Fix conflicting SPDX license information in linker scripts introduced by
commit 7215787c4ea4 ("SPDX: Convert single license tags to Linux Kernel
style").
Fixes: 7215787c4ea4 ("SPDX: Convert single license tags to Linux Kernel style") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Tom Rini <trini@konsulko.com>
Alexander Dahl [Wed, 24 Jan 2024 07:48:58 +0000 (08:48 +0100)]
doc: dm: Fix typo
That's most probably a typo, because driver model design documents seem
to be from 2012 and there is no 2010.01 release.
Fixes: 282ed24fb3ca ("dm: MIGRATION: Add migration plan for CONFIG_DM") Signed-off-by: Alexander Dahl <ada@thorsis.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Marek Vasut [Sun, 21 Jan 2024 17:31:23 +0000 (18:31 +0100)]
ARM: renesas: Drop include common.h
The header file is not necessary in either of those files,
remove it as common.h is going away.
Include missing asm/arch/rmobile.h in board/renesas/rcar-common/v3-common.c
to prevent build failure of r8a77970_eagle r8a779a0_falcon r8a77980_v3hsk
and r8a77970_v3msk .
Include missing asm/u-boot.h in falcon.c and grpeach.c to fix build failure
due to missing definition of struct bd_info . Include errno.h in grpeach.c
to fix build error due to missing definition of EINVAL.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Tom Rini [Sat, 27 Jan 2024 12:53:29 +0000 (07:53 -0500)]
Merge tag 'smbios-2024-04-rc1-2' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request smbios-2024-04-rc1-2
* Add missing field to SMBIOS type 2 structure definition
* Provide smbios command to display smbios table
* Enable the command on sandbox and qemu_arm64_defconfig
* Provide a python test for the smbios command
* Fix copying SMBIOS 2.1 table from QEMU
* Correct EFI TCG measurement to assume SMBIOS 3 table
Masahisa Kojima [Thu, 25 Jan 2024 01:11:28 +0000 (10:11 +0900)]
smbios: use struct_table_length to get SMBIOS 2.1 total table length
The current code convert the SMBIOS 2.1 entry point structure to
SMBIOS 3.0 entry point structure. The max_struct_size member in
SMBIOS 2.1 entry point structure indicates
"Size of the largest SMBIOS structure, in bytes".
We need to use struct_table_length instead.
Fixes: 1c5aab803c0b ("smbios: copy QEMU tables") Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de>
Masahisa Kojima [Fri, 26 Jan 2024 00:53:42 +0000 (09:53 +0900)]
efi_loader: migrate SMBIOS 3.0 entry point structure for measurement
Current U-Boot only supports the SMBIOS 3.0 entry point structure.
TCG2 measurement code should migrate to SMBIOS 3.0 entry
point structure.
efi_selftest tcg2 test also needs to be updated, and expected
PCR[1] result is changed since guid for SMBIOS EFI system table
uses different guid SMBIOS3_TABLE_GUID instead of SMBIOS_TABLE_GUID.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <xypron.glpk@gmx.de> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
cmd: provide command to display SMBIOS information
U-Boot can either generated an SMBIOS table or copy it from a prior boot
stage, e.g. QEMU.
Provide a command to display the SMBIOS information.
Currently only type 1 and 2 are translated to human readable text.
Other types may be added later. Currently only a hexdump and the list of
strings is provided for these.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Patrice Chotard [Wed, 17 Jan 2024 12:37:13 +0000 (13:37 +0100)]
common: console: Fix print complete stdio device list
In case CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV are on and
stdin or stdout or stderr are missing in environment, as fallback, get
these either from stdio_devices[std] or stdio_devices[std]->name.
Fixes: 6b343ab38d ("console: Print out complete stdio device list") Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Svyatoslav Ryhel [Wed, 17 Jan 2024 10:55:46 +0000 (12:55 +0200)]
cmd: bootmenu: rename U-Boot console to Exit
It seems that the U-Boot console entry of the bootmenu has lost
its original meaning. Now, even if it is chosen, the probability
that you will enter the actual U-Boot console is quite low.
Boot env, bootflow, bootcommand script may appear, but not the
actual console. Hence, let's remove ambiguity and name this
entry by what it actually does: 'Exit' the bootmenu.
Max Krummenacher [Wed, 17 Jan 2024 10:16:49 +0000 (11:16 +0100)]
board: verdin-am62: set cpu core voltage depending on speed grade
Speed grade T requires the VDD_CORE voltage to be 0.85V if using
the maximum core frequency.
