From: Bob Liu Date: Thu, 16 Aug 2012 03:19:08 +0000 (+0800) Subject: blackfin: bf60x: add dma support X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=ee8259623e57acf738aee548a8e9bee0a543f3f0;p=u-boot.git blackfin: bf60x: add dma support Add dma support for bf60x. Signed-off-by: Bob Liu Signed-off-by: Sonic Zhang Signed-off-by: Sonic Zhang --- diff --git a/arch/blackfin/include/asm/dma.h b/arch/blackfin/include/asm/dma.h index 21ff1cf9fb..ef1db6e99c 100644 --- a/arch/blackfin/include/asm/dma.h +++ b/arch/blackfin/include/asm/dma.h @@ -8,7 +8,12 @@ #ifndef _BLACKFIN_DMA_H_ #define _BLACKFIN_DMA_H_ +#include +#ifdef __ADSPBF60x__ +#include +#else #include +#endif struct dmasg_large { void *next_desc_addr; @@ -30,46 +35,70 @@ struct dmasg { } __attribute__((packed)); struct dma_register { +#ifdef __ADSPBF60x__ + void *next_desc_ptr; /* DMA Next Descriptor Pointer register */ + u32 start_addr; /* DMA Start address register */ + u32 config; /* DMA Configuration register */ + + u32 x_count; /* DMA x_count register */ + s32 x_modify; /* DMA x_modify register */ + u32 y_count; /* DMA y_count register */ + s32 y_modify; /* DMA y_modify register */ + u32 __pad0[2]; + + void *curr_desc_ptr; /* DMA Curr Descriptor Pointer register */ + void *prev_desc_ptr; /* DMA Prev Descriptor Pointer register */ + void *curr_addr; /* DMA Current Address Pointer register */ + u32 status; /* DMA irq status register */ + u32 curr_x_count; /* DMA Current x-count register */ + u32 curr_y_count; /* DMA Current y-count register */ + u32 __pad1[2]; + + u32 bw_limit; /* DMA Bandwidth Limit Count */ + u32 curr_bw_limit; /* DMA curr Bandwidth Limit Count */ + u32 bw_monitor; /* DMA Bandwidth Monitor Count */ + u32 curr_bw_monitor; /* DMA curr Bandwidth Monitor Count */ +#else void *next_desc_ptr; /* DMA Next Descriptor Pointer register */ - unsigned long start_addr; /* DMA Start address register */ + u32 start_addr; /* DMA Start address register */ - unsigned short cfg; /* DMA Configuration register */ - unsigned short dummy1; /* DMA Configuration register */ + u16 config; /* DMA Configuration register */ + u16 dummy1; /* DMA Configuration register */ - unsigned long reserved; + u32 reserved; - unsigned short x_count; /* DMA x_count register */ - unsigned short dummy2; + u16 x_count; /* DMA x_count register */ + u16 dummy2; - short x_modify; /* DMA x_modify register */ - unsigned short dummy3; + s16 x_modify; /* DMA x_modify register */ + u16 dummy3; - unsigned short y_count; /* DMA y_count register */ - unsigned short dummy4; + u16 y_count; /* DMA y_count register */ + u16 dummy4; - short y_modify; /* DMA y_modify register */ - unsigned short dummy5; + s16 y_modify; /* DMA y_modify register */ + u16 dummy5; - void *curr_desc_ptr; /* DMA Current Descriptor Pointer - register */ - unsigned long curr_addr_ptr; /* DMA Current Address Pointer - register */ - unsigned short irq_status; /* DMA irq status register */ - unsigned short dummy6; + void *curr_desc_ptr; /* DMA Current Descriptor Pointer register */ - unsigned short peripheral_map; /* DMA peripheral map register */ - unsigned short dummy7; + u32 curr_addr_ptr; /* DMA Current Address Pointer register */ - unsigned short curr_x_count; /* DMA Current x-count register */ - unsigned short dummy8; + u16 status; /* DMA irq status