock.h:43:1: error: unknown type name 'u32'
u32 imx_get_uartclk(void);
Fixes: c3dc39a2f85b ("arm: Don't include common.h in header files") Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group> Reviewed-by: Simon Glass <sjg@chromium.org>
Marc Ferland [Mon, 4 Jan 2021 15:41:57 +0000 (10:41 -0500)]
arm: dart6ul: enable DM_ETH for the dart6ul
This patch converts the dart6ul ethernet support to DM_ETH and cleans
up the legacy ethernet code. The clean up, more specifically:
* moves the fec2 node and pin definition to the carrier board DTS
since the phy associated with it is on the carrier board and not on
the SoM;
* add the reset pin associated to each phy;
* separate the ethernet, mdio and reset pins of each fec so that they
are easier to reference;
* add clock properties to the phy nodes since they are connected to the
50Mhz ENET[12]_TX_CLK clock of the SoC;
* remove CONFIG_BOARD_EARLY_INIT_F since the function is now empty.
Sean Anderson [Mon, 28 Dec 2020 19:58:30 +0000 (14:58 -0500)]
mx6ul(l)evk: Enable DM_ETH_PHY
This fixes eth0 not initializing properly. Both eth0 and eth1 use the
MDIO interface on eth1 to access their PHYs. However, without
DM_ETH_PHY, eth0 still tries to use its own MDIO interface to access its
phy. Before this patch, a boot log might contain lines like
Net:
Warning: ethernet@20b4000 using MAC address from ROM
eth1: ethernet@20b4000 [PRIME]Could not get PHY for FEC0: addr 2
After this patch they now look like
Net:
Warning: ethernet@20b4000 using MAC address from ROM
eth1: ethernet@20b4000 [PRIME]Get shared mii bus on ethernet@2188000
Warning: ethernet@2188000 using MAC address from ROM
, eth0: ethernet@2188000
As an alternative to DM_ETH_PHY, FEC_MXC_SHARE_MDIO could also have been
used to achieve the same effect.
Signed-off-by: Sean Anderson <sean.anderson@seco.com> Reviewed-by: Fabio Estevam <festevam@gmail.com>
Alice Guo [Fri, 18 Dec 2020 07:19:27 +0000 (15:19 +0800)]
board: imx8mp: add boot.cmd for distro boot on iMX8MP
Distro Boot requires a U-Boot-specific script named boot.scr or
boot.scr.uimg which contains boot commands to boot the system. The
boot.cmd is such a file. Use mkimage to generate boot.scr or
boot.scr.uimg from boot.cmd, and the command is:
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Distro Boot Script" -d boot.cmd boot.scr.uimg
The boot.cmd file is an example script and can be modified based on
needs. bootargs is set in this script and root uses the default value
"/dev/mmcblk1p2 rootwait rw" which can be changed by overriding mmcroot.
Alice Guo [Fri, 18 Dec 2020 07:19:26 +0000 (15:19 +0800)]
imx8mp: configs: add support for distro boot commands
Supported boot device types in iMX8MP: MMC.
CONFIG_CMD_PART is added for command part and CONFIG_CMD_FS_GENERIC is
for command fstype.
scriptaddr is the location in RAM where boot.scr.uimg/boot.scr will be
loaded to prior to execution. kernel_addr_r is the location in RAM where
the kernel will be loaded to. Delete unnecessary environment variables
because "run distro_bootcmd" is set to be the default boot mode.
On the iMX8MP platform I used, "mmc1" represents SD card and "mmc2"
represents eMMC.
Alice Guo [Fri, 18 Dec 2020 06:50:08 +0000 (14:50 +0800)]
board: imx8mm: add boot.cmd for distro boot on iMX8MM
Distro Boot requires a U-Boot-specific script named boot.scr or
boot.scr.uimg which contains boot commands to boot the system. The
boot.cmd is such a file. Use mkimage to generate boot.scr or
boot.scr.uimg from boot.cmd, and the command is:
mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "Distro Boot Script" -d boot.cmd boot.scr.uimg
The boot.cmd file is an example script and can be modified based on
needs. bootargs is set in this script and root uses the default value "
/dev/mmcblk1p2 rootwait rw" which can be changed by overriding mmcroot.
Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Alice Guo <alice.guo@nxp.com>
Peng Fan [Thu, 17 May 2018 07:15:59 +0000 (15:15 +0800)]
imx8m: add QSPI boot dev
When boot type could not be detected from rom sw info,
read sbmr1 to detect, here we only use it to detect FLEXSPI
boot, because ROM not update it in rom sw info.
