From: Sumit Garg Date: Thu, 4 Aug 2022 14:27:18 +0000 (+0530) Subject: gpio: qcom_pmic: Add support for GPIO LV/MV subtype X-Git-Url: http://git.dujemihanovic.xyz/img/sics.gif?a=commitdiff_plain;h=cf515842b9367266c873a0e037dcc7ee856ea0ab;p=u-boot.git gpio: qcom_pmic: Add support for GPIO LV/MV subtype GPIO LV (low voltage)/MV (medium voltage) subtypes have different features and register mappings than 4CH/8CH subtypes. Add support for LV and MV subtypes. With GPIO LV/MV subtype available, add "qcom,pms405-gpio" compatible which requires support for GPIO MV subtype. Signed-off-by: Sumit Garg --- diff --git a/drivers/gpio/qcom_pmic_gpio.c b/drivers/gpio/qcom_pmic_gpio.c index e9232a007f..3be1be8692 100644 --- a/drivers/gpio/qcom_pmic_gpio.c +++ b/drivers/gpio/qcom_pmic_gpio.c @@ -23,6 +23,15 @@ #define REG_TYPE 0x4 #define REG_SUBTYPE 0x5 +/* GPIO peripheral type and subtype out_values */ +#define REG_TYPE_VAL 0x10 +#define REG_SUBTYPE_GPIO_4CH 0x1 +#define REG_SUBTYPE_GPIOC_4CH 0x5 +#define REG_SUBTYPE_GPIO_8CH 0x9 +#define REG_SUBTYPE_GPIOC_8CH 0xd +#define REG_SUBTYPE_GPIO_LV 0x10 +#define REG_SUBTYPE_GPIO_MV 0x11 + #define REG_STATUS 0x08 #define REG_STATUS_VAL_MASK 0x1 @@ -33,6 +42,10 @@ #define REG_CTL_MODE_INOUT 0x20 #define REG_CTL_MODE_OUTPUT 0x10 #define REG_CTL_OUTPUT_MASK 0x0F +#define REG_CTL_LV_MV_MODE_MASK 0x3 +#define REG_CTL_LV_MV_MODE_INPUT 0x0 +#define REG_CTL_LV_MV_MODE_INOUT 0x2 +#define REG_CTL_LV_MV_MODE_OUTPUT 0x1 #define REG_DIG_VIN_CTL 0x41 #define REG_DIG_VIN_VIN0 0 @@ -40,6 +53,10 @@ #define REG_DIG_PULL_CTL 0x42 #define REG_DIG_PULL_NO_PU 0x5 +#define REG_LV_MV_OUTPUT_CTL 0x44 +#define REG_LV_MV_OUTPUT_CTL_MASK 0x80 +#define REG_LV_MV_OUTPUT_CTL_SHIFT 7 + #define REG_DIG_OUT_CTL 0x45 #define REG_DIG_OUT_CTL_CMOS (0x0 << 4) #define REG_DIG_OUT_CTL_DRIVE_L 0x1 @@ -49,6 +66,7 @@ struct qcom_gpio_bank { uint32_t pid; /* Peripheral ID on SPMI bus */ + bool lv_mv_type; /* If subtype is GPIO_LV(0x10) or GPIO_MV(0x11) */ }; static int qcom_gpio_set_direction(struct udevice *dev, unsigned offset, @@ -56,6 +74,7 @@ static int qcom_gpio_set_direction(struct udevice *dev, unsigned offset, { struct qcom_gpio_bank *priv = dev_get_priv(dev); uint32_t gpio_base = priv->pid + REG_OFFSET(offset); + uint32_t reg_ctl_val; int ret; /* Disable the GPIO */ @@ -64,16 +83,31 @@ static int qcom_gpio_set_direction(struct udevice *dev, unsigned offset, if (ret < 0) return ret; - /* Select the mode */ - if (input) - ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL, - REG_CTL_MODE_INPUT); - else - ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL, - REG_CTL_MODE_INOUT | (value ? 