From: rev13@wp.pl Date: Sun, 1 Mar 2015 11:44:40 +0000 (+0100) Subject: ARMv7M: Add STM32F4 support X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=eaaa4f7e0e99b7bb1f5caefd96ade7c2ee891bf3;p=u-boot.git ARMv7M: Add STM32F4 support Signed-off-by: Kamil Lulko Reviewed-by: Tom Rini --- diff --git a/arch/arm/cpu/armv7m/Makefile b/arch/arm/cpu/armv7m/Makefile index aff60e8102..b662e03428 100644 --- a/arch/arm/cpu/armv7m/Makefile +++ b/arch/arm/cpu/armv7m/Makefile @@ -7,3 +7,5 @@ extra-y := start.o obj-y += cpu.o + +obj-$(CONFIG_STM32F4) += stm32f4/ diff --git a/arch/arm/cpu/armv7m/stm32f4/Makefile b/arch/arm/cpu/armv7m/stm32f4/Makefile new file mode 100644 index 0000000000..e98283031c --- /dev/null +++ b/arch/arm/cpu/armv7m/stm32f4/Makefile @@ -0,0 +1,11 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# (C) Copyright 2015 +# Kamil Lulko, +# +# SPDX-License-Identifier: GPL-2.0+ +# + +obj-y += soc.o clock.o timer.o flash.o diff --git a/arch/arm/cpu/armv7m/stm32f4/clock.c b/arch/arm/cpu/armv7m/stm32f4/clock.c new file mode 100644 index 0000000000..2eded1f52e --- /dev/null +++ b/arch/arm/cpu/armv7m/stm32f4/clock.c @@ -0,0 +1,209 @@ +/* + * (C) Copyright 2015 + * Kamil Lulko, + * + * (C) Copyright 2014 + * STMicroelectronics + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#define RCC_CR_HSION (1 << 0) +#define RCC_CR_HSEON (1 << 16) +#define RCC_CR_HSERDY (1 << 17) +#define RCC_CR_HSEBYP (1 << 18) +#define RCC_CR_CSSON (1 << 19) +#define RCC_CR_PLLON (1 << 24) +#define RCC_CR_PLLRDY (1 << 25) + +#define RCC_PLLCFGR_PLLM_MASK 0x3F +#define RCC_PLLCFGR_PLLN_MASK 0x7FC0 +#define RCC_PLLCFGR_PLLP_MASK 0x30000 +#define RCC_PLLCFGR_PLLQ_MASK 0xF000000 +#define RCC_PLLCFGR_PLLSRC (1 << 22) +#define RCC_PLLCFGR_PLLN_SHIFT 6 +#define RCC_PLLCFGR_PLLP_SHIFT 16 +#define RCC_PLLCFGR_PLLQ_SHIFT 24 + +#define RCC_CFGR_AHB_PSC_MASK 0xF0 +#define RCC_CFGR_APB1_PSC_MASK 0x1C00 +#define RCC_CFGR_APB2_PSC_MASK 0xE000 +#define RCC_CFGR_SW0 (1 << 0) +#define RCC_CFGR_SW1 (1 << 1) +#define RCC_CFGR_SW_MASK 0x3 +#define RCC_CFGR_SW_HSI 0 +#define RCC_CFGR_SW_HSE RCC_CFGR_SW0 +#define RCC_CFGR_SW_PLL RCC_CFGR_SW1 +#define RCC_CFGR_SWS0 (1 << 2) +#define RCC_CFGR_SWS1 (1 << 3) +#define RCC_CFGR_SWS_MASK 0xC +#define RCC_CFGR_SWS_HSI 0 +#define RCC_CFGR_SWS_HSE RCC_CFGR_SWS0 +#define RCC_CFGR_SWS_PLL RCC_CFGR_SWS1 +#define RCC_CFGR_HPRE_SHIFT 4 +#define RCC_CFGR_PPRE1_SHIFT 10 +#define RCC_CFGR_PPRE2_SHIFT 13 + +#define RCC_APB1ENR_PWREN (1 << 28) + +#define PWR_CR_VOS0 (1 << 14) +#define PWR_CR_VOS1 (1 << 15) +#define PWR_CR_VOS_MASK 0xC000 +#define PWR_CR_VOS_SCALE_MODE_1 (PWR_CR_VOS0 | PWR_CR_VOS1) +#define PWR_CR_VOS_SCALE_MODE_2 (PWR_CR_VOS1) +#define PWR_CR_VOS_SCALE_MODE_3 (PWR_CR_VOS0) + +#define FLASH_ACR_WS(n) n +#define FLASH_ACR_PRFTEN (1 << 8) +#define FLASH_ACR_ICEN (1 << 9) +#define FLASH_ACR_DCEN (1 << 10) + +struct pll_psc { + u8 pll_m; + u16 pll_n; + u8 pll_p; + u8 pll_q; + u8 ahb_psc; + u8 apb1_psc; + u8 apb2_psc; +}; + +#define AHB_PSC_1 0 +#define AHB_PSC_2 0x8 +#define AHB_PSC_4 0x9 +#define AHB_PSC_8 0xA +#define AHB_PSC_16 0xB +#define AHB_PSC_64 0xC +#define AHB_PSC_128 0xD +#define AHB_PSC_256 0xE +#define AHB_PSC_512 0xF + +#define APB_PSC_1 0 +#define APB_PSC_2 0x4 +#define APB_PSC_4 0x5 +#define APB_PSC_8 0x6 +#define APB_PSC_16 0x7 + +#if !defined(CONFIG_STM32_HSE_HZ) +#error "CONFIG_STM32_HSE_HZ not defined!" +#else +#if (CONFIG_STM32_HSE_HZ == 8000000) +struct pll_psc pll_psc_168 = { + .pll_m = 8, + .pll_n = 336, + .pll_p = 2, + .pll_q = 7, + .ahb_psc = AHB_PSC_1, + .apb1_psc = APB_PSC_4, + .apb2_psc = APB_PSC_2 +}; +#else +#error "No PLL/Prescaler configuration for given CONFIG_STM32_HSE_HZ exists" +#endif +#endif + +int configure_clocks(void) +{ + /* Reset RCC configuration */ + setbits_le32(&STM32_RCC->cr, RCC_CR_HSION); + writel(0, &STM32_RCC->cfgr); /* Reset CFGR */ + clrbits_le32(&STM32_RCC->cr, (RCC_CR_HSEON | RCC_CR_CSSON + | RCC_CR_PLLON)); + writel(0x24003010, &STM32_RCC->pllcfgr); /* Reset value from RM */ + clrbits_le32(&STM32_RCC->cr, RCC_CR_HSEBYP); + writel(0, &STM32_RCC->cir); /* Disable all interrupts */ + + /* Configure for HSE+PLL operation */ + setbits_le32(&STM32_RCC->cr, RCC_CR_HSEON); + while (!(readl(&STM32_RCC->cr) & RCC_CR_HSERDY)) + ; + + /* Enable high performance mode, System frequency up to 168 MHz */ + setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_PWREN); + writel(PWR_CR_VOS_SCALE_MODE_1, &STM32_PWR->cr); + + setbits_le32(&STM32_RCC->cfgr, (( + pll_psc_168.ahb_psc << RCC_CFGR_HPRE_SHIFT) + | (pll_psc_168.apb1_psc << RCC_CFGR_PPRE1_SHIFT) + | (pll_psc_168.apb2_psc << RCC_CFGR_PPRE2_SHIFT))); + + writel(pll_psc_168.pll_m + | (pll_psc_168.pll_n << RCC_PLLCFGR_PLLN_SHIFT) + | (((pll_psc_168.pll_p >> 1) - 1) << RCC_PLLCFGR_PLLP_SHIFT) + | (pll_psc_168.pll_q << RCC_PLLCFGR_PLLQ_SHIFT), + &STM32_RCC->pllcfgr); + setbits_le32(&STM32_RCC->pllcfgr, RCC_PLLCFGR_PLLSRC); + + setbits_le32(&STM32_RCC->cr, RCC_CR_PLLON); + + while (!(readl(&STM32_RCC->cr) & RCC_CR_PLLRDY)) + ; + + /* 5 wait states, Prefetch enabled, D-Cache enabled, I-Cache enabled */ + writel(FLASH_ACR_WS(5) | FLASH_ACR_PRFTEN | FLASH_ACR_ICEN + | FLASH_ACR_DCEN, &STM32_FLASH->acr); + + clrbits_le32(&STM32_RCC->cfgr, (RCC_CFGR_SW0 | RCC_CFGR_SW1)); + setbits_le32(&STM32_RCC->cfgr, RCC_CFGR_SW_PLL); + + while ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) != + RCC_CFGR_SWS_PLL) + ; + + return 0; +} + +unsigned long clock_get(enum clock clck) +{ + u32 sysclk = 0; + u32 shift = 0; + /* Prescaler table lookups for clock computation */ + u8 ahb_psc_table[16] = { + 0, 0, 0, 0, 0, 0, 0, 0, 1, 2, 3, 4, 6, 7, 8, 9 + }; + u8 apb_psc_table[8] = { + 0, 0, 0, 0, 1, 2, 3, 4 + }; + + if ((readl(&STM32_RCC->cfgr) & RCC_CFGR_SWS_MASK) == + RCC_CFGR_SWS_PLL) { + u16 pllm, plln, pllp; + pllm = (readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLM_MASK); + plln = ((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLN_MASK) + >> RCC_PLLCFGR_PLLN_SHIFT); + pllp = ((((readl(&STM32_RCC->pllcfgr) & RCC_PLLCFGR_PLLP_MASK) + >> RCC_PLLCFGR_PLLP_SHIFT) + 1) << 1); + sysclk = ((CONFIG_STM32_HSE_HZ / pllm) * plln) / pllp; + } + + switch (clck) { + case CLOCK_CORE: + return sysclk; + break; + case CLOCK_AHB: + shift = ahb_psc_table[( + (readl(&STM32_RCC->cfgr) & RCC_CFGR_AHB_PSC_MASK) + >> RCC_CFGR_HPRE_SHIFT)]; + return sysclk >>= shift; + break; + case CLOCK_APB1: + shift = apb_psc_table[( + (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB1_PSC_MASK) + >> RCC_CFGR_PPRE1_SHIFT)]; + return sysclk >>= shift; + break; + case CLOCK_APB2: + shift = apb_psc_table[( + (readl(&STM32_RCC->cfgr) & RCC_CFGR_APB2_PSC_MASK) + >> RCC_CFGR_PPRE2_SHIFT)]; + return sysclk >>= shift; + break; + default: + return 