From: Marek Vasut Date: Thu, 12 Jan 2023 17:58:40 +0000 (+0100) Subject: ARM: stm32: Factor out save_boot_params X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=dbeaca79b7924d46a51228fa0b1db3462036b5e0;p=u-boot.git ARM: stm32: Factor out save_boot_params The STM32MP15xx platform currently comes with two incompatible implementations of save_boot_params() weak function override. Factor the save_boot_params() implementation into common cpu.c code and provide accessors to read out both ROM API table address and DT address from any place in the code instead. Reviewed-by: Patrice Chotard Reviewed-by: Patrick Delaunay Signed-off-by: Marek Vasut --- diff --git a/arch/arm/mach-stm32mp/boot_params.c b/arch/arm/mach-stm32mp/boot_params.c index e91ef1b2fc..24d04dcf0f 100644 --- a/arch/arm/mach-stm32mp/boot_params.c +++ b/arch/arm/mach-stm32mp/boot_params.c @@ -8,33 +8,18 @@ #include #include #include +#include #include #include -/* - * Force data-section, as .bss will not be valid - * when save_boot_params is invoked. - */ -static unsigned long nt_fw_dtb __section(".data"); - -/* - * Save the FDT address provided by TF-A in r2 at boot time - * This function is called from start.S - */ -void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2, - unsigned long r3) -{ - nt_fw_dtb = r2; - - save_boot_params_ret(); -} - /* * Use the saved FDT address provided by TF-A at boot time (NT_FW_CONFIG = * Non Trusted Firmware configuration file) when the pointer is valid */ void *board_fdt_blob_setup(int *err) { + unsigned long nt_fw_dtb = get_stm32mp_bl2_dtb(); + log_debug("%s: nt_fw_dtb=%lx\n", __func__, nt_fw_dtb); *err = 0; diff --git a/arch/arm/mach-stm32mp/cpu.c b/arch/arm/mach-stm32mp/cpu.c index 855fc755fe..ee59866bb7 100644 --- a/arch/arm/mach-stm32mp/cpu.c +++ b/arch/arm/mach-stm32mp/cpu.c @@ -378,3 +378,38 @@ int arch_misc_init(void) return 0; } + +/* + * Without forcing the ".data" section, this would get saved in ".bss". BSS + * will be cleared soon after, so it's not suitable. + */ +static uintptr_t rom_api_table __section(".data"); +static uintptr_t nt_fw_dtb __section(".data"); + +/* + * The ROM gives us the API location in r0 when starting. This is only available + * during SPL, as there isn't (yet) a mechanism to pass this on to u-boot. Save + * the FDT address provided by TF-A in r2 at boot time. This function is called + * from start.S + */ +void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2, + unsigned long r3) +{ + if (IS_ENABLED(CONFIG_STM32_ECDSA_VERIFY)) + rom_api_table = r0; + + if (IS_ENABLED(CONFIG_TFABOOT)) + nt_fw_dtb = r2; + + save_boot_params_ret(); +} + +uintptr_t get_stm32mp_rom_api_table(void) +{ + return rom_api_table; +} + +uintptr_t get_stm32mp_bl2_dtb(void) +{ + return nt_fw_dtb; +} diff --git a/arch/arm/mach-stm32mp/ecdsa_romapi.c b/arch/arm/mach-stm32mp/ecdsa_romapi.c index 6156526253..12b42b9d59 100644 --- a/arch/arm/mach-stm32mp/ecdsa_romapi.c +++ b/arch/arm/mach-stm32mp/ecdsa_romapi.c @@ -24,26 +24,10 @@ struct ecdsa_rom_api { uint32_t ecc_algo); }; -/* - * Without forcing the ".data" section, this would get saved in ".bss". BSS - * will be cleared soon after, so it's not suitable. - */ -static uintptr_t rom_api_loc __section(".data"); - -/* - * The ROM gives us the API location in r0 when starting. This is only available - * during SPL, as there isn't (yet) a mechanism to pass this on to u-boot. - */ -void save_boot_params(unsigned long r0, unsigned long r1, unsigned long r2, - unsigned long r3) -{ - rom_api_loc = r0; - save_boot_params_ret(); -} - static void stm32mp_rom_get_ecdsa_functions(struct ecdsa_rom_api *rom) { - uintptr_t verify_ptr = rom_api_loc + ROM_API_OFFSET_ECDSA_VERIFY; + uintptr_t verify_ptr = get_stm32mp_rom_api_table() + + ROM_API_OFFSET_ECDSA_VERIFY; rom->ecdsa_verify_signature = *(void **)verify_ptr; } diff --git a/arch/arm/mach-stm32mp/include/mach/sys_proto.h b/arch/arm/mach-stm32mp/include/mach/sys_proto.h index f19a70e53e..0d39b67178 100644 --- a/arch/arm/mach-stm32mp/include/mach/sys_proto.h +++ b/arch/arm/mach-stm32mp/include/mach/sys_proto.h @@ -77,3 +77,6 @@ void stm32mp_misc_init(void); /* helper function: read data from OTP */ u32 get_otp(int index, int shift, int mask); + +uintptr_t get_stm32mp_rom_api_table(void); +uintptr_t get_stm32mp_bl2_dtb(void);