Wolfgang Denk [Sun, 23 Oct 2011 15:00:47 +0000 (17:00 +0200)]
MPC85xx: remove broken "mpq101" board
The board stopped building some time ago, and the board maintainer
agrtees to drop it - see
http://article.gmane.org/gmane.comp.boot-loaders.u-boot/112674
Signed-off-by: Wolfgang Denk <wd@denx.de> Cc: Alex Dubov <oakad@yahoo.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Kumar Gala <galak@kernel.crashing.org>
Michal Simek [Tue, 18 Oct 2011 00:22:10 +0000 (00:22 +0000)]
serial: uartlite: Fix compilation warnings
Do not setup userial_ports array as const because
in uartlite_serial_putc is out_be32 which can't write
to tx_fifo if is const.
Warning log:
serial_xuartlite.c: In function 'uartlite_serial_putc':
serial_xuartlite.c:60: warning: initialization discards qualifiers from pointer target type
serial_xuartlite.c: In function 'uartlite_serial_getc':
serial_xuartlite.c:78: warning: initialization discards qualifiers from pointer target type
serial_xuartlite.c: In function 'uartlite_serial_tstc':
serial_xuartlite.c:87: warning: initialization discards qualifiers from pointer target type
Remove MK_STR from places that consume CONFIG_BOOTFILE to force all definitions to be string literals.
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
Remove MK_STR from places that consume CONFIG_ROOTPATH to force all definitions to be string literals.
Signed-off-by: Joe Hershberger <joe.hershberger@ni.com> Cc: Joe Hershberger <joe.hershberger@gmail.com> Cc: Wolfgang Denk <wd@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org>
Mike Frysinger [Wed, 12 Oct 2011 19:48:00 +0000 (19:48 +0000)]
autoconf.mk.dep: use target cflags, not host
The current autoconf.mk.dep rule uses the host cflags when executing the
target compiler (which includes target header files). We don't want to
mix the target compiler and host compiler flags, so change it to CFLAGS.
Otherwise we get things like -pedantic which the U-Boot source code does
not build with.
Seems people fixed their files to use libfoo.o, but didn't actually
update the creation targets to use $(cmd_link_o_target). Update the
rest of the Makefile's found with grep.
Signed-off-by: Mike Frysinger <vapier@gentoo.org> Tested-by: Simon Glass <sjg@chromium.org>
Stephen Warren [Tue, 18 Oct 2011 11:11:49 +0000 (11:11 +0000)]
checkpatch whitespace cleanups
This avoids the following checkpatch warning in later patches:
ERROR: "(foo*)" should be "(foo *)"
ERROR: space required before the open brace '{'
ERROR: space prohibited before that close parenthesis ')'
ERROR: spaces required around that '||' (ctx:WxV)
WARNING: space prohibited between function name and open parenthesis '('
WARNING: line over 80 characters
This fixes all the white-space warnings/errors in my subsequent patch,
and within this current patch. A number of other checkpatch warnings
and errors are still present in this patch itself, but are beyond simple
whitespace fixes, so are not solved by this patch.
v2: New patch
Signed-off-by: Stephen Warren <swarren@nvidia.com> Tested-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org>
Tang Yuantian [Fri, 7 Oct 2011 19:26:58 +0000 (19:26 +0000)]
drivers: add the support for Silicon Image SATA controller
Add the Silicon Image series PCI Express to
Serial ATA controller support, including Sil3132,
Sil3131 and Sil3124.
The SATA controller can be used to load kernel.
The features list:
- Supports 1-lane 2.5 Gbit/s PCI Express
- Supports one/two/four independent Serial ATA channels
- Supports Serial ATA Generation 2 transfer rate of 3.0 Gbit/s
- Supports LBA28 and LBA48
Signed-off-by: Tang Yuantian <b29983@freescale.com> Signed-off-by: Aaron Williams <Aaron.Williams@cavium.com> Tested-by: Lan Chunhe <b25806@freescale.com>
Macpaul Lin [Tue, 11 Oct 2011 22:33:18 +0000 (22:33 +0000)]
nds32/ag101: cpu and init funcs of SoC ag101
SoC ag101 is the first chip using NDS32 N1213 cpu core.
