From: SRICHARAN R <r.sricharan@ti.com>
Date: Mon, 4 Feb 2013 04:22:01 +0000 (+0000)
Subject: ARM: OMAP4+: Cleanup the clocks layer
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=ee9447bfe37a646a8dce182e6f625f27c10512a0;p=u-boot.git

ARM: OMAP4+: Cleanup the clocks layer

Currently there is quite a lot of code which
is duplicated in the clocks code for OMAP 4 and 5
Socs. Avoiding this here by moving the clocks
data to a SOC specific place and the sharing the
common code.

This helps in addition of a new Soc with minimal
changes.

Signed-off-by: R Sricharan <r.sricharan@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
Reviewed-by: Tom Rini <trini@ti.com>
---

diff --git a/arch/arm/cpu/armv7/omap-common/clocks-common.c b/arch/arm/cpu/armv7/omap-common/clocks-common.c
index d36fcccafe..2becc4aff5 100644
--- a/arch/arm/cpu/armv7/omap-common/clocks-common.c
+++ b/arch/arm/cpu/armv7/omap-common/clocks-common.c
@@ -47,6 +47,16 @@
 #define puts(s)
 #endif
 
+const u32 sys_clk_array[8] = {
+	12000000,	       /* 12 MHz */
+	13000000,	       /* 13 MHz */
+	16800000,	       /* 16.8 MHz */
+	19200000,	       /* 19.2 MHz */
+	26000000,	       /* 26 MHz */
+	27000000,	       /* 27 MHz */
+	38400000,	       /* 38.4 MHz */
+};
+
 static inline u32 __get_sys_clk_index(void)
 {
 	u32 ind;
@@ -76,6 +86,29 @@ u32 get_sys_clk_freq(void)
 	return sys_clk_array[index];
 }
 
+void setup_post_dividers(u32 const base, const struct dpll_params *params)
+{
+	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
+
+	/* Setup post-dividers */
+	if (params->m2 >= 0)
+		writel(params->m2, &dpll_regs->cm_div_m2_dpll);
+	if (params->m3 >= 0)
+		writel(params->m3, &dpll_regs->cm_div_m3_dpll);
+	if (params->m4_h11 >= 0)
+		writel(params->m4_h11, &dpll_regs->cm_div_m4_h11_dpll);
+	if (params->m5_h12 >= 0)
+		writel(params->m5_h12, &dpll_regs->cm_div_m5_h12_dpll);
+	if (params->m6_h13 >= 0)
+		writel(params->m6_h13, &dpll_regs->cm_div_m6_h13_dpll);
+	if (params->m7_h14 >= 0)
+		writel(params->m7_h14, &dpll_regs->cm_div_m7_h14_dpll);
+	if (params->h22 >= 0)
+		writel(params->h22, &dpll_regs->cm_div_h22_dpll);
+	if (params->h23 >= 0)
+		writel(params->h23, &dpll_regs->cm_div_h23_dpll);
+}
+
 static inline void do_bypass_dpll(u32 const base)
 {
 	struct dpll_regs *dpll_regs = (struct dpll_regs *)base;
@@ -124,6 +157,46 @@ inline u32 check_for_lock(u32 const base)
 	return lock;
 }
 
+const struct dpll_params *get_mpu_dpll_params(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->mpu[sysclk_ind];
+}
+
+const struct dpll_params *get_core_dpll_params(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->core[sysclk_ind];
+}
+
+const struct dpll_params *get_per_dpll_params(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->per[sysclk_ind];
+}
+
+const struct dpll_params *get_iva_dpll_params(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->iva[sysclk_ind];
+}
+
+const struct dpll_params *get_usb_dpll_params(struct dplls const *dpll_data)
+{
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->usb[sysclk_ind];
+}
+
+const struct dpll_params *get_abe_dpll_params(struct dplls const *dpll_data)
+{
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	u32 sysclk_ind = get_sys_clk_index();
+	return &dpll_data->abe[sysclk_ind];
+#else
+	return dpll_data->abe;
+#endif
+}
+
 static void do_setup_dpll(u32 const base, const struct dpll_params *params,
 				u8 lock, char *dpll)
 {
@@ -184,7 +257,7 @@ u32 omap_ddr_clk(void)
 	omap_rev = omap_revision();
 	sys_clk_khz = get_sys_clk_freq() / 1000;
 
-	core_dpll_params = get_core_dpll_params();
+	core_dpll_params = get_core_dpll_params(*dplls_data);
 
 	debug("sys_clk %d\n ", sys_clk_khz * 1000);
 
@@ -251,7 +324,7 @@ void configure_mpu_dpll(void)
 	setbits_le32((*prcm)->cm_mpu_mpu_clkctrl,
 		MPU_CLKCTRL_CLKSEL_ABE_DIV_MODE_MASK);
 
-	params = get_mpu_dpll_params();
+	params = get_mpu_dpll_params(*dplls_data);
 
 	do_setup_dpll((*prcm)->cm_clkmode_dpll_mpu, params, DPLL_LOCK, "mpu");
 	debug("MPU DPLL locked\n");
@@ -272,7 +345,7 @@ static void setup_usb_dpll(void)
 	 * Use CLKINP in KHz and adjust the denominator accordingly so
 	 * that we have enough accuracy and at the same time no overflow
 	 */
-	params = get_usb_dpll_params();
+	params = get_usb_dpll_params(*dplls_data);
 	num = params->m * sys_clk_khz;
 	den = (params->n + 1) * 250 * 1000;
 	num += den - 1;
@@ -294,7 +367,7 @@ static void setup_dplls(void)
 	debug("setup_dplls\n");
 
 	/* CORE dpll */
-	params = get_core_dpll_params();	/* default - safest */
+	params = get_core_dpll_params(*dplls_data);	/* default - safest */
 	/*
 	 * Do not lock the core DPLL now. Just set it up.
 	 * Core DPLL will be locked after setting up EMIF
@@ -314,7 +387,7 @@ static void setup_dplls(void)
 	debug("Core DPLL configured\n");
 
 	/* lock PER dpll */
-	params = get_per_dpll_params();
+	params = get_per_dpll_params(*dplls_data);
 	do_setup_dpll((*prcm)->cm_clkmode_dpll_per,
 			params, DPLL_LOCK, "per");
 	debug("PER DPLL locked\n");
@@ -337,11 +410,11 @@ static void setup_non_essential_dplls(void)
 	clrsetbits_le32((*prcm)->cm_bypclk_dpll_iva,
 		CM_BYPCLK_DPLL_IVA_CLKSEL_MASK, DPLL_IVA_CLKSEL_CORE_X2_DIV_2);
 
-	params = get_iva_dpll_params();
+	params = get_iva_dpll_params(*dplls_data);
 	do_setup_dpll((*prcm)->cm_clkmode_dpll_iva, params, DPLL_LOCK, "iva");
 
 	/* Configure ABE dpll */
-	params = get_abe_dpll_params();
+	params = get_abe_dpll_params(*dplls_data);
 #ifdef CONFIG_SYS_OMAP_ABE_SYSCK
 	abe_ref_clk = CM_ABE_PLL_REF_CLKSEL_CLKSEL_SYSCLK;
 #else
@@ -459,7 +532,7 @@ void freq_update_core(void)
 	const struct dpll_params *core_dpll_params;
 	u32 omap_rev = omap_revision();
 
-	core_dpll_params = get_core_dpll_params();
+	core_dpll_params = get_core_dpll_params(*dplls_data);
 	/* Put EMIF clock domain in sw wakeup mode */
 	enable_clock_domain((*prcm)->cm_memif_clkstctrl,
 				CD_CLKCTRL_CLKTRCTRL_SW_WKUP);
diff --git a/arch/arm/cpu/armv7/omap4/clocks.c b/arch/arm/cpu/armv7/omap4/clocks.c
index 9acceb0d45..4772743947 100644
--- a/arch/arm/cpu/armv7/omap4/clocks.c
+++ b/arch/arm/cpu/armv7/omap4/clocks.c
@@ -46,221 +46,6 @@
 #define puts(s)
 #endif /* !CONFIG_SPL_BUILD */
 
