From: Stefan Roese Date: Thu, 10 Jan 2008 17:47:33 +0000 (+0100) Subject: NAND: Make NAND driver less verbose per default X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=e52b34d40a8a646e3d11638ea8797e96398dba13;p=u-boot.git NAND: Make NAND driver less verbose per default This patch turns off printing of bad blocks per default upon bootup. This can always be shown via the "nand bad" command later. Signed-off-by: Stefan Roese --- diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index f577ed6294..5661a8e4c7 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -2466,9 +2466,9 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, if (mtd->writesize > 512 && chip->cmdfunc == nand_command) chip->cmdfunc = nand_command_lp; - printk(KERN_INFO "NAND device: Manufacturer ID:" - " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, dev_id, - nand_manuf_ids[maf_idx].name, type->name); + MTDDEBUG (MTD_DEBUG_LEVEL0, "NAND device: Manufacturer ID:" + " 0x%02x, Chip ID: 0x%02x (%s %s)\n", *maf_id, dev_id, + nand_manuf_ids[maf_idx].name, type->name); return type; } diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index acf1cf5433..84479473b6 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -391,7 +391,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, loff_t from; size_t readlen; - printk(KERN_INFO "Scanning device for bad blocks\n"); + MTDDEBUG (MTD_DEBUG_LEVEL0, "Scanning device for bad blocks\n"); if (bd->options & NAND_BBT_SCANALLPAGES) len = 1 << (this->bbt_erase_shift - this->page_shift); @@ -444,8 +444,9 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, if (ret) { this->bbt[i >> 3] |= 0x03 << (i & 0x6); - printk(KERN_WARNING "Bad eraseblock %d at 0x%08x\n", - i >> 1, (unsigned int)from); + MTDDEBUG (MTD_DEBUG_LEVEL0, + "Bad eraseblock %d at 0x%08x\n", + i >> 1, (unsigned int)from); mtd->ecc_stats.badblocks++; }