]> git.dujemihanovic.xyz Git - u-boot.git/log
u-boot.git
19 years ago* Extend burst mode RAM test program to take a loop count
wdenk [Mon, 23 May 2005 10:49:50 +0000 (10:49 +0000)]
* Extend burst mode RAM test program to take a loop count
  (0 = infinite)

* Use CONFIG_DRIVER_KS8695ETH to enable KS8695 ethernet driver on
  those boards that use it.

19 years agoPatch by Greg Ungerer, 19 May 2005:
wdenk [Thu, 19 May 2005 22:46:33 +0000 (22:46 +0000)]
Patch by Greg Ungerer, 19 May 2005:
add support for the OpenGear CM4008 board

19 years agoPatch by Greg Ungerer, 19 May 2005:
wdenk [Thu, 19 May 2005 22:46:33 +0000 (22:46 +0000)]
Patch by Greg Ungerer, 19 May 2005:
add support for the OpenGear CM4008 board

19 years ago* Patch by Greg Ungerer, 19 May 2005:
wdenk [Thu, 19 May 2005 22:39:42 +0000 (22:39 +0000)]
* Patch by Greg Ungerer, 19 May 2005:
  add support for the KS8695P (ARM 922 based) CPU

* Patch by Steven Scholz, 19 May 2005:
  Add support for CONFIG_SERIAL_TAG on ARM boards

19 years agoAdd PCI support for Sorcery board.
wdenk [Mon, 16 May 2005 15:23:22 +0000 (15:23 +0000)]
Add PCI support for Sorcery board.
Code cleanup (especially Sorcery / Alaska / Yukon serial driver).

19 years agoFix compile problems caused by new burst mode SDRAM test;
wdenk [Mon, 16 May 2005 14:19:49 +0000 (14:19 +0000)]
Fix compile problems caused by new burst mode SDRAM test;
make port pins to trigger logic analyzer configurable

19 years agoFix timer handling on MPC85xx systems
wdenk [Fri, 13 May 2005 22:49:36 +0000 (22:49 +0000)]
Fix timer handling on MPC85xx systems

19 years ago* Fix debug code in omap5912osk flash driver
wdenk [Thu, 12 May 2005 22:48:09 +0000 (22:48 +0000)]
* Fix debug code in omap5912osk flash driver

* Add support for MPC8247 based "IDS8247" board.

19 years agoAdd support for 2 x TSEC interfaces on the TQM8540 board.
wdenk [Tue, 10 May 2005 15:51:35 +0000 (15:51 +0000)]
Add support for 2 x TSEC interfaces on the TQM8540 board.

19 years agoOn LWMON we must use the watchdog to reset the board as the CPU
wdenk [Mon, 9 May 2005 10:17:32 +0000 (10:17 +0000)]
On LWMON we must use the watchdog to reset the board as the CPU
genereated HRESET pulse is too short to reset the external circuitry.

19 years agoAdd test tool to exercise SDRAM accesses in burst mode
wdenk [Sat, 7 May 2005 19:06:32 +0000 (19:06 +0000)]
Add test tool to exercise SDRAM accesses in burst mode
(as standalone program, MPC8xx/PowerPC only)

19 years agoIt's better to handle LZO and LZARI compression mdoes for JFFS2 with
wdenk [Thu, 5 May 2005 09:51:44 +0000 (09:51 +0000)]
It's better to handle LZO and LZARI compression mdoes for JFFS2 with
a single #define.

19 years agoIncrease CFG_MONITOR_LEN for Rattler board to match actual code size.
wdenk [Thu, 5 May 2005 09:13:21 +0000 (09:13 +0000)]
Increase CFG_MONITOR_LEN for Rattler board to match actual code size.

19 years agoMajor upate of JFFS2 code; now in sync with snapshot of MTD CVS of
wdenk [Thu, 5 May 2005 00:04:14 +0000 (00:04 +0000)]
Major upate of JFFS2 code; now in sync with snapshot of MTD CVS of
March 13, 2005); new configuration options CONFIG_JFFS2_LZO and
CONFIG_JFFS2_LZARI are added. Both are undefined by default.