Speed grades G, K, S allow the VDD_CORE voltage to be 0.75V up to the
maximum core frequency but allow to run at 0.85V.
For efficiency in manufacturing and code maintenance we use 0.85V for
the PMIC defaults and device tree settings and dynamically adjust the
voltage in the PMIC and device tree to 0.75V for lower speed SKU to
gain more than 100mW power consumption reduction.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Max Krummenacher [Wed, 17 Jan 2024 10:16:47 +0000 (11:16 +0100)]
arm: mach-k3: am62: move device identification accessor functions to header
mach-k3/am625_fdt.c does fdt fixup depending on fields in the device
identification register. Move the accessors to the device identification
register as inline functions into the am62_hardware.h header, so that
they can be used for other functionality.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
In the #else path ENOSYS is used, however linux/errno.h is not included.
If errno.h has not been included already the compiler errors out even
if the inline function is not referenced.
Make those headers self contained.
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com> Reviewed-by: Francesco Dolcini <francesco.dolcini@toradex.com> Reviewed-by: Tom Rini <trini@konsulko.com>
The value of CONFIG SYS_MAXARGS limits the usability of the 'for' command.
The current default of 16 is too low for some use case. Cf.
https://bugs.launchpad.net/snap-core18/+bug/1910094
Increase the default to 64.
Reported-by: Dave Jones <dave.jones@canonical.com> Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
board: ti: common: board_detect: Fix EEPROM offset read for 1-byte
EEPROM detection logic in ti_i2c_eeprom_get() involves reading
the total size and the 1-byte size with an offset 1. The commit 9f393a2d7af8 ("board: ti: common: board_detect: Fix EEPROM read
quirk for 2-byte") that attempts to fix this uses a wrong pointer to
compare.
The value with one offset is read into offset_test, but the pointer
used to match was still ep, resulting in an invalid comparison of the
values. The intent is to identify bad 2-byte addressing eeproms that
get stuck on the successive reads.
Fixes: 9f393a2d7af8 (board: ti: common: board_detect: Fix EEPROM read quirk for 2-byte) Signed-off-by: Prasanth Babu Mantena <p-mantena@ti.com> Tested-by: Matwey V. Kornilov <matwey.kornilov@gmail.com> Reviewed-by: Neha Malcom Francis <n-francis@ti.com>
Tom Rini [Mon, 22 Jan 2024 18:30:23 +0000 (13:30 -0500)]
Merge patch series "omap3: Make SPL_OMAP3_ID_NAND depend on NAND_OMAP_GPMC"
This series results in making it such that with CONFIG_MTD disabled we
then do not prompt the user for a number of memory technology device
related options and so clean up our configuration menu / display.
Tom Rini [Wed, 10 Jan 2024 18:46:10 +0000 (13:46 -0500)]
mtd: Make CONFIG_MTD be the gate symbol for the menu
The help for CONFIG_MTD explains that it needs to be enabled for various
things like NAND, etc to be available. It however then doesn't enforce
this dependency and so if you have none of these systems present you
still need to disable a number of options. Fix this by making places
that select/imply one type of flash, but did not do the same, also do
this for "MTD". Make boards which hadn't been enabling MTD already but
need it now, do so. In a few places, disable CONFIG_CMD_MTDPARTS as it
wasn't previously enabled but was now being implied.
Tom Rini [Wed, 10 Jan 2024 18:46:09 +0000 (13:46 -0500)]
cmd/flash: Make this default y for CFI and NOR only
This command is only useful on CFI and NOR type flashes and not others.
Update the dependency so that it's not enabled by default in other
cases. This will lead to a number of platforms no longer building this
command, where it was not useful.
Tom Rini [Wed, 10 Jan 2024 18:46:08 +0000 (13:46 -0500)]
env: Make ENV_IS_IN_SPI_FLASH depend on SPI flash being present
In order for our environment to be present on SPI flash we need to
depend not on the symbol for a SPI controller but rather that SPI flash
of some sort is present. Update the dependencies.
Tom Rini [Wed, 10 Jan 2024 18:46:06 +0000 (13:46 -0500)]
omap3: Make SPL_OMAP3_ID_NAND depend on NAND_OMAP_GPMC
This specific bit logic is used to determine what NAND chip is present
on a board in order to then know what revision of the board we have and
so what DDR chips are present. We can only do this if we have a NAND
chip, and so we will have NAND_OMAP_GPMC enabled.