0; + break; + } +} diff --git a/arch/arm/cpu/armv7m/stm32f4/flash.c b/arch/arm/cpu/armv7m/stm32f4/flash.c new file mode 100644 index 0000000000..e5c6111330 --- /dev/null +++ b/arch/arm/cpu/armv7m/stm32f4/flash.c @@ -0,0 +1,143 @@ +/* + * (C) Copyright 2015 + * Kamil Lulko, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +#define STM32_FLASH_KEY1 0x45670123 +#define STM32_FLASH_KEY2 0xCDEF89AB + +flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; + +const u32 sect_sz_kb[CONFIG_SYS_MAX_FLASH_SECT] = { + [0 ... 3] = 16 * 1024, + [4] = 64 * 1024, + [5 ... 11] = 128 * 1024 +}; + +static void stm32f4_flash_lock(u8 lock) +{ + if (lock) { + setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_LOCK); + } else { + writel(STM32_FLASH_KEY1, &STM32_FLASH->key); + writel(STM32_FLASH_KEY2, &STM32_FLASH->key); + } +} + +unsigned long flash_init(void) +{ + unsigned long total_size = 0; + u8 i, j; + + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { + flash_info[i].flash_id = FLASH_STM32F4; + flash_info[i].sector_count = CONFIG_SYS_MAX_FLASH_SECT; + flash_info[i].start[0] = CONFIG_SYS_FLASH_BASE + (i << 20); + flash_info[i].size = sect_sz_kb[0]; + for (j = 1; j < CONFIG_SYS_MAX_FLASH_SECT; j++) { + flash_info[i].start[j] = flash_info[i].start[j - 1] + + (sect_sz_kb[j - 1]); + flash_info[i].size += sect_sz_kb[j]; + } + total_size += flash_info[i].size; + } + + return total_size; +} + +void flash_print_info(flash_info_t *info) +{ + int i; + + if (info->flash_id == FLASH_UNKNOWN) { + printf("missing or unknown FLASH type\n"); + return; + } else if (info->flash_id == FLASH_STM32F4) { + printf("STM32F4 Embedded Flash\n"); + } + + printf(" Size: %ld MB in %d Sectors\n", + info->size >> 20, info->sector_count); + + printf(" Sector Start Addresses:"); + for (i = 0; i < info->sector_count; ++i) { + if ((i % 5) == 0) + printf("\n "); + printf(" %08lX%s", + info->start[i], + info->protect[i] ? " (RO)" : " "); + } + printf("\n"); + return; +} + +int flash_erase(flash_info_t *info, int first, int last) +{ + u8 bank = 0xFF; + int i; + + for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) { + if (info == &flash_info[i]) { + bank = i; + break; + } + } + if (bank == 0xFF) + return -1; + + stm32f4_flash_lock(0); + + for (i = first; i <= last; i++) { + while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) + ; + + if (bank == 0) { + setbits_le32(&STM32_FLASH->cr, + (i << STM32_FLASH_CR_SNB_OFFSET)); + } else if (bank == 1) { + setbits_le32(&STM32_FLASH->cr, + ((0x10 | i) << STM32_FLASH_CR_SNB_OFFSET)); + } else { + stm32f4_flash_lock(1); + return -1; + } + setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SER); + setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_STRT); + + while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) + ; + + clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_SER); + stm32f4_flash_lock(1); + } + + return 0; +} + +int write_buff(flash_info_t *info, uchar *src, ulong addr, ulong cnt) +{ + ulong i; + + while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) + ; + + stm32f4_flash_lock(0); + + setbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_PG); + /* To make things simple use byte writes only */ + for (i = 0; i < cnt; i++) { + *(uchar *)(addr + i) = src[i]; + while (readl(&STM32_FLASH->sr) & STM32_FLASH_SR_BSY) + ; + } + clrbits_le32(&STM32_FLASH->cr, STM32_FLASH_CR_PG); + stm32f4_flash_lock(1); + + return 