register */ + u16 dummy6; - unsigned long reserved2; + u16 peripheral_map; /* DMA peripheral map register */ + u16 dummy7; - unsigned short curr_y_count; /* DMA Current y-count register */ - unsigned short dummy9; + u16 curr_x_count; /* DMA Current x-count register */ + u16 dummy8; - unsigned long reserved3; + u32 reserved2; + u16 curr_y_count; /* DMA Current y-count register */ + u16 dummy9; + + u32 reserved3; +#endif }; #endif diff --git a/arch/blackfin/include/asm/mach-common/bits/dma.h b/arch/blackfin/include/asm/mach-common/bits/dma.h index 136313e613..ac426addd4 100644 --- a/arch/blackfin/include/asm/mach-common/bits/dma.h +++ b/arch/blackfin/include/asm/mach-common/bits/dma.h @@ -9,14 +9,54 @@ #define DMAEN 0x0001 /* DMA Channel Enable */ #define WNR 0x0002 /* Channel Direction (W/R*) */ #define WDSIZE_8 0x0000 /* Transfer Word Size = 8 */ + +#ifdef CONFIG_BF60x + +#define PSIZE_8 0x00000000 /* Transfer Word Size = 16 */ +#define PSIZE_16 0x00000010 /* Transfer Word Size = 16 */ +#define PSIZE_32 0x00000020 /* Transfer Word Size = 32 */ +#define PSIZE_64 0x00000030 /* Transfer Word Size = 32 */ +#define WDSIZE_16 0x00000100 /* Transfer Word Size = 16 */ +#define WDSIZE_32 0x00000200 /* Transfer Word Size = 32 */ +#define WDSIZE_64 0x00000300 /* Transfer Word Size = 32 */ +#define WDSIZE_128 0x00000400 /* Transfer Word Size = 32 */ +#define WDSIZE_256 0x00000500 /* Transfer Word Size = 32 */ +#define DMA2D 0x04000000 /* DMA Mode (2D/1D*) */ +#define RESTART 0x00000004 /* DMA Buffer Clear SYNC */ +#define DI_EN_X 0x00100000 /* Data Int Enable in X count */ +#define DI_EN_Y 0x00200000 /* Data Int Enable in Y count */ +#define DI_EN_P 0x00300000 /* Data Int Enable in Peri */ +#define DI_EN DI_EN_X /* Data Int Enable */ +#define NDSIZE_0 0x00000000 /* Next Desc Size = 0 */ +#define NDSIZE_1 0x00010000 /* Next Desc Size = 1 */ +#define NDSIZE_2 0x00020000 /* Next Desc Size = 2 */ +#define NDSIZE_3 0x00030000 /* Next Desc Size = 3 */ +#define NDSIZE_4 0x00040000 /* Next Desc Size = 4 */ +#define NDSIZE_5 0x00050000 /* Next Desc Size = 5 */ +#define NDSIZE_6 0x00060000 /* Next Desc Size = 6 */ +#define NDSIZE 0x00070000 /* Next Desc Size */ +#define NDSIZE_OFFSET 16 /* Next Desc Size Offset */ +#define DMAFLOW_LIST 0x00004000 /* Desc List Mode */ +#define DMAFLOW_ARRAY 0x00005000 /* Desc Array Mode */ +#define DMAFLOW_LIST_DEMAND 0x00006000 /* Desc Demand List Mode */ +#define DMAFLOW_ARRAY_DEMAND 0x00007000 /* Desc Demand Array Mode */ +#define DMA_RUN_DFETCH 0x00000100 /* DMA Channel Run (DFETCH) */ +#define DMA_RUN 0x00000200 /* DMA Channel Run */ +#define DMA_RUN_WAIT_TRIG 0x00000300 /* DMA Channel Run (WAIT TRIG)*/ +#define DMA_RUN_WAIT_ACK 0x00000400 /* DMA Channel Run (WAIT ACK) */ + +#else + #define WDSIZE_16 0x0004 /* Transfer Word Size = 16 */ #define WDSIZE_32 0x0008 /* Transfer Word Size = 32 */ +#define PSIZE_16 WDSIZE_16 +#define PSIZE_32 WDSIZE_32 #define DMA2D 0x0010 /* DMA Mode (2D/1D*) */ #define RESTART 0x0020 /* DMA Buffer Clear */ #define DI_SEL 0x0040 /* Data Interrupt Timing Select */ #define DI_EN 0x0080 /* Data Interrupt Enable */ #define NDSIZE 0x0F00 /* Next Descriptor bitmask */ -#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 (Stop/Autobuffer) */ +#define NDSIZE_0 0x0000 /* Next Descriptor Size = 0 */ #define