William Zhang [Mon, 22 Aug 2022 18:19:45 +0000 (11:19 -0700)]
arm: bcmbca: remove bcm63158 support under CONFIG_ARCH_BCM63158
Now that BCM63158 is supported under CONFIG_ARCH_BCMBCA and
CONFIG_BCM63158, remove the original ARCH_BCM63158 support and migrate
configuration settings.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
William Zhang [Mon, 22 Aug 2022 18:19:44 +0000 (11:19 -0700)]
arm: bcmbca: add bcm63158 SoC support under CONFIG_ARCH_BCMBCA
BCM63158 is a Broadcom B53 based DSL Gateway SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family. Like other
Broadband SoC, this patch adds it under CONFIG_BCM63158 chip
config and CONFIG_ARCH_BCMBCA platform config.
This initial support includes a bare-bone implementation and dts with
CPU subsystem, memory and ARM PL011 uart. This SoC is supported in the
linux-next git repository so the dts and dtsi files are copied from
linux.
The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Philippe Reynes <philippe.reynes@softathome.com>
William Zhang [Sat, 6 Aug 2022 01:34:03 +0000 (18:34 -0700)]
arm: bcmbca: add bcm4908 SoC support
BCM4908 is a Broadcom B53 based WLAN AP router SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added
under ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.
This SoC is supported in the linux git repository so the dts and dtsi
files are stripped down version of linux copies with mininum blocks
needed by u-boot.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
William Zhang [Sat, 6 Aug 2022 01:34:02 +0000 (18:34 -0700)]
arm: bcmbca: add bcm6813 SoC support
BCM6813 is a Broadcom B53 based PON and WLAN AP router SoC. It is part
of the BCA (Broadband Carrier Access origin) chipset family so it's
added under ARCH_BCMBCA platform. This initial support includes a
bare-bone implementation and dts with CPU subsystem, memory and ARM
PL011 uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
William Zhang [Sat, 6 Aug 2022 01:34:01 +0000 (18:34 -0700)]
arm: bcmbca: add bcm4912 SoC support
BCM4912 is a Broadcom B53 based WLAN AP router SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.
This SoC is supported in the linux-next git repository so the dts
and dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
William Zhang [Sat, 6 Aug 2022 01:34:00 +0000 (18:34 -0700)]
arm: bcmbca: add bcm63146 SoC support
BCM63146 is a Broadcom B53 based DSL Broadband SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.
Signed-off-by: William Zhang <william.zhang@broadcom.com> Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
William Zhang [Sat, 6 Aug 2022 01:25:13 +0000 (18:25 -0700)]
arm: bcmbca: add bcm63138 SoC support
BCM63138 is an ARM A9 based DSL Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory, ARM A9 global timer
and Broadcom uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are stripped down version of linux copies with mininum blocks
needed by u-boot.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there to the console.
This patch applies on top of the my previous patch [1].
William Zhang [Mon, 1 Aug 2022 18:39:25 +0000 (11:39 -0700)]
arm: bcmbca: add bcm63148 SoC support
BCM63148 is an Broadcom B15 based DSL Broadband SoC. It is part of the
BCA (Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
William Zhang [Mon, 1 Aug 2022 18:39:24 +0000 (11:39 -0700)]
arm: bcmbca: add bcm6756 SoC support
BCM6756 is an ARM A7 based WLAN Gateway and Access Point Broadband SoC.
It is part of the BCA(Broadband Carrier Access origin) chipset family so
it's added under ARCH_BCMBCA platform. This initial support includes a
bare-bone implementation and dts with CPU subsystem, memory and ARM
PL011 uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux.
The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
William Zhang [Mon, 1 Aug 2022 18:39:23 +0000 (11:39 -0700)]
arm: bcmbca: add bcm6878 SoC support
BCM6878 is an ARM A7 based PON Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011
uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
William Zhang [Mon, 1 Aug 2022 18:39:22 +0000 (11:39 -0700)]
arm: bcmbca: add bcm6846 SoC support
BCM6846 is an ARM A7 based PON Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and Broadcom uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.
The u-boot image can be loaded from flash or network to the entry point
address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
William Zhang [Mon, 1 Aug 2022 18:39:21 +0000 (11:39 -0700)]
arm: bcmbca: add bcm63178 SoC support
BCM63178 is an ARM A7 based DSL Broadband SoC. It is part of the BCA
(Broadband Carrier Access origin) chipset family so it's added under
ARCH_BCMBCA platform. This initial support includes a bare-bone
implementation and dts with CPU subsystem, memory and ARM PL011 uart.
This SoC is supported in the linux-next git repository so the dts and
dtsi files are copied from linux with minor fix-up that needs to be
upstreamed to linux as well.