0; +} diff --git a/arch/arm/cpu/armv7m/stm32f4/soc.c b/arch/arm/cpu/armv7m/stm32f4/soc.c new file mode 100644 index 0000000000..202a1269fb --- /dev/null +++ b/arch/arm/cpu/armv7m/stm32f4/soc.c @@ -0,0 +1,37 @@ +/* + * (C) Copyright 2015 + * Kamil Lulko, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +u32 get_cpu_rev(void) +{ + return 0; +} + +int arch_cpu_init(void) +{ + configure_clocks(); + + /* + * Configure the memory protection unit (MPU) to allow full access to + * the whole 4GB address space. + */ + writel(0, &V7M_MPU->rnr); + writel(0, &V7M_MPU->rbar); + writel((V7M_MPU_RASR_AP_RW_RW | V7M_MPU_RASR_SIZE_4GB + | V7M_MPU_RASR_EN), &V7M_MPU->rasr); + writel(V7M_MPU_CTRL_ENABLE | V7M_MPU_CTRL_HFNMIENA, &V7M_MPU->ctrl); + + return 0; +} + +void s_init(void) +{ +} diff --git a/arch/arm/cpu/armv7m/stm32f4/timer.c b/arch/arm/cpu/armv7m/stm32f4/timer.c new file mode 100644 index 0000000000..102ae6d960 --- /dev/null +++ b/arch/arm/cpu/armv7m/stm32f4/timer.c @@ -0,0 +1,118 @@ +/* + * (C) Copyright 2015 + * Kamil Lulko, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define STM32_TIM2_BASE (STM32_APB1PERIPH_BASE + 0x0000) + +#define RCC_APB1ENR_TIM2EN (1 << 0) + +struct stm32_tim2_5 { + u32 cr1; + u32 cr2; + u32 smcr; + u32 dier; + u32 sr; + u32 egr; + u32 ccmr1; + u32 ccmr2; + u32 ccer; + u32 cnt; + u32 psc; + u32 arr; + u32 reserved1; + u32 ccr1; + u32 ccr2; + u32 ccr3; + u32 ccr4; + u32 reserved2; + u32 dcr; + u32 dmar; + u32 or; +}; + +#define TIM_CR1_CEN (1 << 0) + +#define TIM_EGR_UG (1 << 0) + +int timer_init(void) +{ + struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE; + + setbits_le32(&STM32_RCC->apb1enr, RCC_APB1ENR_TIM2EN); + + if (clock_get(CLOCK_AHB) == clock_get(CLOCK_APB1)) + writel((clock_get(CLOCK_APB1) / CONFIG_SYS_HZ_CLOCK) - 1, + &tim->psc); + else + writel(((clock_get(CLOCK_APB1) * 2) / CONFIG_SYS_HZ_CLOCK) - 1, + &tim->psc); + + writel(0xFFFFFFFF, &tim->arr); + writel(TIM_CR1_CEN, &tim->cr1); + setbits_le32(&tim->egr, TIM_EGR_UG); + + gd->arch.tbl = 0; + gd->arch.tbu = 0; + gd->arch.lastinc = 0; + + return 0; +} + +ulong get_timer(ulong base) +{ + return (get_ticks() / (CONFIG_SYS_HZ_CLOCK / CONFIG_SYS_HZ)) - base; +} + +unsigned long long get_ticks(void) +{ + struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE; + u32 now; + + now = readl(&tim->cnt); + + if (now >= gd->arch.lastinc) + gd->arch.tbl += (now - gd->arch.lastinc); + else + gd->arch.tbl += (0xFFFFFFFF - gd->arch.lastinc) + now; + + gd->arch.lastinc = now; + + return gd->arch.tbl; +} + +void reset_timer(void) +{ + struct stm32_tim2_5 *tim = (struct stm32_tim2_5 *)STM32_TIM2_BASE; + + gd->arch.lastinc = readl(&tim->cnt); + gd->arch.tbl = 0; +} + +/* delay x useconds */ +void __udelay(ulong usec) +{ + unsigned long long start; + + start = get_ticks(); /* get current timestamp */ + while ((get_ticks() - start) < usec) + ; /* loop till time has passed */ +} + +/* + * This function is derived from PowerPC code (timebase clock frequency). + * On ARM it returns the number of timer ticks per second. + */ +ulong get_tbclk(void) +{ + return CONFIG_SYS_HZ_CLOCK; +} diff --git a/arch/arm/include/asm/arch-stm32f4/fmc.h b/arch/arm/include/asm/arch-stm32f4/fmc.h new file mode 100644 index 0000000000..4ab30314c9 --- /dev/null +++ b/arch/arm/include/asm/arch-stm32f4/fmc.h @@ -0,0 +1,75 @@ +/* + * (C) Copyright 2013 + * Pavel Boldin, Emcraft Systems, paboldin@emcraft.com + * + * (C) Copyright 2015 + * Kamil Lulko, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MACH_FMC_H_ +#define _MACH_FMC_H_ + +struct stm32_fmc_regs { + u32 sdcr1; /* Control register 1 */ + u32 sdcr2; /* Control register 2 */ + u32 sdtr1; /* Timing register 1 */ + u32 sdtr2; /* Timing register 2 */ + u32 sdcmr; /* Mode register */ + u32 sdrtr; /* Refresh timing register */ + u32 sdsr; /* Status register */ +}; + +/* + * FMC registers base + */ +#define STM32_SDRAM_FMC_BASE 0xA0000140 +#define STM32_SDRAM_FMC ((struct stm32_fmc_regs *)STM32_SDRAM_FMC_BASE) + +/* Control register SDCR */ +#define FMC_SDCR_RPIPE_SHIFT 13 /* RPIPE bit shift */ +#define FMC_SDCR_RBURST_SHIFT 12 /* RBURST bit shift */ +#define FMC_SDCR_SDCLK_SHIFT 10 /* SDRAM clock divisor shift */ +#define FMC_SDCR_WP_SHIFT 9 /* Write protection shift */ +#define FMC_SDCR_CAS_SHIFT 7 /* CAS latency shift */ +#define FMC_SDCR_NB_SHIFT 6 /* Number of banks shift */ +#define FMC_SDCR_MWID_SHIFT 4 /* Memory width shift */ +#define FMC_SDCR_NR_SHIFT 2 /* Number of row address bits shift */ +#define FMC_SDCR_NC_SHIFT 0 /* Number of col address bits shift */ + +/* Timings register SDTR */ +#define FMC_SDTR_TMRD_SHIFT 0 /* Load mode register to active */ +#define FMC_SDTR_TXSR_SHIFT 4 /* Exit self-refresh time */ +#define FMC_SDTR_TRAS_SHIFT 8 /* Self-refresh time */ +#define FMC_SDTR_TRC_SHIFT 12 /* Row cycle delay */ +#define FMC_SDTR_TWR_SHIFT 16 /* Recovery delay */ +#define FMC_SDTR_TRP_SHIFT 20 /* Row precharge delay */ +#define FMC_SDTR_TRCD_SHIFT 24 /* Row-to-column delay */ + + +#define FMC_SDCMR_NRFS_SHIFT 5 + +#define FMC_SDCMR_MODE_NORMAL 0 +#define FMC_SDCMR_MODE_START_CLOCK 1 +#define FMC_SDCMR_MODE_PRECHARGE 2 +#define FMC_SDCMR_MODE_AUTOREFRESH 3 +#define FMC_SDCMR_MODE_WRITE_MODE 4 +#define FMC_SDCMR_MODE_SELFREFRESH 5 +#define FMC_SDCMR_MODE_POWERDOWN 6 + +#define FMC_SDCMR_BANK_1 (1 << 4) +#define FMC_SDCMR_BANK_2 (1 << 3) + +#define FMC_SDCMR_MODE_REGISTER_SHIFT 9 + +#define FMC_SDSR_BUSY (1 << 5) + +#define FMC_BUSY_WAIT() do { \ + __asm__ __volatile__ ("dsb" : : : "memory"); \ + while (STM32_SDRAM_FMC->sdsr & FMC_SDSR_BUSY) \ + ; \ + } while (0) + + +#endif /* _MACH_FMC_H_ */ diff --git a/arch/arm/include/asm/arch-stm32f4/gpio.h b/arch/arm/include/asm/arch-stm32f4/gpio.h new file mode 100644 index 0000000000..7cd866ea2a --- /dev/null +++ b/arch/arm/include/asm/arch-stm32f4/gpio.h @@ -0,0 +1,116 @@ +/* + * (C) Copyright 2011 + * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com + * + * (C) Copyright 2015 + * Kamil Lulko, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _STM32_GPIO_H_ +#define _STM32_GPIO_H_ + +enum stm32_gpio_port { + STM32_GPIO_PORT_A = 0, + STM32_GPIO_PORT_B, + STM32_GPIO_PORT_C, + STM32_GPIO_PORT_D, + STM32_GPIO_PORT_E, + STM32_GPIO_PORT_F, + STM32_GPIO_PORT_G, + STM32_GPIO_PORT_H, + STM32_GPIO_PORT_I +}; + +enum stm32_gpio_pin { + STM32_GPIO_PIN_0 = 0, + STM32_GPIO_PIN_1, + STM32_GPIO_PIN_2, + STM32_GPIO_PIN_3, + STM32_GPIO_PIN_4, + STM32_GPIO_PIN_5, + STM32_GPIO_PIN_6, + STM32_GPIO_PIN_7, + STM32_GPIO_PIN_8, + STM32_GPIO_PIN_9, + STM32_GPIO_PIN_10, + STM32_GPIO_PIN_11, + STM32_GPIO_PIN_12, + STM32_GPIO_PIN_13, + STM32_GPIO_PIN_14, + STM32_GPIO_PIN_15 +}; + +enum