19 years agoFix problem with symbolic links in JFFS2 code.
wdenk [Wed, 4 May 2005 23:50:54 +0000 (23:50 +0000)]
Fix problem with symbolic links in JFFS2 code.

19 years agoUse linker ASSERT statement to prevent undetected overlapping of
wdenk [Wed, 4 May 2005 23:44:59 +0000 (23:44 +0000)]
Use linker ASSERT statement to prevent undetected overlapping of
sections on PPChameleon board; other boards might use this, too.

19 years agoREADME: add explanation about patch policy
wdenk [Tue, 3 May 2005 14:12:25 +0000 (14:12 +0000)]
README: add explanation about patch policy
net/net.c: fix indentation

19 years ago* Patch by Stefan Roese, 03 May 2005:
stroese [Tue, 3 May 2005 06:19:57 +0000 (06:19 +0000)]
* Patch by Stefan Roese, 03 May 2005:
  Update for P3G4
  Fix problems in cmd_universe.c

* Patch by Matthias Fuchs, 03 May 2005:
  Added missing variable declaration in cmd_nand.c
  Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram

19 years ago* Patch by Matthias Fuchs, 03 May 2005:
stroese [Tue, 3 May 2005 06:12:20 +0000 (06:12 +0000)]
* Patch by Matthias Fuchs, 03 May 2005:
  Added missing variable declaration in cmd_nand.c
  Modified CFG_PCI_PTM1MS in configs/PLU405.h to map 128MB ram

19 years ago* Patch by Stefan Roese, 03 May 2005:
stroese [Tue, 3 May 2005 06:06:41 +0000 (06:06 +0000)]
* Patch by Stefan Roese, 03 May 2005:
  Update for P3G4
  Fix problems in cmd_universe.c

19 years agoFix INKA4x0: use CS1 as gpio_wkup_6 output
wdenk [Fri, 22 Apr 2005 15:09:09 +0000 (15:09 +0000)]
Fix INKA4x0: use CS1 as gpio_wkup_6 output

19 years agoFix bug in the SDRAM initialization code for canmb, IceCube and
wdenk [Thu, 21 Apr 2005 21:10:22 +0000 (21:10 +0000)]
Fix bug in the SDRAM initialization code for canmb, IceCube and
PM520 boards.

Fix PHY address for canmb board.

19 years agoget rid of obsolete CFG_AT91C_BRGR_DIVISOR definition
wdenk [Wed, 20 Apr 2005 14:38:59 +0000 (14:38 +0000)]
get rid of obsolete CFG_AT91C_BRGR_DIVISOR definition

19 years agoCleanup serial console baudrate calculation on AT91RM9200
wdenk [Wed, 20 Apr 2005 12:36:05 +0000 (12:36 +0000)]
Cleanup serial console baudrate calculation on AT91RM9200

19 years agoAuto-size RAM on canmb board.
wdenk [Wed, 20 Apr 2005 09:28:54 +0000 (09:28 +0000)]
Auto-size RAM on canmb board.

Cleanup.

19 years ago* Patch by Matthias Fuchs, 18 Apr 2005:
stroese [Wed, 20 Apr 2005 06:52:40 +0000 (06:52 +0000)]
* Patch by Matthias Fuchs, 18 Apr 2005:
  Make PCI target address spaces on PMC405 and CPCI405 boards
  configurable via environment variables

19 years agoAdd support for canmb board
wdenk [Wed, 13 Apr 2005 23:15:10 +0000 (23:15 +0000)]
Add support for canmb board

19 years ago* Patch by Stefan Roese, 13 Apr 2005:
stroese [Wed, 13 Apr 2005 10:08:39 +0000 (10:08 +0000)]
* Patch by Stefan Roese, 13 Apr 2005:
  Update for esd apc405