Add header file of device offset support for SoC ag101.
Add main function of SoC ag101 based on NDS32 n1213 core.
Add lowlevel_init.S and other periphal related code.
This version of lowlevel_init.S also replace hardcode value
by MARCO defines from the GPL version andesboot for better
code quality.
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Macpaul Lin [Wed, 19 Oct 2011 20:41:05 +0000 (20:41 +0000)]
nds32/core N1213: NDS32 N12 core family N1213
Add N1213 cpu core (N12 Core family) support for NDS32 arch.
This patch includes start.S for the initialize procedure of N1213.
Start procedure:
start.S will start up the N1213 CPU core at first,
then jump to SoC dependent "lowlevel_init.S" and
"watchdog.S" to configure peripheral devices.
Signed-off-by: Macpaul Lin <macpaul@andestech.com> Signed-off-by: Greentime Hu <greentime@andestech.com>
Timur Tabi [Wed, 5 Oct 2011 22:08:07 +0000 (17:08 -0500)]
cmd_bdinfo: replace print_str() with print_mhz()
The print_str() helper function for cmd_bdinfo can print any string, but it
is only used to print MHz values. Replace it with print_mhz() that takes
a number and converts it to a string internally.
Linus Walleij [Sun, 2 Oct 2011 11:52:52 +0000 (11:52 +0000)]
serial: pl01x: drain PL01x FIFO before baudrate change
Not draining the FIFO and waiting for the UART to be non-busy
before changing baudrate results in crap characters on the
console, so let's wait for the FIFO to drain and the last
character to be clocked out before we do that.
Che-liang Chiou [Mon, 17 Oct 2011 21:04:15 +0000 (21:04 +0000)]
examples: api: allow build with private libgcc
The examples/api is not configured with USE_PRIVATE_LIBGCC. This makes
building examples/api break on certain boards that do not/cannot use the
public libgcc.
Nevertheless, this patch has to also touch the top-level Makefile to fix
this problem because the current top-level Makefile does not specify
libgcc as a prerequisite of examples/api, and explicitly builds
examples/api _before_ libgcc.
For testing this patch, I added the following to configs/seaboard.h and
ran demo.bin on a Seaboard.
The code had two paths depending on whether the card was to be
accessed from plain memory or the IO region. However the error
path checks whether IO region was obtained - twice. Fix up the
error path according to the probable intention.
Macpaul Lin [Tue, 20 Sep 2011 19:54:32 +0000 (19:54 +0000)]
ftgmac100: reset fix when supports wake on lan
This patch move the reset function from initialization to
driver register procedure.
Some embedded system supports wake on lan nowadays. On this kind of system,
the ftgmac100 will be still supplied power after the system has been
shut-down by Linux. Hence the register used by linux won't be clear
when the system has been powered-off.
The origin ftgmac100 driver in u-boot will only register
driver and functions to network stack and won't reset the ftgmac100
hardware if the network won't be used during boot-up.
This will lead ftgmac100 continue receiving packets and then might corrupt
linux kernel when booting up.
So we reorder the hardware reset function earlier to force the hardware
to be reset whether it will be used or not.
Signed-off-by: Macpaul Lin <macpaul@andestech.com>
Andreas Huber [Tue, 13 Sep 2011 23:06:11 +0000 (23:06 +0000)]
km/common: fix ramfs development target
Calucations of PRAM needs to take into account the 'rootfssize'.
Memory available to the linux kernel 'mem=' is in all cases set to the total
memory size minus the pram size.