Shantur Rathore [Sat, 9 Dec 2023 18:10:56 +0000 (18:10 +0000)]
common: usb-hub: Reset hub port before scanning
Currently when a hub is turned on, all the ports are powered on.
This works well for hubs which have individual power control.
For the hubs without individual power control this has no effect.
Mostly in these scenarios the hub port is powered before the USB
controller is enabled, this can lead to some devices in unexpected
state.
With this patch, we explicitly reset the port while powering up hub
This resets the port for hubs without port power control and has
no effect on hubs with port power control as the port is still off.
Before this patch AMicro AM8180 based NVME to USB adapter won't be
detected as a USB3.0 Mass Storage device but with this it works as
expected.
Tested working after this patch:
1. AMicro AM8180 based NVME to USB Adapter
2. Kingston DataTraveler 3.0
3. GenesysLogic USB3.0 Hub
The drives were tested while connected directly and via the hub.
Signed-off-by: Shantur Rathore <i@shantur.com> Reviewed-by: Marek Vasut <marex@denx.de>
Tom Rini [Mon, 22 Jan 2024 14:47:52 +0000 (09:47 -0500)]
Merge tag 'u-boot-imx-master-20240122' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx
- Allow i.MX8M Plus DHCOM to operate in overdrive mode.
- Allow i.MX8M Plus eDM SBC to operate in overdrive mode.
- Enable the 'kaslrseed' command on DH i.MX8M Plus DHCOM.
- Select LTO by default on i.MX8M.
- Convert pico-dwarf/hobbit-imx6ul to CONFIG_DM_SERIAL.
- Fix 'reset' command on wandboard.
Clearfog GTR has an assembly option for a SATA connector, CON18.
It shares the serdes with mini-pcie connector CON3.
Add new kconfig option to select betweenata and pci, defaulting to pci
as it was previously configured in board-file.
Clearfog GTR connects eth2 / serdes 1 to a 2.5Gbps capable ethernet
switch port. Linux already configures a fixed-link at speed 2500 from
device-tree.
Upgrade serdes 1 rate to 3.125Gbps to support a 2.5Gbps network link on
Clearfog GTR.
Marek Vasut [Sat, 20 Jan 2024 00:35:58 +0000 (01:35 +0100)]
ARM: imx: Enable kaslrseed command on DH i.MX8M Plus DHCOM
Linux 6.6.y with KASLR enabled would print the following message on boot:
"
KASLR disabled due to lack of seed
"
Enable the 'kaslrseed' command so a random number seed can be pulled
from CAAM and inserted into the /chosen node 'kaslr-seed' property of
Linux kernel DT before boot, thus letting KASLR work properly.
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@denx.de>
Marek Vasut [Fri, 19 Jan 2024 16:08:32 +0000 (17:08 +0100)]
ARM: imx: Configure GIC clock parent on Data Modul i.MX8M Plus eDM SBC
The CONFIG_SPL_BOARD_INIT lets SPL common code call spl_board_init()
during the SPL start up. On this particular system, spl_board_init()
is used to reconfigure GIC clock parent to PLL2 500M, which is the
configuration expected by the Linux kernel. Enable SPL_BOARD_INIT
and fill in the GIC clock configuration code.
Set GIC clock to 500 MHz for OD VDD_SOC. Kernel driver does not
allow to change it. Should set the clock after PMIC setting done.
Default is 400 MHz (system_pll1_800m with div = 2) set by ROM for
ND VDD_SOC.
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@denx.de>
Marek Vasut [Fri, 19 Jan 2024 16:07:54 +0000 (17:07 +0100)]
ARM: imx: Enable SPL_BOARD_INIT on DH i.MX8M Plus DHCOM
The CONFIG_SPL_BOARD_INIT lets SPL common code call spl_board_init()
during the SPL start up. On this particular system, spl_board_init()
is used to reconfigure GIC clock parent to PLL2 500M, which is the
configuration expected by the Linux kernel. Enable SPL_BOARD_INIT .
Set GIC clock to 500 MHz for OD VDD_SOC. Kernel driver does not
allow to change it. Should set the clock after PMIC setting done.
Default is 400 MHz (system_pll1_800m with div = 2) set by ROM for
ND VDD_SOC.