19 years agoUpdate for esd apc405
stroese [Wed, 13 Apr 2005 10:06:07 +0000 (10:06 +0000)]
Update for esd apc405

19 years ago* Fixes for TQM8560 board:
wdenk [Wed, 13 Apr 2005 10:02:42 +0000 (10:02 +0000)]
* Fixes for TQM8560 board:
  - fix clock rates
  - remove debug messages
  - fix flash sector protection

* Patch by Steven Scholz, 07 Apr 2005:
  Fix warning in cpu/arm920t/at91rm9200/i2c.c

19 years agoCleanup
wdenk [Thu, 7 Apr 2005 22:41:05 +0000 (22:41 +0000)]
Cleanup

19 years ago* Patch by Steven Scholz, 07 Apr 2005:
wdenk [Thu, 7 Apr 2005 22:36:40 +0000 (22:36 +0000)]
* Patch by Steven Scholz, 07 Apr 2005:
  Add i2c_reg_write() and i2c_reg_write() for at91rm9200 I2C

* Patch by Steven Scholz, 07 Apr 2005:
  Fix compiler warning in altera.c

* Patch by Ladislav Michl, 06 Apr 2005:
  Fix voiceblue configuration.

19 years ago* Patch by Stefan Roese, 06 Apr 2005:
stroese [Thu, 7 Apr 2005 05:35:12 +0000 (05:35 +0000)]
* Patch by Stefan Roese, 06 Apr 2005:
  Updates for OCOTEA board:
  - Changed U-Boot size from 512kByte to 256kByte
  - Fixed flash driver to support boot from soldered user flash
  - Added README for switch from PIBS firmware to U-Boot

19 years agoAdd PPC440GX Revision C
stroese [Thu, 7 Apr 2005 05:33:41 +0000 (05:33 +0000)]
Add PPC440GX Revision C

19 years ago* Patch by Travis Sawyer, 05 Apr 2005:
stroese [Thu, 7 Apr 2005 05:32:44 +0000 (05:32 +0000)]
* Patch by Travis Sawyer, 05 Apr 2005:
  - Change timer frequency for ppc 440 from 10 ms to 1 ms.
    Problem found by Andrew Wozniak.

19 years agoPatch by Steven Scholz, 06 Apr 2005:
wdenk [Wed, 6 Apr 2005 13:52:31 +0000 (13:52 +0000)]
Patch by Steven Scholz, 06 Apr 2005:
- creating SoC subdir for Atmel AT91RM9200 cpu/arm920t/at91rm9200
- moving code out of cpu/at91rm9200 into cpu/arm920t/at91rm9200

19 years ago* Patches by Robert Whaley, 29 Nov 2004:
wdenk [Wed, 6 Apr 2005 00:04:16 +0000 (00:04 +0000)]
* Patches by Robert Whaley, 29 Nov 2004:
  - update the pxa-regs.h file for PXA27x chips
  - add PXA27x based ADSVIX board
  - add support for MMC on PXA27x processors

* Patch by Andrew E. Mileski, 28 Nov 2004:
  Fix PPC4xx SPD SDRAM detection bug

* Patch by Hiroshi Ito, 26 Nov 2004:
  Fix logic of "test -z" and "test -n" commands

19 years ago* Patch by Ladislav Michl, 05 Apr 2005:
wdenk [Tue, 5 Apr 2005 23:32:21 +0000 (23:32 +0000)]
* Patch by Ladislav Michl, 05 Apr 2005:
  Add support for VoiceBlue board.

* Patch by Ladislav Michl, 05 Apr 2005:
  Fix netboot_common() prototypes.

* Cleanup.

19 years agoPatches by Steven Scholz, 05 Apr 2005:
wdenk [Tue, 5 Apr 2005 22:30:50 +0000 (22:30 +0000)]
Patches by Steven Scholz, 05 Apr 2005:
- Use i.MX watchdog timer for reset_cpu()
- Move reset_cpu() out of cpu/arm920t/start.S into the SoC specific
  subdirectories cpu/arm920t/imx/ and cpu/arm920t/s3c24x0/
  (now in interupts.c)

19 years agoAdd support for MPC8220 based "sorcery" board.
wdenk [Tue, 5 Apr 2005 21:57:18 +0000 (21:57 +0000)]
Add support for MPC8220 based "sorcery" board.