NDSIZE_1 0x0100 /* Next Descriptor Size = 1 */ #define NDSIZE_2 0x0200 /* Next Descriptor Size = 2 */ #define NDSIZE_3 0x0300 /* Next Descriptor Size = 3 */ @@ -26,14 +66,13 @@ #define NDSIZE_7 0x0700 /* Next Descriptor Size = 7 */ #define NDSIZE_8 0x0800 /* Next Descriptor Size = 8 */ #define NDSIZE_9 0x0900 /* Next Descriptor Size = 9 */ -#define FLOW_STOP 0x0000 /* Stop Mode */ -#define FLOW_AUTO 0x1000 /* Autobuffer Mode */ #define FLOW_ARRAY 0x4000 /* Descriptor Array Mode */ #define FLOW_SMALL 0x6000 /* Small Model Descriptor List Mode */ #define FLOW_LARGE 0x7000 /* Large Model Descriptor List Mode */ #define DMAEN_P 0 /* Channel Enable */ #define WNR_P 1 /* Channel Direction (W/R*) */ +#define WDSIZE_P 2 /* Transfer Word Size */ #define DMA2D_P 4 /* 2D/1D* Mode */ #define RESTART_P 5 /* Restart */ #define DI_SEL_P 6 /* Data Interrupt Select */ @@ -45,14 +84,19 @@ #define DFETCH 0x0004 /* DMA Descriptor Fetch Indicator */ #define DMA_RUN 0x0008 /* DMA Channel Running Indicator */ +#endif +#define DMAFLOW 0x7000 /* Flow Control */ +#define FLOW_STOP 0x0000 /* Stop Mode */ +#define FLOW_AUTO 0x1000 /* Autobuffer Mode */ + #define DMA_DONE_P 0 /* DMA Done Indicator */ #define DMA_ERR_P 1 /* DMA Error Indicator */ #define DFETCH_P 2 /* Descriptor Fetch Indicator */ #define DMA_RUN_P 3 /* DMA Running Indicator */ /* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP Masks */ -#define CTYPE 0x0040 /* DMA Channel Type Indicator (Memory/Peripheral*) */ -#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */ +#define CTYPE 0x0040 /* DMA Channel Type (Mem/Peri) */ +#define CTYPE_P 6 /* DMA Channel Type BIT POSITION */ #define PMAP 0xF000 /* Peripheral Mapped To This Channel */ #endif diff --git a/arch/blackfin/lib/string.c b/arch/blackfin/lib/string.c index e344d3b94b..44d8c6d906 100644 --- a/arch/blackfin/lib/string.c +++ b/arch/blackfin/lib/string.c @@ -29,7 +29,7 @@ #include #include #include -#include +#include char *strcpy(char *dest, const char *src) { @@ -117,81 +117,88 @@ int strncmp(const char *cs, const char *ct, size_t count) return __res1; } -#ifdef bfin_write_MDMA1_D0_IRQ_STATUS -# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS -# define bfin_write_MDMA_D0_START_ADDR bfin_write_MDMA1_D0_START_ADDR -# define bfin_write_MDMA_D0_X_COUNT bfin_write_MDMA1_D0_X_COUNT -# define bfin_write_MDMA_D0_X_MODIFY bfin_write_MDMA1_D0_X_MODIFY -# define bfin_write_MDMA_D0_CONFIG bfin_write_MDMA1_D0_CONFIG -# define bfin_write_MDMA_S0_START_ADDR bfin_write_MDMA1_S0_START_ADDR -# define bfin_write_MDMA_S0_X_COUNT bfin_write_MDMA1_S0_X_COUNT -# define bfin_write_MDMA_S0_X_MODIFY bfin_write_MDMA1_S0_X_MODIFY -# define bfin_write_MDMA_S0_CONFIG bfin_write_MDMA1_S0_CONFIG -# define bfin_write_MDMA_D0_IRQ_STATUS bfin_write_MDMA1_D0_IRQ_STATUS -# define bfin_read_MDMA_D0_IRQ_STATUS bfin_read_MDMA1_D0_IRQ_STATUS +#ifdef MDMA1_D0_NEXT_DESC_PTR +# define MDMA_D0_NEXT_DESC_PTR MDMA1_D0_NEXT_DESC_PTR +# define MDMA_S0_NEXT_DESC_PTR MDMA1_S0_NEXT_DESC_PTR #endif + +static void dma_calc_size(unsigned long ldst, unsigned long lsrc, size_t count, + unsigned long *dshift, unsigned long *bpos) +{ + unsigned long limit; + +#ifdef MSIZE + limit = 6; + *dshift = MSIZE_P; +#else + limit = 3; + *dshift = WDSIZE_P; +#endif + + *bpos = min(limit, ffs(ldst | lsrc | count)) - 1; +} + /* This version misbehaves for count values of 0 and 2^16+. * Perhaps we should detect that ? Nowhere do we actually * use dma memcpy for those types of lengths though ... */ void dma_memcpy_nocache(void *dst, const void *src, size_t count) { - uint16_t wdsize, mod; + struct dma_register *mdma_d0 = (void *)MDMA_D0_NEXT_DESC_PTR; + struct dma_register *mdma_s0 = (void *)MDMA_S0_NEXT_DESC_PTR; + unsigned long ldst = (unsigned long)dst; + unsigned long lsrc = (unsigned long)src; + unsigned long dshift, bpos; + uint32_t dsize, mod; /* Disable DMA in case it's still running (older u-boot's did not * always turn them off). Do it before the if statement below so * we can be cheap and not do a SSYNC() due to the forced abort. */ - bfin_write_MDMA_D0_CONFIG(0); - bfin_write_MDMA_S0_CONFIG(0); - bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR); + bfin_write(&mdma_d0->config, 0); + bfin_write(&mdma_s0->config, 0); + bfin_write(&mdma_d0->status, DMA_RUN | DMA_DONE | DMA_ERR); /* Scratchpad cannot be a DMA source or destination */ - if (((unsigned long)src >= L1_SRAM_SCRATCH && - (unsigned long)src < L1_SRAM_SCRATCH_END) || - ((unsigned long)dst >= L1_SRAM_SCRATCH && - (unsigned long)dst < L1_SRAM_SCRATCH_END)) + if ((lsrc >= L1_SRAM_SCRATCH && lsrc < L1_SRAM_SCRATCH_END) || + (ldst >= L1_SRAM_SCRATCH && ldst < L1_SRAM_SCRATCH_END)) hang(); - if (((unsigned long)dst | (unsigned long)src | count) & 0x1) { - wdsize = WDSIZE_8; - mod = 1; - } else if (((unsigned long)dst | (unsigned long)src | count) & 0x2) { - wdsize = WDSIZE_16; - count >>= 1; - mod = 2; - } else { - wdsize = WDSIZE_32; - count >>= 2; - mod = 4; - } + dma_calc_size(ldst, lsrc, count, &dshift, &bpos); + dsize = bpos << dshift; + count >>= bpos; + mod = 1 << bpos; + +#ifdef PSIZE + dsize |= min(3, bpos) << PSIZE_P; +#endif /* Copy sram functions from sdram to sram */ /* Setup destination start address */ - bfin_write_MDMA_D0_START_ADDR(dst); + bfin_write(&mdma_d0->start_addr, ldst); /* Setup destination xcount */ - bfin_write_MDMA_D0_X_COUNT(count); + bfin_write(&mdma_d0->x_count, count); /* Setup destination xmodify */ - bfin_write_MDMA_D0_X_MODIFY(mod); + bfin_write(&mdma_d0->x_modify, mod); /* Setup Source start address */ - bfin_write_MDMA_S0_START_ADDR(src); + bfin_write(&mdma_s0->start_addr, lsrc); /* Setup Source xcount */ - bfin_write_MDMA_S0_X_COUNT(count); + bfin_write(&mdma_s0->x_count, count); /* Setup Source xmodify */ - bfin_write_MDMA_S0_X_MODIFY(mod); + bfin_write(&mdma_s0->x_modify, mod); /* Enable source DMA */ - bfin_write_MDMA_S0_CONFIG(wdsize | DMAEN); - bfin_write_MDMA_D0_CONFIG(wdsize | DMAEN | WNR | DI_EN); + bfin_write(&mdma_s0->config, dsize | DMAEN); + bfin_write(&mdma_d0->config, dsize | DMAEN | WNR | DI_EN); SSYNC(); - while (!(bfin_read_MDMA_D0_IRQ_STATUS() & DMA_DONE)) + while (!(bfin_read(&mdma_d0->status) & DMA_DONE)) continue; - bfin_write_MDMA_D0_IRQ_STATUS(DMA_RUN | DMA_DONE | DMA_ERR); - bfin_write_MDMA_D0_CONFIG(0); - bfin_write_MDMA_S0_CONFIG(0); + bfin_write(&mdma_d0->status, DMA_RUN | DMA_DONE | DMA_ERR); + bfin_write(&mdma_d0->config, 0); + bfin_write(&mdma_s0->config, 0); } /* We should do a dcache invalidate on the destination after the dma, but since * we lack such hardware capability, we'll flush/invalidate the destination