From: Michal Simek Date: Fri, 20 Mar 2020 07:59:02 +0000 (+0100) Subject: arm64: zynqmp: Move timeout for clock propagation below psu_init X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=f8451f144e3d8fe704bd78416e93a68fd7781123;p=u-boot.git arm64: zynqmp: Move timeout for clock propagation below psu_init Delay required for clock propagation is tighly coupled with initialization done in psu_init(). That's why call it also for u-boot proper with CONFIG_ZYNQMP_PSU_INIT_ENABLED enabled. Signed-off-by: Michal Simek --- diff --git a/arch/arm/mach-zynqmp/spl.c b/arch/arm/mach-zynqmp/spl.c index c53945e57f..68df0a79c4 100644 --- a/arch/arm/mach-zynqmp/spl.c +++ b/arch/arm/mach-zynqmp/spl.c @@ -19,9 +19,6 @@ void board_init_f(ulong dummy) { board_early_init_f(); board_early_init_r(); - - /* Delay is required for clocks to be propagated */ - udelay(1000000); } static void ps_mode_reset(ulong mode) diff --git a/board/xilinx/zynqmp/zynqmp.c b/board/xilinx/zynqmp/zynqmp.c index 04fd3bd0a4..eb1bc0861e 100644 --- a/board/xilinx/zynqmp/zynqmp.c +++ b/board/xilinx/zynqmp/zynqmp.c @@ -326,6 +326,9 @@ int board_early_init_f(void) ret = psu_init(); if (ret) return ret; + + /* Delay is required for clocks to be propagated */ + udelay(1000000); #endif #ifdef CONFIG_DEBUG_UART