Paul Burton [Mon, 16 May 2016 09:52:14 +0000 (10:52 +0100)]
malta: Support MIPS32r6 configurations
Both real Malta boards & QEMU's Malta emulation can feature MIPS32r6
CPUs. Allow building U-Boot for such systems by selecting
CONFIG_SUPPORTS_CPU_MIPS32_R6 for Malta.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Paul Burton [Mon, 16 May 2016 09:52:13 +0000 (10:52 +0100)]
malta: Remove ".set mips32" directive
We always build for a mips32 or higher ISA, so this ".set mips32"
directive is redundant. Once MIPSr6 support is added it will become
harmful since some instruction encodings change & this directive will
cause the older encodings to be incorrectly emitted instead of the
appropriate ones for the build.
In preparation for supporting MIPSr6, remove this redundant directive.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Paul Burton [Mon, 16 May 2016 09:52:12 +0000 (10:52 +0100)]
MIPS: Support for targetting MIPSr6
Add support for targetting MIPS32r6 & MIPS64r6 systems, in the same way
that we currently select release 1 or release 2 targets. MIPSr6 is not
entirely backwards compatible with earlier releases of the architecture.
Some instructions are encoded differently, some are removed, some are
reused, so it is not practical to run U-Boot built for earlier revisions
on a MIPSr6 system. Update their Kconfig help text to reflect that.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Paul Burton [Mon, 16 May 2016 09:52:11 +0000 (10:52 +0100)]
MIPS: Simplify CONFIG_SYS_CPU values
Rather than having the values for CONFIG_SYS_CPU depend upon each
architecture revision, have them depend upon the more general
CONFIG_CPU_MIPS32 & CONFIG_CPU_MIPS64 which in turn depend upon the
architecture revisions.
This is done in preparation for adding MIPSr6 support, which would
otherwise need to introduce new cases here.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Paul Burton [Mon, 16 May 2016 09:52:10 +0000 (10:52 +0100)]
MIPS: Use unchecked immediate addition/subtraction
In MIPS assembly there have historically been 2 variants of immediate
addition - the standard "addi" which traps if an overflow occurs, and
the unchecked "addiu" which does not trap on overflow. In release 6 of
the MIPS architecture the trapping variants of immediate addition &
subtraction have been removed. In preparation for supporting MIPSr6,
stop using the trapping instructions from assembly & switch to their
unchecked variants.
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Marek Vasut [Fri, 6 May 2016 18:10:41 +0000 (20:10 +0200)]
mips: ath79: Add support for TPLink WDR4300
Add support for the TPLink WDR4300 router, which is based on the
AR9344 MIPS 74Kc CPU and has 128 MiB of RAM. The USB is supported
on this system as well.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com>
Marek Vasut [Fri, 6 May 2016 18:10:40 +0000 (20:10 +0200)]
mips: ath79: Add AR934x support
Add support for the Atheros AR934x WiSoCs. This patchs adds complete
system init, including PLL and DRAM init, both of which happen from
full C environment, since the AR934x has proper SRAM.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com>
Marek Vasut [Fri, 6 May 2016 18:10:33 +0000 (20:10 +0200)]
mips: Add MIPS 74Kc tune
Add MIPS 74Kc tune Kconfig option.
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Cc: Wills Wang <wills.wang@live.com>
[added missing tune-y entry in arch/mips/Makefile] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Marek Vasut [Thu, 5 May 2016 18:14:00 +0000 (20:14 +0200)]
mips: Fix compiler warning in cpu.c
There really is zero reason for including netdev.h in generic mips CPU code.
Removing the netdev.h from cpu.c also fixes the following compiler warning:
In file included from arch/mips/cpu/cpu.c:10:0:
include/netdev.h:204:41: warning: 'struct eth_device' declared inside parameter list [enabled by default]
int fecmxc_register_mii_postcall(struct eth_device *dev, int (*cb)(int));
^
include/netdev.h:204:41: warning: its scope is only this definition or declaration, which is probably not what you want [enabled by default]
Signed-off-by: Marek Vasut <marex@denx.de> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
PIC32 internal flash devices are parallel NOR flash divided into
number of banks to allow erase-programming in one while fetch and
execution continues on other. As the flash banks are memory mapped
stored code can be executed directly from flash (XIP), also there
is additional hardware logic to prefetch and cache contents to
improve execution performance. These flash can also be used to
store user data (like environment).