-const u32 sys_clk_array[8] = {
-	12000000,	       /* 12 MHz */
-	13000000,	       /* 13 MHz */
-	16800000,	       /* 16.8 MHz */
-	19200000,	       /* 19.2 MHz */
-	26000000,	       /* 26 MHz */
-	27000000,	       /* 27 MHz */
-	38400000,	       /* 38.4 MHz */
-};
-
-/*
- * The M & N values in the following tables are created using the
- * following tool:
- * tools/omap/clocks_get_m_n.c
- * Please use this tool for creating the table for any new frequency.
- */
-
-/* dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF */
-static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = {
-	{175, 2, 1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{700, 12, 1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{125, 2, 1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{401, 10, 1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{350, 12, 1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{700, 26, 1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{638, 34, 1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */
-static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = {
-	{200, 2, 1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{800, 12, 1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{619, 12, 1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{125, 2, 1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{400, 12, 1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{800, 26, 1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{125, 5, 1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
-};
-
-/* dpll locked at 1200 MHz - MPU clk at 600 MHz */
-static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = {
-	{50, 0, 1, -1, -1, -1, -1, -1},		/* 12 MHz   */
-	{600, 12, 1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{250, 6, 1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{125, 3, 1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{300, 12, 1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{200, 8, 1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{125, 7, 1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
-};
-
-static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = {
-	{200, 2, 1, 5, 8, 4, 6, 5},	/* 12 MHz   */
-	{800, 12, 1, 5, 8, 4, 6, 5},	/* 13 MHz   */
-	{619, 12, 1, 5, 8, 4, 6, 5},	/* 16.8 MHz */
-	{125, 2, 1, 5, 8, 4, 6, 5},	/* 19.2 MHz */
-	{400, 12, 1, 5, 8, 4, 6, 5},	/* 26 MHz   */
-	{800, 26, 1, 5, 8, 4, 6, 5},	/* 27 MHz   */
-	{125, 5, 1, 5, 8, 4, 6, 5}	/* 38.4 MHz */
-};
-
-static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = {
-	{127, 1, 1, 5, 8, 4, 6, 5},	/* 12 MHz   */
-	{762, 12, 1, 5, 8, 4, 6, 5},	/* 13 MHz   */
-	{635, 13, 1, 5, 8, 4, 6, 5},	/* 16.8 MHz */
-	{635, 15, 1, 5, 8, 4, 6, 5},	/* 19.2 MHz */
-	{381, 12, 1, 5, 8, 4, 6, 5},	/* 26 MHz   */
-	{254, 8, 1, 5, 8, 4, 6, 5},	/* 27 MHz   */
-	{496, 24, 1, 5, 8, 4, 6, 5}	/* 38.4 MHz */
-};
-
-static const struct dpll_params
-		core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = {
-	{200, 2, 2, 5, 8, 4, 6, 5},	/* 12 MHz   */
-	{800, 12, 2, 5, 8, 4, 6, 5},	/* 13 MHz   */
-	{619, 12, 2, 5, 8, 4, 6, 5},	/* 16.8 MHz */
-	{125, 2, 2, 5, 8, 4, 6, 5},	/* 19.2 MHz */
-	{400, 12, 2, 5, 8, 4, 6, 5},	/* 26 MHz   */
-	{800, 26, 2, 5, 8, 4, 6, 5},	/* 27 MHz   */
-	{125, 5, 2, 5, 8, 4, 6, 5}	/* 38.4 MHz */
-};
-
-static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = {
-	{64, 0, 8, 6, 12, 9, 4, 5},	/* 12 MHz   */
-	{768, 12, 8, 6, 12, 9, 4, 5},	/* 13 MHz   */
-	{320, 6, 8, 6, 12, 9, 4, 5},	/* 16.8 MHz */
-	{40, 0, 8, 6, 12, 9, 4, 5},	/* 19.2 MHz */
-	{384, 12, 8, 6, 12, 9, 4, 5},	/* 26 MHz   */
-	{256, 8, 8, 6, 12, 9, 4, 5},	/* 27 MHz   */
-	{20, 0, 8, 6, 12, 9, 4, 5}	/* 38.4 MHz */
-};
-
-static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = {
-	{931, 11, -1, -1, 4, 7, -1, -1},	/* 12 MHz   */
-	{931, 12, -1, -1, 4, 7, -1, -1},	/* 13 MHz   */
-	{665, 11, -1, -1, 4, 7, -1, -1},	/* 16.8 MHz */
-	{727, 14, -1, -1, 4, 7, -1, -1},	/* 19.2 MHz */
-	{931, 25, -1, -1, 4, 7, -1, -1},	/* 26 MHz   */
-	{931, 26, -1, -1, 4, 7, -1, -1},	/* 27 MHz   */
-	{291, 11, -1, -1, 4, 7, -1, -1}		/* 38.4 MHz */
-};
-
-/* ABE M & N values with sys_clk as source */
-static const struct dpll_params
-		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
-	{49, 5, 1, 1, -1, -1, -1, -1},	/* 12 MHz   */
-	{68, 8, 1, 1, -1, -1, -1, -1},	/* 13 MHz   */
-	{35, 5, 1, 1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{46, 8, 1, 1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{34, 8, 1, 1, -1, -1, -1, -1},	/* 26 MHz   */
-	{29, 7, 1, 1, -1, -1, -1, -1},	/* 27 MHz   */
-	{64, 24, 1, 1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-/* ABE M & N values with 32K clock as source */
-static const struct dpll_params abe_dpll_params_32k_196608khz = {
-	750, 0, 1, 1, -1, -1, -1, -1
-};
-
-static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
-	{80, 0, 2, -1, -1, -1, -1, -1},		/* 12 MHz   */
-	{960, 12, 2, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{400, 6, 2, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{50, 0, 2, -1, -1, -1, -1, -1},		/* 19.2 MHz */
-	{480, 12, 2, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{320, 8, 2, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{25, 0, 2, -1, -1, -1, -1, -1}		/* 38.4 MHz */
-};
-
-void setup_post_dividers(u32 const base, const struct dpll_params *params)
-{
-	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
-
-	/* Setup post-dividers */
-	if (params->m2 >= 0)
-		writel(params->m2, &dpll_regs->cm_div_m2_dpll);
-	if (params->m3 >= 0)
-		writel(params->m3, &dpll_regs->cm_div_m3_dpll);
-	if (params->m4 >= 0)
-		writel(params->m4, &dpll_regs->cm_div_m4_dpll);
-	if (params->m5 >= 0)
-		writel(params->m5, &dpll_regs->cm_div_m5_dpll);
-	if (params->m6 >= 0)
-		writel(params->m6, &dpll_regs->cm_div_m6_dpll);
-	if (params->m7 >= 0)
-		writel(params->m7, &dpll_regs->cm_div_m7_dpll);
-}
-
-/*
- * Lock MPU dpll
- *
- * Resulting MPU frequencies:
- * 4430 ES1.0	: 600 MHz
- * 4430 ES2.x	: 792 MHz (OPP Turbo)
- * 4460		: 920 MHz (OPP Turbo) - DCC disabled
- */
-const struct dpll_params *get_mpu_dpll_params(void)
-{
-	u32 omap_rev, sysclk_ind;
-
-	omap_rev = omap_revision();
-	sysclk_ind = get_sys_clk_index();
-
-	if (omap_rev == OMAP4430_ES1_0)
-		return &mpu_dpll_params_1200mhz[sysclk_ind];
-	else if (omap_rev < OMAP4460_ES1_0)
-		return &mpu_dpll_params_1600mhz[sysclk_ind];
-	else
-		return &mpu_dpll_params_1400mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_core_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-
-	switch (omap_revision()) {
-	case OMAP4430_ES1_0:
-		return &core_dpll_params_es1_1524mhz[sysclk_ind];
-	case OMAP4430_ES2_0:
-	case OMAP4430_SILICON_ID_INVALID:
-		 /* safest */
-		return &core_dpll_params_es2_1600mhz_ddr200mhz[sysclk_ind];
-	default:
-		return &core_dpll_params_1600mhz[sysclk_ind];
-	}
-}
-
-
-const struct dpll_params *get_per_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-	return &per_dpll_params_1536mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_iva_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-	return &iva_dpll_params_1862mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_usb_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-	return &usb_dpll_params_1920mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_abe_dpll_params(void)
-{
-#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
-	u32 sysclk_ind = get_sys_clk_index();
-	return &abe_dpll_params_sysclk_196608khz[sysclk_ind];
-#else
-	return &abe_dpll_params_32k_196608khz;
-#endif
-}
-
 /*
  * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
  * We set the maximum voltages allowed here because Smart-Reflex is not
@@ -336,181 +121,3 @@ u32 get_offset_code(u32 offset)
 	/* The code starts at 1 not 0 */
 	return ++offset_code;
 }
-
-/*
- * Enable essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_basic_clocks(void)
-{
-	u32 const clk_domains_essential[] = {
-		(*prcm)->cm_l4per_clkstctrl,
-		(*prcm)->cm_l3init_clkstctrl,
-		(*prcm)->cm_memif_clkstctrl,
-		(*prcm)->cm_l4cfg_clkstctrl,
-		0
-	};
-
-	u32 const clk_modules_hw_auto_essential[] = {
-		(*prcm)->cm_l3_2_gpmc_clkctrl,
-		(*prcm)->cm_memif_emif_1_clkctrl,
-		(*prcm)->cm_memif_emif_2_clkctrl,
-		(*prcm)->cm_l4cfg_l4_cfg_clkctrl,
-		(*prcm)->cm_wkup_gpio1_clkctrl,
-		(*prcm)->cm_l4per_gpio2_clkctrl,
-		(*prcm)->cm_l4per_gpio3_clkctrl,
-		(*prcm)->cm_l4per_gpio4_clkctrl,
-		(*prcm)->cm_l4per_gpio5_clkctrl,
-		(*prcm)->cm_l4per_gpio6_clkctrl,
-		0
-	};
-
-	u32 const clk_modules_explicit_en_essential[] = {
-		(*prcm)->cm_wkup_gptimer1_clkctrl,
-		(*prcm)->cm_l3init_hsmmc1_clkctrl,
-		(*prcm)->cm_l3init_hsmmc2_clkctrl,
-		(*prcm)->cm_l4per_gptimer2_clkctrl,
-		(*prcm)->cm_wkup_wdtimer2_clkctrl,
-		(*prcm)->cm_l4per_uart3_clkctrl,
-		0
-	};
-
-	/* Enable optional additional functional clock for GPIO4 */
-	setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl,
-			GPIO4_CLKCTRL_OPTFCLKEN_MASK);
-
-	/* Enable 96 MHz clock for MMC1 & MMC2 */
-	setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
-			HSMMC_CLKCTRL_CLKSEL_MASK);
-	setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
-			HSMMC_CLKCTRL_CLKSEL_MASK);
-
-	/* Select 32KHz clock as the source of GPTIMER1 */
-	setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl,
-			GPTIMER1_CLKCTRL_CLKSEL_MASK);
-
-	/* Enable optional 48M functional clock for USB  PHY */
-	setbits_le32((*prcm)->cm_l3init_usbphy_clkctrl,
-			USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK);
-
-	do_enable_clocks(clk_domains_essential,
-			 clk_modules_hw_auto_essential,
-			 clk_modules_explicit_en_essential,
-			 1);
-}
-
-void enable_basic_uboot_clocks(void)
-{
-	u32 const clk_domains_essential[] = {
-		0
-	};
-
-	u32 const clk_modules_hw_auto_essential[] = {
-		(*prcm)->cm_l3init_hsusbotg_clkctrl,
-		(*prcm)->cm_l3init_usbphy_clkctrl,
-		(*prcm)->cm_l3init_usbphy_clkctrl,
-		(*prcm)->cm_clksel_usb_60mhz,
-		(*prcm)->cm_l3init_hsusbtll_clkctrl,
-		0
-	};
-
-	u32 const clk_modules_explicit_en_essential[] = {
-		(*prcm)->cm_l4per_mcspi1_clkctrl,
-		(*prcm)->cm_l4per_i2c1_clkctrl,
-		(*prcm)->cm_l4per_i2c2_clkctrl,
-		(*prcm)->cm_l4per_i2c3_clkctrl,
-		(*prcm)->cm_l4per_i2c4_clkctrl,
-		(*prcm)->cm_l3init_hsusbhost_clkctrl,
-		0
-	};
-
-	do_enable_clocks(clk_domains_essential,
-			 clk_modules_hw_auto_essential,
-			 clk_modules_explicit_en_essential,
-			 1);
-}
-
-/*
- * Enable non-essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_non_essential_clocks(void)
-{
-	u32 const clk_domains_non_essential[] = {
-		(*prcm)->cm_mpu_m3_clkstctrl,
-		(*prcm)->cm_ivahd_clkstctrl,
-		(*prcm)->cm_dsp_clkstctrl,
-		(*prcm)->cm_dss_clkstctrl,
-		(*prcm)->cm_sgx_clkstctrl,
-		(*prcm)->cm1_abe_clkstctrl,
-		(*prcm)->cm_c2c_clkstctrl,
-		(*prcm)->cm_cam_clkstctrl,
-		(*prcm)->cm_dss_clkstctrl,
-		(*prcm)->cm_sdma_clkstctrl,
-		0
-	};
-
-	u32 const clk_modules_hw_auto_non_essential[] = {
-		(*prcm)->cm_l3instr_l3_3_clkctrl,
-		(*prcm)->cm_l3instr_l3_instr_clkctrl,
-		(*prcm)->cm_l3instr_intrconn_wp1_clkctrl,
-		(*prcm)->cm_l3init_hsi_clkctrl,
-		0
-	};
-
-	u32 const clk_modules_explicit_en_non_essential[] = {
-		(*prcm)->cm1_abe_aess_clkctrl,
-		(*prcm)->cm1_abe_pdm_clkctrl,
-		(*prcm)->cm1_abe_dmic_clkctrl,
-		(*prcm)->cm1_abe_mcasp_clkctrl,
-		(*prcm)->cm1_abe_mcbsp1_clkctrl,
-		(*prcm)->cm1_abe_mcbsp2_clkctrl,
-		(*prcm)->cm1_abe_mcbsp3_clkctrl,
-		(*prcm)->cm1_abe_slimbus_clkctrl,
-		(*prcm)->cm1_abe_timer5_clkctrl,
-		(*prcm)->cm1_abe_timer6_clkctrl,
-		(*prcm)->cm1_abe_timer7_clkctrl,
-		(*prcm)->cm1_abe_timer8_clkctrl,
-		(*prcm)->cm1_abe_wdt3_clkctrl,
-		(*prcm)->cm_l4per_gptimer9_clkctrl,
-		(*prcm)->cm_l4per_gptimer10_clkctrl,
-		(*prcm)->cm_l4per_gptimer11_clkctrl,
-		(*prcm)->cm_l4per_gptimer3_clkctrl,
-		(*prcm)->cm_l4per_gptimer4_clkctrl,
-		(*prcm)->cm_l4per_hdq1w_clkctrl,
-		(*prcm)->cm_l4per_mcbsp4_clkctrl,
-		(*prcm)->cm_l4per_mcspi2_clkctrl,
-		(*prcm)->cm_l4per_mcspi3_clkctrl,
-		(*prcm)->cm_l4per_mcspi4_clkctrl,
-		(*prcm)->cm_l4per_mmcsd3_clkctrl,
-		(*prcm)->cm_l4per_mmcsd4_clkctrl,
-		(*prcm)->cm_l4per_mmcsd5_clkctrl,
-		(*prcm)->cm_l4per_uart1_clkctrl,
-		(*prcm)->cm_l4per_uart2_clkctrl,
-		(*prcm)->cm_l4per_uart4_clkctrl,
-		(*prcm)->cm_wkup_keyboard_clkctrl,
-		(*prcm)->cm_wkup_wdtimer2_clkctrl,
-		(*prcm)->cm_cam_iss_clkctrl,
-		(*prcm)->cm_cam_fdif_clkctrl,
-		(*prcm)->cm_dss_dss_clkctrl,
-		(*prcm)->cm_sgx_sgx_clkctrl,
-		0
-	};
-
-	/* Enable optional functional clock for ISS */
-	setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
-
-	/* Enable all optional functional clocks of DSS */
-	setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
-
-	do_enable_clocks(clk_domains_non_essential,
-			 clk_modules_hw_auto_non_essential,
-			 clk_modules_explicit_en_non_essential,
-			 0);
-
-	/* Put camera module in no sleep mode */
-	clrsetbits_le32((*prcm)->cm_cam_clkstctrl,
-			MODULE_CLKCTRL_MODULEMODE_MASK,
-			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
-			MODULE_CLKCTRL_MODULEMODE_SHIFT);
-}
diff --git a/arch/arm/cpu/armv7/omap4/hw_data.c b/arch/arm/cpu/armv7/omap4/hw_data.c
index 3174cc3262..6ae3986d73 100644
--- a/arch/arm/cpu/armv7/omap4/hw_data.c
+++ b/arch/arm/cpu/armv7/omap4/hw_data.c
@@ -27,12 +27,377 @@
  */
 #include <common.h>
 #include <asm/arch/omap.h>
+#include <asm/arch/sys_proto.h>
 #include <asm/omap_common.h>
+#include <asm/arch/clocks.h>
+#include <asm/io.h>
 
