From: Pali Rohár Date: Tue, 5 Apr 2022 13:12:30 +0000 (+0200) Subject: powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=e8c0e0064c8a7b0665fd1393c2e3266f80e884a8;p=u-boot.git powerpc: mpc85xx: Fix CONFIG_OF_SEPARATE support Currently CONFIG_OF_SEPARATE is completely broken and U-Boot for some mpc85xx board (e.g. P2020) has to be compiled with CONFIG_OF_EMBED. Otherwise it crashes during early init. When debug console is enabled and all debug logging options are turned on then U-Boot on P2020 with CONFIG_OF_SEPARATE prints following error: No valid device tree binary found at 110dc300 initcall sequence 110d3560 failed at call 1109535c (err=-1) ### ERROR ### Please RESET the board ### Problem is with appended DTB. When CONFIG_SYS_MPC85XX_NO_RESETVEC is set U-Boot binary image without DTB ends immediately after the .u_boot_list section. At this position is defined _end symbol at which U-Boot expects start of the appended DTB. Problem is that after .u_boot_list section are in linker script defined another sections with 256 byte long padding which are completely empty. During conversion of U-Boot ELF binary to RAW binary u-boot-nodtb.bin, objcopy removes trailing zero padding and therefore DTB is appended at wrong position. Changing alignment from 256 bytes to 4 bytes fixes this issue. And appended DTB is finally at he correct position. With this fix U-Boot on P2020 with CONFIG_OF_SEPARATE option starts working again. Signed-off-by: Pali Rohár Reviewed-by: Priyanka Jain --- diff --git a/arch/powerpc/cpu/mpc85xx/u-boot.lds b/arch/powerpc/cpu/mpc85xx/u-boot.lds index 17a0e631ca..48509dbdae 100644 --- a/arch/powerpc/cpu/mpc85xx/u-boot.lds +++ b/arch/powerpc/cpu/mpc85xx/u-boot.lds @@ -75,11 +75,11 @@ SECTIONS __ex_table : { *(__ex_table) } __stop___ex_table = .; - . = ALIGN(256); + . = ALIGN(4); __init_begin = .; .text.init : { *(.text.init) } .data.init : { *(.data.init) } - . = ALIGN(256); + . = ALIGN(4); __init_end = .; _end = .;