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Fabio Estevam <festevam@denx.de>
Fabio Estevam [Thu, 18 Jan 2024 15:06:39 +0000 (12:06 -0300)]
imx8m: Enable LTO by default
In an attempt to select ARMV8_SPL_EXCEPTION_VECTORS, the SPL size
could not fit into the internal SRAM of some imx8m targets:
aarch64: + imx8mm_phg
+aarch64-linux-ld.bfd: u-boot-spl section `__u_boot_list' will not fit in region `.sram'
+aarch64-linux-ld.bfd: region `.sram' overflowed by 1824 bytes
Select LTO to prevent that.
Signed-off-by: Fabio Estevam <festevam@denx.de> Reviewed-by: Marek Vasut <marex@denx.de>
Dinesh Maniyam [Fri, 15 Dec 2023 07:21:51 +0000 (15:21 +0800)]
arm: dts: agilex: Increase reserved memory size to 32MB
The reserved space is extended to 32MB in Linux kernel because
additional space is needed for authorization execution of JIC/RBF file.
U-Boot required to align with Linux.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com> Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Dinesh Maniyam [Fri, 15 Dec 2023 07:15:19 +0000 (15:15 +0800)]
clk: altera: n5x: Fix MEMCLKMGR_EXTCNTRST_C0CNTRST to bit(0)
MEMCLKMGR_EXTCNTRST_C0CNTRST register defined as BIT[0] in documentation
but it is wrongly defined as BIT[7] in u-boot code. This register is used
to hold associated pingpong counter in reset
while PLL and 5:1 mux configuration is changed.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com> Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Dinesh Maniyam [Thu, 7 Dec 2023 07:46:02 +0000 (15:46 +0800)]
arm: socfpga: stratix10: SPI clock support
This patch is to add SPI clock support for stratix10. Get clock rate
function always returning 0 because the DW-SPI driver get the rate
from clock node in dts but Stratix10 does not support device tree
clock node.To overcome this spi will get the clock_rate directly
from spi clock controller override the weaker function.
Signed-off-by: Dinesh Maniyam <dinesh.maniyam@intel.com> Reviewed-by: Tien Fong Chee <tien.fong.chee@intel.com>
Tom Rini [Sun, 21 Jan 2024 14:11:33 +0000 (09:11 -0500)]
Merge tag 'efi-2024-04-rc1-3' of https://source.denx.de/u-boot/custodians/u-boot-efi
Pull request efi-2024-04-rc1-3
Documentation:
* correct documentation of part_get_bootable()
* remove duplicate word "has" in UEFI documentation
UEFI:
* rename check_disk_has_default_file function
* auto-generate boot option for each blkio device
* auto-generate removable media boot option first
* avoid pointer access after calling efi_delete_handle
* create common function to free struct efi_disk_obj
* return immediately in UCLASS_EFI_LOADER removal
Masahisa Kojima [Fri, 19 Jan 2024 00:45:45 +0000 (09:45 +0900)]
efi_loader: create common function to free struct efi_disk_obj
Current error handling of creating raw disk/partition has
following issues.
- duplicate free for EFI handle, EFI handle is already freed
in efi_delete_handle()
- missing free for struct efi_device_path and
struct efi_simple_file_system_protocol in some error paths
To address those issues, this commit creates the common function
to free the struct efi_disk_obj resources and calls it in case
of error.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Masahisa Kojima [Fri, 19 Jan 2024 00:45:44 +0000 (09:45 +0900)]
efi_loader: avoid pointer access after calling efi_delete_handle
efi_delete_handle() calls efi_purge_handle(), then it finally
frees the EFI handle.
Both diskobj and handle variables in efi_disk_remove() have
the same pointer, we can not access diskobj->dp after calling
efi_delete_handle().
This commit saves the struct efi_device_path pointer before
calling efi_delete_handle(). This commit also fixes the
missing free for volume member in struct efi_disk_obj.
This commit also removes the container_of() calls, and
adds the TODO comment of missing efi_close_protocol() call
for the parent EFI_BLOCK_IO_PROTOCOL.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Masahisa Kojima [Fri, 12 Jan 2024 00:19:23 +0000 (09:19 +0900)]
efi_loader: auto-generate removable media boot option first
This commit auto-generates the boot option for removable
block io devices followed by fixed block io devices.