 struct prcm_regs const **prcm =
 			(struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR;
+struct dplls const **dplls_data =
+			(struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
+
+/*
+ * The M & N values in the following tables are created using the
+ * following tool:
+ * tools/omap/clocks_get_m_n.c
+ * Please use this tool for creating the table for any new frequency.
+ */
+
+/* dpll locked at 1400 MHz MPU clk at 700 MHz(OPP100) - DCC OFF */
+static const struct dpll_params mpu_dpll_params_1400mhz[NUM_SYS_CLKS] = {
+	{175, 2, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{700, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{125, 2, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{401, 10, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{350, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{700, 26, 1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{638, 34, 1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* dpll locked at 1584 MHz - MPU clk at 792 MHz(OPP Turbo 4430) */
+static const struct dpll_params mpu_dpll_params_1600mhz[NUM_SYS_CLKS] = {
+	{200, 2, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{800, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{619, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{125, 2, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{400, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{800, 26, 1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{125, 5, 1, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+/* dpll locked at 1200 MHz - MPU clk at 600 MHz */
+static const struct dpll_params mpu_dpll_params_1200mhz[NUM_SYS_CLKS] = {
+	{50, 0, 1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{600, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{250, 6, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{125, 3, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{300, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{200, 8, 1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{125, 7, 1, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+static const struct dpll_params core_dpll_params_1600mhz[NUM_SYS_CLKS] = {
+	{200, 2, 1, 5, 8, 4, 6, 5, -1, -1},	/* 12 MHz   */
+	{800, 12, 1, 5, 8, 4, 6, 5, -1, -1},	/* 13 MHz   */
+	{619, 12, 1, 5, 8, 4, 6, 5, -1, -1},	/* 16.8 MHz */
+	{125, 2, 1, 5, 8, 4, 6, 5, -1, -1},	/* 19.2 MHz */
+	{400, 12, 1, 5, 8, 4, 6, 5, -1, -1},	/* 26 MHz   */
+	{800, 26, 1, 5, 8, 4, 6, 5, -1, -1},	/* 27 MHz   */
+	{125, 5, 1, 5, 8, 4, 6, 5, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params core_dpll_params_es1_1524mhz[NUM_SYS_CLKS] = {
+	{127, 1, 1, 5, 8, 4, 6, 5, -1, -1},	/* 12 MHz   */
+	{762, 12, 1, 5, 8, 4, 6, 5, -1, -1},	/* 13 MHz   */
+	{635, 13, 1, 5, 8, 4, 6, 5, -1, -1},	/* 16.8 MHz */
+	{635, 15, 1, 5, 8, 4, 6, 5, -1, -1},	/* 19.2 MHz */
+	{381, 12, 1, 5, 8, 4, 6, 5, -1, -1},	/* 26 MHz   */
+	{254, 8, 1, 5, 8, 4, 6, 5, -1, -1},	/* 27 MHz   */
+	{496, 24, 1, 5, 8, 4, 6, 5, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params
+		core_dpll_params_es2_1600mhz_ddr200mhz[NUM_SYS_CLKS] = {
+	{200, 2, 2, 5, 8, 4, 6, 5, -1, -1},	/* 12 MHz   */
+	{800, 12, 2, 5, 8, 4, 6, 5, -1, -1},	/* 13 MHz   */
+	{619, 12, 2, 5, 8, 4, 6, 5, -1, -1},	/* 16.8 MHz */
+	{125, 2, 2, 5, 8, 4, 6, 5, -1, -1},	/* 19.2 MHz */
+	{400, 12, 2, 5, 8, 4, 6, 5, -1, -1},	/* 26 MHz   */
+	{800, 26, 2, 5, 8, 4, 6, 5, -1, -1},	/* 27 MHz   */
+	{125, 5, 2, 5, 8, 4, 6, 5, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_1536mhz[NUM_SYS_CLKS] = {
+	{64, 0, 8, 6, 12, 9, 4, 5, -1, -1},	/* 12 MHz   */
+	{768, 12, 8, 6, 12, 9, 4, 5, -1, -1},	/* 13 MHz   */
+	{320, 6, 8, 6, 12, 9, 4, 5, -1, -1},	/* 16.8 MHz */
+	{40, 0, 8, 6, 12, 9, 4, 5, -1, -1},	/* 19.2 MHz */
+	{384, 12, 8, 6, 12, 9, 4, 5, -1, -1},	/* 26 MHz   */
+	{256, 8, 8, 6, 12, 9, 4, 5, -1, -1},	/* 27 MHz   */
+	{20, 0, 8, 6, 12, 9, 4, 5, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params iva_dpll_params_1862mhz[NUM_SYS_CLKS] = {
+	{931, 11, -1, -1, 4, 7, -1, -1, -1, -1},	/* 12 MHz   */
+	{931, 12, -1, -1, 4, 7, -1, -1, -1, -1},	/* 13 MHz   */
+	{665, 11, -1, -1, 4, 7, -1, -1, -1, -1},	/* 16.8 MHz */
+	{727, 14, -1, -1, 4, 7, -1, -1, -1, -1},	/* 19.2 MHz */
+	{931, 25, -1, -1, 4, 7, -1, -1, -1, -1},	/* 26 MHz   */
+	{931, 26, -1, -1, 4, 7, -1, -1, -1, -1},	/* 27 MHz   */
+	{291, 11, -1, -1, 4, 7, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+/* ABE M & N values with sys_clk as source */
+static const struct dpll_params
+		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
+	{49, 5, 1, 1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{68, 8, 1, 1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{35, 5, 1, 1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{46, 8, 1, 1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{34, 8, 1, 1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{29, 7, 1, 1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{64, 24, 1, 1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* ABE M & N values with 32K clock as source */
+static const struct dpll_params abe_dpll_params_32k_196608khz = {
+	750, 0, 1, 1, -1, -1, -1, -1, -1, -1
+};
+
+static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
+	{80, 0, 2, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{960, 12, 2, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{400, 6, 2, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{50, 0, 2, -1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{480, 12, 2, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{320, 8, 2, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{25, 0, 2, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+struct dplls omap4430_dplls_es1 = {
+	.mpu = mpu_dpll_params_1200mhz,
+	.core = core_dpll_params_es1_1524mhz,
+	.per = per_dpll_params_1536mhz,
+	.iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz
+};
+
+struct dplls omap4430_dplls = {
+	.mpu = mpu_dpll_params_1600mhz,
+	.core = core_dpll_params_es2_1600mhz_ddr200mhz,
+	.per = per_dpll_params_1536mhz,
+	.iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz
+};
+
+struct dplls omap4460_dplls = {
+	.mpu = mpu_dpll_params_1400mhz,
+	.core = core_dpll_params_1600mhz,
+	.per = per_dpll_params_1536mhz,
+	.iva = iva_dpll_params_1862mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz
+};
+
+/*
+ * Enable essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_basic_clocks(void)
+{
+	u32 const clk_domains_essential[] = {
+		(*prcm)->cm_l4per_clkstctrl,
+		(*prcm)->cm_l3init_clkstctrl,
+		(*prcm)->cm_memif_clkstctrl,
+		(*prcm)->cm_l4cfg_clkstctrl,
+		0
+	};
+
+	u32 const clk_modules_hw_auto_essential[] = {
+		(*prcm)->cm_l3_2_gpmc_clkctrl,
+		(*prcm)->cm_memif_emif_1_clkctrl,
+		(*prcm)->cm_memif_emif_2_clkctrl,
+		(*prcm)->cm_l4cfg_l4_cfg_clkctrl,
+		(*prcm)->cm_wkup_gpio1_clkctrl,
+		(*prcm)->cm_l4per_gpio2_clkctrl,
+		(*prcm)->cm_l4per_gpio3_clkctrl,
+		(*prcm)->cm_l4per_gpio4_clkctrl,
+		(*prcm)->cm_l4per_gpio5_clkctrl,
+		(*prcm)->cm_l4per_gpio6_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_essential[] = {
+		(*prcm)->cm_wkup_gptimer1_clkctrl,
+		(*prcm)->cm_l3init_hsmmc1_clkctrl,
+		(*prcm)->cm_l3init_hsmmc2_clkctrl,
+		(*prcm)->cm_l4per_gptimer2_clkctrl,
+		(*prcm)->cm_wkup_wdtimer2_clkctrl,
+		(*prcm)->cm_l4per_uart3_clkctrl,
+		0
+	};
+
+	/* Enable optional additional functional clock for GPIO4 */
+	setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl,
+			GPIO4_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable 96 MHz clock for MMC1 & MMC2 */
+	setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+	setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+
+	/* Select 32KHz clock as the source of GPTIMER1 */
+	setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl,
+			GPTIMER1_CLKCTRL_CLKSEL_MASK);
+
+	/* Enable optional 48M functional clock for USB  PHY */
+	setbits_le32((*prcm)->cm_l3init_usbphy_clkctrl,
+			USBPHY_CLKCTRL_OPTFCLKEN_PHY_48M_MASK);
+
+	do_enable_clocks(clk_domains_essential,
+			 clk_modules_hw_auto_essential,
+			 clk_modules_explicit_en_essential,
+			 1);
+}
+
+void enable_basic_uboot_clocks(void)
+{
+	u32 const clk_domains_essential[] = {
+		0
+	};
+
+	u32 const clk_modules_hw_auto_essential[] = {
+		(*prcm)->cm_l3init_hsusbotg_clkctrl,
+		(*prcm)->cm_l3init_usbphy_clkctrl,
+		(*prcm)->cm_l3init_usbphy_clkctrl,
+		(*prcm)->cm_clksel_usb_60mhz,
+		(*prcm)->cm_l3init_hsusbtll_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_essential[] = {
+		(*prcm)->cm_l4per_mcspi1_clkctrl,
+		(*prcm)->cm_l4per_i2c1_clkctrl,
+		(*prcm)->cm_l4per_i2c2_clkctrl,
+		(*prcm)->cm_l4per_i2c3_clkctrl,
+		(*prcm)->cm_l4per_i2c4_clkctrl,
+		(*prcm)->cm_l3init_hsusbhost_clkctrl,
+		0
+	};
+
+	do_enable_clocks(clk_domains_essential,
+			 clk_modules_hw_auto_essential,
+			 clk_modules_explicit_en_essential,
+			 1);
+}
+
+/*
+ * Enable non-essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_non_essential_clocks(void)
+{
+	u32 const clk_domains_non_essential[] = {
+		(*prcm)->cm_mpu_m3_clkstctrl,
+		(*prcm)->cm_ivahd_clkstctrl,
+		(*prcm)->cm_dsp_clkstctrl,
+		(*prcm)->cm_dss_clkstctrl,
+		(*prcm)->cm_sgx_clkstctrl,
+		(*prcm)->cm1_abe_clkstctrl,
+		(*prcm)->cm_c2c_clkstctrl,
+		(*prcm)->cm_cam_clkstctrl,
+		(*prcm)->cm_dss_clkstctrl,
+		(*prcm)->cm_sdma_clkstctrl,
+		0
+	};
+
+	u32 const clk_modules_hw_auto_non_essential[] = {
+		(*prcm)->cm_l3instr_l3_3_clkctrl,
+		(*prcm)->cm_l3instr_l3_instr_clkctrl,
+		(*prcm)->cm_l3instr_intrconn_wp1_clkctrl,
+		(*prcm)->cm_l3init_hsi_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_non_essential[] = {
+		(*prcm)->cm1_abe_aess_clkctrl,
+		(*prcm)->cm1_abe_pdm_clkctrl,
+		(*prcm)->cm1_abe_dmic_clkctrl,
+		(*prcm)->cm1_abe_mcasp_clkctrl,
+		(*prcm)->cm1_abe_mcbsp1_clkctrl,
+		(*prcm)->cm1_abe_mcbsp2_clkctrl,
+		(*prcm)->cm1_abe_mcbsp3_clkctrl,
+		(*prcm)->cm1_abe_slimbus_clkctrl,
+		(*prcm)->cm1_abe_timer5_clkctrl,
+		(*prcm)->cm1_abe_timer6_clkctrl,
+		(*prcm)->cm1_abe_timer7_clkctrl,
+		(*prcm)->cm1_abe_timer8_clkctrl,
+		(*prcm)->cm1_abe_wdt3_clkctrl,
+		(*prcm)->cm_l4per_gptimer9_clkctrl,
+		(*prcm)->cm_l4per_gptimer10_clkctrl,
+		(*prcm)->cm_l4per_gptimer11_clkctrl,
+		(*prcm)->cm_l4per_gptimer3_clkctrl,
+		(*prcm)->cm_l4per_gptimer4_clkctrl,
+		(*prcm)->cm_l4per_hdq1w_clkctrl,
+		(*prcm)->cm_l4per_mcbsp4_clkctrl,
+		(*prcm)->cm_l4per_mcspi2_clkctrl,
+		(*prcm)->cm_l4per_mcspi3_clkctrl,
+		(*prcm)->cm_l4per_mcspi4_clkctrl,
+		(*prcm)->cm_l4per_mmcsd3_clkctrl,
+		(*prcm)->cm_l4per_mmcsd4_clkctrl,
+		(*prcm)->cm_l4per_mmcsd5_clkctrl,
+		(*prcm)->cm_l4per_uart1_clkctrl,
+		(*prcm)->cm_l4per_uart2_clkctrl,
+		(*prcm)->cm_l4per_uart4_clkctrl,
+		(*prcm)->cm_wkup_keyboard_clkctrl,
+		(*prcm)->cm_wkup_wdtimer2_clkctrl,
+		(*prcm)->cm_cam_iss_clkctrl,
+		(*prcm)->cm_cam_fdif_clkctrl,
+		(*prcm)->cm_dss_dss_clkctrl,
+		(*prcm)->cm_sgx_sgx_clkctrl,
+		0
+	};
+
+	/* Enable optional functional clock for ISS */
+	setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable all optional functional clocks of DSS */
+	setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
+
+	do_enable_clocks(clk_domains_non_essential,
+			 clk_modules_hw_auto_non_essential,
+			 clk_modules_explicit_en_non_essential,
+			 0);
+
+	/* Put camera module in no sleep mode */
+	clrsetbits_le32((*prcm)->cm_cam_clkstctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+}
 