19 years agoAdd support for TQM8560 board
wdenk [Tue, 5 Apr 2005 16:26:47 +0000 (16:26 +0000)]
Add support for TQM8560 board

19 years ago* Add FEC support for TQM8540 board.
wdenk [Mon, 4 Apr 2005 23:43:44 +0000 (23:43 +0000)]
* Add FEC support for TQM8540 board.
  Interfaces are named as follows: "ENET1" - TSEC2, "ENET2" - FEC

* Patch by Martin Krause, 04 Apr 2005:
  Update default configuration for CMC_PU2 board.

19 years agoPatch by Steven Scholz, 4 Apr 2005:
wdenk [Mon, 4 Apr 2005 12:44:11 +0000 (12:44 +0000)]
Patch by Steven Scholz, 4 Apr 2005:
- remove all references to CONFIG_INIT_CRITICAL for ARM based boards
- introduce two new configuration options instead:
  CONFIG_SKIP_LOWLEVEL_INIT and CONFIG_SKIP_RELOCATE_UBOOT

19 years agoUse the same name (lowlevel_init) for all (ARM) boards
wdenk [Mon, 4 Apr 2005 12:36:04 +0000 (12:36 +0000)]
Use the same name (lowlevel_init) for all (ARM) boards

19 years agoPatch by Steven Scholz, 04 Apr 2005:
wdenk [Mon, 4 Apr 2005 12:23:03 +0000 (12:23 +0000)]
Patch by Steven Scholz, 04 Apr 2005:
Make sure that MDIO clock does not exceed 2.5 MHz on AT91

19 years agoFix timer code for ARM systems: make sure that udelay() does not
wdenk [Mon, 4 Apr 2005 12:08:28 +0000 (12:08 +0000)]
Fix timer code for ARM systems: make sure that udelay() does not
reset timers so it's save to use udelay() in timeout code.

19 years ago* Patch by Mathias Küster, 23 Nov 2004:
wdenk [Sun, 3 Apr 2005 23:35:57 +0000 (23:35 +0000)]
* Patch by Mathias Küster, 23 Nov 2004:
  add udelay support for the mcf5282 cpu

* Patch by Tolunay Orkun, 16 November 2004:
  fix incorrect onboard Xilinx CPLD base address

19 years agoPatch by Jerry Van Baren, 08 Nov 2004:
wdenk [Sun, 3 Apr 2005 23:22:21 +0000 (23:22 +0000)]
Patch by Jerry Van Baren, 08 Nov 2004:
- Add low-boot option for MPC8260ADS board (if lowboot is selected,
  the jumper for the HRCW source should select flash. If lowboot is
  not selected, the jumper for the HRCW source should select the
  BCSR.
- change default load base address to 0x00400000

19 years ago* Patch by Yuli Barcohen, 08 Nov 2004:
wdenk [Sun, 3 Apr 2005 23:11:38 +0000 (23:11 +0000)]
* Patch by Yuli Barcohen, 08 Nov 2004:
  Add support for Analogue & Micro Rattler boards.
  Tested on Rattler8248.

* Patch by Andre Renaud, 08 Nov 2004:
  Fix watchdog support in common/lcd.c

* Patch by Marc Leeman, 05 Nov 2003:
  Enable all 4 PCMBRW buffers for the MPC8245 processor since the CPU
  bug only affects the XPC8245 processors

19 years agoPatches by Josef Wagner, 29 Oct 2004:
wdenk [Sun, 3 Apr 2005 22:35:21 +0000 (22:35 +0000)]
Patches by Josef Wagner, 29 Oct 2004:
- Add support for MicroSys CPU87 board
- Add support for MicroSys PM854 board

19 years ago* Patch by Scott McNutt, 01 Nov 2004:
wdenk [Sun, 3 Apr 2005 21:11:16 +0000 (21:11 +0000)]
* Patch by Scott McNutt, 01 Nov 2004:
  Add missing NIOS/NIOS2 support for "iminfo" command

* Patch by Detlev Zundel, 29 Oct 2004:
  Add missing NIOS/NIOS2 support for "mkimage" tool.