Ye Li [Mon, 3 Aug 2020 05:43:45 +0000 (22:43 -0700)]
imx: nandbcb: Fix resource leak in read_fcb
Fix Coverity Issue 9006657. In read_fcb, leak of memory to system
resource "fcb_raw_page". Adjust the sequence to check the mtd bad
block prior than allocation of "fcb_raw_page", also check the NULL
return of allocation.
Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Mon, 3 Aug 2020 04:11:06 +0000 (21:11 -0700)]
imx: nandbcb: Fix resource leak
Fix Coverity Issue 9006655. In write_fcb, leak of memory to resource
"fcb_raw_page". Since we have initialized the "ret" to 0, should return
the value of ret.
Signed-off-by: Ye Li <ye.li@nxp.com> Reviewed-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Ye Li [Wed, 30 Sep 2020 04:55:32 +0000 (21:55 -0700)]
imx: ddr: imx8m: Move selfref_en after DDR scrub
When doing DDR scrub, the DDR may enter into self refresh if the
selfref_en is enabled before DDR scrub. This will cause scrub
can't complete that SBRSTAT.scrub_done won't be set.
Since the selfref_en can be programmed during the course of
normal operation, move it after DDR scrub
Signed-off-by: Ye Li <ye.li@nxp.com> Acked-by: Peng Fan <peng.fan@nxp.com> Signed-off-by: Peng Fan <peng.fan@nxp.com>
Tom Rini [Thu, 21 Jan 2021 12:39:47 +0000 (07:39 -0500)]
Merge tag 'u-boot-rockchip-20210121' of https://gitlab.denx.de/u-boot/custodians/u-boot-rockchip
- New board: rk3328 NanoPi R2S board;
- Fix init voltage for some rk3399 boards;
- enable rng for rk3399 by default;
- set default to SPI bus 1 for SPI-flash for some board;
- add dwc PCIe controller driver on rockchip platform;
Peter Robinson [Wed, 16 Dec 2020 15:48:42 +0000 (15:48 +0000)]
arm: dts: rockchip: rk3399: enable rng at the SoC level
The rng is embedded in the SoC so enable it in the device tree
universally, the use of it can be controlled by enabling/disabling
at the device config level.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Cc: Kever Yang <kever.yang@rock-chips.com> Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
Hugh Cole-Baker [Sun, 22 Nov 2020 13:03:46 +0000 (13:03 +0000)]
rockchip: puma-haikou: default to SPI bus 1 for SPI-flash
SPI flash on this machine is located on bus 1, default to using bus 1
for SPI flash and stop aliasing it to bus 0. Formerly the alias spi1
pointed to &spi5, use an alias spi5 for this instead.
Hugh Cole-Baker [Sun, 22 Nov 2020 13:03:45 +0000 (13:03 +0000)]
rockchip: rk3399-roc-pc: default to SPI bus 1 for SPI-flash
SPI flash on this board is located on bus 1, default to using bus 1 for
SPI flash on both rk3399-roc-pc and -mezzanine, and stop aliasing it to
bus 0.
Signed-off-by: Hugh Cole-Baker <sigmaris@gmail.com> Suggested-by: Simon Glass <sjg@chromium.org> Fixes: c4cea2bb ("rockchip: Enable building a SPI ROM image on bob") Reviewed-by: Kever Yang<kever.yang@rock-chips.com>
Campbell Suter [Mon, 23 Nov 2020 02:40:03 +0000 (15:40 +1300)]
Fix squashfs failing to load sparse files
SquashFS supports sprase blocks in files - that is, if a given block is
composed only of zeros, it's not written to the output file to save
space and it's on-disk length field is set to zero to indicate that.
Previously the squashfs driver did not recognise that, and would attempt
to read and decompress a zero-sized block, which obviously failed.
The following command may be used to create a file for testing:
Qu Wenruo [Sat, 31 Oct 2020 01:07:50 +0000 (09:07 +0800)]
fs: btrfs: volumes: prevent overflow for multiplying
In __btrfs_map_block() we do a int * int and assign it to u64.
This is not safe as the result (int * int) is still evaluated as (int)
thus it can overflow.
Convert one of the multiplier to u64 to prevent such problem.
In real world, this should not cause problem as we have device number
limit thus it won't go beyond 4G for a single stripe.
But it's harder to teach coverity about all these hidden limits, so just
fix the possible overflow.
Tom Rini [Wed, 20 Jan 2021 15:49:23 +0000 (10:49 -0500)]
Merge tag 'efi-2021-04-rc1-2' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi
Pull request for UEFI sub-system for efi-2021-04-rc1-2
* Provide a test tool for initial RAM disk provided via load file2 protocol.