 void hw_data_init(void)
 {
-	*prcm = &omap4_prcm;
+	u32 omap_rev = omap_revision();
+
+	(*prcm) = &omap4_prcm;
+
+	switch (omap_rev) {
+
+	case OMAP4430_ES1_0:
+	*dplls_data = &omap4430_dplls_es1;
+	break;
+
+	case OMAP4430_ES2_0:
+	case OMAP4430_ES2_1:
+	case OMAP4430_ES2_2:
+	case OMAP4430_ES2_3:
+	*dplls_data = &omap4430_dplls;
+	break;
+
+	case OMAP4460_ES1_0:
+	case OMAP4460_ES1_1:
+	*dplls_data = &omap4460_dplls;
+	break;
+
+	default:
+		printf("\n INVALID OMAP REVISION ");
+	}
+
 }
diff --git a/arch/arm/cpu/armv7/omap5/clocks.c b/arch/arm/cpu/armv7/omap5/clocks.c
index a90f9222ca..da5b3acf1e 100644
--- a/arch/arm/cpu/armv7/omap5/clocks.c
+++ b/arch/arm/cpu/armv7/omap5/clocks.c
@@ -47,210 +47,6 @@
 #define puts(s)
 #endif
 
-const u32 sys_clk_array[8] = {
-	12000000,	       /* 12 MHz */
-	0,		       /* NA */
-	16800000,	       /* 16.8 MHz */
-	19200000,	       /* 19.2 MHz */
-	26000000,	       /* 26 MHz */
-	0,		       /* NA */
-	38400000,	       /* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = {
-	{125, 0, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{625, 6, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{625, 7, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{750, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{625, 15, 1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_2ghz[NUM_SYS_CLKS] = {
-	{500, 2, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{2024, 16, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{625, 5, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{1000, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{625, 11, 1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = {
-	{275, 2, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{1375, 20, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{1375, 23, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{550, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{1375, 47, 1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = {
-	{200, 2, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{1000, 20, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{375, 8, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{400, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{375, 17, 1, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = {
-	{200, 2, 2, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{1000, 20, 2, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{375, 8, 2, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{400, 12, 2, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{375, 17, 2, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
-};
-
-static const struct dpll_params mpu_dpll_params_550mhz[NUM_SYS_CLKS] = {
-	{275, 2, 2, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{1375, 20, 2, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{1375, 23, 2, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{550, 12, 2, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{1375, 47, 2, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-static const struct dpll_params
-			core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = {
-	{266, 2, 2, 5, 8, 4, 62, 5, 5, 7},		/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{570, 8, 2, 5, 8, 4, 62, 5, 5, 7},		/* 16.8 MHz */
-	{665, 11, 2, 5, 8, 4, 62, 5, 5, 7},		/* 19.2 MHz */
-	{532, 12, 2, 5, 8, 4, 62, 5, 5, 7},		/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{665, 23, 2, 5, 8, 4, 62, 5, 5, 7}		/* 38.4 MHz */
-};
-
-static const struct dpll_params
-			core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = {
-	{266, 2, 4, 5, 8, 8, 62, 10, 10, 14},		/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{570, 8, 4, 5, 8, 8, 62, 10, 10, 14},		/* 16.8 MHz */
-	{665, 11, 4, 5, 8, 8, 62, 10, 10, 14},		/* 19.2 MHz */
-	{532, 12, 4, 8, 8, 8, 62, 10, 10, 14},		/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{665, 23, 4, 8, 8, 8, 62, 10, 10, 14}		/* 38.4 MHz */
-};
-
-static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = {
-	{32, 0, 4, 3, 6, 4, -1, 2, -1, -1},		/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{160, 6, 4, 3, 6, 4, -1, 2, -1, -1},		/* 16.8 MHz */
-	{20, 0, 4, 3, 6, 4, -1, 2, -1, -1},		/* 19.2 MHz */
-	{192, 12, 4, 3, 6, 4, -1, 2, -1, -1},		/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{10, 0, 4, 3, 6, 4, -1, 2, -1, -1}		/* 38.4 MHz */
-};
-
-static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
-	{1165, 11, -1, -1, 5, 6, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{2011, 28, -1, -1, 5, 6, -1, -1, -1, -1},	/* 16.8 MHz */
-	{1881, 30, -1, -1, 5, 6, -1, -1, -1, -1},	/* 19.2 MHz */
-	{1165, 25, -1, -1, 5, 6, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{1972, 64, -1, -1, 5, 6, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-/* ABE M & N values with sys_clk as source */
-static const struct dpll_params
-		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
-	{49, 5, 1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{35, 5, 1, 1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
-	{46, 8, 1, 1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
-	{34, 8, 1, 1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{64, 24, 1, 1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
-};
-
-/* ABE M & N values with 32K clock as source */
-static const struct dpll_params abe_dpll_params_32k_196608khz = {
-	750, 0, 1, 1, -1, -1, -1, -1, -1, -1
-};
-
-static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
-	{400, 4, 2, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
-	{400, 6, 2, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
-	{400, 7, 2, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
-	{480, 12, 2, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
-	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
-	{400, 15, 2, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
-};
-
-void setup_post_dividers(u32 const base, const struct dpll_params *params)
-{
-	struct dpll_regs *const dpll_regs = (struct dpll_regs *)base;
-
-	/* Setup post-dividers */
-	if (params->m2 >= 0)
-		writel(params->m2, &dpll_regs->cm_div_m2_dpll);
-	if (params->m3 >= 0)
-		writel(params->m3, &dpll_regs->cm_div_m3_dpll);
-	if (params->h11 >= 0)
-		writel(params->h11, &dpll_regs->cm_div_h11_dpll);
-	if (params->h12 >= 0)
-		writel(params->h12, &dpll_regs->cm_div_h12_dpll);
-	if (params->h13 >= 0)
-		writel(params->h13, &dpll_regs->cm_div_h13_dpll);
-	if (params->h14 >= 0)
-		writel(params->h14, &dpll_regs->cm_div_h14_dpll);
-	if (params->h22 >= 0)
-		writel(params->h22, &dpll_regs->cm_div_h22_dpll);
-	if (params->h23 >= 0)
-		writel(params->h23, &dpll_regs->cm_div_h23_dpll);
-}
-
-const struct dpll_params *get_mpu_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-	return &mpu_dpll_params_800mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_core_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-
-	/* Configuring the DDR to be at 532mhz */
-	return &core_dpll_params_2128mhz_ddr532[sysclk_ind];
-}
-
