From: Simon Glass Date: Sat, 22 Jan 2022 12:53:24 +0000 (-0700) Subject: Convert CONFIG_SYS_IDE_MAXBUS et al to Kconfig X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=d2da54bfc45371e4f5c31409554dfc78da1e2329;p=u-boot.git Convert CONFIG_SYS_IDE_MAXBUS et al to Kconfig This converts the following to Kconfig: CONFIG_SYS_IDE_MAXBUS CONFIG_SYS_IDE_MAXDEVICE CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ATA_STRIDE CONFIG_SYS_ATA_DATA_OFFSET CONFIG_SYS_ATA_REG_OFFSET CONFIG_SYS_ATA_ALT_OFFSET CONFIG_SYS_ATA_IDE0_OFFSET CONFIG_SYS_ATA_IDE1_OFFSET CONFIG_ATAPI CONFIG_IDE_RESET Signed-off-by: Simon Glass Reviewed-by: Stefan Roese --- diff --git a/README b/README index 4cad8f8356..3870b0dbe4 100644 --- a/README +++ b/README @@ -720,17 +720,6 @@ The following options need to be configured: CONFIG_SCSI) you must configure support for at least one non-MTD partition type as well. -- IDE Reset method: - CONFIG_IDE_RESET - is this is defined, IDE Reset will - be performed by calling the function - ide_set_reset(int reset) - which has to be defined in a board specific file - -- ATAPI Support: - CONFIG_ATAPI - - Set this to enable ATAPI support. - - LBA48 Support CONFIG_LBA48 diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h index eb9502361e..b9f836bbaf 100644 --- a/arch/arm/mach-kirkwood/include/mach/config.h +++ b/arch/arm/mach-kirkwood/include/mach/config.h @@ -59,18 +59,11 @@ #ifdef CONFIG_IDE #define __io /* Data, registers and alternate blocks are at the same offset */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0100) -#define CONFIG_SYS_ATA_REG_OFFSET (0x0100) -#define CONFIG_SYS_ATA_ALT_OFFSET (0x0100) /* Each 8-bit ATA register is aligned to a 4-bytes address */ -#define CONFIG_SYS_ATA_STRIDE 4 /* Controller supports 48-bits LBA addressing */ #define CONFIG_LBA48 /* CONFIG_IDE requires some #defines for ATA registers */ -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_IDE_MAXDEVICE 2 /* ATA registers base is at SATA controller base */ -#define CONFIG_SYS_ATA_BASE_ADDR MV_SATA_BASE #endif /* CONFIG_IDE */ /* Use common timer */ diff --git a/configs/M5253DEMO_defconfig b/configs/M5253DEMO_defconfig index 67f9875829..348f525bbb 100644 --- a/configs/M5253DEMO_defconfig +++ b/configs/M5253DEMO_defconfig @@ -20,6 +20,14 @@ CONFIG_CMD_FAT=y CONFIG_MAC_PARTITION=y CONFIG_ENV_ADDR=0xFF804000 CONFIG_SYS_RELOC_GD_ENV_ADDR=y +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0xA0 +CONFIG_SYS_ATA_REG_OFFSET=0xA0 +CONFIG_SYS_ATA_ALT_OFFSET=0xC0 +CONFIG_SYS_ATA_IDE0_OFFSET=0 +CONFIG_ATAPI=y +CONFIG_IDE_RESET=y CONFIG_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_FSL=y CONFIG_SYS_FSL_I2C_OFFSET=0x280 diff --git a/configs/coreboot64_defconfig b/configs/coreboot64_defconfig index 8b88a08b08..933bea6116 100644 --- a/configs/coreboot64_defconfig +++ b/configs/coreboot64_defconfig @@ -47,6 +47,11 @@ CONFIG_TFTP_TSIZE=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set +CONFIG_SYS_IDE_MAXDEVICE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_ALT_OFFSET=0 +CONFIG_ATAPI=y # CONFIG_PCI_PNP is not set CONFIG_SOUND=y CONFIG_SOUND_I8254=y diff --git