19 years agoPatch by David Adair, 27 Oct 2004:
wdenk [Sun, 3 Apr 2005 20:55:38 +0000 (20:55 +0000)]
Patch by David Adair, 27 Oct 2004:
Add missing 440GX SDRAM Controller reset

19 years agoPatch by Steven Scholz, 25 Oct 2004:
wdenk [Sun, 3 Apr 2005 17:23:39 +0000 (17:23 +0000)]
Patch by Steven Scholz, 25 Oct 2004:
Declare reset_cpu() in include/common.h instead locally

19 years ago* Patch by Yusdi Santoso, 22 Oct 2004:
wdenk [Sun, 3 Apr 2005 15:51:42 +0000 (15:51 +0000)]
* Patch by Yusdi Santoso, 22 Oct 2004:
  - Add support for HIDDEN_DRAGON board
  - fix endianess problem in driver/rtl1839.c

* Patch by Allen Curtis, 21 Oct 2004:
  support multiple serial ports

19 years ago* Patch by Richard Klingler, 03 Apr 2005:
wdenk [Sun, 3 Apr 2005 14:52:59 +0000 (14:52 +0000)]
* Patch by Richard Klingler, 03 Apr 2005:
  Add call to eth_halt() in net/net.c when called functions fail
  after eth_init() has been called.

* Patch by Sam Song, 3 April 2005:
  - Update README.Netconsole
  - Update README

19 years agoPatch by Steven Scholz, 03 Apr 2005:
wdenk [Sun, 3 Apr 2005 14:26:46 +0000 (14:26 +0000)]
Patch by Steven Scholz, 03 Apr 2005:
- create SoC specific directories include/asm-arm/arch-imx and
  include/asm-arm/arch-s3c24x0

19 years agoMinor cleanup
wdenk [Sun, 3 Apr 2005 14:18:51 +0000 (14:18 +0000)]
Minor cleanup

19 years agoPrepare for SoC rework of ARM code:
wdenk [Sat, 2 Apr 2005 23:52:25 +0000 (23:52 +0000)]
Prepare for SoC rework of ARM code:
- rename CONFIG_BOOTBINFUNC into  CONFIG_INIT_CRITICAL
- rename memsetup into lowlevel_init (function name and source files)

19 years agoFix problems with SNTP support;
wdenk [Sat, 2 Apr 2005 22:37:54 +0000 (22:37 +0000)]
Fix problems with SNTP support;
enable SNTP support in some boards.

19 years agoPatch by Martin Krause, 01 Apr 2005:
wdenk [Fri, 1 Apr 2005 15:18:44 +0000 (15:18 +0000)]
Patch by Martin Krause, 01 Apr 2005:
Add automatic HW detection for CMC_PU2 and CMC_BASIC

19 years agoPatch by Martin Krause, 01 Apr 2005:
wdenk [Fri, 1 Apr 2005 09:29:14 +0000 (09:29 +0000)]
Patch by Martin Krause, 01 Apr 2005:
Fix flash erase timeout on CMC_PU2

19 years agoPatch by Steven Scholz, 13 March 2005:
wdenk [Fri, 1 Apr 2005 09:14:58 +0000 (09:14 +0000)]
Patch by Steven Scholz, 13 March 2005:
fix cache enabling for AT91RM9200

19 years ago* Patch by Masami Komiya, 30 Mar 2005:
wdenk [Fri, 1 Apr 2005 00:25:43 +0000 (00:25 +0000)]
* Patch by Masami Komiya, 30 Mar 2005:
  add SNTP support and expand time server and time offset fields of
  DHCP support. See doc/README.SNTP