The u-boot image can be loaded from flash or network to the entry
point address in the memory and boot from there.
Signed-off-by: William Zhang <william.zhang@broadcom.com>
Tom Rini [Sun, 30 Oct 2022 21:16:35 +0000 (17:16 -0400)]
Merge tag 'video-20221030' of https://source.denx.de/u-boot/custodians/u-boot-video
- fix [hv]sync active vs back porch in dw_mipi_dsi
- simplefb rotation support
- support splash as raw image from MMC
- enhancements to Truetype console (multiple fonts and sizes)
- drop old LCD support
Simon Glass [Tue, 18 Oct 2022 12:24:16 +0000 (06:24 -0600)]
video: Split SPLASH_SCREEN_ALIGN from bmp command
The bmp command already has a way to centre the image. Using this CONFIG
option to also centre it makes it impossible to control where images are
placed on the screen. Drop the extra check.
Simon Glass [Thu, 6 Oct 2022 14:36:11 +0000 (08:36 -0600)]
video: Refactor to allow more than one font size
At present the truetype console supports only a single font and size. It
is useful to be able to support different combinations. As a first step,
move the metrics into there own structure and allow having multiple
metrics.
Simon Glass [Thu, 6 Oct 2022 14:36:03 +0000 (08:36 -0600)]
video: Move console colours to the video uclass
At present these are attached to vidconsole which means that the video
uclass requires that a console is enabled. This is not the intention.
The colours are a reasonable way of indexing common colours in any case,
so move them to the video uclass instead.
Rename vid_console_color() to video_index_to_colour() now that it is more
generic. Also fix the inconsistent spelling in these functions.
John Keeping [Wed, 7 Sep 2022 11:06:32 +0000 (12:06 +0100)]
video: dw_mipi_dsi: fix [hv]sync active vs back porch
The wrong fields are pulled out of the timings here so the values
programmed into the DSI_VID_HSA_LINES/DSI_VID_HBP_LINES and
DSI_VID_VSA_LINES/DSI_VID_VBP_LINES registers are swapped.
Use the right fields so that the correct values are programmed.
Michal Suchanek [Wed, 12 Oct 2022 19:58:09 +0000 (21:58 +0200)]
dm: core: Do not stop uclass iteration on error
When probing a device fails NULL pointer is returned, and following
devices in uclass list cannot be iterated. Skip to next device on error
instead.
With that the only condition under which these simple iteration
functions return error is when the dm is not initialized at uclass_get
time. This is not all that interesting, change return type to void.
Fixes: 6494d708bf ("dm: Add base driver model support") Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Michal Suchanek [Wed, 12 Oct 2022 19:58:08 +0000 (21:58 +0200)]
dm: treewide: Do not use the return value of simple uclass iterator
uclass_first_device/uclass_next_device return value will be removed,
don't use it.
With the current implementation dev is equivalent to !ret. It is
redundant to check both, ret check can be replaced with dev check, and
ret check inside the iteration is dead code.
Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 31 Jul 2022 02:57:11 +0000 (20:57 -0600)]
fdt: Move to setuptools
The distutils package is deprecated. The upstream libfdt repo uses
setuptools for building the pylibfdt module, so bring in that code,
suitably modified for U-Boot. Also bring in the README.
The modifications include setting the version correctly, making use of
the environment variables provided by the Makefile and various tweaks
to the directories.
Note that the version omits the minus character at the start of
EXTRAVERSION, since this creates a warning. The build is really just used
within U-Boot itself, so it doesn't matter too much if the version matches
upstream, or exactly matches U-Boot.
Sughosh Ganu [Tue, 18 Oct 2022 08:47:25 +0000 (14:17 +0530)]
thermal: sandbox: Enable thermal uclass for sandbox64 variant
The sandbox64 variant is currently building the sandbox thermal driver
but not the corresponding uclass driver. This results in the sandbox64
variant not booting with the test device tree. Enable building the
thermal uclass for the sandbox64 variant as well.
Also enable the temperature command to allow the test to be run on the
sandbox64 variant.
Signed-off-by: Sughosh Ganu <sughosh.ganu@linaro.org> Reviewed-by: Simon Glass <sjg@chromium.org>
Michal Suchanek [Thu, 13 Oct 2022 20:43:41 +0000 (22:43 +0200)]
libfdt: Fix build with python 3.10
Python 3.10 requires defining PY_SSIZE_T_CLEAN. This will be fixed in
swig 4.10 but it is not clear when it will be released. There was a
warning since python 3.8.
Michal Suchanek [Thu, 13 Oct 2022 20:39:51 +0000 (22:39 +0200)]
libfdt: Fix invalid version warning
python does not like the u-boot- prefix in the version, drop it.
