From: Michal Simek <michal.simek@xilinx.com>
Date: Wed, 23 Feb 2022 15:17:40 +0000 (+0100)
Subject: arm64: zynqmp: Switch to ethernet-phy-id in kv260
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=ff7944829497ce94feb62268d0652487ea873ac2;p=u-boot.git

arm64: zynqmp: Switch to ethernet-phy-id in kv260

Use ethernet-phy-id compatible string to properly describe phy reset on
kv260 boards. Previous description wasn't correct because reset was done
for mdio bus to operate and it was in this case used for different purpose
which was eth phy reset. With ethernet-phy-id phy reset happens only for
the phy via phy framework.

Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Link: https://lore.kernel.org/r/73b64f1a2b873b4e26bd2b365364bdf313794ae2.1645629459.git.michal.simek@xilinx.com
---

diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
index f58ad69be3..9445dace73 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revA.dts
@@ -168,16 +168,18 @@
 	mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-		reset-delay-us = <2>;
 
 		phy0: ethernet-phy@1 {
 			#phy-cells = <1>;
 			reg = <1>;
+			compatible = "ethernet-phy-id2000.a231";
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <100>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
diff --git a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
index 7236e03a5a..6ea950a13f 100644
--- a/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
+++ b/arch/arm/dts/zynqmp-sck-kv-g-revB.dts
@@ -155,16 +155,18 @@
 	mdio: mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
-		reset-delay-us = <2>;
 
 		phy0: ethernet-phy@1 {
 			#phy-cells = <1>;
 			reg = <1>;
+			compatible = "ethernet-phy-id2000.a231";
 			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
 			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
 			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <100>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
 		};
 	};
 };