* Make more items configurable to reduce code size:
* Boot manager
* EFI_DT_FIXUP_PROTOCOL
* EFI_DEVICE_PATH_UTILITIES_PROTOCOL
* Bug fixes
* avoid EFI runtime symbols in global symbol table
Michal Simek [Wed, 13 Jan 2021 09:25:50 +0000 (10:25 +0100)]
env: Remove all dependencies for SYS_REDUNDAND_ENVIRONMENT
CONFIG_SYS_REDUNDAND_ENVIRONMENT is changing in env_internal.h how u-boot
works with variables. struct environment_s has one byte flags property
which also affects ENV_SIZE macro.
I have reached the case where CONFIG_ENV_IS_NOWHERE is default setup
but custom scripts can be designed in a way that u-boot is asked to
import/export variables from/to file which can be in certain format.
That's why also for this configuration make sense to enable
CONFIG_SYS_REDUNDAND_ENVIRONMENT because it depends on environment file
format.
The patch is removing dependency on this configuration to support selecting
environment file format without any specific dependency where variables are
stored.
Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Michal Simek [Mon, 4 Jan 2021 10:07:28 +0000 (11:07 +0100)]
xilinx: common: Do not touch CONFIG_XILINX_OF_BOARD_DTB_ADDR in SPL
This hook is used in full U-Boot that's why there is no reason to touch
this location from SPL. The hook was introduced for QEMU usage but none is
really running SPL on QEMU that's why it shouldn't break any usecase.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Michal Simek [Mon, 11 Jan 2021 12:46:58 +0000 (13:46 +0100)]
xilinx: zynqmp: Save bootseq number for SD/EMMC boot modes
For systems which has both sdhci controllers enable it is worth to export
bootseq number for variables. Then the variable can be used in custom
scripts to tune logic for OS.
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Ilias Apalodimas [Sat, 16 Jan 2021 15:28:04 +0000 (17:28 +0200)]
efi_loader: Avoid emitting efi_var_buf to .GOT
Atish reports that on RISC-V, accessing the EFI variables causes
a kernel panic. An objdump of the file verifies that, since the
global pointer for efi_var_buf ends up in .GOT section which is
not mapped in virtual address space for Linux.
In EFI 1.10 a version of the Unicode collation protocol using ISO 639-2
language codes existed. This protocol is not part of the UEFI specification
any longer. It was however required to run the UEFI Self Certification Test
(SCT) II, version 2.6, 2017. So we implemented it for the sole purpose of
running the SCT.
As the SCT does not need the protocol anymore it is time for removal.
Signed-off-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
David Wu [Fri, 8 Jan 2021 02:53:05 +0000 (10:53 +0800)]
net: eth-uclass: Change uclass driver name to ethernet
dev_read_alias_seq() used uc_drv->name compared to alias
stem string, Ethernet's alias stem uses "ethernet", which
does not match the eth-uclass driver name "eth", can not
get the correct index of ethernet alias namer. So it seems
change uclass driver name to match the alias stem is a more
reasonable way.
Signed-off-by: David Wu <david.wu@rock-chips.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Marek Vasut [Thu, 7 Jan 2021 10:12:16 +0000 (11:12 +0100)]
net: dwc_eth_qos: Pad descriptors to cacheline size
The DWMAC4 IP has the possibility to skip up to 7 AXI bus width size words
after the descriptor. Use this to pad the descriptors to cacheline size and
remove the need for noncached memory altogether. Moreover, this lets Tegra
use the generic cache flush / invalidate operations.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Patrice Chotard <patrice.chotard@st.com> Cc: Patrick Delaunay <patrick.delaunay@st.com> Cc: Ramon Fried <rfried.dev@gmail.com> Cc: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Patrice Chotard <patrice.chotard@foss.st.com>
Marek Vasut [Wed, 6 Jan 2021 14:16:01 +0000 (15:16 +0100)]
net: ks8851: Reset internal RXFC count on bad packet
A sporadic condition occurs when the "bad packet" error is triggered
repeatedly, which results in "bad packet" messages scrolling on the
console during transfer. To avoid triggering this, reset the internal
RXFC count on the first occurance of the "bad packet", which forces
the code to re-read the RX packet count from the MAC, and prevents
any additional "bad packet" messages if there are no more packets in
the MAC. Also print better debug information if this condition occurs.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Eugen Hristev <eugen.hristev@microchip.com> Cc: Joe Hershberger <joe.hershberger@ni.com> Cc: Tom Rini <trini@konsulko.com>
Harm Berntsen [Fri, 27 Nov 2020 21:45:56 +0000 (21:45 +0000)]
net: tftp: Fix incorrect tftp_next_ack on no OACK
When the tftp server did not send any OACK, the tftp_next_ack variable
was not set to the correct value . As the server was transmitting
blocks we generated a lot of 'Received unexpected block: $n, expected
$n+1' error messages. Depending on the timeout setting the transfer
could still complete though.
