From: Andre Przywara <andre.przywara@arm.com>
Date: Fri, 18 Dec 2020 22:02:11 +0000 (+0000)
Subject: mmc: sunxi: Avoid #ifdefs in delay and width setup
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=f4826fb137a4514163aeea31ca8d17e70fcb37e4;p=u-boot.git

mmc: sunxi: Avoid #ifdefs in delay and width setup

The delay and bus-width setup are slightly different across the
Allwinner SoC generations, and we covered this so far with some
preprocessor conditionals.

Use the more readable IS_ENABLE() instead.

Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jaehoon Chung <jh80.chung@samsung.com>
---

diff --git a/drivers/mmc/sunxi_mmc.c b/drivers/mmc/sunxi_mmc.c
index 3503ccdb2e..87b79fcf5e 100644
--- a/drivers/mmc/sunxi_mmc.c
+++ b/drivers/mmc/sunxi_mmc.c
@@ -156,23 +156,19 @@ static int mmc_set_mod_clk(struct sunxi_mmc_priv *priv, unsigned int hz)
 	} else if (hz <= 25000000) {
 		oclk_dly = 0;
 		sclk_dly = 5;
-#ifdef CONFIG_MACH_SUN9I
-	} else if (hz <= 52000000) {
-		oclk_dly = 5;
-		sclk_dly = 4;
-	} else {
-		/* hz > 52000000 */
-		oclk_dly = 2;
-		sclk_dly = 4;
-#else
-	} else if (hz <= 52000000) {
-		oclk_dly = 3;
-		sclk_dly = 4;
 	} else {
-		/* hz > 52000000 */
-		oclk_dly = 1;
+		if (IS_ENABLED(CONFIG_MACH_SUN9I)) {
+			if (hz <= 52000000)
+				oclk_dly = 5;
+			else
+				oclk_dly = 2;
+		} else {
+			if (hz <= 52000000)
+				oclk_dly = 3;
+			else
+				oclk_dly = 1;
+		}
 		sclk_dly = 4;
-#endif
 	}
 
 	if (new_mode) {
@@ -521,10 +517,11 @@ struct mmc *sunxi_mmc_init(int sdc_no)
 
 	cfg->voltages = MMC_VDD_32_33 | MMC_VDD_33_34;
 	cfg->host_caps = MMC_MODE_4BIT;
-#if defined(CONFIG_MACH_SUN50I) || defined(CONFIG_MACH_SUN8I) || defined(CONFIG_SUN50I_GEN_H6)
-	if (sdc_no == 2)
+
+	if ((IS_ENABLED(CONFIG_MACH_SUN50I) || IS_ENABLED(CONFIG_MACH_SUN8I) ||
+	    IS_ENABLED(CONFIG_SUN50I_GEN_H6)) && (sdc_no == 2))
 		cfg->host_caps = MMC_MODE_8BIT;
-#endif
+
 	cfg->host_caps |= MMC_MODE_HS_52MHz | MMC_MODE_HS;
 	cfg->b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;