From: Patrick Delaunay Date: Mon, 13 Jan 2020 10:35:00 +0000 (+0100) Subject: gpio: remove the open_drain API and ops X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=e3f3a121d8ebe15da868be8afbfb3e2a9ff80d4d;p=u-boot.git gpio: remove the open_drain API and ops This patch removes the ops get_open_drain/set_open_drain and the API dm_gpio_get_open_drain/dm_gpio_set_open_drain. The ops only provided in one driver (mpc8xxx gpio) and the associated API is never called in boards. This patch prepare a more generic set/get_dir_flags ops, including the open drain property. Reviewed-by: Simon Glass Signed-off-by: Patrick Delaunay --- diff --git a/arch/sandbox/include/asm/gpio.h b/arch/sandbox/include/asm/gpio.h index de8ac37f42..cfb803bb3b 100644 --- a/arch/sandbox/include/asm/gpio.h +++ b/arch/sandbox/include/asm/gpio.h @@ -42,26 +42,6 @@ int sandbox_gpio_get_value(struct udevice *dev, unsigned int offset); */ int sandbox_gpio_set_value(struct udevice *dev, unsigned int offset, int value); -/** - * Set or reset the simulated open drain mode of a GPIO (used only in sandbox - * test code) - * - * @param gp GPIO number - * @param value value to set (0 for enabled open drain mode, non-zero for - * disabled) - * @return -1 on error, 0 if ok - */ -int sandbox_gpio_set_open_drain(struct udevice *dev, unsigned offset, int value); - -/** - * Return the state of the simulated open drain mode of a GPIO (used only in - * sandbox test code) - * - * @param gp GPIO number - * @return -1 on error, 0 if GPIO is input, >0 if output - */ -int sandbox_gpio_get_open_drain(struct udevice *dev, unsigned offset); - /** * Return the simulated direction of a GPIO (used only in sandbox test code) * diff --git a/drivers/gpio/gpio-uclass.c b/drivers/gpio/gpio-uclass.c index 0a22441d38..2515df4e7c 100644 --- a/drivers/gpio/gpio-uclass.c +++ b/drivers/gpio/gpio-uclass.c @@ -491,38 +491,6 @@ int dm_gpio_set_value(const struct gpio_desc *desc, int value) return 0; } -int dm_gpio_get_open_drain(struct gpio_desc *desc) -{ - struct dm_gpio_ops *ops = gpio_get_ops(desc->dev); - int ret; - - ret = check_reserved(desc, "get_open_drain"); - if (ret) - return ret; - - if (ops->set_open_drain) - return ops->get_open_drain(desc->dev, desc->offset); - else - return -ENOSYS; -} - -int dm_gpio_set_open_drain(struct gpio_desc *desc, int value) -{ - struct dm_gpio_ops *ops = gpio_get_ops(desc->dev); - int ret; - - ret = check_reserved(desc, "set_open_drain"); - if (ret) - return ret; - - if (ops->set_open_drain) - ret = ops->set_open_drain(desc->dev, desc->offset, value); - else - return 0; /* feature not supported -> ignore setting */ - - return ret; -} - int dm_gpio_set_dir_flags(struct gpio_desc *desc, ulong flags) { struct udevice *dev = desc->dev; @@ -1053,10 +1021,6 @@ static int gpio_post_bind(struct udevice *dev) ops->get_value += gd->reloc_off; if (ops->set_value) ops->set_value += gd->reloc_off; - if (ops->get_open_drain) - ops->get_open_drain += gd->reloc_off; - if (ops->set_open_drain) - ops->set_open_drain += gd->reloc_off; if (ops->get_function) ops->get_function += gd->reloc_off; if (ops->xlate) diff --git a/drivers/gpio/mpc8xxx_gpio.c b/drivers/gpio/mpc8xxx_gpio.c index 4b385b8b39..1dfd22522c 100644 --- a/drivers/gpio/mpc8xxx_gpio.c +++ b/drivers/gpio/mpc8xxx_gpio.c @@ -133,26 +133,6 @@ static int mpc8xxx_gpio_get_value(struct udevice *dev, uint gpio) return !!mpc8xxx_gpio_get_val(data->base, gpio_mask(gpio)); } -static int mpc8xxx_gpio_get_open_drain(struct udevice *dev, uint gpio) -{ - struct mpc8xxx_gpio_data *data = dev_get_priv(dev); - - return !!mpc8xxx_gpio_open_drain_val(data->base, gpio_mask(gpio)); -} - -static int mpc8xxx_gpio_set_open_drain(struct udevice *dev, uint gpio, - int value) -{ - struct mpc8xxx_gpio_data *data = dev_get_priv(dev); - - if (value) - mpc8xxx_gpio_open_drain_on(data->base, gpio_mask(gpio)); - else - mpc8xxx_gpio_open_drain_off(data->base, gpio_mask(gpio)); - - return 0; -} - static int mpc8xxx_gpio_get_function(struct udevice *dev, uint gpio) { struct mpc8xxx_gpio_data *data = dev_get_priv(dev); @@ -229,8 +209,6 @@ static const struct dm_gpio_ops gpio_mpc8xxx_ops = { .direction_output = mpc8xxx_gpio_direction_output, .get_value = mpc8xxx_gpio_get_value, .set_value = mpc8xxx_gpio_set_value, - .get_open_drain = mpc8xxx_gpio_get_open_drain, - .set_open_drain = mpc8xxx_gpio_set_open_drain, .get_function = mpc8xxx_gpio_get_function, }; diff --git a/drivers/gpio/sandbox.c b/drivers/gpio/sandbox.c index 2ef5c67ad5..91e8e0677e 100644 --- a/drivers/gpio/sandbox.c +++ b/drivers/gpio/sandbox.c @@ -14,7 +14,6 @@ /* Flags for each GPIO */ #define GPIOF_OUTPUT (1 << 0) /* Currently set as an output */ #define GPIOF_HIGH (1 << 1) /* Currently set high */ -#define GPIOF_ODR (1 << 2) /* Currently set to open drain mode */ struct gpio_state { const char *label; /* label given by requester */ @@ -70,16 +69,6 @@ int sandbox_gpio_set_value(struct udevice *dev, unsigned offset, int value) return set_gpio_flag(dev, offset, GPIOF_HIGH, value); } -int sandbox_gpio_get_open_drain(struct udevice *dev, unsigned offset) -{ - return get_gpio_flag(dev, offset, GPIOF_ODR); -} - -int sandbox_gpio_set_open_drain(struct udevice *dev, unsigned offset, int value) -{ - return set_gpio_flag(dev, offset, GPIOF_ODR, value); -} - int sandbox_gpio_get_direction(struct udevice *dev, unsigned offset) { return get_gpio_flag(dev, offset, GPIOF_OUTPUT); @@ -134,28 +123,6 @@ static int sb_gpio_set_value(struct udevice *dev, unsigned offset, int value) return sandbox_gpio_set_value(dev, offset, value); } -/* read GPIO ODR value of port 'offset' */ -static int sb_gpio_get_open_drain(struct udevice *dev, unsigned offset) -{ - debug("%s: offset:%u\n", __func__, offset); - - return sandbox_gpio_get_open_drain(dev, offset); -} - -/* write GPIO ODR value to port 'offset' */ -static int sb_gpio_set_open_drain(struct udevice *dev, unsigned offset, int value) -{ - debug("%s: offset:%u, value = %d\n", __func__, offset, value); - - if (!sandbox_gpio_get_direction(dev, offset)) { - printf("sandbox_gpio: error: set_open_drain on input gpio %u\n", - offset); - return -1; - } - - return sandbox_gpio_set_open_drain(dev, offset, value); -} - static int sb_gpio_get_function(struct udevice *dev, unsigned offset) { if (get_gpio_flag(dev, offset, GPIOF_OUTPUT)) @@ -186,8 +153,6 @@ static const struct dm_gpio_ops gpio_sandbox_ops = { .direction_output = sb_gpio_direction_output, .get_value = sb_gpio_get_value, .set_value = sb_gpio_set_value, - .get_open_drain = sb_gpio_get_open_drain, - .set_open_drain = sb_gpio_set_open_drain, .get_function = sb_gpio_get_function, .xlate = sb_gpio_xlate, }; diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h index 4064efeb8d..4d5348d8c8 100644 --- a/include/asm-generic/gpio.h +++ b/include/asm-generic/gpio.h @@ -253,8 +253,6 @@ struct dm_gpio_ops { int value); int (*get_value)(struct udevice *dev, unsigned offset); int (*set_value)(struct udevice *dev, unsigned offset, int value); - int (*get_open_drain)(struct udevice *dev, unsigned offset); - int (*set_open_drain)(struct udevice *dev, unsigned offset, int value); /** * get_function() Get the GPIO function * @@ -585,38 +583,6 @@ int dm_gpio_get_value(const struct gpio_desc *desc); int dm_gpio_set_value(const struct gpio_desc *desc, int value); -/** - * dm_gpio_get_open_drain() - Check if open-drain-mode of a GPIO is active - * - * This checks if open-drain-mode for a GPIO is enabled or not. This method is - * optional. - * - * @desc: GPIO description containing device, offset and flags, - * previously returned by gpio_request_by_name() - * @return Value of open drain mode for GPIO (0 for inactive, 1 for active) or - * -ve on error - */ -int dm_gpio_get_open_drain(struct gpio_desc *desc); - -/** - * dm_gpio_set_open_drain() - Switch open-drain-mode of a GPIO on or off - * - * This enables or disables open-drain mode for a GPIO. This method is - * optional; if the driver does not support it, nothing happens when the method - * is called. - * - * In open-drain mode, instead of actively driving the output (Push-pull - * output), the GPIO's pin is connected to the collector (for a NPN transistor) - * or the drain (for a MOSFET) of a transistor, respectively. The pin then - * either forms an open circuit or a connection to ground, depending on the - * state of the transistor. - * - * @desc: GPIO description containing device, offset and flags, - * previously returned by gpio_request_by_name() - * @return 0 if OK, -ve on error - */ -int dm_gpio_set_open_drain(struct gpio_desc *desc, int value); - /** * dm_gpio_set_dir() - Set the direction for a GPIO * diff --git a/test/dm/gpio.c b/test/dm/gpio.c index 349123a657..2dfb9fd430 100644 --- a/test/dm/gpio.c +++ b/test/dm/gpio.c @@ -73,13 +73,6 @@ static int dm_test_gpio(struct unit_test_state *uts) ut_assertok(ops->set_value(dev, offset, 1)); ut_asserteq(1, ops->get_value(dev, offset)); - /* Make it an open drain output, and reset it */ - ut_asserteq(0, sandbox_gpio_get_open_drain(dev, offset)); - ut_assertok(ops->set_open_drain(dev, offset, 1)); - ut_asserteq(1, sandbox_gpio_get_open_drain(dev, offset)); - ut_assertok(ops->set_open_drain(dev, offset, 0)); - ut_asserteq(0, sandbox_gpio_get_open_drain(dev, offset)); - /* Make it an input */ ut_assertok(ops->direction_input(dev, offset)); ut_assertok(gpio_get_status(dev, offset, buf, sizeof(buf)));