From: Patrice Chotard <patrice.chotard@st.com>
Date: Tue, 4 Dec 2018 13:11:36 +0000 (+0100)
Subject: serial: serial_stm32: Add reset support
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=f828fa4d822b61de624a6e8db288d3778a69ee7a;p=u-boot.git

serial: serial_stm32: Add reset support

In some cases, UART is configured by early boot stage.
To be sure of the initial state of UART and to avoid
spurious chars on console, reset the serial block before
configuring it.

Signed-off-by: Patrice Chotard <patrice.chotard@st.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
---

diff --git a/drivers/serial/serial_stm32.c b/drivers/serial/serial_stm32.c
index 31b43ee88d..e31c87b9ac 100644
--- a/drivers/serial/serial_stm32.c
+++ b/drivers/serial/serial_stm32.c
@@ -7,6 +7,7 @@
 #include <common.h>
 #include <clk.h>
 #include <dm.h>
+#include <reset.h>
 #include <serial.h>
 #include <watchdog.h>
 #include <asm/io.h>
@@ -171,6 +172,7 @@ static int stm32_serial_probe(struct udevice *dev)
 {
 	struct stm32x7_serial_platdata *plat = dev_get_platdata(dev);
 	struct clk clk;
+	struct reset_ctl reset;
 	int ret;
 
 	plat->uart_info = (struct stm32_uart_info *)dev_get_driver_data(dev);
@@ -185,6 +187,13 @@ static int stm32_serial_probe(struct udevice *dev)
 		return ret;
 	}
 
+	ret = reset_get_by_index(dev, 0, &reset);
+	if (!ret) {
+		reset_assert(&reset);
+		udelay(2);
+		reset_deassert(&reset);
+	}
+
 	plat->clock_rate = clk_get_rate(&clk);
 	if (plat->clock_rate < 0) {
 		clk_disable(&clk);