From: Vignesh Raghavendra Date: Thu, 2 Apr 2020 13:29:12 +0000 (+0530) Subject: arm: dts: k3-am654: Increase OSPI default frequency to 50MHz X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=d5a1f4f551761773066aa1ba6276036d10bdf75f;p=u-boot.git arm: dts: k3-am654: Increase OSPI default frequency to 50MHz In 1 bit mode OSPI can work at upto 50MHz, this provides better write performance. Therefore increase frequency from 40MHz to 50MHz Signed-off-by: Vignesh Raghavendra --- diff --git a/arch/arm/dts/k3-am654-base-board.dts b/arch/arm/dts/k3-am654-base-board.dts index 5058b6c88e..3ebf4af5e4 100644 --- a/arch/arm/dts/k3-am654-base-board.dts +++ b/arch/arm/dts/k3-am654-base-board.dts @@ -191,7 +191,7 @@ reg = <0x0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <8>; - spi-max-frequency = <40000000>; + spi-max-frequency = <50000000>; cdns,tshsl-ns = <60>; cdns,tsd2d-ns = <60>; cdns,tchsh-ns = <60>; diff --git a/arch/arm/dts/k3-am654-r5-base-board.dts b/arch/arm/dts/k3-am654-r5-base-board.dts index 257b56a1b0..e6b78643c1 100644 --- a/arch/arm/dts/k3-am654-r5-base-board.dts +++ b/arch/arm/dts/k3-am654-r5-base-board.dts @@ -268,7 +268,7 @@ reg = <0x0>; spi-tx-bus-width = <1>; spi-rx-bus-width = <8>; - spi-max-frequency = <40000000>; + spi-max-frequency = <50000000>; cdns,tshsl-ns = <60>; cdns,tsd2d-ns = <60>; cdns,tchsh-ns = <60>;