This is what EDK II reference implementation does.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Masahisa Kojima [Fri, 12 Jan 2024 00:19:22 +0000 (09:19 +0900)]
efi_loader: auto-generate boot option for each blkio device
Current efibootmgr auto-generates the boot option for all
disks and partitions installing EFI_SIMPLE_FILE_SYSTEM_PROTOCOL,
while EDK II reference implementation auto-generates the boot option
for all devices installing EFI_BLOCK_IO_PROTOCOL with
eliminating logical partitions.
This commit modifies the efibootmgr to get aligned to EDK II.
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Masahisa Kojima [Fri, 12 Jan 2024 00:19:21 +0000 (09:19 +0900)]
efi_loader: rename check_disk_has_default_file function
check_disk_has_default_file() function checks if the
architecture-specific default file exists on the block
device, and fills the default file device path if it exists.
Rename the function name to fill_default_file_path().
Signed-off-by: Masahisa Kojima <masahisa.kojima@linaro.org> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
part: correct documentation of part_get_bootable()
We have to use 'Return:' to render the description of the return value in
the HTML documentation.
Fixes: f55aa4454ac3 ("part: Add a fallback for part_get_bootable()") Fixes: dcffa4428d03 ("part: Add a function to find the first bootable partition") Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Roger Quadros [Fri, 12 Jan 2024 12:49:50 +0000 (14:49 +0200)]
arm: dts: k3-j721e-beagleboneai64: Fix USB operation
Without correct SERDES MUX and Lane control settings
USB0 will be broken. Set the MUX and Lane control devices
to be auto probed so they are configured correctly.
Roger Quadros [Fri, 12 Jan 2024 12:49:49 +0000 (14:49 +0200)]
arm: dts: k3-j721e: Fix USB0 operation
Without correct SERDES MUX and Lane control settings
USB0 will be broken. Set the MUX and Lane control devices
to be auto probed so they are configured correctly.
Fixes: 69b19ca67bcb ("arm: dts: k3-j721e: Sync with v6.6-rc1") Signed-off-by: Roger Quadros <rogerq@kernel.org>
Marek Vasut [Sat, 13 Jan 2024 17:57:27 +0000 (18:57 +0100)]
ARM: stm32: Set stdio to serial on DH STM32MP15xx DHSOM
In case CONSOLE_MUX and SYS_CONSOLE_IS_IN_ENV are enabled, the console
stdin, stdout, stderr must be defined in environment. Define the default
settings to fix the following warning on boot:
"
In: No input devices available!
Out: No output devices available!
Err: No error devices available!
"
Sort the default environment as well.
Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Tom Rini [Fri, 19 Jan 2024 13:46:47 +0000 (08:46 -0500)]
Merge branch '2024-01-18-assorted-fixes'
- A number of OS boot related cleanups, a number of TI platform
fixes/cleanups, SMBIOS fixes, tweak get_maintainers.pl to report me
for more places, fix the "clean the build" pytest and add a bootstage
pytest, fix PKCS11 URI being omitted in some valid cases, make an iommu
problem easier to debug on new platforms, nvme and pci improvements,
refactor image-host code a bit, fix a typo in env setting, add a missing
dependency for CMD_LICENSE, and correct how we call getchar() in some
places.
Patrick Delaunay [Mon, 15 Jan 2024 14:05:56 +0000 (15:05 +0100)]
arm: Rename STM32MP13x
CONFIG options must not use lower-case letter. Convert this and related
ones to upper case.
Signed-off-by: Simon Glass <sjg@chromium.org> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Igor Opaniuk <igor.opaniuk@foundries.io>
Patrick Delaunay [Mon, 15 Jan 2024 14:05:54 +0000 (15:05 +0100)]
board: st: stm32mp2: add checkboard
Implement the weak function checkboard to identify the used board with
compatible in device tree for the support of stm32mp2 STMicroelectronics
boards.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Patrick Delaunay [Mon, 15 Jan 2024 14:05:53 +0000 (15:05 +0100)]
stm32mp: activate the command stboard for stm32mp25 boards
Activate the command stboard for stm32mp25 STMicroelectronics boards,
add the default used OTP identifier and the associated board identifier:
- stm32mp25xx-ev1 = MB1936
- stm32mp25xx-dk = MB1605
Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com> Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Patrick Delaunay [Mon, 15 Jan 2024 14:05:51 +0000 (15:05 +0100)]
smt32mp: add setup_mac_address for stm32mp25
Add a function setup_mac_address() to update the MAC address from the
default location in OTP for stm32mp2 platform.