/usr/lib/python3.10/site-packages/setuptools/dist.py:544: UserWarning:
The version specified ('u-boot-2022.10') is an invalid version, this may
not work as expected with newer versions of setuptools, pip, and PyPI.
Please see PEP 440 for more details.
Signed-off-by: Michal Suchanek <msuchanek@suse.de> Reviewed-by: Simon Glass <sjg@chromium.org>
Simon Glass [Sun, 9 Oct 2022 03:33:20 +0000 (21:33 -0600)]
dm: core: Fix lists_bind_fdt() using non-existent of_match
The call to device_bind_with_driver_data() passes id->data but if
the entry has no of_match then the id has not been set by the selected
driver.
Normally this passes unnoticed since a previous driver likely had an
of_match value, so the id is set to that. Of course it is not correct
to pass the id->data from a different driver.
With clang-14 the driver ordering is such that the id is never actually
set in the 'bind /usb@1 usb_ether' line in test_bind_unbind_with_node()
thus causing a crash.
Fix this by passing 0 if the of_match for a driver does not exist.
Matching anything that just happens to have the sought-for label as a
prefix is wrong. For example, if the board designer has designated 10
lines for debug purposes, named "debug1" through "debug10", and we are
looking up "debug1", if debug10 happens to be met first during the
iteration we'd wrongly return that.
In theory, this can break existing users that could rely on this
quirk, but OTOH keeping the current broken semantics can cause a lot
of grief for people hitting this in the future and not understanding
why they don't find the line they expect. Considering how few in-tree
defconfigs currently set DM_GPIO_LOOKUP_LABEL (ignoring sandbox, only
four "real" boards), let's fix it before the use becomes more
widespread.
There are two problems with both strcmp and strncmp:
(1) The C standard is clear that the contents should be compared as
"unsigned char":
The sign of a nonzero value returned by the comparison functions
memcmp, strcmp, and strncmp is determined by the sign of the
difference between the values of the first pair of characters (both
interpreted as unsigned char) that differ in the objects being
compared.
(2) The difference between two char (or unsigned char) values can
range from -255 to +255; so that's (due to integer promotion) the
range of values we could get in the *cs-*ct expressions, but when that
is then shoe-horned into an 8-bit quantity the sign may of course
change.
The impact is somewhat limited by the way these functions
are used in practice:
- Most of the time, one is only interested in equality (or for
strncmp, "starts with"), and the existing functions do correctly
return 0 if and only if the strings are equal [for strncmp, up to
the given bound].
- Also most of the time, the strings being compared only consist of
ASCII characters, i.e. have values in the range [0, 127], and in
that case it doesn't matter if they are interpreted as signed or
unsigned char, and the possible difference range is bounded to
[-127, 127] which does fit the signed char.
For size, one could implement strcmp() in terms of strncmp() - just
make it "return strncmp(a, b, (size_t)-1);". However, performance of
strcmp() does matter somewhat, since it is used all over when parsing
and matching DT nodes and properties, so let's find some other place
to save those ~30 bytes.
- Reduce memory usage in SPL in some cases, clarify some standalone API
license issues, fix a Kconfig dependency, pin to a specific version of
python setuptools for now, fix a signing problem in mkimage and add a
memory uclass.
Roger Quadros [Thu, 20 Oct 2022 13:30:49 +0000 (16:30 +0300)]
memory: Add TI GPMC driver
The GPMC is a unified memory controller dedicated for interfacing
with external memory devices like
- Asynchronous SRAM-like memories and ASICs
- Asynchronous, synchronous, and page mode burst NOR flash
- NAND flash
- Pseudo-SRAM devices
This driver will take care of setting up the GPMC based on
the settings specified in the Device tree and then
probe its children.
Roger Quadros [Thu, 20 Oct 2022 13:30:48 +0000 (16:30 +0300)]
dt/bindings: memory: Add bindings for TI GPMC driver
GPMC stands for General Purpose Memory Controller and it is
present on many Texas Instruments SoCs.
It supports a number of Asynchronous and Synchronous interfaces
and has various settings to configure the bus interface.
The DT bindings define all the various GPMC settings.
As the GPMC supports multiple devices on the bus, each
device is represented as a child and the respective
GPMC settings are situated there. (see ti,gpmc-child.yaml)
These binding docs are picked up from the Linux kernel.
projects / u-boot.git / log
![2 years agovideo: dw_mipi_dsi: fix [hv]sync active vs back porch](/img/sics.gif?p=u-boot.git;a=commit;h=720927249788826e0e72c3c6ee3b696a0188ed4d){kind=link}
