From: Marek Vasut Date: Sat, 13 Jul 2024 13:19:05 +0000 (+0200) Subject: arm: include: Remove duplicate newlines X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=d610edbcd63a0ffeceb8d8f19068a6eae896ad00;p=u-boot.git arm: include: Remove duplicate newlines Drop all duplicate newlines. No functional change. Signed-off-by: Marek Vasut --- diff --git a/arch/arm/include/asm/byteorder.h b/arch/arm/include/asm/byteorder.h index 20cce7657e..6a80be5750 100644 --- a/arch/arm/include/asm/byteorder.h +++ b/arch/arm/include/asm/byteorder.h @@ -15,7 +15,6 @@ #ifndef __ASM_ARM_BYTEORDER_H #define __ASM_ARM_BYTEORDER_H - #include #if !defined(__STRICT_ANSI__) || defined(__KERNEL__) diff --git a/arch/arm/include/asm/emif.h b/arch/arm/include/asm/emif.h index 2141a4581c..4a9e26f634 100644 --- a/arch/arm/include/asm/emif.h +++ b/arch/arm/include/asm/emif.h @@ -880,7 +880,6 @@ struct dmm_lisa_map_regs { #define RL_FINAL 6 #endif - /* Interleaving policies at EMIF level- between banks and Chip Selects */ #define EMIF_INTERLEAVING_POLICY_MAX_INTERLEAVING 0 #define EMIF_INTERLEAVING_POLICY_NO_BANK_INTERLEAVING 3 @@ -913,7 +912,6 @@ struct dmm_lisa_map_regs { */ #define READ_IDLE_INTERVAL_NORMAL (50*1000) - /* * Unless voltage is changing due to DVFS one ZQCS command every 50ms should * be enough. This shoule be enough also in the case when voltage is changing @@ -961,7 +959,6 @@ struct dmm_lisa_map_regs { #define REG_SR_TIM 0xF #define REG_PD_TIM 0xF - /* EMIF_PWR_MGMT_CTRL register */ #define EMIF_PWR_MGMT_CTRL (\ ((REG_CS_TIM << EMIF_REG_CS_TIM_SHIFT) & EMIF_REG_CS_TIM_MASK)|\ diff --git a/arch/arm/include/asm/mach-imx/gpio.h b/arch/arm/include/asm/mach-imx/gpio.h index 25763526f5..f7d751f402 100644 --- a/arch/arm/include/asm/mach-imx/gpio.h +++ b/arch/arm/include/asm/mach-imx/gpio.h @@ -4,7 +4,6 @@ * Stefano Babic, DENX Software Engineering, */ - #ifndef __ASM_ARCH_IMX_GPIO_H #define __ASM_ARCH_IMX_GPIO_H diff --git a/arch/arm/include/asm/mach-imx/mxc_i2c.h b/arch/arm/include/asm/mach-imx/mxc_i2c.h index e8b330f33d..cf694de497 100644 --- a/arch/arm/include/asm/mach-imx/mxc_i2c.h +++ b/arch/arm/include/asm/mach-imx/mxc_i2c.h @@ -91,7 +91,6 @@ struct mxc_i2c_bus { } \ }; - #define I2C_PADS_INFO(name) \ (is_mx6dq() || is_mx6dqp()) ? &mx6q_##name : &mx6s_##name #endif diff --git a/arch/arm/include/asm/omap_common.h b/arch/arm/include/asm/omap_common.h index 17fdfbcffb..9945eeb66b 100644 --- a/arch/arm/include/asm/omap_common.h +++ b/arch/arm/include/asm/omap_common.h @@ -814,7 +814,6 @@ static inline u8 is_dra76x_acd(void) #define HS_DEVICE 0x2 #define GP_DEVICE 0x3 - /* * SRAM scratch space entries */ diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h index 21b3344298..bc2f9e7081 100644 --- a/arch/arm/include/asm/opcodes.h +++ b/arch/arm/include/asm/opcodes.h @@ -15,7 +15,6 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); #define ARM_OPCODE_CONDTEST_PASS 1 #define ARM_OPCODE_CONDTEST_UNCOND 2 - /* * Assembler opcode byteswap helpers. * These are only intended for use by this header: don't use them directly, @@ -42,7 +41,6 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); #define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF) #define ___asm_opcode_identity16(x) ((x) & 0xFFFF) - /* * Opcode byteswap helpers * @@ -94,7 +92,6 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); #endif /* ! __ASSEMBLY__ */ - #ifdef CONFIG_CPU_ENDIAN_BE8 #define __opcode_to_mem_arm(x) ___opcode_swab32(x) diff --git a/arch/arm/include/asm/setup.h b/arch/arm/include/asm/setup.h index e0e2d7e360..b8ca50a640 100644 --- a/arch/arm/include/asm/setup.h +++ b/arch/arm/include/asm/setup.h @@ -75,7 +75,6 @@ struct param_struct { char commandline[COMMAND_LINE_SIZE]; }; - /* * The new way of passing information: a list of tagged entries */