From: Simon Glass Date: Thu, 5 May 2016 13:28:19 +0000 (-0600) Subject: at91: video: Prepare for driver-model conversion X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=d63ec26a49a1ae8c0fd65c24e8c0b6c67b79cd01;p=u-boot.git at91: video: Prepare for driver-model conversion Adjust the driver to use struct display_timing for its display timing. This is what is used by driver-model and allows the LCD init code to be common. Signed-off-by: Simon Glass Reviewed-by: Andreas Bießmann --- diff --git a/drivers/video/atmel_lcdfb.c b/drivers/video/atmel_lcdfb.c index d43d8a59d3..37838a86d7 100644 --- a/drivers/video/atmel_lcdfb.c +++ b/drivers/video/atmel_lcdfb.c @@ -7,6 +7,7 @@ */ #include +#include #include #include #include @@ -91,39 +92,41 @@ void lcd_set_cmap(struct bmp_image *bmp, unsigned colors) } } -void lcd_ctrl_init(void *lcdbase) +static void atmel_fb_init(ulong addr, struct display_timing *timing, int bpix, + bool tft, bool cont_pol_low, ulong lcdbase) { unsigned long value; + void *reg = (void *)addr; /* Turn off the LCD controller and the DMA controller */ - lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON, + lcdc_writel(reg, ATMEL_LCDC_PWRCON, ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET); /* Wait for the LCDC core to become idle */ - while (lcdc_readl(panel_info.mmio, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY) + while (lcdc_readl(reg, ATMEL_LCDC_PWRCON) & ATMEL_LCDC_BUSY) udelay(10); - lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, 0); + lcdc_writel(reg, ATMEL_LCDC_DMACON, 0); /* Reset LCDC DMA */ - lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST); + lcdc_writel(reg, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMARST); /* ...set frame size and burst length = 8 words (?) */ - value = (panel_info.vl_col * panel_info.vl_row * - NBITS(panel_info.vl_bpix)) / 32; + value = (timing->hactive.typ * timing->vactive.typ * + (1 << bpix)) / 32; value |= ((ATMEL_LCDC_DMA_BURST_LEN - 1) << ATMEL_LCDC_BLENGTH_OFFSET); - lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMAFRMCFG, value); + lcdc_writel(reg, ATMEL_LCDC_DMAFRMCFG, value); /* Set pixel clock */ - value = get_lcdc_clk_rate(0) / panel_info.vl_clk; - if (get_lcdc_clk_rate(0) % panel_info.vl_clk) + value = get_lcdc_clk_rate(0) / timing->pixelclock.typ; + if (get_lcdc_clk_rate(0) % timing->pixelclock.typ) value++; value = (value / 2) - 1; if (!value) { - lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS); + lcdc_writel(reg, ATMEL_LCDC_LCDCON1, ATMEL_LCDC_BYPASS); } else - lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON1, + lcdc_writel(reg, ATMEL_LCDC_LCDCON1, value << ATMEL_LCDC_CLKVAL_OFFSET); /* Initialize control register 2 */ @@ -132,56 +135,87 @@ void lcd_ctrl_init(void *lcdbase) #else value = ATMEL_LCDC_MEMOR_LITTLE | ATMEL_LCDC_CLKMOD_ALWAYSACTIVE; #endif - if (panel_info.vl_tft) + if (tft) value |= ATMEL_LCDC_DISTYPE_TFT; - value |= panel_info.vl_sync; - value |= (panel_info.vl_bpix << 5); - lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDCON2, value); + if (!(timing->flags & DISPLAY_FLAGS_HSYNC_HIGH)) + value |= ATMEL_LCDC_INVLINE_INVERTED; + if (!