Signed-off-by: Andreas Huber <andreas.huber@keymile.com> Signed-off-by: Holger Brunck <holger.brunck@keymile.com>
cc: Wolfgang Denk <wd@denx.de>
Luka Perkov [Mon, 5 Sep 2011 21:40:13 +0000 (23:40 +0200)]
fix compile warning for env tools
Patch fixes this issue:
fw_env.c: In function ‘fw_setenv’:
fw_env.c:492:5: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 3 has type ‘size_t’ [-Wformat]
fw_env.c: In function ‘flash_write_buf’:
fw_env.c:806:6: warning: format ‘%u’ expects argument of type ‘unsigned int’, but argument 3 has type ‘size_t’ [-Wformat]
Signed-off-by: Luka Perkov <lists@lukaperkov.net> Acked-by: Mike Frysinger <vapier@gentoo.org>
Wolfgang Denk [Fri, 21 Oct 2011 21:48:46 +0000 (23:48 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-mpc85xx
* 'master' of git://git.denx.de/u-boot-mpc85xx:
mpc85xx: Add inline GPIO acessor functions
powerpc/85xx: wait for alignment before resetting SERDES RX lanes (SERDES9)
powerpc/85xx: Fix P2020DS booting
powerpc/85xx: Update USB device tree status based on pin settings
fdt: Add new fdt_set_node_status & fdt_set_status_by_alias helpers
powerpc/85xx: Add support for RMan LIODN initialization
powerpc/85xx: Update device tree handling for SRIO
powerpc/85xx: Update setting of SRIO LIODNs
fm: Don't allow disabling of FM1-DTSEC1
fm-eth: Don't mark the MAC we use for MDIO as disabled in device tree
Wolfgang Denk [Fri, 21 Oct 2011 21:36:40 +0000 (23:36 +0200)]
Merge branch 'master' of git://git.denx.de/u-boot-coldfire
* 'master' of git://git.denx.de/u-boot-coldfire:
ColdFire: Clean Makefile _config rules
ColdFire: Move boards with simple _config rules to boards.cfg
ColdFire: Fix compilation with CONFIG_SYS_DRAMSZ1 defined
ColdFire: Merge differentiated linking files into a sigle one by board
ColdFire: Add $(obj) before cpu lib to correct build
ColdFire: Cleanup lds files for multiple defined symbols
Wolfgang Denk [Fri, 21 Oct 2011 21:35:12 +0000 (23:35 +0200)]
Merge branch 'master' of /home/wd/git/u-boot/master
* 'master' of /home/wd/git/u-boot/master:
cosmetic: Fixup fixup_silent_linux() for checkpatch
Correct dependency rule to fix SPL build
Move timestamp and version files into 'generated' subdir
sandbox: Makefile changes to build sandbox architecture
Add generic gpio.h in asm-generic
Adjust dependency rules to permit per-file flags
sandbox: Use uintptr_t for 32/64-bit compatibility
sandbox: Add basic config file
sandbox: Add serial uart
sandbox: Add main program
sandbox: Add OS dependent layer
sandbox: Force command sections to be 4-byte aligned
sandbox: Disable standalone/API support
sandbox: Disable built-in malloc
sandbox: Add bootm support
sandbox: Add board info for architecture
sandbox: Add sandbox board
sandbox: Add architecture lib files
sandbox: Add cpu files
sandbox: Add compiler defines to support a 64-bit x86_64 platform
sandbox: Add architecture image support
Fix use of int as pointer in image.c
sandbox: Add architecture header files
arm: ca9x4_ct_vxp: enable PXE BOOTP options support
arm: ca9x4_ct_vxp: enable pxe command support
Convert ca9x4_ct_vxp to standard env variables
net: bootp: add PXE/RFC 4578 DHCP options support
Add pxe command
lib: add uuid_str_to_bin for use with bootp and PXE uuid
README: document standard image variables
Replace space and tab checks with isblank
cosmetic: remove unneeded curly braces
Add isblank
common: add run_command2 for running simple or hush commands
common, menu: use abortboot for menu timeout
Add generic, reusable menu code
DM9000:Add a byte swap macro for dm9000 io operation.