stm32_gpio_mode { + STM32_GPIO_MODE_IN = 0, + STM32_GPIO_MODE_OUT, + STM32_GPIO_MODE_AF, + STM32_GPIO_MODE_AN +}; + +enum stm32_gpio_otype { + STM32_GPIO_OTYPE_PP = 0, + STM32_GPIO_OTYPE_OD +}; + +enum stm32_gpio_speed { + STM32_GPIO_SPEED_2M = 0, + STM32_GPIO_SPEED_25M, + STM32_GPIO_SPEED_50M, + STM32_GPIO_SPEED_100M +}; + +enum stm32_gpio_pupd { + STM32_GPIO_PUPD_NO = 0, + STM32_GPIO_PUPD_UP, + STM32_GPIO_PUPD_DOWN +}; + +enum stm32_gpio_af { + STM32_GPIO_AF0 = 0, + STM32_GPIO_AF1, + STM32_GPIO_AF2, + STM32_GPIO_AF3, + STM32_GPIO_AF4, + STM32_GPIO_AF5, + STM32_GPIO_AF6, + STM32_GPIO_AF7, + STM32_GPIO_AF8, + STM32_GPIO_AF9, + STM32_GPIO_AF10, + STM32_GPIO_AF11, + STM32_GPIO_AF12, + STM32_GPIO_AF13, + STM32_GPIO_AF14, + STM32_GPIO_AF15 +}; + +struct stm32_gpio_dsc { + enum stm32_gpio_port port; + enum stm32_gpio_pin pin; +}; + +struct stm32_gpio_ctl { + enum stm32_gpio_mode mode; + enum stm32_gpio_otype otype; + enum stm32_gpio_speed speed; + enum stm32_gpio_pupd pupd; + enum stm32_gpio_af af; +}; + +static inline unsigned stm32_gpio_to_port(unsigned gpio) +{ + return gpio / 16; +} + +static inline unsigned stm32_gpio_to_pin(unsigned gpio) +{ + return gpio % 16; +} + +int stm32_gpio_config(const struct stm32_gpio_dsc *gpio_dsc, + const struct stm32_gpio_ctl *gpio_ctl); +int stm32_gpout_set(const struct stm32_gpio_dsc *gpio_dsc, int state); + +#endif /* _STM32_GPIO_H_ */ diff --git a/arch/arm/include/asm/arch-stm32f4/stm32.h b/arch/arm/include/asm/arch-stm32f4/stm32.h new file mode 100644 index 0000000000..a9f88db560 --- /dev/null +++ b/arch/arm/include/asm/arch-stm32f4/stm32.h @@ -0,0 +1,108 @@ +/* + * (C) Copyright 2011 + * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com + * + * (C) Copyright 2015 + * Kamil Lulko, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef _MACH_STM32_H_ +#define _MACH_STM32_H_ + +/* + * Peripheral memory map + */ +#define STM32_PERIPH_BASE 0x40000000 +#define STM32_APB1PERIPH_BASE (STM32_PERIPH_BASE + 0x00000000) +#define STM32_APB2PERIPH_BASE (STM32_PERIPH_BASE + 0x00010000) +#define STM32_AHB1PERIPH_BASE (STM32_PERIPH_BASE + 0x00020000) +#define STM32_AHB2PERIPH_BASE (STM32_PERIPH_BASE + 0x10000000) + +#define STM32_BUS_MASK 0xFFFF0000 + +/* + * Register maps + */ +struct stm32_rcc_regs { + u32 cr; /* RCC clock control */ + u32 pllcfgr; /* RCC PLL configuration */ + u32 cfgr; /* RCC clock configuration */ + u32 cir; /* RCC clock interrupt */ + u32 ahb1rstr; /* RCC AHB1 peripheral reset */ + u32 ahb2rstr; /* RCC AHB2 peripheral reset */ + u32 ahb3rstr; /* RCC AHB3 peripheral reset */ + u32 rsv0; + u32 apb1rstr; /* RCC APB1 peripheral reset */ + u32 apb2rstr; /* RCC APB2 peripheral reset */ + u32 rsv1[2]; + u32 ahb1enr; /* RCC AHB1 peripheral clock enable */ + u32 ahb2enr; /* RCC AHB2 peripheral clock enable */ + u32 ahb3enr; /* RCC AHB3 peripheral clock enable */ + u32 rsv2; + u32 apb1enr; /* RCC APB1 peripheral clock enable */ + u32 apb2enr; /* RCC APB2 peripheral clock enable */ + u32 rsv3[2]; + u32 ahb1lpenr; /* RCC AHB1 periph clk enable in low pwr mode */ + u32 ahb2lpenr; /* RCC AHB2 periph clk enable in low pwr mode */ + u32 ahb3lpenr; /* RCC AHB3 periph clk enable in low pwr mode */ + u32 rsv4; + u32 apb1lpenr; /* RCC APB1 periph clk enable in low pwr mode */ + u32 apb2lpenr; /* RCC APB2 periph clk enable in low pwr mode */ + u32 rsv5[2]; + u32 bdcr; /* RCC