-const struct dpll_params *get_per_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-	return &per_dpll_params_768mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_iva_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-	return &iva_dpll_params_2330mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_usb_dpll_params(void)
-{
-	u32 sysclk_ind = get_sys_clk_index();
-	return &usb_dpll_params_1920mhz[sysclk_ind];
-}
-
-const struct dpll_params *get_abe_dpll_params(void)
-{
-#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
-	u32 sysclk_ind = get_sys_clk_index();
-	return &abe_dpll_params_sysclk_196608khz[sysclk_ind];
-#else
-	return &abe_dpll_params_32k_196608khz;
-#endif
-}
-
 /*
  * Setup the voltages for vdd_mpu, vdd_core, and vdd_iva
  * We set the maximum voltages allowed here because Smart-Reflex is not
@@ -300,195 +96,3 @@ u32 get_offset_code(u32 volt_offset)
 	 */
 	return offset_code + 6;
 }
-
-/*
- * Enable essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_basic_clocks(void)
-{
-	u32 const clk_domains_essential[] = {
-		(*prcm)->cm_l4per_clkstctrl,
-		(*prcm)->cm_l3init_clkstctrl,
-		(*prcm)->cm_memif_clkstctrl,
-		(*prcm)->cm_l4cfg_clkstctrl,
-		0
-	};
-
-	u32 const clk_modules_hw_auto_essential[] = {
-		(*prcm)->cm_l3_2_gpmc_clkctrl,
-		(*prcm)->cm_memif_emif_1_clkctrl,
-		(*prcm)->cm_memif_emif_2_clkctrl,
-		(*prcm)->cm_l4cfg_l4_cfg_clkctrl,
-		(*prcm)->cm_wkup_gpio1_clkctrl,
-		(*prcm)->cm_l4per_gpio2_clkctrl,
-		(*prcm)->cm_l4per_gpio3_clkctrl,
-		(*prcm)->cm_l4per_gpio4_clkctrl,
-		(*prcm)->cm_l4per_gpio5_clkctrl,
-		(*prcm)->cm_l4per_gpio6_clkctrl,
-		0
-	};
-
-	u32 const clk_modules_explicit_en_essential[] = {
-		(*prcm)->cm_wkup_gptimer1_clkctrl,
-		(*prcm)->cm_l3init_hsmmc1_clkctrl,
-		(*prcm)->cm_l3init_hsmmc2_clkctrl,
-		(*prcm)->cm_l4per_gptimer2_clkctrl,
-		(*prcm)->cm_wkup_wdtimer2_clkctrl,
-		(*prcm)->cm_l4per_uart3_clkctrl,
-		(*prcm)->cm_l4per_i2c1_clkctrl,
-		0
-	};
-
-	/* Enable optional additional functional clock for GPIO4 */
-	setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl,
-			GPIO4_CLKCTRL_OPTFCLKEN_MASK);
-
-	/* Enable 96 MHz clock for MMC1 & MMC2 */
-	setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
-			HSMMC_CLKCTRL_CLKSEL_MASK);
-	setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
-			HSMMC_CLKCTRL_CLKSEL_MASK);
-
-	/* Set the correct clock dividers for mmc */
-	setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
-			HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
-	setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
-			HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
-
-	/* Select 32KHz clock as the source of GPTIMER1 */
-	setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl,
-			GPTIMER1_CLKCTRL_CLKSEL_MASK);
-
-	do_enable_clocks(clk_domains_essential,
-			 clk_modules_hw_auto_essential,
-			 clk_modules_explicit_en_essential,
-			 1);
-
-	/* Select 384Mhz for GPU as its the POR for ES1.0 */
-	setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
-			CLKSEL_GPU_HYD_GCLK_MASK);
-	setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
-			CLKSEL_GPU_CORE_GCLK_MASK);
-
-	/* Enable SCRM OPT clocks for PER and CORE dpll */
-	setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
-			OPTFCLKEN_SCRM_PER_MASK);
-	setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
-			OPTFCLKEN_SCRM_CORE_MASK);
-}
-
-void enable_basic_uboot_clocks(void)
-{
-	u32 const clk_domains_essential[] = {
-		0
-	};
-
-	u32 const clk_modules_hw_auto_essential[] = {
-		0
-	};
-
-	u32 const clk_modules_explicit_en_essential[] = {
-		(*prcm)->cm_l4per_mcspi1_clkctrl,
-		(*prcm)->cm_l4per_i2c2_clkctrl,
-		(*prcm)->cm_l4per_i2c3_clkctrl,
-		(*prcm)->cm_l4per_i2c4_clkctrl,
-		(*prcm)->cm_l3init_hsusbtll_clkctrl,
-		(*prcm)->cm_l3init_hsusbhost_clkctrl,
-		(*prcm)->cm_l3init_fsusb_clkctrl,
-		0
-	};
-
-	do_enable_clocks(clk_domains_essential,
-			 clk_modules_hw_auto_essential,
-			 clk_modules_explicit_en_essential,
-			 1);
-}
-
-/*
- * Enable non-essential clock domains, modules and
- * do some additional special settings needed
- */
-void enable_non_essential_clocks(void)
-{
-	u32 const clk_domains_non_essential[] = {
-		(*prcm)->cm_mpu_m3_clkstctrl,
-		(*prcm)->cm_ivahd_clkstctrl,
-		(*prcm)->cm_dsp_clkstctrl,
-		(*prcm)->cm_dss_clkstctrl,
-		(*prcm)->cm_sgx_clkstctrl,
-		(*prcm)->cm1_abe_clkstctrl,
-		(*prcm)->cm_c2c_clkstctrl,
-		(*prcm)->cm_cam_clkstctrl,
-		(*prcm)->cm_dss_clkstctrl,
-		(*prcm)->cm_sdma_clkstctrl,
-		0
-	};
-
-	u32 const clk_modules_hw_auto_non_essential[] = {
-		(*prcm)->cm_mpu_m3_mpu_m3_clkctrl,
-		(*prcm)->cm_ivahd_ivahd_clkctrl,
-		(*prcm)->cm_ivahd_sl2_clkctrl,
-		(*prcm)->cm_dsp_dsp_clkctrl,
-		(*prcm)->cm_l3instr_l3_3_clkctrl,
-		(*prcm)->cm_l3instr_l3_instr_clkctrl,
-		(*prcm)->cm_l3instr_intrconn_wp1_clkctrl,
-		(*prcm)->cm_l3init_hsi_clkctrl,
-		(*prcm)->cm_l4per_hdq1w_clkctrl,
-		0
-	};
-
-	u32 const clk_modules_explicit_en_non_essential[] = {
-		(*prcm)->cm1_abe_aess_clkctrl,
-		(*prcm)->cm1_abe_pdm_clkctrl,
-		(*prcm)->cm1_abe_dmic_clkctrl,
-		(*prcm)->cm1_abe_mcasp_clkctrl,
-		(*prcm)->cm1_abe_mcbsp1_clkctrl,
-		(*prcm)->cm1_abe_mcbsp2_clkctrl,
-		(*prcm)->cm1_abe_mcbsp3_clkctrl,
-		(*prcm)->cm1_abe_slimbus_clkctrl,
-		(*prcm)->cm1_abe_timer5_clkctrl,
-		(*prcm)->cm1_abe_timer6_clkctrl,
-		(*prcm)->cm1_abe_timer7_clkctrl,
-		(*prcm)->cm1_abe_timer8_clkctrl,
-		(*prcm)->cm1_abe_wdt3_clkctrl,
-		(*prcm)->cm_l4per_gptimer9_clkctrl,
-		(*prcm)->cm_l4per_gptimer10_clkctrl,
-		(*prcm)->cm_l4per_gptimer11_clkctrl,
-		(*prcm)->cm_l4per_gptimer3_clkctrl,
-		(*prcm)->cm_l4per_gptimer4_clkctrl,
-		(*prcm)->cm_l4per_mcspi2_clkctrl,
-		(*prcm)->cm_l4per_mcspi3_clkctrl,
-		(*prcm)->cm_l4per_mcspi4_clkctrl,
-		(*prcm)->cm_l4per_mmcsd3_clkctrl,
-		(*prcm)->cm_l4per_mmcsd4_clkctrl,
-		(*prcm)->cm_l4per_mmcsd5_clkctrl,
-		(*prcm)->cm_l4per_uart1_clkctrl,
-		(*prcm)->cm_l4per_uart2_clkctrl,
-		(*prcm)->cm_l4per_uart4_clkctrl,
-		(*prcm)->cm_wkup_keyboard_clkctrl,
-		(*prcm)->cm_wkup_wdtimer2_clkctrl,
-		(*prcm)->cm_cam_iss_clkctrl,
-		(*prcm)->cm_cam_fdif_clkctrl,
-		(*prcm)->cm_dss_dss_clkctrl,
-		(*prcm)->cm_sgx_sgx_clkctrl,
-		0
-	};
-
-	/* Enable optional functional clock for ISS */
-	setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
-
-	/* Enable all optional functional clocks of DSS */
-	setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
-
-	do_enable_clocks(clk_domains_non_essential,
-			 clk_modules_hw_auto_non_essential,
-			 clk_modules_explicit_en_non_essential,
-			 0);
-
-	/* Put camera module in no sleep mode */
-	clrsetbits_le32((*prcm)->cm_cam_clkstctrl,
-			MODULE_CLKCTRL_MODULEMODE_MASK,
-			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
-			MODULE_CLKCTRL_MODULEMODE_SHIFT);
-}
diff --git a/arch/arm/cpu/armv7/omap5/hw_data.c b/arch/arm/cpu/armv7/omap5/hw_data.c
index 0f1234c1eb..df375f99a6 100644
--- a/arch/arm/cpu/armv7/omap5/hw_data.c
+++ b/arch/arm/cpu/armv7/omap5/hw_data.c
@@ -27,12 +27,367 @@
  */
 #include <common.h>
 #include <asm/arch/omap.h>
+#include <asm/arch/sys_proto.h>
 #include <asm/omap_common.h>
+#include <asm/arch/clocks.h>
+#include <asm/io.h>
 