Flash erase and programming are handled by on-chip NVM controller.
Driver implemented driver model but MTD is not really support.
Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Reviewed-by: Simon Glass <sjg@chromium.org>
flash: add device ID for Microchip PIC32 internal flash.
Microchip PIC32 has internal parallel flash (non-CFI compliant).
These flash devices do not support any identifier command so no
standard IDs. Added unique IDs to seperate these flash devices
from others supported by U-Boot.
Wills Wang [Wed, 16 Mar 2016 08:59:58 +0000 (16:59 +0800)]
drivers: spi: add spi support for QCA/Atheros ath79 SOCs
This patch add a compatible spi driver for ath79 series SOC.
Signed-off-by: Wills Wang <wills.wang@live.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Wills Wang [Wed, 16 Mar 2016 08:59:57 +0000 (16:59 +0800)]
drivers: serial: add serial driver for ar933x SOC
This patch add support for ar933x serial.
Signed-off-by: Wills Wang <wills.wang@live.com> Reviewed-by: Thomas Chou <thomas@wytron.com.tw> Reviewed-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com> Reviewed-by: Simon Glass <sjg@chromium.org>
Wills Wang [Wed, 16 Mar 2016 08:59:56 +0000 (16:59 +0800)]
drivers: pinctrl: Add simple pinctrl driver for Qualcomm/Atheros qca953x.
This is a simple pinctrl driver, it just support uart and spi pin-mux now.
Signed-off-by: Wills Wang <wills.wang@live.com> Reviewed-by: Simon Glass <sjg@chromium.org>
[fixed typo in commit subject line] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Wills Wang [Wed, 16 Mar 2016 08:59:55 +0000 (16:59 +0800)]
drivers: pinctrl: Add simple pinctrl driver for Qualcomm/Atheros ar933x.
This is a simple pinctrl driver, it just support uart and spi pin-mux now.
Signed-off-by: Wills Wang <wills.wang@live.com> Reviewed-by: Simon Glass <sjg@chromium.org>
[fixed typo in commit subject line] Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>
Simon Glass [Sun, 1 May 2016 19:52:44 +0000 (13:52 -0600)]
dm: mmc: test: Add tests for MMC
Add a simple test which checks that a sandbox-emulated SD card can be used
correctly. This tests plumbing through the MMC stack's block-device
implementaion.
Simon Glass [Sun, 1 May 2016 19:52:42 +0000 (13:52 -0600)]
dm: mmc: sandbox: Add an SD-card emulation
Add an emulation of an SD card to sandbox, allowing MMC to be used in tests.
The emulation is very simple, supporting only card detection and reading
test data.
Simon Glass [Sun, 1 May 2016 19:52:40 +0000 (13:52 -0600)]
dm: mmc: Add a way to bind MMC devices with driver model
Binding an MMC device when CONFIG_BLK is enabled requires that a block
device be bound as a child of the MMC device. Add a function to do this.
The mmc_create() method will be used only when DM_BLK is disabled.
Simon Glass [Sun, 1 May 2016 19:52:39 +0000 (13:52 -0600)]
dm: mmc: Implement the MMC functions for block devices
Implement the functions in mmc_legacy.c for driver-model block devices, so
that MMC can use driver model for these. This allows CONFIG_BLK to be enabled
with DM_MMC.
Simon Glass [Sun, 1 May 2016 19:52:35 +0000 (13:52 -0600)]
dm: mmc: Move the device list into a separate file
At present the MMC subsystem maintains its own list of MMC devices. This
cannot work with driver model, which needs to maintain this itself. Move the
list code into a separate 'legacy' file. The core MMC code remains, and will
be shared with the driver-model implementation.
Simon Glass [Sun, 1 May 2016 19:52:30 +0000 (13:52 -0600)]
dm: blk: Add functions to select a hardware partition
The block device uclass does not currently support selecting a particular
hardware partition but this is needed for MMC. Add it so that the blk API
can support MMC properly.