Backup domain control */ + u32 csr; /* RCC clock control & status */ + u32 rsv6[2]; + u32 sscgr; /* RCC spread spectrum clock generation */ + u32 plli2scfgr; /* RCC PLLI2S configuration */ + u32 pllsaicfgr; + u32 dckcfgr; +}; + +struct stm32_pwr_regs { + u32 cr; + u32 csr; +}; + +struct stm32_flash_regs { + u32 acr; + u32 key; + u32 optkeyr; + u32 sr; + u32 cr; + u32 optcr; + u32 optcr1; +}; + +/* + * Registers access macros + */ +#define STM32_RCC_BASE (STM32_AHB1PERIPH_BASE + 0x3800) +#define STM32_RCC ((struct stm32_rcc_regs *)STM32_RCC_BASE) + +#define STM32_PWR_BASE (STM32_APB1PERIPH_BASE + 0x7000) +#define STM32_PWR ((struct stm32_pwr_regs *)STM32_PWR_BASE) + +#define STM32_FLASH_BASE (STM32_AHB1PERIPH_BASE + 0x3C00) +#define STM32_FLASH ((struct stm32_flash_regs *)STM32_FLASH_BASE) + +#define STM32_FLASH_SR_BSY (1 << 16) + +#define STM32_FLASH_CR_PG (1 << 0) +#define STM32_FLASH_CR_SER (1 << 1) +#define STM32_FLASH_CR_STRT (1 << 16) +#define STM32_FLASH_CR_LOCK (1 << 31) +#define STM32_FLASH_CR_SNB_OFFSET 3 + +enum clock { + CLOCK_CORE, + CLOCK_AHB, + CLOCK_APB1, + CLOCK_APB2 +}; + +int configure_clocks(void); +unsigned long clock_get(enum clock clck); + +#endif /* _MACH_STM32_H_ */ diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 85f71c5d4a..8ca8b05ebf 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -42,3 +42,4 @@ obj-$(CONFIG_TCA642X) += tca642x.o oby-$(CONFIG_SX151X) += sx151x.o obj-$(CONFIG_SUNXI_GPIO) += sunxi_gpio.o obj-$(CONFIG_LPC32XX_GPIO) += lpc32xx_gpio.o +obj-$(CONFIG_STM32_GPIO) += stm32_gpio.o diff --git a/drivers/gpio/stm32_gpio.c b/drivers/gpio/stm32_gpio.c new file mode 100644 index 0000000000..d3497e9675 --- /dev/null +++ b/drivers/gpio/stm32_gpio.c @@ -0,0 +1,199 @@ +/* + * (C) Copyright 2011 + * Yuri Tikhonov, Emcraft Systems, yur@emcraft.com + * + * (C) Copyright 2015 + * Kamil Lulko, + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#define STM32_GPIOA_BASE (STM32_AHB1PERIPH_BASE + 0x0000) +#define STM32_GPIOB_BASE (STM32_AHB1PERIPH_BASE + 0x0400) +#define STM32_GPIOC_BASE (STM32_AHB1PERIPH_BASE + 0x0800) +#define STM32_GPIOD_BASE (STM32_AHB1PERIPH_BASE + 0x0C00) +#define STM32_GPIOE_BASE (STM32_AHB1PERIPH_BASE + 0x1000) +#define STM32_GPIOF_BASE (STM32_AHB1PERIPH_BASE + 0x1400) +#define STM32_GPIOG_BASE (STM32_AHB1PERIPH_BASE + 0x1800) +#define STM32_GPIOH_BASE (STM32_AHB1PERIPH_BASE + 0x1C00) +#define STM32_GPIOI_BASE (STM32_AHB1PERIPH_BASE + 0x2000) + +static const unsigned long io_base[] = { + STM32_GPIOA_BASE, STM32_GPIOB_BASE, STM32_GPIOC_BASE, + STM32_GPIOD_BASE, STM32_GPIOE_BASE, STM32_GPIOF_BASE, + STM32_GPIOG_BASE, STM32_GPIOH_BASE, STM32_GPIOI_BASE +}; + +struct stm32_gpio_regs { + u32 moder; /* GPIO port mode */ + u32 otyper; /* GPIO port output type */ + u32 ospeedr; /* GPIO port output speed */ + u32 pupdr; /* GPIO port pull-up/pull-down */ + u32 idr; /* GPIO port input data */ + u32 odr; /* GPIO port output data */ + u32 bsrr; /* GPIO port bit set/reset */ + u32 lckr; /* GPIO port configuration lock */ + u32 afr[2]; /* GPIO alternate function */ +}; + +#define CHECK_DSC(x) (!x || x->port > 8 || x->pin > 15) +#define CHECK_CTL(x) (!x || x->af > 15 || x->mode > 3 || x->otype > 1 || \ + x->pupd > 2 || x->speed > 3) + +int stm32_gpio_config(const struct stm32_gpio_dsc *dsc, + const struct stm32_gpio_ctl *ctl) +{ + struct stm32_gpio_regs *gpio_regs; + u32 