From: Priyanka Jain Date: Thu, 17 Nov 2016 06:59:52 +0000 (+0530) Subject: armv8: lsch3: Use SVR based timer base address detection X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=f6b96ff665844291a76de139bfbaa75fc0c7d917;p=u-boot.git armv8: lsch3: Use SVR based timer base address detection Timer controller base address has been changed from LS2080A SoC (and its personalities) to new SoCs like LS2088A, LS1088A. Use SVR based timer base address detection to avoid compile time #ifdef. Signed-off-by: Priyanka Jain Signed-off-by: Prabhakar Kushwaha Reviewed-by: York Sun --- diff --git a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c index e304870198..eb03bf44cb 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/cpu.c +++ b/arch/arm/cpu/armv8/fsl-layerscape/cpu.c @@ -433,6 +433,7 @@ int timer_init(void) #endif #ifdef CONFIG_LS2080A u32 __iomem *pctbenr = (u32 *)FSL_PMU_PCTBENR_OFFSET; + u32 svr_dev_id; #endif #ifdef COUNTER_FREQUENCY_REAL unsigned long cntfrq = COUNTER_FREQUENCY_REAL; @@ -455,6 +456,14 @@ int timer_init(void) * Register (PCTBENR), which allows the watchdog to operate. */ setbits_le32(pctbenr, 0xff); + /* + * For LS2080A SoC and its personalities, timer controller + * offset is different + */ + svr_dev_id = get_svr() >> 16; + if (svr_dev_id == SVR_DEV_LS2080A) + cntcr = (u32 *)SYS_FSL_LS2080A_LS2085A_TIMER_ADDR; + #endif /* Enable clock for timer diff --git a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h index 09c1033500..2df56f7a5b 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/immap_lsch3.h @@ -23,7 +23,8 @@ #define CONFIG_SYS_IFC_ADDR (CONFIG_SYS_IMMR + 0x01240000) #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_IMMR + 0x011C0500) #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_IMMR + 0x011C0600) -#define CONFIG_SYS_FSL_TIMER_ADDR 0x023d0000 +#define SYS_FSL_LS2080A_LS2085A_TIMER_ADDR 0x023d0000 +#define CONFIG_SYS_FSL_TIMER_ADDR 0x023e0000 #define CONFIG_SYS_FSL_PMU_CLTBENR (CONFIG_SYS_FSL_PMU_ADDR + \ 0x18A0) #define FSL_PMU_PCTBENR_OFFSET (CONFIG_SYS_FSL_PMU_ADDR + 0x8A0) diff --git a/arch/arm/include/asm/arch-fsl-layerscape/soc.h b/arch/arm/include/asm/arch-fsl-layerscape/soc.h index 58e90d8d88..3ccacb91fe 100644 --- a/arch/arm/include/asm/arch-fsl-layerscape/soc.h +++ b/arch/arm/include/asm/arch-fsl-layerscape/soc.h @@ -30,7 +30,7 @@ #define pex_lut_in32(a) in_be32(a) #define pex_lut_out32(a, v) out_be32(a, v) #endif - +#ifndef __ASSEMBLY__ struct cpu_type { char name[15]; u32 soc_ver; @@ -39,7 +39,7 @@ struct cpu_type { #define CPU_TYPE_ENTRY(n, v, nc) \ { .name = #n, .soc_ver = SVR_##v, .num_cores = (nc)} - +#endif #define SVR_WO_E 0xFFFFFE #define SVR_LS1012A 0x870400 #define SVR_LS1043A 0x879200 @@ -51,6 +51,8 @@ struct cpu_type { #define SVR_LS2085A 0x870100 #define SVR_LS2040A 0x870130 +#define SVR_DEV_LS2080A 0x8701 + #define SVR_MAJ(svr) (((svr) >> 4) & 0xf) #define SVR_MIN(svr) (((svr) >> 0) & 0xf) #define SVR_SOC_VER(svr) (((svr) >> 8) & SVR_WO_E) @@ -63,6 +65,7 @@ struct cpu_type { #define AHCI_PORT_TRANS_CFG 0x08000029 #define AHCI_PORT_AXICC_CFG 0x3fffffff +#ifndef __ASSEMBLY__ /* AHCI (sata) register map */ struct ccsr_ahci { u32 res1[0xa4/4]; /* 0x0 - 0xa4 */ @@ -105,4 +108,5 @@ void erratum_a010315(void); bool soc_has_dp_ddr(void); bool soc_has_aiop(void); +#endif #endif /* _ASM_ARMV8_FSL_LAYERSCAPE_SOC_H_ */