Simon Glass [Sun, 1 May 2016 19:52:27 +0000 (13:52 -0600)]
dm: mmc: Add a function to obtain the block device
The MMC block device is contained within struct mmc. But with driver model
this will not be the case. Add a function to obtain the block device. We
can later implement this for CONFIG_BLK.
Simon Glass [Sun, 1 May 2016 19:52:25 +0000 (13:52 -0600)]
dm: mmc: Move mmc_switch_part() above its callers
This function is defined after it is used. In preparation for making it
static, move it up a little. Also drop the printf() which should not appear
in a driver.
Simon Glass [Sun, 1 May 2016 17:36:29 +0000 (11:36 -0600)]
dm: blk: Add a easier way to create a named block device
Add a function that automatically builds the device name given the parent
and a supplied string. Most callers will want to do this, so putting this
functionality in one place makes more sense.
Simon Glass [Sun, 1 May 2016 17:36:28 +0000 (11:36 -0600)]
dm: blk: Allow blk_create_device() to allocate the device number
Allow a devnum parameter of -1 to indicate that the device number should be
alocated automatically. The next highest available device number for that
interface type is used.
Simon Glass [Sun, 1 May 2016 17:36:26 +0000 (11:36 -0600)]
dm: sata: Add support for driver-model block devices
Add driver-model block-device support to the SATA implementation. This is
just a dummy implementation for now, since the SATA low-level API uses
numbered devices and that doesn't fit with driver model.
Simon Glass [Sun, 1 May 2016 17:36:11 +0000 (11:36 -0600)]
dm: sata: Separate the non-command code into its own file
At present the SATA command code includes both the command-processing code
and the core SATA functions and data structures.
Separate the latter into its own file, adding functions as needed to avoid
the command code accessing data structures directly.
With this commit:
- All CONFIG option are referenced from the non-command code
- The concept of a 'current SATA device' is confined to the command code
This will make it easier to convert this code to driver model.
Simon Glass [Sun, 1 May 2016 17:36:10 +0000 (11:36 -0600)]
dm: ide: Separate the non-command code into its own file
At present the IDE command code includes both the command-processing code
and the core IDE functions and data structures.
Separate the latter into its own file, adding functions as needed to avoid
the command code accessing data structures directly.
With this commit:
- Most CONFIG option are referenced from the non-command code
- The concept of a 'current IDE device' is confined to the command code
This will make it easier to convert this code to driver model.
Simon Glass [Sun, 1 May 2016 17:36:09 +0000 (11:36 -0600)]
dm: scsi: Separate the non-command code into its own file
At present the SCSI command code includes both the command-processing code
and the core SCSI functions and data structures.
Separate the latter into its own file, adding functions as needed to avoid
the command code accessing data structures directly. This functions use the
new legacy block functions.
With this commit:
- There is no CONFIG option referenced from the command code
- The concept of a 'current SCSI device' is confined to the command code
This will make it easier to convert this code to driver model.
Simon Glass [Sun, 1 May 2016 17:36:08 +0000 (11:36 -0600)]
dm: mmc: Add an implementation of the 'devnum' functions
Now that the MMC code accesses devices by number, we can implement this same
interface for driver model, allowing MMC to support using driver model for
block devices.
Simon Glass [Sun, 1 May 2016 17:36:02 +0000 (11:36 -0600)]
dm: scsi: Rename CONFIG_CMD_SCSI to CONFIG_SCSI
This option currently enables both the command and the SCSI functionality.
Rename the existing option to CONFIG_SCSI since most of the code relates
to the feature.
Simon Glass [Sun, 1 May 2016 17:35:54 +0000 (11:35 -0600)]
sandbox: Add string and 16-bit I/O functions
Add outsw() and insw() functions for sandbox, as these are needed by the IDE
code. The functions will not do anything useful if called, but allow the
code to be compiled.
Also add out16() and in16(), required by systemace.
Simon Glass [Sun, 1 May 2016 17:35:53 +0000 (11:35 -0600)]
Allow iotrace byte access to use an address of any size
If an address is used with readb() and writeb() which is smaller than the
expected size (e.g. 32-bit value on a machine with 64-bit addresses), a
warning results. Fix this by adding a cast.
projects / u-boot.git / log