i; + int rv; + + if (CHECK_DSC(dsc)) { + rv = -EINVAL; + goto out; + } + if (CHECK_CTL(ctl)) { + rv = -EINVAL; + goto out; + } + + gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; + + setbits_le32(&STM32_RCC->ahb1enr, 1 << dsc->port); + + i = (dsc->pin & 0x07) * 4; + clrbits_le32(&gpio_regs->afr[dsc->pin >> 3], (0xF << i)); + setbits_le32(&gpio_regs->afr[dsc->pin >> 3], ctl->af << i); + + i = dsc->pin * 2; + + clrbits_le32(&gpio_regs->moder, (0x3 << i)); + setbits_le32(&gpio_regs->moder, ctl->mode << i); + + clrbits_le32(&gpio_regs->otyper, (0x3 << i)); + setbits_le32(&gpio_regs->otyper, ctl->otype << i); + + clrbits_le32(&gpio_regs->ospeedr, (0x3 << i)); + setbits_le32(&gpio_regs->ospeedr, ctl->speed << i); + + clrbits_le32(&gpio_regs->pupdr, (0x3 << i)); + setbits_le32(&gpio_regs->pupdr, ctl->pupd << i); + + rv = 0; +out: + return rv; +} + +int stm32_gpout_set(const struct stm32_gpio_dsc *dsc, int state) +{ + struct stm32_gpio_regs *gpio_regs; + int rv; + + if (CHECK_DSC(dsc)) { + rv = -EINVAL; + goto out; + } + + gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; + + if (state) + writel(1 << dsc->pin, &gpio_regs->bsrr); + else + writel(1 << (dsc->pin + 16), &gpio_regs->bsrr); + + rv = 0; +out: + return rv; +} + +int stm32_gpin_get(const struct stm32_gpio_dsc *dsc) +{ + struct stm32_gpio_regs *gpio_regs; + int rv; + + if (CHECK_DSC(dsc)) { + rv = -EINVAL; + goto out; + } + + gpio_regs = (struct stm32_gpio_regs *)io_base[dsc->port]; + rv = readl(&gpio_regs->idr) & (1 << dsc->pin); +out: + return rv; +} + +/* Common GPIO API */ + +int gpio_request(unsigned gpio, const char *label) +{ + return 0; +} + +int gpio_free(unsigned gpio) +{ + return 0; +} + +int gpio_direction_input(unsigned gpio) +{ + struct stm32_gpio_dsc dsc; + struct stm32_gpio_ctl ctl; + + dsc.port = stm32_gpio_to_port(gpio); + dsc.pin = stm32_gpio_to_pin(gpio); + ctl.af = STM32_GPIO_AF0; + ctl.mode = STM32_GPIO_MODE_IN; + ctl.pupd = STM32_GPIO_PUPD_NO; + ctl.speed = STM32_GPIO_SPEED_50M; + + return stm32_gpio_config(&dsc, &ctl); +} + +int gpio_direction_output(unsigned gpio, int value) +{ + struct stm32_gpio_dsc dsc; + struct stm32_gpio_ctl ctl; + int res; + + dsc.port = stm32_gpio_to_port(gpio); + dsc.pin = stm32_gpio_to_pin(gpio); + ctl.af = STM32_GPIO_AF0; + ctl.mode = STM32_GPIO_MODE_OUT; + ctl.otype = STM32_GPIO_OTYPE_PP; + ctl.pupd = STM32_GPIO_PUPD_NO; + ctl.speed = STM32_GPIO_SPEED_50M; + + res = stm32_gpio_config(&dsc, &ctl); + if (res < 0) + goto out; + res = stm32_gpout_set(&dsc, value); +out: + return res; +} + +int gpio_get_value(unsigned gpio) +{ + struct stm32_gpio_dsc dsc; + + dsc.port = stm32_gpio_to_port(gpio); + dsc.pin = stm32_gpio_to_pin(gpio); + + return stm32_gpin_get(&dsc); +} + +int gpio_set_value(unsigned gpio, int value) +{ + struct stm32_gpio_dsc dsc; + + dsc.port = stm32_gpio_to_port(gpio); + dsc.pin = stm32_gpio_to_pin(gpio); + + return stm32_gpout_set(&dsc, value); +} diff --git a/include/flash.h b/include/flash.h index 30aa080b88..48aa3a5f8e 100644 --- a/include/flash.h +++ b/include/flash.h @@ -459,6 +459,8 @@ extern flash_info_t *flash_get_info(ulong base); #define FLASH_S29GL064M 0x00F0 /* Spansion S29GL064M-R6 */ #define FLASH_S29GL128N 0x00F1 /* Spansion S29GL128N */ +#define FLASH_STM32F4 0x00F2 /* STM32F4 Embedded Flash */ + #define FLASH_UNKNOWN 0xFFFF /* unknown flash type */