From: Marek Vasut <marek.vasut+renesas@gmail.com>
Date: Mon, 3 Dec 2018 19:48:16 +0000 (+0100)
Subject: ARM: dts: rmobile: Extract CPLD node on H3 and M3W ULCB
X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=d2038b26e78bdac0931cf214c9b749fa13e0982c;p=u-boot.git

ARM: dts: rmobile: Extract CPLD node on H3 and M3W ULCB

The CPLD node is missing in Linux 4.17 DTs on H3/M3W ULCB, pull the
node into U-Boot specific DT until it hits mainline Linux, to make
syncing of DTs easier.

Signed-off-by: Marek Vasut <marek.vasut+renesas@gmail.com>
Cc: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
---
V2: Rebase on u-boot/master
---

diff --git a/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts b/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts
index 06bd4f24ca..5cb5e9c6fb 100644
--- a/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts
+++ b/arch/arm/dts/r8a7795-h3ulcb-u-boot.dts
@@ -7,3 +7,14 @@
 
 #include "r8a7795-h3ulcb.dts"
 #include "r8a7795-u-boot.dtsi"
+
+/ {
+	cpld {
+		compatible = "renesas,ulcb-cpld";
+		status = "okay";
+		gpio-sck = <&gpio6 8 0>;
+		gpio-mosi = <&gpio6 7 0>;
+		gpio-miso = <&gpio6 10 0>;
+		gpio-sstbz = <&gpio2 3 0>;
+	};
+};
diff --git a/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts b/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts
index a1d13ccf28..78bd4f26bd 100644
--- a/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts
+++ b/arch/arm/dts/r8a7796-m3ulcb-u-boot.dts
@@ -7,3 +7,14 @@
 
 #include "r8a7796-m3ulcb.dts"
 #include "r8a7796-u-boot.dtsi"
+
+/ {
+	cpld {
+		compatible = "renesas,ulcb-cpld";
+		status = "okay";
+		gpio-sck = <&gpio6 8 0>;
+		gpio-mosi = <&gpio6 7 0>;
+		gpio-miso = <&gpio6 10 0>;
+		gpio-sstbz = <&gpio2 3 0>;
+	};
+};
diff --git a/arch/arm/dts/ulcb.dtsi b/arch/arm/dts/ulcb.dtsi
index e16c7f245e..c805265343 100644
--- a/arch/arm/dts/ulcb.dtsi
+++ b/arch/arm/dts/ulcb.dtsi
@@ -24,15 +24,6 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	cpld {
-		compatible = "renesas,ulcb-cpld";
-		status = "okay";
-		gpio-sck = <&gpio6 8 0>;
-		gpio-mosi = <&gpio6 7 0>;
-		gpio-miso = <&gpio6 10 0>;
-		gpio-sstbz = <&gpio2 3 0>;
-	};
-
 	audio_clkout: audio-clkout {
 		/*
 		 * This is same as <&rcar_sound 0>