 struct prcm_regs const **prcm =
 			(struct prcm_regs const **) OMAP_SRAM_SCRATCH_PRCM_PTR;
+struct dplls const **dplls_data =
+			(struct dplls const **) OMAP_SRAM_SCRATCH_DPLLS_PTR;
+
+static const struct dpll_params mpu_dpll_params_1_5ghz[NUM_SYS_CLKS] = {
+	{125, 0, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{625, 6, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{625, 7, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{750, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{625, 15, 1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params mpu_dpll_params_2ghz[NUM_SYS_CLKS] = {
+	{500, 2, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{2024, 16, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{625, 5, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{1000, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{625, 11, 1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params mpu_dpll_params_1100mhz[NUM_SYS_CLKS] = {
+	{275, 2, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{1375, 20, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{1375, 23, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{550, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{1375, 47, 1, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params mpu_dpll_params_800mhz[NUM_SYS_CLKS] = {
+	{200, 2, 1, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{1000, 20, 1, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{375, 8, 1, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{400, 12, 1, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{375, 17, 1, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+static const struct dpll_params mpu_dpll_params_400mhz[NUM_SYS_CLKS] = {
+	{200, 2, 2, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{1000, 20, 2, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{375, 8, 2, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{400, 12, 2, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{375, 17, 2, -1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+static const struct dpll_params mpu_dpll_params_550mhz[NUM_SYS_CLKS] = {
+	{275, 2, 2, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{1375, 20, 2, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{1375, 23, 2, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{550, 12, 2, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{1375, 47, 2, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+static const struct dpll_params
+			core_dpll_params_2128mhz_ddr532[NUM_SYS_CLKS] = {
+	{266, 2, 2, 5, 8, 4, 62, 5, 5, 7},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{570, 8, 2, 5, 8, 4, 62, 5, 5, 7},		/* 16.8 MHz */
+	{665, 11, 2, 5, 8, 4, 62, 5, 5, 7},		/* 19.2 MHz */
+	{532, 12, 2, 5, 8, 4, 62, 5, 5, 7},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{665, 23, 2, 5, 8, 4, 62, 5, 5, 7}		/* 38.4 MHz */
+};
+
+static const struct dpll_params
+			core_dpll_params_2128mhz_ddr266[NUM_SYS_CLKS] = {
+	{266, 2, 4, 5, 8, 8, 62, 10, 10, 14},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{570, 8, 4, 5, 8, 8, 62, 10, 10, 14},		/* 16.8 MHz */
+	{665, 11, 4, 5, 8, 8, 62, 10, 10, 14},		/* 19.2 MHz */
+	{532, 12, 4, 8, 8, 8, 62, 10, 10, 14},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{665, 23, 4, 8, 8, 8, 62, 10, 10, 14}		/* 38.4 MHz */
+};
+
+static const struct dpll_params per_dpll_params_768mhz[NUM_SYS_CLKS] = {
+	{32, 0, 4, 3, 6, 4, -1, 2, -1, -1},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{160, 6, 4, 3, 6, 4, -1, 2, -1, -1},		/* 16.8 MHz */
+	{20, 0, 4, 3, 6, 4, -1, 2, -1, -1},		/* 19.2 MHz */
+	{192, 12, 4, 3, 6, 4, -1, 2, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{10, 0, 4, 3, 6, 4, -1, 2, -1, -1}		/* 38.4 MHz */
+};
+
+static const struct dpll_params iva_dpll_params_2330mhz[NUM_SYS_CLKS] = {
+	{1165, 11, -1, -1, 5, 6, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{2011, 28, -1, -1, 5, 6, -1, -1, -1, -1},	/* 16.8 MHz */
+	{1881, 30, -1, -1, 5, 6, -1, -1, -1, -1},	/* 19.2 MHz */
+	{1165, 25, -1, -1, 5, 6, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{1972, 64, -1, -1, 5, 6, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+/* ABE M & N values with sys_clk as source */
+static const struct dpll_params
+		abe_dpll_params_sysclk_196608khz[NUM_SYS_CLKS] = {
+	{49, 5, 1, -1, -1, -1, -1, -1, -1, -1},		/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{35, 5, 1, 1, -1, -1, -1, -1, -1, -1},		/* 16.8 MHz */
+	{46, 8, 1, 1, -1, -1, -1, -1, -1, -1},		/* 19.2 MHz */
+	{34, 8, 1, 1, -1, -1, -1, -1, -1, -1},		/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{64, 24, 1, 1, -1, -1, -1, -1, -1, -1}		/* 38.4 MHz */
+};
+
+/* ABE M & N values with 32K clock as source */
+static const struct dpll_params abe_dpll_params_32k_196608khz = {
+	750, 0, 1, 1, -1, -1, -1, -1, -1, -1
+};
+
+static const struct dpll_params usb_dpll_params_1920mhz[NUM_SYS_CLKS] = {
+	{400, 4, 2, -1, -1, -1, -1, -1, -1, -1},	/* 12 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 13 MHz   */
+	{400, 6, 2, -1, -1, -1, -1, -1, -1, -1},	/* 16.8 MHz */
+	{400, 7, 2, -1, -1, -1, -1, -1, -1, -1},	/* 19.2 MHz */
+	{480, 12, 2, -1, -1, -1, -1, -1, -1, -1},	/* 26 MHz   */
+	{-1, -1, -1, -1, -1, -1, -1, -1, -1, -1},	/* 27 MHz   */
+	{400, 15, 2, -1, -1, -1, -1, -1, -1, -1}	/* 38.4 MHz */
+};
+
+struct dplls omap5_dplls_es1 = {
+	.mpu = mpu_dpll_params_800mhz,
+	.core = core_dpll_params_2128mhz_ddr532,
+	.per = per_dpll_params_768mhz,
+	.iva = iva_dpll_params_2330mhz,
+#ifdef CONFIG_SYS_OMAP_ABE_SYSCK
+	.abe = abe_dpll_params_sysclk_196608khz,
+#else
+	.abe = &abe_dpll_params_32k_196608khz,
+#endif
+	.usb = usb_dpll_params_1920mhz
+};
+
+/*
+ * Enable essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_basic_clocks(void)
+{
+	u32 const clk_domains_essential[] = {
+		(*prcm)->cm_l4per_clkstctrl,
+		(*prcm)->cm_l3init_clkstctrl,
+		(*prcm)->cm_memif_clkstctrl,
+		(*prcm)->cm_l4cfg_clkstctrl,
+		0
+	};
+
+	u32 const clk_modules_hw_auto_essential[] = {
+		(*prcm)->cm_l3_2_gpmc_clkctrl,
+		(*prcm)->cm_memif_emif_1_clkctrl,
+		(*prcm)->cm_memif_emif_2_clkctrl,
+		(*prcm)->cm_l4cfg_l4_cfg_clkctrl,
+		(*prcm)->cm_wkup_gpio1_clkctrl,
+		(*prcm)->cm_l4per_gpio2_clkctrl,
+		(*prcm)->cm_l4per_gpio3_clkctrl,
+		(*prcm)->cm_l4per_gpio4_clkctrl,
+		(*prcm)->cm_l4per_gpio5_clkctrl,
+		(*prcm)->cm_l4per_gpio6_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_essential[] = {
+		(*prcm)->cm_wkup_gptimer1_clkctrl,
+		(*prcm)->cm_l3init_hsmmc1_clkctrl,
+		(*prcm)->cm_l3init_hsmmc2_clkctrl,
+		(*prcm)->cm_l4per_gptimer2_clkctrl,
+		(*prcm)->cm_wkup_wdtimer2_clkctrl,
+		(*prcm)->cm_l4per_uart3_clkctrl,
+		(*prcm)->cm_l4per_i2c1_clkctrl,
+		0
+	};
+
+	/* Enable optional additional functional clock for GPIO4 */
+	setbits_le32((*prcm)->cm_l4per_gpio4_clkctrl,
+			GPIO4_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable 96 MHz clock for MMC1 & MMC2 */
+	setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+	setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_MASK);
+
+	/* Set the correct clock dividers for mmc */
+	setbits_le32((*prcm)->cm_l3init_hsmmc1_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
+	setbits_le32((*prcm)->cm_l3init_hsmmc2_clkctrl,
+			HSMMC_CLKCTRL_CLKSEL_DIV_MASK);
+
+	/* Select 32KHz clock as the source of GPTIMER1 */
+	setbits_le32((*prcm)->cm_wkup_gptimer1_clkctrl,
+			GPTIMER1_CLKCTRL_CLKSEL_MASK);
+
+	do_enable_clocks(clk_domains_essential,
+			 clk_modules_hw_auto_essential,
+			 clk_modules_explicit_en_essential,
+			 1);
+
+	/* Select 384Mhz for GPU as its the POR for ES1.0 */
+	setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
+			CLKSEL_GPU_HYD_GCLK_MASK);
+	setbits_le32((*prcm)->cm_sgx_sgx_clkctrl,
+			CLKSEL_GPU_CORE_GCLK_MASK);
+
+	/* Enable SCRM OPT clocks for PER and CORE dpll */
+	setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
+			OPTFCLKEN_SCRM_PER_MASK);
+	setbits_le32((*prcm)->cm_wkupaon_scrm_clkctrl,
+			OPTFCLKEN_SCRM_CORE_MASK);
+}
+
+void enable_basic_uboot_clocks(void)
+{
+	u32 const clk_domains_essential[] = {
+		0
+	};
+
+	u32 const clk_modules_hw_auto_essential[] = {
+		0
+	};
+
+	u32 const clk_modules_explicit_en_essential[] = {
+		(*prcm)->cm_l4per_mcspi1_clkctrl,
+		(*prcm)->cm_l4per_i2c2_clkctrl,
+		(*prcm)->cm_l4per_i2c3_clkctrl,
+		(*prcm)->cm_l4per_i2c4_clkctrl,
+		(*prcm)->cm_l3init_hsusbtll_clkctrl,
+		(*prcm)->cm_l3init_hsusbhost_clkctrl,
+		(*prcm)->cm_l3init_fsusb_clkctrl,
+		0
+	};
+
+	do_enable_clocks(clk_domains_essential,
+			 clk_modules_hw_auto_essential,
+			 clk_modules_explicit_en_essential,
+			 1);
+}
+
+/*
+ * Enable non-essential clock domains, modules and
+ * do some additional special settings needed
+ */
+void enable_non_essential_clocks(void)
+{
+	u32 const clk_domains_non_essential[] = {
+		(*prcm)->cm_mpu_m3_clkstctrl,
+		(*prcm)->cm_ivahd_clkstctrl,
+		(*prcm)->cm_dsp_clkstctrl,
+		(*prcm)->cm_dss_clkstctrl,
+		(*prcm)->cm_sgx_clkstctrl,
+		(*prcm)->cm1_abe_clkstctrl,
+		(*prcm)->cm_c2c_clkstctrl,
+		(*prcm)->cm_cam_clkstctrl,
+		(*prcm)->cm_dss_clkstctrl,
+		(*prcm)->cm_sdma_clkstctrl,
+		0
+	};
+
+	u32 const clk_modules_hw_auto_non_essential[] = {
+		(*prcm)->cm_mpu_m3_mpu_m3_clkctrl,
+		(*prcm)->cm_ivahd_ivahd_clkctrl,
+		(*prcm)->cm_ivahd_sl2_clkctrl,
+		(*prcm)->cm_dsp_dsp_clkctrl,
+		(*prcm)->cm_l3instr_l3_3_clkctrl,
+		(*prcm)->cm_l3instr_l3_instr_clkctrl,
+		(*prcm)->cm_l3instr_intrconn_wp1_clkctrl,
+		(*prcm)->cm_l3init_hsi_clkctrl,
+		(*prcm)->cm_l4per_hdq1w_clkctrl,
+		0
+	};
+
+	u32 const clk_modules_explicit_en_non_essential[] = {
+		(*prcm)->cm1_abe_aess_clkctrl,
+		(*prcm)->cm1_abe_pdm_clkctrl,
+		(*prcm)->cm1_abe_dmic_clkctrl,
+		(*prcm)->cm1_abe_mcasp_clkctrl,
+		(*prcm)->cm1_abe_mcbsp1_clkctrl,
+		(*prcm)->cm1_abe_mcbsp2_clkctrl,
+		(*prcm)->cm1_abe_mcbsp3_clkctrl,
+		(*prcm)->cm1_abe_slimbus_clkctrl,
+		(*prcm)->cm1_abe_timer5_clkctrl,
+		(*prcm)->cm1_abe_timer6_clkctrl,
+		(*prcm)->cm1_abe_timer7_clkctrl,
+		(*prcm)->cm1_abe_timer8_clkctrl,
+		(*prcm)->cm1_abe_wdt3_clkctrl,
+		(*prcm)->cm_l4per_gptimer9_clkctrl,
+		(*prcm)->cm_l4per_gptimer10_clkctrl,
+		(*prcm)->cm_l4per_gptimer11_clkctrl,
+		(*prcm)->cm_l4per_gptimer3_clkctrl,
+		(*prcm)->cm_l4per_gptimer4_clkctrl,
+		(*prcm)->cm_l4per_mcspi2_clkctrl,
+		(*prcm)->cm_l4per_mcspi3_clkctrl,
+		(*prcm)->cm_l4per_mcspi4_clkctrl,
+		(*prcm)->cm_l4per_mmcsd3_clkctrl,
+		(*prcm)->cm_l4per_mmcsd4_clkctrl,
+		(*prcm)->cm_l4per_mmcsd5_clkctrl,
+		(*prcm)->cm_l4per_uart1_clkctrl,
+		(*prcm)->cm_l4per_uart2_clkctrl,
+		(*prcm)->cm_l4per_uart4_clkctrl,
+		(*prcm)->cm_wkup_keyboard_clkctrl,
+		(*prcm)->cm_wkup_wdtimer2_clkctrl,
+		(*prcm)->cm_cam_iss_clkctrl,
+		(*prcm)->cm_cam_fdif_clkctrl,
+		(*prcm)->cm_dss_dss_clkctrl,
+		(*prcm)->cm_sgx_sgx_clkctrl,
+		0
+	};
+
+	/* Enable optional functional clock for ISS */
+	setbits_le32((*prcm)->cm_cam_iss_clkctrl, ISS_CLKCTRL_OPTFCLKEN_MASK);
+
+	/* Enable all optional functional clocks of DSS */
+	setbits_le32((*prcm)->cm_dss_dss_clkctrl, DSS_CLKCTRL_OPTFCLKEN_MASK);
+
+	do_enable_clocks(clk_domains_non_essential,
+			 clk_modules_hw_auto_non_essential,
+			 clk_modules_explicit_en_non_essential,
+			 0);
+
+	/* Put camera module in no sleep mode */
+	clrsetbits_le32((*prcm)->cm_cam_clkstctrl,
+			MODULE_CLKCTRL_MODULEMODE_MASK,
+			CD_CLKCTRL_CLKTRCTRL_NO_SLEEP <<
+			MODULE_CLKCTRL_MODULEMODE_SHIFT);
+}
 