* Patch by Steven Scholz, 13 Dec 2004:
  Fix bug in at91rm920 ethernet driver

19 years agoPatch by Steven Scholz, 13 Dec 2004:
wdenk [Thu, 31 Mar 2005 23:44:33 +0000 (23:44 +0000)]
Patch by Steven Scholz, 13 Dec 2004:
Remove duplicated code by merging memsetup.S files for
at91rm9200 boards into one cpu/at91rm9200/lowlevel.S

19 years ago* Patch by Detlev Zundel, 31 Mar 2005:
wdenk [Thu, 31 Mar 2005 18:42:15 +0000 (18:42 +0000)]
* Patch by Detlev Zundel, 31 Mar 2005:
  Cleanup duplicate definition of overwrite_console()

* Update TQM5200 configuration;
  prepare for Rev. 200 starter kit boards

19 years ago* Patch by Scott McNutt, 21 Oct 2004:
wdenk [Wed, 30 Mar 2005 23:28:18 +0000 (23:28 +0000)]
* Patch by Scott McNutt, 21 Oct 2004:
  Add support for Nios-II EPCS Controller core.

* Patch by Scott McNutt, 20 Oct 2004:
  Nios-II cleanups:
  - Add sysid command (Nios-II only).
  - Locate default exception trampoline at proper offset.
  - Implement I/O routines (readb, writeb, etc)
  - Implement do_bootm_linux

19 years agoPatches by Martin Krause, 22 Mar 2005:
wdenk [Sun, 27 Mar 2005 23:41:39 +0000 (23:41 +0000)]
Patches by Martin Krause, 22 Mar 2005:
- use TQM5200_auto as MAKEALL target for TQM5200 systems
- add support for SM501 graphics controller
- add support for graphic console on TQM5200
- add support for TQM5200 Rev 200
- cleanup, fix typo in include/configs/TQM5200.h

19 years agoPatch by Manfred Baral, 17 Mar 2005:
wdenk [Sun, 20 Mar 2005 22:33:46 +0000 (22:33 +0000)]
Patch by Manfred Baral, 17 Mar 2005:
Fix typo

19 years ago* Fix RTC configuration for PPChameleon board
wdenk [Thu, 17 Mar 2005 16:43:10 +0000 (16:43 +0000)]
* Fix RTC configuration for PPChameleon board

* Cleanup, fix typo in include/configs/TQM5200.h

19 years agoUpdate for esd auto_update and hh405 board
stroese [Thu, 17 Mar 2005 15:41:17 +0000 (15:41 +0000)]
Update for esd auto_update and hh405 board

19 years agoUpdate for esd auto_update and hh405 board
stroese [Wed, 16 Mar 2005 20:58:31 +0000 (20:58 +0000)]
Update for esd auto_update and hh405 board

19 years agoAdapt for U-Boot image size (new features enabled) on TQM5200
wdenk [Wed, 16 Mar 2005 16:32:26 +0000 (16:32 +0000)]
Adapt for U-Boot image size (new features enabled) on TQM5200

19 years agoUpdate code for TQM8540 board (and 85xx in general):
wdenk [Tue, 15 Mar 2005 22:56:53 +0000 (22:56 +0000)]
Update code for TQM8540 board (and 85xx in general):
- Change the name of the Ethernet driver: MOTO ENET -> ENET
- Reformat boot messages
- Enable redundant environment
- Replace the -O2 optimization flag with -mno-string

19 years agoTune TQM8540 default configuration.
wdenk [Tue, 15 Mar 2005 00:26:31 +0000 (00:26 +0000)]
Tune TQM8540 default configuration.

19 years agoAdd TQM8540 to MAKEALL lists
wdenk [Tue, 15 Mar 2005 00:03:03 +0000 (00:03 +0000)]
Add TQM8540 to MAKEALL lists

19 years ago* Patch by David Brownell, 10 Mar 2005:
wdenk [Mon, 14 Mar 2005 23:56:42 +0000 (23:56 +0000)]
* Patch by David Brownell, 10 Mar 2005:
  Restore copyright statements in OHCI drivers.