1 : 0)); + /* Select the mode and output */ + if (priv->lv_mv_type) { + if (input) + reg_ctl_val = REG_CTL_LV_MV_MODE_INPUT; + else + reg_ctl_val = REG_CTL_LV_MV_MODE_INOUT; + } else { + if (input) + reg_ctl_val = REG_CTL_MODE_INPUT; + else + reg_ctl_val = REG_CTL_MODE_INOUT | !!value; + } + + ret = pmic_reg_write(dev->parent, gpio_base + REG_CTL, reg_ctl_val); if (ret < 0) return ret; + if (priv->lv_mv_type && !input) { + ret = pmic_reg_write(dev->parent, + gpio_base + REG_LV_MV_OUTPUT_CTL, + !!value << REG_LV_MV_OUTPUT_CTL_SHIFT); + if (ret < 0) + return ret; + } + /* Set the right pull (no pull) */ ret = pmic_reg_write(dev->parent, gpio_base + REG_DIG_PULL_CTL, REG_DIG_PULL_NO_PU); @@ -118,19 +152,30 @@ static int qcom_gpio_get_function(struct udevice *dev, unsigned offset) uint32_t gpio_base = priv->pid + REG_OFFSET(offset); int reg; - /* Set the output value of the gpio */ reg = pmic_reg_read(dev->parent, gpio_base + REG_CTL); if (reg < 0) return reg; - switch (reg & REG_CTL_MODE_MASK) { - case REG_CTL_MODE_INPUT: - return GPIOF_INPUT; - case REG_CTL_MODE_INOUT: /* Fallthrough */ - case REG_CTL_MODE_OUTPUT: - return GPIOF_OUTPUT; - default: - return GPIOF_UNKNOWN; + if (priv->lv_mv_type) { + switch (reg & REG_CTL_LV_MV_MODE_MASK) { + case REG_CTL_LV_MV_MODE_INPUT: + return GPIOF_INPUT; + case REG_CTL_LV_MV_MODE_INOUT: /* Fallthrough */ + case REG_CTL_LV_MV_MODE_OUTPUT: + return GPIOF_OUTPUT; + default: + return GPIOF_UNKNOWN; + } + } else { + switch (reg & REG_CTL_MODE_MASK) { + case REG_CTL_MODE_INPUT: + return GPIOF_INPUT; + case REG_CTL_MODE_INOUT: /* Fallthrough */ + case REG_CTL_MODE_OUTPUT: + return GPIOF_OUTPUT; + default: + return GPIOF_UNKNOWN; + } } } @@ -154,8 +199,14 @@ static int qcom_gpio_set_value(struct udevice *dev, unsigned offset, uint32_t gpio_base = priv->pid + REG_OFFSET(offset); /* Set the output value of the gpio */ - return pmic_clrsetbits(dev->parent, gpio_base + REG_CTL, - REG_CTL_OUTPUT_MASK, !!value); + if (priv->lv_mv_type) + return pmic_clrsetbits(dev->parent, + gpio_base + REG_LV_MV_OUTPUT_CTL, + REG_LV_MV_OUTPUT_CTL_MASK, + !!value << REG_LV_MV_OUTPUT_CTL_SHIFT); + else + return pmic_clrsetbits(dev->parent, gpio_base + REG_CTL, + REG_CTL_OUTPUT_MASK, !!value); } static const struct dm_gpio_ops qcom_gpio_ops = { @@ -177,13 +228,17 @@ static int qcom_gpio_probe(struct udevice *dev) /* Do a sanity check */ reg = pmic_reg_read(dev->parent, priv->pid + REG_TYPE); - if (reg != 0x10) + if (reg != REG_TYPE_VAL) return log_msg_ret("bad type", -ENXIO); reg = pmic_reg_read(dev->parent, priv->pid + REG_SUBTYPE); - if (reg != 0x5 && reg != 0x1) + if (reg != REG_SUBTYPE_GPIO_4CH && reg != REG_SUBTYPE_GPIOC_4CH && + reg != REG_SUBTYPE_GPIO_LV && reg != REG_SUBTYPE_GPIO_MV) return log_msg_ret("bad subtype", -ENXIO); + priv->lv_mv_type = reg == REG_SUBTYPE_GPIO_LV || + reg == REG_SUBTYPE_GPIO_MV; + return 0; } @@ -203,6 +258,7 @@ static const struct udevice_id qcom_gpio_ids[] = { { .compatible = "qcom,pm8916-gpio" }, { .compatible = "qcom,pm8994-gpio" }, /* 22 GPIO's */ { .compatible = "qcom,pm8998-gpio" }, + { .compatible = "qcom,pms405-gpio" }, { } };