 void hw_data_init(void)
 {
+	u32 omap_rev = omap_revision();
+
+	switch (omap_rev) {
+
+	case OMAP5430_ES1_0:
 	*prcm = &omap5_es1_prcm;
+	*dplls_data = &omap5_dplls_es1;
+	break;
+
+	case OMAP5432_ES1_0:
+	*prcm = &omap5_es1_prcm;
+	*dplls_data = &omap5_dplls_es1;
+	break;
+
+	default:
+		printf("\n INVALID OMAP REVISION ");
+	}
 }
diff --git a/arch/arm/include/asm/arch-omap4/clocks.h b/arch/arm/include/asm/arch-omap4/clocks.h
index 4710d88b4d..ceb3367449 100644
--- a/arch/arm/include/asm/arch-omap4/clocks.h
+++ b/arch/arm/include/asm/arch-omap4/clocks.h
@@ -242,55 +242,10 @@
 #define DPLL_NO_LOCK	0
 #define DPLL_LOCK	1
 
-#define NUM_SYS_CLKS	7
-
-struct dpll_regs {
-	u32 cm_clkmode_dpll;
-	u32 cm_idlest_dpll;
-	u32 cm_autoidle_dpll;
-	u32 cm_clksel_dpll;
-	u32 cm_div_m2_dpll;
-	u32 cm_div_m3_dpll;
-	u32 cm_div_m4_dpll;
-	u32 cm_div_m5_dpll;
-	u32 cm_div_m6_dpll;
-	u32 cm_div_m7_dpll;
-};
-
-/* DPLL parameter table */
-struct dpll_params {
-	u32 m;
-	u32 n;
-	s8 m2;
-	s8 m3;
-	s8 m4;
-	s8 m5;
-	s8 m6;
-	s8 m7;
-};
-
-extern const u32 sys_clk_array[8];
-
 void scale_vcores(void);
 void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv);
 u32 get_offset_code(u32 offset);
-u32 omap_ddr_clk(void);
 void do_scale_vcore(u32 vcore_reg, u32 volt_mv);
-void setup_post_dividers(u32 const base, const struct dpll_params *params);
-u32 get_sys_clk_index(void);
-void enable_basic_clocks(void);
-void enable_basic_uboot_clocks(void);
-void enable_non_essential_clocks(void);
-void do_enable_clocks(u32 const *clk_domains,
-		      u32 const *clk_modules_hw_auto,
-		      u32 const *clk_modules_explicit_en,
-		      u8 wait_for_enable);
-const struct dpll_params *get_mpu_dpll_params(void);
-const struct dpll_params *get_core_dpll_params(void);
-const struct dpll_params *get_per_dpll_params(void);
-const struct dpll_params *get_iva_dpll_params(void);
-const struct dpll_params *get_usb_dpll_params(void);
-const struct dpll_params *get_abe_dpll_params(void);
 
 struct omap4_scrm_regs {
 	u32 revision;           /* 0x0000 */
diff --git a/arch/arm/include/asm/arch-omap4/omap.h b/arch/arm/include/asm/arch-omap4/omap.h
index 86ba3359ec..1c0ce9b38b 100644
--- a/arch/arm/include/asm/arch-omap4/omap.h
+++ b/arch/arm/include/asm/arch-omap4/omap.h
@@ -179,7 +179,8 @@ struct control_lpddr2io_regs {
 #define OMAP4_SRAM_SCRATCH_EMIF_T_NUM	(SRAM_SCRATCH_SPACE_ADDR + 0xC)
 #define OMAP4_SRAM_SCRATCH_EMIF_T_DEN	(SRAM_SCRATCH_SPACE_ADDR + 0x10)
 #define OMAP_SRAM_SCRATCH_PRCM_PTR      (SRAM_SCRATCH_SPACE_ADDR + 0x14)
-#define OMAP4_SRAM_SCRATCH_SPACE_END	(SRAM_SCRATCH_SPACE_ADDR + 0x18)
+#define OMAP_SRAM_SCRATCH_DPLLS_PTR     (SRAM_SCRATCH_SPACE_ADDR + 0x18)
+#define OMAP4_SRAM_SCRATCH_SPACE_END	(SRAM_SCRATCH_SPACE_ADDR + 0x1C)
 
 /* ROM code defines */
 /* Boot device */
diff --git a/arch/arm/include/asm/arch-omap5/clocks.h b/arch/arm/include/asm/arch-omap5/clocks.h
index 67e74ca402..063347f69e 100644
--- a/arch/arm/include/asm/arch-omap5/clocks.h
+++ b/arch/arm/include/asm/arch-omap5/clocks.h
@@ -234,58 +234,8 @@
 #define DPLL_NO_LOCK	0
 #define DPLL_LOCK	1
 
-#define NUM_SYS_CLKS	7
-
-struct dpll_regs {
-	u32 cm_clkmode_dpll;
-	u32 cm_idlest_dpll;
-	u32 cm_autoidle_dpll;
-	u32 cm_clksel_dpll;
-	u32 cm_div_m2_dpll;
-	u32 cm_div_m3_dpll;
-	u32 cm_div_h11_dpll;
-	u32 cm_div_h12_dpll;
-	u32 cm_div_h13_dpll;
-	u32 cm_div_h14_dpll;
-	u32 reserved[3];
-	u32 cm_div_h22_dpll;
-	u32 cm_div_h23_dpll;
-};
-
-/* DPLL parameter table */
-struct dpll_params {
-	u32 m;
-	u32 n;
-	s8 m2;
-	s8 m3;
-	s8 h11;
-	s8 h12;
-	s8 h13;
-	s8 h14;
-	s8 h22;
-	s8 h23;
-};
-
-extern const u32 sys_clk_array[8];
-
 void scale_vcores(void);
 void do_scale_tps62361(int gpio, u32 reg, u32 volt_mv);
 u32 get_offset_code(u32 offset);
-u32 omap_ddr_clk(void);
 void do_scale_vcore(u32 vcore_reg, u32 volt_mv);
-void setup_post_dividers(u32 const base, const struct dpll_params *params);
-u32 get_sys_clk_index(void);
-void enable_basic_clocks(void);
-void enable_non_essential_clocks(void);
-void enable_basic_uboot_clocks(void);
-void do_enable_clocks(u32 const *clk_domains,
-		      u32 const *clk_modules_hw_auto,
-		      u32 const *clk_modules_explicit_en,
-		      u8 wait_for_enable);
-const struct dpll_params *get_mpu_dpll_params(void);
-const struct dpll_params *get_core_dpll_params(void);
-const struct dpll_params *get_per_dpll_params(void);
-const struct dpll_params *get_iva_dpll_params(void);
-const struct dpll_params *get_usb_dpll_params(void);
-const struct dpll_params *get_abe_dpll_params(void);
 #endif /* _CLOCKS_OMAP5_H_ */
diff --git a/arch/arm/include/asm/arch-omap5/omap.h b/arch/arm/include/asm/arch-omap5/omap.h
index 50e055ec67..7123694045 100644
--- a/arch/arm/include/asm/arch-omap5/omap.h
+++ b/arch/arm/include/asm/arch-omap5/omap.h
@@ -272,7 +272,8 @@ struct omap_sys_ctrl_regs {
 #define OMAP5_SRAM_SCRATCH_EMIF_T_NUM	(SRAM_SCRATCH_SPACE_ADDR + 0xC)
 #define OMAP5_SRAM_SCRATCH_EMIF_T_DEN	(SRAM_SCRATCH_SPACE_ADDR + 0x10)
 #define OMAP_SRAM_SCRATCH_PRCM_PTR      (SRAM_SCRATCH_SPACE_ADDR + 0x14)
-#define OMAP5_SRAM_SCRATCH_SPACE_END	(SRAM_SCRATCH_SPACE_ADDR + 0x18)
+#define OMAP_SRAM_SCRATCH_DPLLS_PTR     (SRAM_SCRATCH_SPACE_ADDR + 0x18)
+#define OMAP5_SRAM_SCRATCH_SPACE_END	(SRAM_SCRATCH_SPACE_ADDR + 0x1C)
 
 /* Silicon revisions */
 #define OMAP4430_SILICON_ID_INVALID	0xFFFFFFFF
diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h
index fcf9ce50d6..c2d8388b32 100644
--- a/arch/arm/include/asm/omap_common.h
+++ b/arch/arm/include/asm/omap_common.h
@@ -27,6 +27,8 @@
 
 #include <common.h>
 
+#define NUM_SYS_CLKS	7
+
 struct prcm_regs {
 	/* cm1.ckgen */
 	u32 cm_clksel_core;
@@ -324,11 +326,72 @@ struct prcm_regs {
 	u32 prm_vc_cfg_channel;
 };
 
+struct dpll_params {
+	u32 m;
+	u32 n;
+	s8 m2;
+	s8 m3;
+	s8 m4_h11;
+	s8 m5_h12;
+	s8 m6_h13;
+	s8 m7_h14;
+	s8 h22;
+	s8 h23;
+};
+
+struct dpll_regs {
+	u32 cm_clkmode_dpll;
+	u32 cm_idlest_dpll;
+	u32 cm_autoidle_dpll;
+	u32 cm_clksel_dpll;
+	u32 cm_div_m2_dpll;
+	u32 cm_div_m3_dpll;
+	u32 cm_div_m4_h11_dpll;
+	u32 cm_div_m5_h12_dpll;
+	u32 cm_div_m6_h13_dpll;
+	u32 cm_div_m7_h14_dpll;
+	u32 reserved[3];
+	u32 cm_div_h22_dpll;
+	u32 cm_div_h23_dpll;
+};
+
+struct dplls {
+	const struct dpll_params *mpu;
+	const struct dpll_params *core;
+	const struct dpll_params *per;
+	const struct dpll_params *abe;
+	const struct dpll_params *iva;
+	const struct dpll_params *usb;
+};
+
 extern struct prcm_regs const **prcm;
 extern struct prcm_regs const omap5_es1_prcm;
 extern struct prcm_regs const omap4_prcm;
+extern struct dplls const **dplls_data;
+extern const u32 sys_clk_array[8];
 
 void hw_data_init(void);
+
+const struct dpll_params *get_mpu_dpll_params(struct dplls const *);
+const struct dpll_params *get_core_dpll_params(struct dplls const *);
+const struct dpll_params *get_per_dpll_params(struct dplls const *);
+const struct dpll_params *get_iva_dpll_params(struct dplls const *);
+const struct dpll_params *get_usb_dpll_params(struct dplls const *);
+const struct dpll_params *get_abe_dpll_params(struct dplls const *);
+
+void do_enable_clocks(u32 const *clk_domains,
+		      u32 const *clk_modules_hw_auto,
+		      u32 const *clk_modules_explicit_en,
+		      u8 wait_for_enable);
+
+void setup_post_dividers(u32 const base,
+			const struct dpll_params *params);
+u32 omap_ddr_clk(void);
+u32 get_sys_clk_index(void);
+void enable_basic_clocks(void);
+void enable_basic_uboot_clocks(void);
+void enable_non_essential_clocks(void);
+
 /* Max value for DPLL multiplier M */
 #define OMAP_DPLL_MAX_N	127