kw_gpio: fix error in kw_gpio_direction_input
Blackfin: bfin_spi: fix build error when DEBUG is defined
Blackfin: define CONFIG_SYS_CACHELINE_SIZE
video: Moving mx3fb.c to CONFIG_VIDEO
mx31: make HSP clock for mx3fb driver available
MX5: Make IPU display output and pixel format configurable
VIDEO: MX5: export pix format
VIDEO: MX5: Switch MX5 to CONFIG_VIDEO
video: update the Freescale DIU driver to use linux/fb.h
powerpc: cpm2 boards: update fcc register logic
Kyle Moffett [Wed, 19 Oct 2011 18:58:15 +0000 (14:58 -0400)]
mpc85xx: Add inline GPIO acessor functions
To ease the implementation of other MPC85xx board ports, several common
GPIO helpers are added to <asm/mpc85xx_gpio.h>.
Since each of these compiles to no more than 4-5 instructions it would
be very inefficient to call them out of line, therefore we put them
entirely in the header file.
The HWW-1U-1A board port which these were written for strongly prefers
to set multiple GPIOs as a single batch operation, so the API is
designed around that basis.
To assist other board ports, a small set of wrappers are used which
provides a standard gpio_request() interface around the MPC85xx-specific
functions. This can be enabled with CONFIG_MPC85XX_GENERIC_GPIO
Signed-off-by: Kyle Moffett <Kyle.D.Moffett@boeing.com> Cc: Andy Fleming <afleming@gmail.com> Cc: Peter Tyser <ptyser@xes-inc.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Simon Glass [Tue, 18 Oct 2011 05:50:42 +0000 (05:50 +0000)]
Correct dependency rule to fix SPL build
Commit 4750884 introduced a change in the dependency generation which
breaks SPL, because the source files being built are not initially present
and are symlinked as part of the build.
The .depend file must depend not only on the files in the DEPS list but
also on the sources which did not contribute files to the DEPS list, since
these sources will otherwise not get a dependency and will not be built.
Signed-off-by: Simon Glass <sjg@chromium.org> Tested-by: Wolfgang Denk <wd@denx.de>
stany MARCEL [Fri, 14 Oct 2011 04:38:04 +0000 (04:38 +0000)]
ColdFire: Merge differentiated linking files into a sigle one by board
The spa, stm, int, 32 and 16 linking files are identical so there is
no need to differentiate them. A single lds file is now used, and
_config rule are simplified.
Signed-off-by: Stany MARCEL <stany.marcel@novasys-ingenierie.com>
Shengzhou Liu [Fri, 14 Oct 2011 08:26:06 +0000 (16:26 +0800)]
powerpc/85xx: Update USB device tree status based on pin settings
For P3060 and P4080, USB pins are multiplexed with other functions.
Update the device tree status for USB ports based on setting of
RCW[EC1] & RCW[EC2] which describe if pins are muxed to usb.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Shengzhou Liu [Fri, 14 Oct 2011 08:26:05 +0000 (16:26 +0800)]
fdt: Add new fdt_set_node_status & fdt_set_status_by_alias helpers
Add common function fdt_set_node_status() to assist in various locations
that we set a nodes status. This function utilizes the status values
that are part of the EPAPR spec (on power.org).
fdt_set_status_by_alias() is based on fdt_set_node_status() but uses an
alias string to identify the node to update.
We also add some shortcut functions to help the common cases of setting
"okay" and "disabled":
Finally, we fixup the corenet_ds ethernet code which previously had
a function by the same name that can be replaced with the new helpers.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Gerald Van Baren <vanbaren@cideas.com>
Kumar Gala [Fri, 14 Oct 2011 18:28:52 +0000 (13:28 -0500)]
powerpc/85xx: Add support for RMan LIODN initialization
This patch is intended to initialize RMan LIODN related registers on
P2041, P304S and P5020 SocS. It also adds the "rman@0" child node to
qman-portal nodes, adds "fsl,liodn" property to RMan inbound block nodes.