(timing->flags & DISPLAY_FLAGS_VSYNC_HIGH)) + value |= ATMEL_LCDC_INVFRAME_INVERTED; + value |= bpix << 5; + lcdc_writel(reg, ATMEL_LCDC_LCDCON2, value); /* Vertical timing */ - value = (panel_info.vl_vsync_len - 1) << ATMEL_LCDC_VPW_OFFSET; - value |= panel_info.vl_upper_margin << ATMEL_LCDC_VBP_OFFSET; - value |= panel_info.vl_lower_margin; - lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM1, value); + value = (timing->vsync_len.typ - 1) << ATMEL_LCDC_VPW_OFFSET; + value |= timing->vback_porch.typ << ATMEL_LCDC_VBP_OFFSET; + value |= timing->vfront_porch.typ; + /* Magic! (Datasheet says "Bit 31 must be written to 1") */ + value |= 1U << 31; + lcdc_writel(reg, ATMEL_LCDC_TIM1, value); /* Horizontal timing */ - value = (panel_info.vl_right_margin - 1) << ATMEL_LCDC_HFP_OFFSET; - value |= (panel_info.vl_hsync_len - 1) << ATMEL_LCDC_HPW_OFFSET; - value |= (panel_info.vl_left_margin - 1); - lcdc_writel(panel_info.mmio, ATMEL_LCDC_TIM2, value); + value = (timing->hfront_porch.typ - 1) << ATMEL_LCDC_HFP_OFFSET; + value |= (timing->hsync_len.typ - 1) << ATMEL_LCDC_HPW_OFFSET; + value |= (timing->hback_porch.typ - 1); + lcdc_writel(reg, ATMEL_LCDC_TIM2, value); /* Display size */ - value = (panel_info.vl_col - 1) << ATMEL_LCDC_HOZVAL_OFFSET; - value |= panel_info.vl_row - 1; - lcdc_writel(panel_info.mmio, ATMEL_LCDC_LCDFRMCFG, value); + value = (timing->hactive.typ - 1) << ATMEL_LCDC_HOZVAL_OFFSET; + value |= timing->vactive.typ - 1; + lcdc_writel(reg, ATMEL_LCDC_LCDFRMCFG, value); /* FIFO Threshold: Use formula from data sheet */ value = ATMEL_LCDC_FIFO_SIZE - (2 * ATMEL_LCDC_DMA_BURST_LEN + 3); - lcdc_writel(panel_info.mmio, ATMEL_LCDC_FIFO, value); + lcdc_writel(reg, ATMEL_LCDC_FIFO, value); /* Toggle LCD_MODE every frame */ - lcdc_writel(panel_info.mmio, ATMEL_LCDC_MVAL, 0); + lcdc_writel(reg, ATMEL_LCDC_MVAL, 0); /* Disable all interrupts */ - lcdc_writel(panel_info.mmio, ATMEL_LCDC_IDR, ~0UL); + lcdc_writel(reg, ATMEL_LCDC_IDR, ~0UL); /* Set contrast */ value = ATMEL_LCDC_PS_DIV8 | ATMEL_LCDC_ENA_PWMENABLE; - if (!panel_info.vl_cont_pol_low) + if (!cont_pol_low) value |= ATMEL_LCDC_POL_POSITIVE; - lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_CTR, value); - lcdc_writel(panel_info.mmio, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT); + lcdc_writel(reg, ATMEL_LCDC_CONTRAST_CTR, value); + lcdc_writel(reg, ATMEL_LCDC_CONTRAST_VAL, ATMEL_LCDC_CVAL_DEFAULT); /* Set framebuffer DMA base address and pixel offset */ - lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMABADDR1, (u_long)lcdbase); + lcdc_writel(reg, ATMEL_LCDC_DMABADDR1, lcdbase); - lcdc_writel(panel_info.mmio, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMAEN); - lcdc_writel(panel_info.mmio, ATMEL_LCDC_PWRCON, + lcdc_writel(reg, ATMEL_LCDC_DMACON, ATMEL_LCDC_DMAEN); + lcdc_writel(reg, ATMEL_LCDC_PWRCON, (ATMEL_LCDC_GUARD_TIME << ATMEL_LCDC_GUARDT_OFFSET) | ATMEL_LCDC_PWR); } +void lcd_ctrl_init(void *lcdbase) +{ + struct display_timing timing; + + timing.flags = 0; + if (!(panel_info.vl_sync & ATMEL_LCDC_INVLINE_INVERTED)) + timing.flags |= DISPLAY_FLAGS_HSYNC_HIGH; + if (!(panel_info.vl_sync & ATMEL_LCDC_INVFRAME_INVERTED)) + timing.flags |= DISPLAY_FLAGS_VSYNC_LOW; + timing.pixelclock.typ = panel_info.vl_clk; + + timing.hactive.typ = panel_info.vl_col; + timing.hfront_porch.typ = panel_info.vl_right_margin; + timing.hback_porch.typ = panel_info.vl_left_margin; + timing.hsync_len.typ = panel_info.vl_hsync_len; + + timing.vactive.typ = panel_info.vl_row; + timing.vfront_porch.typ = panel_info.vl_clk; + timing.vback_porch.typ = panel_info.vl_clk; + timing.vsync_len.typ = panel_info.vl_clk; + + atmel_fb_init(panel_info.mmio, &timing, panel_info.vl_bpix, + panel_info.vl_tft, panel_info.vl_cont_pol_low, + (ulong)lcdbase); +} + ulong calc_fbsize(void) { return ((panel_info.vl_col * panel_info.vl_row *