The max number of OTP for MAC address is increased to 8 for STM32MP25,
defined with get_eth_nb() and checked in setup_mac_address.
The MAC address FF:FF:FF:FF:FF:FF, the broadcast ethaddr, is a invalid
value used for unused MAC address slot in OTP, for example for board
with STM32MP25x part number allows up to 5 ethernet ports but it is not
supported by the hardware, without switch; the associated variable
"enetaddr%d" is not created.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Patrick Delaunay [Mon, 15 Jan 2024 14:05:46 +0000 (15:05 +0100)]
stm32mp: bsec: add driver data
Add driver data in BSEC driver to test presence of OP-TEE TA,
mandatory for STM32MP13 family and prepare the support of new device
with more OTP than 95.
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com> Signed-off-by: Patrick Delaunay <patrick.delaunay@foss.st.com>
Patrick Delaunay [Mon, 15 Jan 2024 14:05:44 +0000 (15:05 +0100)]
arm64: dts: st: add bsec support to stm32mp25
Add BSEC support to STM32MP25 SoC family with SoC information:
- RPN = Device part number (BSEC_OTP_DATA9)
- PKG = package data register (Bits 2:0 of BSEC_OTP_DATA122)
Tom Rini [Fri, 19 Jan 2024 13:02:58 +0000 (08:02 -0500)]
Merge tag 'u-boot-rockchip-20240119' of https://source.denx.de/u-boot/custodians/u-boot-rockchip
- Add board: rk3328 FriendlyARM NanoPi R2C Plus, rk3588 Turing RK1 SoM;
- Enable SPI boot for rk3588 and rk3528;
- Set boot device in SPL as common code;
- other misc fixes;
Quentin Schulz [Thu, 18 Jan 2024 13:56:00 +0000 (14:56 +0100)]
rockchip: rk3128: remove noop file
arch_cpu_init is already returning 0 in its weak definition in
common/board_f.c so let's just remove the file entirely since nothing
else is done in it.
Quentin Schulz [Thu, 18 Jan 2024 13:55:58 +0000 (14:55 +0100)]
rockchip: find U-boot proper boot device by inverting the logic that sets it
BOOT_DEVICE_* is set by spl_node_to_boot_device() depending on the block
device number associated with the MMC device the SPL used to load U-Boot
proper from. It is NOT related to the mmc alias in the Device Tree.
For SPI flashes, all SPI flashes will return BOOT_DEVICE_SPI so there's
currently no way to know from which one the SPL loaded U-Boot proper
from. Therefore, let's just find the first valid candidate in
/chosen/u-boot,spl-boot-order that is a SPI flash and return that path.
This is a best effort.
While the original implementation may have worked, using the exact same
mechanism but in inverted fashion makes it less likely to have
surprising corner-cases or side-effects.
A nice side-effect is that all existing and future Rockchip SoCs now
automatically have their /chosen/u-boot,spl-boot-device set.
Quentin Schulz [Thu, 18 Jan 2024 13:55:57 +0000 (14:55 +0100)]
rockchip: factor out spl_perform_fixups into common spl-boot-order
All SoCs are susceptible to wanting to know which storage medium was
used to load U-Boot SPL. So instead of reimplementing the same functions
in SoCs over and over again (here just rk3399 and px30 but rk3588 is
coming), let's just put all this in common into spl-boot-order.c
allowing to support a new SoC just by defining the spl_boot_devices
array in the appropriate SoC file.
Note that spl_perform_fixups() now calls spl_image_fdt_addr() to get the
address of the fdt instead of directly reading the
spl_image_info->fdt_addr member, because that member is not guaranteed
to be present (guarded with compile flags). This is essential because we
move the logic away from px30 and rk3399 which had those compile flags
enabled to code run for all Rockchip SoCs.
Quentin Schulz [Thu, 18 Jan 2024 13:55:56 +0000 (14:55 +0100)]
rockchip: px30: simplify logic for getting SPL boot medium DT node
In preparation of moving spl_perform_fixups to spl-boot-order.c, let's
simplify the logic around mapping the BOOT_DEVICE_x enum index to a DT
node by using an instantiated array of chars instead of creating a new
data structure on the fly.
This will make it easier to factor out the code handling the SPL boot
medium detection by having spl_decode_boot_device common to all SoCs.
projects / u-boot.git / log