Signed-off-by: Harm Berntsen <harm.berntsen@nedap.com> CC: Ramon Fried <rfried.dev@gmail.com> Reviewed-By: Ramon Fried <rfried.dev@gmail.com>
David Rivshin [Sun, 15 Nov 2020 03:12:47 +0000 (22:12 -0500)]
net: Do not respond to ICMP_ECHO_REQUEST if we do not have an IP address
While doing DHCP the interface IP is set to 0.0.0.0. This causes the
check in net.c on dst_ip to be effectively skipped, and all IP datagrams
are accepted up the IP stack. In the case of an ICMP_ECHO_REQUEST for the
matching MAC address (regardless of destination IP), the result is that
an ICMP_ECHO_REPLY is sent. The source address of the ICMP_ECHO_REPLY is
0.0.0.0, which is an illegal source address.
This can happen in common practice with the following sequence:
DHCP (U-Boot or OS) acquires IP address 10.0.0.1
System reboots
U-Boot starts DHCP and send DHCP DISCOVER
DHCP server decides to OFFER 10.0.0.1 again
(perhaps because of existing lease or manual configuration)
DHCP server tries to PING 10.0.0.1 to see if anyone is squatting on it
DHCP server still has our MAC address in its ARP table for 10.0.0.1
U-Boot receives PING, and responds with an illegal source address
This may further result in a the DHCP server seeing the response as
confirmation that someone is squatting on 10.0.0.1, and picking a
new IP address from the pool to try again
Signed-off-by: David Rivshin <drivshin@allworx.com>
Ian Ray [Wed, 4 Nov 2020 16:26:01 +0000 (17:26 +0100)]
net: e1000: implement eth_write_hwaddr for DM_ETH
Implement programming MAC address to the hardware also for device model
configuration.
Fixes: b565b18a294f ("board: ge: bx50v3: Enable DM for PCI and ethernet") Signed-off-by: Ian Ray <ian.ray@ge.com> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
net: eth-uclass: avoid running start() twice without stop()
Running the start() handler twice without a stop() inbetween completely
breaks communication for some ethernet drivers like fec_mxc.
eth_halt() is called before each eth_init(). Due to the switch to
eth_is_active() in commit 68acb51f442f ("net: Only call halt on a driver
that has been init'ed"), this is not sufficient anymore when netconsole
is active: eth_init_state_only()/eth_halt_state_only() manipulate the
state check that is performed by eth_is_active() without actually
calling into the driver.
The issue can be triggered by starting a network operation (e.g. ping or
tftp) while netconsole is active.
Add an additional "running" flag that reflects the actual state of the
driver and use it to ensure that eth_halt() actually stops the device as
it is supposed to.
Fixes: 68acb51f442f ("net: Only call halt on a driver that has been init'ed") Signed-off-by: Matthias Schiffer <matthias.schiffer@ew.tq-group.com>
Weijie Gao [Tue, 12 Jan 2021 05:44:02 +0000 (13:44 +0800)]
timer: mtk_timer: initialize the timer before use
The timer being used by this driver may have already been used by first
stage bootloader (e.g. ATF/preloader), and it's settings may differ from
what this driver is going to use.
This may cause issues, such as inaccurate timer frequency due to
incorrect clock divider.
This patch adds the initialization code to avoid them.
Tim Harvey [Mon, 21 Dec 2020 16:19:39 +0000 (08:19 -0800)]
power: pmic: add driver for Monolithic Power mp5416
This adds basic register access and child regulator binding
for the Monolithic MP5416 Power Management IC which integrates
four DC/DC switching converters and five LDO regulators.
Chia-Wei, Wang [Mon, 14 Dec 2020 05:54:27 +0000 (13:54 +0800)]
ARM: dts: aspeed: Add AST2600 SoC support
AST2600 is the 7th generation of Aspeed SoC designated for
Interated Remote Management Processor.
AST2600 has significant performance improvement by integrating
1.2GHz dual-core ARM Cortex A7 (r0p5) CPU with FPU. Most of the
controllers are also improved with more features and better
performance than preceding AST24xx/AST25xx.
Signed-off-by: Chia-Wei, Wang <chiawei_wang@aspeedtech.com> Reviewed-by: Ryan Chen <ryan_chen@aspeedtech.com>
projects / u-boot.git / log
![3 years agoimx: imx8mn/p: drop CONFIG_SYS_[I,D]CACHE_OFF](/img/sics.gif?p=u-boot.git;a=commit;h=f89eb9be09cf35b82b9da7bf178d4f6edaa59270){kind=link}