Signed-off-by: Minghuan Lian <Minghuan.Lian@freescale.com> Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Fri, 14 Oct 2011 05:01:23 +0000 (00:01 -0500)]
powerpc/85xx: Update setting of SRIO LIODNs
Properly set the LIODN values associated with SRIO controller. On
P4080/P3060 we have an LIODN per port and one for the RMU. On
P2041/P3041/P5020 we have 2 LIODNs per port.
Update the tables for all of these devices to properly handle both
styles.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Fri, 14 Oct 2011 08:17:56 +0000 (03:17 -0500)]
fm: Don't allow disabling of FM1-DTSEC1
The MDIO controller to talk to external PHYs is on FM1-DTSEC1 so don't
allow disabling. If we disable it we end up powering the block down in
the SoC and thus can't communicate to any external PHYs.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Kumar Gala [Thu, 13 Oct 2011 19:55:59 +0000 (14:55 -0500)]
fm-eth: Don't mark the MAC we use for MDIO as disabled in device tree
FM1-DTSEC1's MAC was being marked as disabled if the port was not
configured based on the SoC configuration. However we utilize the MAC
interface for MDIO and thus should NOT mark it disabled.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Simon Glass [Mon, 10 Oct 2011 08:55:19 +0000 (08:55 +0000)]
Move timestamp and version files into 'generated' subdir
There is a rather subtle build problem where the build time stamp is not
updated for out-of-tree builds if there exists an in-tree build which
has a valid timestamp file. So if you do an in-tree build, then an
out-of-tree build your timestamp will not change.
The correct timestamp_autogenerated.h lives in the object tree, but it
is not always found there. The source still lives in the source tree and
when compiling version.h, it includes timestamp_autogenerated.h. Since
the current directory is always searched first, this will come from the
source tree rather than the object tree if it exists there. This affects
dependency generation also, which means that common/cmd_version.o will not
even be rebuilt if you have ever done an in-tree build.
A similar problem exists with the version file.
This change moves both files into the 'generated' subdir, which is already
used for asm-offsets.h. Then timestamp.h and version.h are updated to
include the files from there.
There are other places where these generated files are included, but I
cannot see why these don't just use the timestamp.h and version.h headers.
So this change also tidies that up.
I have tested this with in- and out-of-tree builds, but not SPL. I have
looked at various other options for fixing this, including sed on the dep
files, -I- and -include flags to gcc, but I don't think they can be made
to work. Comments welcome.
Signed-off-by: Simon Glass <sjg@chromium.org> Acked-by: Mike Frysinger <vapier@gentoo.org>
Simon Glass [Mon, 3 Oct 2011 19:26:50 +0000 (19:26 +0000)]
sandbox: Makefile changes to build sandbox architecture
At this point U-Boot will build and run on x86 under Linux.
The idea is to define a new architecture called 'sandbox', alongside ARM
and x86. This runs natively on Linux to suit the host machine. All
hardware access is either omitted or emulated.
The purpose of this system is to test the bulk of the non-hardware-specific
U-Boot code. We can mock the SPI flash, GPIOs, UART and keyboard, then test
that U-Boot behaves as we wish.
Simon Glass [Fri, 7 Oct 2011 13:53:49 +0000 (13:53 +0000)]
Adjust dependency rules to permit per-file flags
The dependency rules are currently done in a shell 'for' loop. This does not
permit Makefile variables to adjust preprocessor flags as is done with normal
compile flags, using the CFLAGS_path/file.o syntax.
This change moves the dependency generation into the Makefile itself, and
permits a CPPFLAGS_path/file.o to adjust preprocessor flags on a file or
directory basis.
The CPPFLAGS_... variable is also folded into CFLAGS during the build.
Simon Glass [Mon, 3 Oct 2011 19:26:46 +0000 (19:26 +0000)]
sandbox: Add serial uart
This uart simply writes to stdout and reads from stdin. We might imagine
instead buffering the data so that a test interface can check output and
inject input.