a/configs/coreboot_defconfig b/configs/coreboot_defconfig index 621b736fed..dcf8ab38a6 100644 --- a/configs/coreboot_defconfig +++ b/configs/coreboot_defconfig @@ -42,6 +42,11 @@ CONFIG_TFTP_TSIZE=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set +CONFIG_SYS_IDE_MAXDEVICE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_ALT_OFFSET=0 +CONFIG_ATAPI=y # CONFIG_PCI_PNP is not set CONFIG_SOUND=y CONFIG_SOUND_I8254=y diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig index 144fd30706..1d6a24abed 100644 --- a/configs/dns325_defconfig +++ b/configs/dns325_defconfig @@ -41,6 +41,10 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_NAND=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 CONFIG_KIRKWOOD_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig index 557013dbac..b7bc0e47dd 100644 --- a/configs/dreamplug_defconfig +++ b/configs/dreamplug_defconfig @@ -41,6 +41,10 @@ CONFIG_NET_RANDOM_ETHADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y CONFIG_SATA_MV=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_DM_SPI_FLASH=y diff --git a/configs/ds109_defconfig b/configs/ds109_defconfig index 8e2aea9ad6..130a92780c 100644 --- a/configs/ds109_defconfig +++ b/configs/ds109_defconfig @@ -39,6 +39,10 @@ CONFIG_ENV_SPI_MAX_HZ=50000000 CONFIG_ENV_ADDR=0x3D0000 CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 CONFIG_DM_I2C=y CONFIG_SYS_I2C_MVTWSI=y # CONFIG_MMC is not set diff --git a/configs/edminiv2_defconfig b/configs/edminiv2_defconfig index a8f61e4844..1108d7cf22 100644 --- a/configs/edminiv2_defconfig +++ b/configs/edminiv2_defconfig @@ -33,6 +33,14 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xFFF84000 CONFIG_NETCONSOLE=y +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_IDE_MAXDEVICE=1 +CONFIG_SYS_ATA_BASE_ADDR=0xf1080000 +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 +CONFIG_SYS_ATA_IDE0_OFFSET=0x4000 CONFIG_SYS_I2C_LEGACY=y CONFIG_SPL_SYS_I2C_LEGACY=y CONFIG_SYS_I2C_MVTWSI=y diff --git a/configs/efi-x86_payload32_defconfig b/configs/efi-x86_payload32_defconfig index ed6fed2555..04573fc4df 100644 --- a/configs/efi-x86_payload32_defconfig +++ b/configs/efi-x86_payload32_defconfig @@ -40,6 +40,11 @@ CONFIG_TFTP_TSIZE=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set +CONFIG_SYS_IDE_MAXDEVICE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_ALT_OFFSET=0 +CONFIG_ATAPI=y # CONFIG_PCI_PNP is not set # CONFIG_GZIP is not set CONFIG_EFI=y diff --git a/configs/efi-x86_payload64_defconfig b/configs/efi-x86_payload64_defconfig index 1d4d1f3108..df904c8691 100644 --- a/configs/efi-x86_payload64_defconfig +++ b/configs/efi-x86_payload64_defconfig @@ -40,6 +40,11 @@ CONFIG_TFTP_TSIZE=y CONFIG_REGMAP=y CONFIG_SYSCON=y # CONFIG_ACPIGEN is not set +CONFIG_SYS_IDE_MAXDEVICE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_ALT_OFFSET=0 +CONFIG_ATAPI=y # CONFIG_PCI_PNP is not set # CONFIG_GZIP is not set CONFIG_EFI=y diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig index e7802afb0a..e30467557c 100644 --- a/configs/guruplug_defconfig +++ b/configs/guruplug_defconfig @@ -43,6 +43,10 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig index 23a211c391..2655124f80 100644 --- a/configs/ib62x0_defconfig +++ b/configs/ib62x0_defconfig @@ -42,6 +42,12 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 +CONFIG_SYS_ATA_IDE0_OFFSET=0x2000 +CONFIG_SYS_ATA_IDE1_OFFSET=0x4000 # CONFIG_MMC is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/malta64_defconfig b/configs/malta64_defconfig index 9e6d8c0dc6..1c1bc4e4cd 100644 --- a/configs/malta64_defconfig +++ b/configs/malta64_defconfig @@ -25,6 +25,10 @@ CONFIG_CMD_DATE=y # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xFFFFFFFFBE3E0000 +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y diff --git a/configs/malta64el_defconfig b/configs/malta64el_defconfig index c44aa7e26d..756138daaf 100644 --- a/configs/malta64el_defconfig +++ b/configs/malta64el_defconfig @@ -27,6 +27,10 @@ CONFIG_CMD_DATE=y # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xFFFFFFFFBE3E0000 +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y diff --git a/configs/malta_defconfig b/configs/malta_defconfig index 852e5c03be..802cc370e9 100644 --- a/configs/malta_defconfig +++ b/configs/malta_defconfig @@ -24,6 +24,10 @@ CONFIG_CMD_DATE=y # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xBE3E0000 +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y diff --git a/configs/maltael_defconfig b/configs/maltael_defconfig index b81ab6e33a..f929fc82d2 100644 --- a/configs/maltael_defconfig +++ b/configs/maltael_defconfig @@ -26,6 +26,10 @@ CONFIG_CMD_DATE=y # CONFIG_ISO_PARTITION is not set CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xBE3E0000 +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_IDE0_OFFSET=0x01f0 CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig index 7e4e19a9f7..f6a1dcbee0 100644 --- a/configs/nas220_defconfig +++ b/configs/nas220_defconfig @@ -42,6 +42,10 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 CONFIG_KIRKWOOD_GPIO=y # CONFIG_MMC is not set CONFIG_MTD=y diff --git a/configs/openrd_base_defconfig b/configs/openrd_base_defconfig index 2c5a29cfe3..a2fdafd10e 100644 --- a/configs/openrd_base_defconfig +++ b/configs/openrd_base_defconfig @@ -43,6 +43,12 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 +CONFIG_SYS_ATA_IDE0_OFFSET=0x2000 +CONFIG_SYS_ATA_IDE1_OFFSET=0x4000 # CONFIG_MMC_HW_PARTITIONING is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/openrd_client_defconfig b/configs/openrd_client_defconfig index b21d41b1ed..208deb4ce1 100644 --- a/configs/openrd_client_defconfig +++ b/configs/openrd_client_defconfig @@ -44,6 +44,12 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 +CONFIG_SYS_ATA_IDE0_OFFSET=0x2000 +CONFIG_SYS_ATA_IDE1_OFFSET=0x4000 # CONFIG_MMC_HW_PARTITIONING is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/openrd_ultimate_defconfig b/configs/openrd_ultimate_defconfig index ceeb62109a..d7269c4086 100644 --- a/configs/openrd_ultimate_defconfig +++ b/configs/openrd_ultimate_defconfig @@ -44,6 +44,12 @@ CONFIG_ENV_IS_IN_NAND=y CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_NETCONSOLE=y CONFIG_DM=y +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0x100 +CONFIG_SYS_ATA_REG_OFFSET=0x100 +CONFIG_SYS_ATA_ALT_OFFSET=0x100 +CONFIG_SYS_ATA_IDE0_OFFSET=0x2000 +CONFIG_SYS_ATA_IDE1_OFFSET=0x4000 # CONFIG_MMC_HW_PARTITIONING is not set CONFIG_MTD=y CONFIG_MTD_RAW_NAND=y diff --git a/configs/qemu-x86_64_defconfig b/configs/qemu-x86_64_defconfig index 74beffc3fc..6d1a6ba66f 100644 --- a/configs/qemu-x86_64_defconfig +++ b/configs/qemu-x86_64_defconfig @@ -54,6 +54,11 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_TFTP_TSIZE=y CONFIG_REGMAP=y CONFIG_SYSCON=y +CONFIG_SYS_IDE_MAXDEVICE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_ALT_OFFSET=0 +CONFIG_ATAPI=y CONFIG_CPU=y CONFIG_NVME=y CONFIG_SPL_DM_RTC=y diff --git a/configs/qemu-x86_defconfig b/configs/qemu-x86_defconfig index 9181019b12..b0cf701996 100644 --- a/configs/qemu-x86_defconfig +++ b/configs/qemu-x86_defconfig @@ -37,6 +37,11 @@ CONFIG_SYS_RELOC_GD_ENV_ADDR=y CONFIG_TFTP_TSIZE=y CONFIG_REGMAP=y CONFIG_SYSCON=y +CONFIG_SYS_IDE_MAXDEVICE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=0 +CONFIG_SYS_ATA_ALT_OFFSET=0 +CONFIG_ATAPI=y CONFIG_CPU=y CONFIG_NVME=y CONFIG_SPI=y diff --git a/configs/r2dplus_defconfig b/configs/r2dplus_defconfig index 9e2036a946..8b5c8ff4e1 100644 --- a/configs/r2dplus_defconfig +++ b/configs/r2dplus_defconfig @@ -29,6 +29,14 @@ CONFIG_ENV_OVERWRITE=y CONFIG_ENV_IS_IN_FLASH=y CONFIG_ENV_ADDR=0xA0040000 CONFIG_DM=y +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_IDE_MAXDEVICE=1 +CONFIG_SYS_ATA_BASE_ADDR=0xb4000000 +CONFIG_SYS_ATA_STRIDE=2 +CONFIG_SYS_ATA_DATA_OFFSET=0x1000 +CONFIG_SYS_ATA_REG_OFFSET=0x1000 +CONFIG_SYS_ATA_ALT_OFFSET=0x800 +CONFIG_IDE_RESET=y CONFIG_CLK=y CONFIG_MTD_NOR_FLASH=y CONFIG_FLASH_CFI_DRIVER=y diff --git a/configs/sandbox64_defconfig b/configs/sandbox64_defconfig index c9afe4c840..e1aac61507 100644 --- a/configs/sandbox64_defconfig +++ b/configs/sandbox64_defconfig @@ -106,6 +106,13 @@ CONFIG_ADC=y CONFIG_ADC_SANDBOX=y CONFIG_AXI=y CONFIG_AXI_SANDBOX=y +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_BASE_ADDR=0x100 +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=1 +CONFIG_SYS_ATA_ALT_OFFSET=2 +CONFIG_SYS_ATA_IDE0_OFFSET=0 CONFIG_BUTTON=y CONFIG_BUTTON_GPIO=y CONFIG_CLK=y diff --git a/configs/sandbox_defconfig b/configs/sandbox_defconfig index f85274353d..faa991d453 100644 --- a/configs/sandbox_defconfig +++ b/configs/sandbox_defconfig @@ -130,6 +130,13 @@ CONFIG_ADC=y CONFIG_ADC_SANDBOX=y CONFIG_AXI=y CONFIG_AXI_SANDBOX=y +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_BASE_ADDR=0x100 +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=1 +CONFIG_SYS_ATA_ALT_OFFSET=2 +CONFIG_SYS_ATA_IDE0_OFFSET=0 CONFIG_BOOTCOUNT_LIMIT=y CONFIG_DM_BOOTCOUNT=y CONFIG_DM_BOOTCOUNT_RTC=y diff --git a/configs/sandbox_noinst_defconfig b/configs/sandbox_noinst_defconfig index 7d872ada15..3d47ea620b 100644 --- a/configs/sandbox_noinst_defconfig +++ b/configs/sandbox_noinst_defconfig @@ -110,6 +110,13 @@ CONFIG_ADC=y CONFIG_ADC_SANDBOX=y CONFIG_AXI=y CONFIG_AXI_SANDBOX=y +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_BASE_ADDR=0x100 +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=1 +CONFIG_SYS_ATA_ALT_OFFSET=2 +CONFIG_SYS_ATA_IDE0_OFFSET=0 CONFIG_CLK=y CONFIG_SPL_CLK=y CONFIG_CPU=y diff --git a/configs/sandbox_spl_defconfig b/configs/sandbox_spl_defconfig index 29a89171bc..926c34c37e 100644 --- a/configs/sandbox_spl_defconfig +++ b/configs/sandbox_spl_defconfig @@ -112,6 +112,13 @@ CONFIG_ADC=y CONFIG_ADC_SANDBOX=y CONFIG_AXI=y CONFIG_AXI_SANDBOX=y +CONFIG_SYS_IDE_MAXBUS=1 +CONFIG_SYS_ATA_BASE_ADDR=0x100 +CONFIG_SYS_ATA_STRIDE=4 +CONFIG_SYS_ATA_DATA_OFFSET=0 +CONFIG_SYS_ATA_REG_OFFSET=1 +CONFIG_SYS_ATA_ALT_OFFSET=2 +CONFIG_SYS_ATA_IDE0_OFFSET=0 CONFIG_CLK=y CONFIG_SPL_CLK=y CONFIG_CPU=y diff --git a/drivers/block/Kconfig b/drivers/block/Kconfig index 8235430497..c54b58110c 100644 --- a/drivers/block/Kconfig +++ b/drivers/block/Kconfig @@ -102,3 +102,107 @@ config IDE This allows access to raw blocks and filesystems on an IDE drive from U-Boot. See also CMD_IDE which provides an 'ide' command for performing various IDE operations. + +if IDE + +config SYS_IDE_MAXBUS + hex "Maximumm number of IDE buses" + default 2 + help + This is the number of IDE buses provided by the board. Each one + can have one or two devices. One is designated the master and the + other one the slave. It is not required to have one or both on any + controller. + +config SYS_IDE_MAXDEVICE + hex "Maximum number of IDE devices" + default 2 + help + This is the number of IDE devices which can be connected to the + board. Normally this is 2 * CONFIG_SYS_IDE_MAXBUS since up to two + devices can be connected to each bus. The number of devices actually + connected is determined by probing. + +config SYS_ATA_BASE_ADDR + hex "Base address of IDE controller" + default 0 + help + This is the address of the IDE controller, from which other addresses + are calculated. Each bus is at a fixed offset from this address, + so it assumed that they are in the same area of the I/O space or + memory. + +config SYS_ATA_STRIDE + hex "IDE port stride" + default 0x1 + help + This is the distance between each IDE register, in bytes. For an + 8-bit controller this is typically 1, meaning that the registers + appear at consecutive bytes. If the value 2 two, that might indicate + a 16-bit register space. + +config SYS_ATA_DATA_OFFSET + hex "Offset of the data register" + default 0x0 + help + This is the offset of the controller's data register from the base + address of the controller. This is typically 0, but may be something + else if there are some other registers at the start of the + controller space. + +config SYS_ATA_REG_OFFSET + hex "Offset of the register space" + default 0x0 + help + This is the offset of the controller's 'register' space from the base + address of the controller. The data register (which is typically at + offset 0) has its own CONFIG, to deal with controllers where it is + somewhere else. Register 1 will be at this offset + 1, register 2 at + CONFIG_SYS_ATA_REG_OFFSET + 2, etc. + +config SYS_ATA_ALT_OFFSET + hex "Offset of the alternative registers" + default 0x0 + help + This is the offset of the controller's 'alternative' space from the + base address of the controller. This allows these registers to be + located separately from the data and register space. + +config SYS_ATA_IDE0_OFFSET + hex "Offset of bus 0" + default 0x1f0 + help + This is the start offset of bus 0 from the start of the + controller registers. All the other registers are calculated from + this address. using the above options. For x86 hardware this is often + 0x1f0. + +config SYS_ATA_IDE1_OFFSET + hex "Offset of bus 1" + default 0x170 + help + This is the start offset of bus 1 from the start of the + controller registers. All the other registers are calculated from + this address. using the above options. For x86 hardware this is often + 0x170. + +config ATAPI + bool "Enable ATAPI support" + help + This enabled Advanced Technology Attachment Packet Interface (ATAPI), + a protocol that allows a greater variety of devices to be connected + to the IDE port than with plain ATA. It allows SCSI commands to be + sent across the bus, e.g. to support optical drives. + +config IDE_RESET + bool "Support board-specific reset" + help + If this is defined, IDE Reset will be performed by calling the + function: + + ide_set_reset(int reset) + + where reset is 1 to assert reset and 0 to de-assert it. This function + must be defined in a board-specific file. + +endif # IDE diff --git a/include/ata.h b/include/ata.h index 32ad5f6427..a7bcee6a64 100644 --- a/include/ata.h +++ b/include/ata.h @@ -19,9 +19,6 @@ * 8-bit (register) and 16-bit (data) accesses might use different * address spaces. This is implemented by the following definitions. */ -#ifndef CONFIG_SYS_ATA_STRIDE -#define CONFIG_SYS_ATA_STRIDE 1 -#endif #define ATA_IO_DATA(x) (CONFIG_SYS_ATA_DATA_OFFSET+((x) * CONFIG_SYS_ATA_STRIDE)) #define ATA_IO_REG(x) (CONFIG_SYS_ATA_REG_OFFSET +((x) * CONFIG_SYS_ATA_STRIDE)) diff --git a/include/configs/M5253DEMO.h b/include/configs/M5253DEMO.h index 6ba5c52543..c27f0a5a2d 100644 --- a/include/configs/M5253DEMO.h +++ b/include/configs/M5253DEMO.h @@ -23,21 +23,8 @@ #ifdef CONFIG_IDE /* ATA */ -# define CONFIG_IDE_RESET 1 # define CONFIG_IDE_PREINIT 1 -# define CONFIG_ATAPI # undef CONFIG_LBA48 - -# define CONFIG_SYS_IDE_MAXBUS 1 -# define CONFIG_SYS_IDE_MAXDEVICE 2 - -# define CONFIG_SYS_ATA_BASE_ADDR (CONFIG_SYS_MBAR2 + 0x800) -# define CONFIG_SYS_ATA_IDE0_OFFSET 0 - -# define CONFIG_SYS_ATA_DATA_OFFSET 0xA0 /* Offset for data I/O */ -# define CONFIG_SYS_ATA_REG_OFFSET 0xA0 /* Offset for normal register accesses */ -# define CONFIG_SYS_ATA_ALT_OFFSET 0xC0 /* Offset for alternate registers */ -# define CONFIG_SYS_ATA_STRIDE 4 /* Interval between registers */ #endif #define CONFIG_DRIVER_DM9000 diff --git a/include/configs/coreboot.h b/include/configs/coreboot.h index d6d679fd7d..23c493b258 100644 --- a/include/configs/coreboot.h +++ b/include/configs/coreboot.h @@ -22,14 +22,5 @@ "stderr=serial,vidconsole\0" /* ATA/IDE support */ -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_IDE_MAXDEVICE 4 -#define CONFIG_SYS_ATA_BASE_ADDR 0 -#define CONFIG_SYS_ATA_DATA_OFFSET 0 -#define CONFIG_SYS_ATA_REG_OFFSET 0 -#define CONFIG_SYS_ATA_ALT_OFFSET 0 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 -#define CONFIG_ATAPI #endif /* __CONFIG_H */ diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h index 90e387e6c5..a599722ae3 100644 --- a/include/configs/edminiv2.h +++ b/include/configs/edminiv2.h @@ -110,20 +110,12 @@ #ifdef CONFIG_IDE #define __io /* Data, registers and alternate blocks are at the same offset */ -#define CONFIG_SYS_ATA_DATA_OFFSET (0x0100) -#define CONFIG_SYS_ATA_REG_OFFSET (0x0100) -#define CONFIG_SYS_ATA_ALT_OFFSET (0x0100) /* Each 8-bit ATA register is aligned to a 4-bytes address */ -#define CONFIG_SYS_ATA_STRIDE 4 /* Controller supports 48-bits LBA addressing */ #define CONFIG_LBA48 /* A single bus, a single device */ -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 1 /* ATA registers base is at SATA controller base */ -#define CONFIG_SYS_ATA_BASE_ADDR ORION5X_SATA_BASE /* ATA bus 0 is orion5x port 1 on ED Mini V2 */ -#define CONFIG_SYS_ATA_IDE0_OFFSET ORION5X_SATA_PORT1_OFFSET /* end of IDE defines */ #endif /* CMD_IDE */ diff --git a/include/configs/efi-x86_payload.h b/include/configs/efi-x86_payload.h index 1cf5c037e8..59fad4c15d 100644 --- a/include/configs/efi-x86_payload.h +++ b/include/configs/efi-x86_payload.h @@ -19,14 +19,5 @@ "stderr=serial,vidconsole\0" /* ATA/IDE support */ -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_IDE_MAXDEVICE 4 -#define CONFIG_SYS_ATA_BASE_ADDR 0 -#define CONFIG_SYS_ATA_DATA_OFFSET 0 -#define CONFIG_SYS_ATA_REG_OFFSET 0 -#define CONFIG_SYS_ATA_ALT_OFFSET 0 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 -#define CONFIG_ATAPI #endif /* __CONFIG_H */ diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h index 9783fd89ec..2598deaac6 100644 --- a/include/configs/ib62x0.h +++ b/include/configs/ib62x0.h @@ -40,8 +40,6 @@ */ #ifdef CONFIG_IDE #define __io -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET #endif /* CONFIG_IDE */ #endif /* _CONFIG_IB62x0_H */ diff --git a/include/configs/lacie_kw.h b/include/configs/lacie_kw.h index 046f1888cb..7366a332f9 100644 --- a/include/configs/lacie_kw.h +++ b/include/configs/lacie_kw.h @@ -9,8 +9,6 @@ #include "mv-common.h" /* Remove or override few declarations from mv-common.h */ -#undef CONFIG_SYS_IDE_MAXBUS -#undef CONFIG_SYS_IDE_MAXDEVICE /* * Enable platform initialisation via misc_init_r() function diff --git a/include/configs/malta.h b/include/configs/malta.h index 61860ee694..6d150fd557 100644 --- a/include/configs/malta.h +++ b/include/configs/malta.h @@ -63,12 +63,6 @@ /* * IDE/ATA */ -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_IDE_MAXDEVICE 2 -#define CONFIG_SYS_ATA_BASE_ADDR CONFIG_SYS_ISA_IO_BASE_ADDRESS -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x01f0 -#define CONFIG_SYS_ATA_DATA_OFFSET 0 -#define CONFIG_SYS_ATA_REG_OFFSET 0 /* * Commands diff --git a/include/configs/openrd.h b/include/configs/openrd.h index 43d089657b..7dad002f3b 100644 --- a/include/configs/openrd.h +++ b/include/configs/openrd.h @@ -59,9 +59,5 @@ /* * SATA Driver configuration */ -#ifdef CONFIG_MVSATA_IDE -#define CONFIG_SYS_ATA_IDE0_OFFSET MV_SATA_PORT0_OFFSET -#define CONFIG_SYS_ATA_IDE1_OFFSET MV_SATA_PORT1_OFFSET -#endif /*CONFIG_MVSATA_IDE*/ #endif /* _CONFIG_OPENRD_BASE_H */ diff --git a/include/configs/qemu-x86.h b/include/configs/qemu-x86.h index 52c33600b3..e9dbd54517 100644 --- a/include/configs/qemu-x86.h +++ b/include/configs/qemu-x86.h @@ -33,15 +33,6 @@ * - Only legacy IDE controller is supported for QEMU '-M pc' target * - AHCI controller is supported for QEMU '-M q35' target */ -#define CONFIG_SYS_IDE_MAXBUS 2 -#define CONFIG_SYS_IDE_MAXDEVICE 4 -#define CONFIG_SYS_ATA_BASE_ADDR 0 -#define CONFIG_SYS_ATA_DATA_OFFSET 0 -#define CONFIG_SYS_ATA_REG_OFFSET 0 -#define CONFIG_SYS_ATA_ALT_OFFSET 0 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x1f0 -#define CONFIG_SYS_ATA_IDE1_OFFSET 0x170 -#define CONFIG_ATAPI #define CONFIG_SPL_BOARD_LOAD_IMAGE diff --git a/include/configs/r2dplus.h b/include/configs/r2dplus.h index e3105fe53c..49dcdbe491 100644 --- a/include/configs/r2dplus.h +++ b/include/configs/r2dplus.h @@ -32,15 +32,7 @@ /* * IDE support */ -#define CONFIG_IDE_RESET 1 #define CONFIG_SYS_PIO_MODE 1 -#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */ -#define CONFIG_SYS_IDE_MAXDEVICE 1 -#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000 -#define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */ -#define CONFIG_SYS_ATA_DATA_OFFSET 0x1000 /* data reg offset */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */ /* * SuperH PCI Bridge Configration diff --git a/include/configs/sandbox.h b/include/configs/sandbox.h index 9e0e8c7056..86b93bcbe7 100644 --- a/include/configs/sandbox.h +++ b/include/configs/sandbox.h @@ -29,17 +29,6 @@ #define CONFIG_SANDBOX_SDL #endif -#ifndef CONFIG_SPL_BUILD -#define CONFIG_SYS_IDE_MAXBUS 1 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0 -#define CONFIG_SYS_IDE_MAXDEVICE 2 -#define CONFIG_SYS_ATA_BASE_ADDR 0x100 -#define CONFIG_SYS_ATA_DATA_OFFSET 0 -#define CONFIG_SYS_ATA_REG_OFFSET 1 -#define CONFIG_SYS_ATA_ALT_OFFSET 2 -#define CONFIG_SYS_ATA_STRIDE 4 -#endif - #define CONFIG_SCSI_AHCI_PLAT #define CONFIG_SYS_SCSI_MAX_DEVICE 2 #define CONFIG_SYS_SCSI_MAX_SCSI_ID 8 diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index 7b45d578a3..4967429775 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -21,7 +21,6 @@ CONFIG_AT91SAM9M10G45EK CONFIG_AT91_GPIO_PULLUP CONFIG_AT91_LED CONFIG_AT91_WANTS_COMMON_PHY -CONFIG_ATAPI CONFIG_ATMEL_LCD CONFIG_ATMEL_LCD_BGR555 CONFIG_ATMEL_LCD_RGB565 @@ -440,7 +439,6 @@ CONFIG_I2C_RTC_ADDR CONFIG_ICACHE CONFIG_ICS307_REFCLK_HZ CONFIG_IDE_PREINIT -CONFIG_IDE_RESET CONFIG_IMX CONFIG_IMX6_PWM_PER_CLK CONFIG_IMX_HDMI @@ -844,13 +842,6 @@ CONFIG_SYS_AT91_MAIN_CLOCK CONFIG_SYS_AT91_PLLA CONFIG_SYS_AT91_PLLB CONFIG_SYS_AT91_SLOW_CLOCK -CONFIG_SYS_ATA_ALT_OFFSET -CONFIG_SYS_ATA_BASE_ADDR -CONFIG_SYS_ATA_DATA_OFFSET -CONFIG_SYS_ATA_IDE0_OFFSET -CONFIG_SYS_ATA_IDE1_OFFSET -CONFIG_SYS_ATA_REG_OFFSET -CONFIG_SYS_ATA_STRIDE CONFIG_SYS_AUTOLOAD CONFIG_SYS_AUTOMATIC_SDRAM_DETECTION CONFIG_SYS_AUXCORE_BOOTDATA @@ -1416,8 +1407,6 @@ CONFIG_SYS_I2C_RTC_ADDR CONFIG_SYS_I2C_TCA642X_ADDR CONFIG_SYS_I2C_TCA642X_BUS_NUM CONFIG_SYS_ICACHE_INV -CONFIG_SYS_IDE_MAXBUS -CONFIG_SYS_IDE_MAXDEVICE CONFIG_SYS_IFC_ADDR CONFIG_SYS_IFC_CCR CONFIG_SYS_INIT_DBCR