From: Dario Binacchi Date: Sun, 3 Sep 2023 20:48:48 +0000 (+0200) Subject: ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=f0c76e773148607fe4b990196538afb13e4224e6;p=u-boot.git ARM: dts: stm32: rename mmc_vcard to vcc-3v3 on stm32f746-disco commit e4e724099f04072053cf411456e3e9aae48c4af1 Linux upstream. In the schematics of document UM1907, the power supply for the micro SD card is the same 3v3 voltage that is used to power other devices on the board. By generalizing the name of the voltage regulator, it can be referenced by other nodes in the device tree without creating misunderstandings. This patch is preparatory for future developments. Signed-off-by: Dario Binacchi Signed-off-by: Alexandre Torgue Reviewed-by: Patrice Chotard --- diff --git a/arch/arm/dts/stm32f746-disco.dts b/arch/arm/dts/stm32f746-disco.dts index 9541f449fd..e1564d69f9 100644 --- a/arch/arm/dts/stm32f746-disco.dts +++ b/arch/arm/dts/stm32f746-disco.dts @@ -44,9 +44,9 @@ regulator-always-on; }; - mmc_vcard: mmc_vcard { + vcc_3v3: vcc-3v3 { compatible = "regulator-fixed"; - regulator-name = "mmc_vcard"; + regulator-name = "vcc_3v3"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; }; @@ -82,7 +82,7 @@ &sdio1 { status = "okay"; - vmmc-supply = <&mmc_vcard>; + vmmc-supply = <&vcc_3v3>; cd-gpios = <&gpioc 13 GPIO_ACTIVE_LOW>; pinctrl-names = "default", "opendrain"; pinctrl-0 = <&sdio_pins_a>;