Simon Glass [Sat, 17 Sep 2011 06:48:51 +0000 (06:48 +0000)]
sandbox: Force command sections to be 4-byte aligned
By default sections are 16-byte aligned on some architectures, but the
command name structure (struct cmd_tbl_s) does not have padding to
16 bytes. This reduces the alignment to 4-bytes so that the command
table can be accessed correctly on any architecture.
Jason Hobbs [Wed, 31 Aug 2011 15:37:30 +0000 (10:37 -0500)]
Add pxe command
Add pxe command, which is intended to mimic PXELINUX functionality.
'pxe get' uses tftp to retrieve a file based on UUID, MAC address or IP
address. 'pxe boot' interprets the contents of PXELINUX config like file
to boot using a specific initrd, kernel and kernel command line.
This patch also adds a README.pxe file - see it for more details on the
pxe command.
Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
Jason Hobbs [Tue, 23 Aug 2011 11:06:52 +0000 (11:06 +0000)]
Add isblank
Existing ctype checks are implemented using a 256 byte lookup table,
allowing each character to be in any of 8 character classes. Since there
are 8 existing character classes without the blank class, I implemented
isblank without using the lookup table. Since there are only two blank
characters - tab and space - this is a more reasonable approach than
doubling the size of the lookup table to accommodate one more class.
Signed-off-by: Jason Hobbs <jason.hobbs@calxeda.com>
Jason Jin [Thu, 25 Aug 2011 07:46:43 +0000 (15:46 +0800)]
DM9000:Add a byte swap macro for dm9000 io operation.
commit a45dde2293c816138e53c26eca6fd0322583f9a6 changed the dm9000
direct register access to standard IO. This should work
on the ColdFire platform as there are corresponding macros for
the LE devices. But the hardware settings on some ColdFire boards had
swapped the byte order which make the original macros such as out_le16
cannot work. To avoid changing the common io access code on ColdFire
platform, the DM9000_BYTE_SWAPPED define was added to make the dm9000 use
__raw* IO access on some ColdFire boards.
Signed-off-by: Jason Jin <Jason.jin@freescale.com>
Helmut Raiger [Wed, 12 Oct 2011 23:16:29 +0000 (23:16 +0000)]
video: Moving mx3fb.c to CONFIG_VIDEO
mx3fb.c was based on CONFIG_LCD and is moved by this patch to
CONFIG_VIDEO, which has greater freedom in selecting videomodes
even at runtime.
This renders the accumulating list of display defines
(CONFIG_DISPLAY_VBEST..., CONFIG_DISPLAY_C057...) obsolete as
these may be setup through env variables:
This commit also fixes the board config files for qong and
imx31_phycore boards as needed. The videomode settings of
previously supported displays are added to CONFIG_EXTRA_ENV_SETTINGS
now. CONFIG_SYS_MALLOC_LEN for imx31_phycore board is increased
to make the frame buffer allocation working with the changed
driver.
Helmut Raiger [Wed, 12 Oct 2011 21:08:30 +0000 (23:08 +0200)]
mx31: make HSP clock for mx3fb driver available
This additionally updates mx31/generic.c by
- replacing __REG() macro accesses with readl() and writel()
- providing macros for PDR0 and PLL bit accesses
Signed-off-by: Helmut Raiger <helmut.raiger@hale.at> Acked-by: Marek Vasut <marek.vasut@gmail.com> Cc: Stefano Babic <sbabic@denx.de> Acked-by: Stefano Babic <sbabic@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de>
The framebuffer driver for MX5 is based on CONFIG_LCD.
In the current implementation, there is a serious bug
because the required memory is allocated before
relocation, but the driver knows only later which is
the resolution of the display. The patch switches the driver
to CONFIG_VIDEO and the memory is allocated by the driver itself.
We also need to switch the vision2 board code and config file
in the same commit so that this commit will be bisectable.
projects / u-boot.git / log