* Add support for TQM8540 board

19 years agoPatch by Detlev Zundel, 14 Mar 2005:
wdenk [Mon, 14 Mar 2005 23:01:03 +0000 (23:01 +0000)]
Patch by Detlev Zundel, 14 Mar 2005:
NC650: changed NAND flash addressing to using UPMB

19 years agoINKA4x0: Allow initialization of LCD backlight dimming from
wdenk [Mon, 14 Mar 2005 13:14:58 +0000 (13:14 +0000)]
INKA4x0: Allow initialization of LCD backlight dimming from
"brightness" environment variable.

19 years agoUpdate for esd voh405 fpga image
stroese [Mon, 14 Mar 2005 12:56:21 +0000 (12:56 +0000)]
Update for esd voh405 fpga image

19 years agoAdd port initialization for digital I/O on INKA4x0
wdenk [Sun, 6 Mar 2005 01:21:30 +0000 (01:21 +0000)]
Add port initialization for digital I/O on INKA4x0

19 years ago* Fix get_partition_info() parameter error in all other calls
wdenk [Fri, 4 Mar 2005 11:27:31 +0000 (11:27 +0000)]
* Fix get_partition_info() parameter error in all other calls
  (common/cmd_ide.c, common/cmd_reiser.c, common/cmd_scsi.c).

* Enable USB and IDE support for INKA4x0 board

* Patch by Andrew Dyer, 28 February 2005:
  fix ext2load passing an incorrect pointer to get_partition_info()
  resulting in load failure for devices other than 0

19 years agoUpdate for esd boards dp405 and hub405
stroese [Tue, 1 Mar 2005 17:26:39 +0000 (17:26 +0000)]
Update for esd boards dp405 and hub405

19 years agoAdd support for SRAM and 2 x Quad UARTs on INKA4x0 board
wdenk [Sun, 27 Feb 2005 23:46:58 +0000 (23:46 +0000)]
Add support for SRAM and 2 x Quad UARTs on INKA4x0 board

19 years agoCleanup USB and partition defines
wdenk [Thu, 24 Feb 2005 23:23:29 +0000 (23:23 +0000)]
Cleanup USB and partition defines

19 years ago* Add support for ext2 filesystems and image timestamps to TQM5200 board
wdenk [Thu, 24 Feb 2005 22:44:16 +0000 (22:44 +0000)]
* Add support for ext2 filesystems and image timestamps to TQM5200 board

* Add reset code for Coral-P on INKA4x0 board

* Patch by Martin Krause, 28 Jun 2004:
  Update for TRAB board.

* Fix some missing "volatile"s in MPC5xxx FEC driver

19 years agoFix yet another recently introduced bug.
wdenk [Tue, 8 Feb 2005 15:29:01 +0000 (15:29 +0000)]
Fix yet another recently introduced bug.

19 years agoFix cirrus voltage detection (for CPC45)
wdenk [Mon, 7 Feb 2005 19:44:17 +0000 (19:44 +0000)]
Fix cirrus voltage detection (for CPC45)

19 years agoFix for incomplete byteorder fix in cmd_scsi.c and cmd_usb.c
wdenk [Fri, 4 Feb 2005 21:33:05 +0000 (21:33 +0000)]
Fix for incomplete byteorder fix in cmd_scsi.c and cmd_usb.c

19 years agoFix byteorder problem in usbboot and scsiboot commands.
wdenk [Fri, 4 Feb 2005 15:38:08 +0000 (15:38 +0000)]
Fix byteorder problem in usbboot and scsiboot commands.

