From: Andy Shevchenko Date: Tue, 20 Nov 2018 21:52:37 +0000 (+0200) Subject: x86: acpi: Add SPCR table description X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=f3275aa4a17f5307b4c70485e1d75088dd9c4526;p=u-boot.git x86: acpi: Add SPCR table description Add SPCR table description as it provided in Linux kernel. Port subtype for ACPI_DBG2_SERIAL_PORT is used as an interface type in SPCR. Thus, provide a set of definitions to be utilized later. Signed-off-by: Andy Shevchenko Reviewed-by: Bin Meng --- diff --git a/arch/x86/include/asm/acpi_table.h b/arch/x86/include/asm/acpi_table.h index 95fae036f6..51cc806673 100644 --- a/arch/x86/include/asm/acpi_table.h +++ b/arch/x86/include/asm/acpi_table.h @@ -303,6 +303,55 @@ struct acpi_mcfg_mmconfig { /* ACPI global NVS structure */ struct acpi_global_nvs; +/* DBG2 definitions are partially used for SPCR interface_type */ + +/* Types for port_type field */ + +#define ACPI_DBG2_SERIAL_PORT 0x8000 +#define ACPI_DBG2_1394_PORT 0x8001 +#define ACPI_DBG2_USB_PORT 0x8002 +#define ACPI_DBG2_NET_PORT 0x8003 + +/* Subtypes for port_subtype field */ + +#define ACPI_DBG2_16550_COMPATIBLE 0x0000 +#define ACPI_DBG2_16550_SUBSET 0x0001 +#define ACPI_DBG2_ARM_PL011 0x0003 +#define ACPI_DBG2_ARM_SBSA_32BIT 0x000D +#define ACPI_DBG2_ARM_SBSA_GENERIC 0x000E +#define ACPI_DBG2_ARM_DCC 0x000F +#define ACPI_DBG2_BCM2835 0x0010 + +#define ACPI_DBG2_1394_STANDARD 0x0000 + +#define ACPI_DBG2_USB_XHCI 0x0000 +#define ACPI_DBG2_USB_EHCI 0x0001 + +/* SPCR (Serial Port Console Redirection table) */ +struct __packed acpi_spcr { + struct acpi_table_header header; + u8 interface_type; + u8 reserved[3]; + struct acpi_gen_regaddr serial_port; + u8 interrupt_type; + u8 pc_interrupt; + u32 interrupt; /* Global system interrupt */ + u8 baud_rate; + u8 parity; + u8 stop_bits; + u8 flow_control; + u8 terminal_type; + u8 reserved1; + u16 pci_device_id; /* Must be 0xffff if not PCI device */ + u16 pci_vendor_id; /* Must be 0xffff if not PCI device */ + u8 pci_bus; + u8 pci_device; + u8 pci_function; + u32 pci_flags; + u8 pci_segment; + u32 reserved2; +}; + /* These can be used by the target port */ void acpi_fill_header(struct acpi_table_header *header, char *signature);