19 years ago* Patch by Cajus Hahn, 04 Feb 2005:
wdenk [Fri, 4 Feb 2005 15:02:06 +0000 (15:02 +0000)]
* Patch by Cajus Hahn, 04 Feb 2005:
  - don't insist on leading '/' for filename in ext2load
  - set default partition to useful value (1) in ext2load

* Patch by Andrew Dyer, 08 Jan 2005:
  fix wrong return codes in ext2 code

19 years ago* Removed '--no-warn-mismatch' option from Makefile. This option
wdenk [Thu, 3 Feb 2005 23:00:49 +0000 (23:00 +0000)]
* Removed '--no-warn-mismatch' option from Makefile. This option
  makes 'ld' to overlook binary objects compatibility.

* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
  --end-group) outside of the group. This will make 'ld' to do
  _multiple_ search in the library group when resolving symbol
  references and do only a _single_ seach in libgcc.a after the group
  search.

* Fix stability problems on CPC45 board again.

* Make image detection for diskboot / usbboot / scsiboot more robust
  (also check header checksum)

19 years ago* Update CPC45 board configuration.
wdenk [Mon, 31 Jan 2005 22:09:11 +0000 (22:09 +0000)]
* Update CPC45 board configuration.

* Add USB and PCI support for INKA4x0 board

19 years agoFix IDE stability problems on CPC45 board.
wdenk [Sat, 22 Jan 2005 18:26:04 +0000 (18:26 +0000)]
Fix IDE stability problems on CPC45 board.

19 years agoCode cleanup.
wdenk [Sat, 22 Jan 2005 18:13:04 +0000 (18:13 +0000)]
Code cleanup.

19 years ago* Patch by Robin Getz, 13 Oct 2004:
wdenk [Wed, 12 Jan 2005 00:38:03 +0000 (00:38 +0000)]
* Patch by Robin Getz, 13 Oct 2004:
  Add standalone application to change SMC91C111 MAC addresses,
  see examples/README.smc91111_eeprom

* Patch by Xiaogeng (Shawn) Jin, 12 Oct 2004:
  Fix Flash support for ARM Integrator CP.

19 years ago* Some Cleanup.
wdenk [Wed, 12 Jan 2005 00:15:14 +0000 (00:15 +0000)]
* Some Cleanup.

* Patch by Richard Woodruff, 10 Jan 2005:
  Update support for OMAP2420 (ARM11) and H4 board:
  o clean up and add new types to H4 memory probe code.
  o fix to work with internal boot.
  o added PRCM config III operation.
  o fix marginal flash timings.
  o add revison ATAG usage.
  o enable voltage scaling at power chip.
  o fix compile error for i2c.

* Fix network problem (error when receiving multiple ARP packets)

19 years agoCoding Style cleanup
wdenk [Mon, 10 Jan 2005 00:01:04 +0000 (00:01 +0000)]
Coding Style cleanup

19 years ago* Patch by Daniel Poirot, 10 Oct 2004:
wdenk [Sun, 9 Jan 2005 23:48:14 +0000 (23:48 +0000)]
* Patch by Daniel Poirot, 10 Oct 2004:
  Add support for Wind River sbc405 board

* Patch by Rainer Brestan, 12 Oct 2004:
  Make examples/Makefile more robust

19 years ago* Patch by Sam Song, 11 October 2004:
wdenk [Sun, 9 Jan 2005 23:33:49 +0000 (23:33 +0000)]
* Patch by Sam Song, 11 October 2004:
  - Add RESET/PREBOOT/AUTOBOOT support for RPXlite_DW board
  - Adjust CPU:BUS frequency ratio 1:1 when core frequency
    less than 50MHz

* Patch by Sam Song, 10 Oct 2004:
  Fix a parameter error in run_command() in main.c

19 years ago* Patches by Richard Woodruff, 01 Oct 2004:
wdenk [Sun, 9 Jan 2005 23:16:25 +0000 (23:16 +0000)]
* Patches by Richard Woodruff, 01 Oct 2004:
  add support for the TI OMAP2420 processor and its H4 reference
  board

* Patch by Christian Pellegrin, 24 Sep 2004:
  Added support for NE2000 compatible (DP8390, DP83902) NICs.